FH26-41S-0.3SHW [HRS]

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors; 0.3毫米接触间距为1mm的板，柔性印刷电路ZIF连接器上方


型号：	FH26-41S-0.3SHW
厂家：	HRS
描述：	0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors 0.3毫米接触间距为1mm的板，柔性印刷电路ZIF连接器上方连接器集管和边缘连接器 PC
文件：	总16页 (文件大小：650K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

FH26 Series

Space saving(51 pos. shown)

ꢀ

3.2mm

Metal fittings do no protrude

outside of the connector body

ꢀFeatures

Can be mounted over conductive traces.

ꢀ

1. Extremely light weight

The typical version, with all 51 contacts loaded, weights

only 0.1 grams.

2. Easy solderability on the PC board

The soldering leads are on 0.6 mm pitch, exiting on front

and back of the connector.

No exposed contacts on the bottom

of the connector

3. Conductive traces on the PCB can run under

the connector

No exposed contacts on the bottom of the connector.

Operation

ꢀ

4. Easy FPC insertion and reliable electrical

connection

(1) Actuator open

(2) Insert FPC

Proven Flip LockR actuator allows easy insertion of FPC.

Tactile sensation when fully closed confirms complete

electrical and mechanical connection.

A ccttuuaattoorr

5. Accepts standard thickness FPC

0.2mm thick standard Flexible Printed Circuit board can

be used.

This is the only ultra-low profile ZIF connector allowing

the use of standard FPC.

6. Board placement with automatic equipment

Flat top surface and packaging on the tape-and-reel

allows use of vacuum nozzles.

FPC

Standard reel contains 5,000 connectors.

ꢀApplications

(3) Close the actuator

(4) FPC connected

Mobile phones, PDA's, digital cameras, digital video

cameras, LCD connections, plasma displays (PDP), camera

modules and other compact devices requiring Flexible

Printed Circuit connections using high reliability ultra-small

profile connectors.

2004.8

ꢀSpecifications

Operating temperature range -55

to +85 (Note 1)

ç ç

Current rating

Voltage rating

0.2A DC

30V AC

Storage temperature range -10

Storage humidity range

to +50

(Note 2)

Rating

Operating humidity range

Relative humidity 90%

max. (No condensation)

Relative humidity 90% max.

Thickness: = 0.2 0.03mm tin-lead plated (Note 3)

Recommended FPC :

Item

Specification

50 M ohms min.

Conditions

1. Insulation resistance

2. Withstanding voltage

100 V DC

No flashover or insulation breakdown.

90 V AC /one minute

100 m ohms max.

* Including FPC conductor resistance

3. Contact resistance

1 mA

4. Durability

Contact resistance: 100 m ohms max.

No damage, cracks, or parts dislocation.

10 cycles

(Insertion/ withdrawal)

No electrical discontinuity of 1µs or more.

Contact resistance: 100 m ohms max.

No damage, cracks, or parts dislocation.

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3

directions.

5. Vibration

6. Shock

No electrical discontinuity of 1µs. min.

Contact resistance: 100 m ohms max.

No damage, cracks, or parts dislocation.

Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,

3 cycles in each of the 3 axis

Contact resistance: 100 m ohms max.

Insulation resistance: 50 M ohms min.

No affect on appearance or performance.

7. Humidity

(Steady state)

96 hours at temperature of 40 2ç and humidity of 90% to 95%.

Contact resistance: 100 m ohms max.

Insulation resistance: 50 M ohms min.

No damage, cracks, or parts looseness.

Temperature: -55 ç/+15ç to +35ç/+85ç/+15ç to +35ç

Time: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)

5 cycles

8. Temperature cycle

Reflow: At the recommended temperature profile

Manual soldering: 350ç +/-10ç for 5 1 seconds

9. Resistance to soldering heat

No deformation of components affecting performance.

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range

and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: When FPC is gold plated, the connector contacts must be also gold plated: Specify the (05) plating code.

ꢀMaterials

Part

Material

LCP

Finish

Remarks

UL94V-0

Insulator

Actuator

Contacts

Metal fitting

Color: Black

Color: Dark brown

---------------

Tin-lead plated (Note 3)

Tin plated (Lead free)

Phosphor bronze

ꢀOrdering information

FH26 - 51S - 0.3 SHW (05)

1 Series name: FH26

4 Terminal type: SHW(SMT horizontal mounting)

No. of contacts: 13, 21, 23, 25, 27, 33, 35, 39,

41, 45, 51, 57, 71

Plating specifications

Blank: Tin-lead plated

(05) : Gold flash plated

Contact pitch: 0.3mm

ꢀConnector Dimensions

0.3

(0.12)

0.6

Number of contacts indicator

0.6

(0.12)

0.5

0.3

3.2

(D: FPC insertion slot dimension)

0.1

Notes

The coplanarity of each terminal lead within specified dimension is 0.1 mm.

Packaged on tape and reel only. Check packaging specification.

All dimensions: mm

D E

Part Number

CL No.

Number of Contacts

FH26-13S-0.3SHW

FH26-21S-0.3SHW

FH26-23S-0.3SHW

FH26-25S-0.3SHW

FH26-27S-0.3SHW

FH26-33S-0.3SHW

FH26-35S-0.3SHW

FH26-39S-0.3SHW

FH26-41S-0.3SHW

FH26-45S-0.3SHW

FH26-51S-0.3SHW

FH26-57S-0.3SHW

FH26-71S-0.3SHW

CL580-0209-3

CL580-0207-8

CL580-0203-7

CL580-0208-0

CL580-0204-0

CL580-0210-2

CL580-0205-2

CL580-0201-1

CL580-0206-5

CL580-0211-5

CL580-0200-9

CL580-0212-8

CL580-0202-4

5.4

3.0

5.4

3.6

4.23

6.63

4.9

7.3

7.8

6.0

8.4

6.0

6.6

7.23

7.9

9.0

6.6

7.2

7.83

8.5

9.6

7.2

7.8

8.43

9.1

11.4

12.0

13.2

13.8

15.0

16.8

18.6

22.8

9.0

9.6

10.23

10.83

12.03

12.63

13.83

15.63

17.43

21.63

10.9

11.5

12.7

13.3

14.5

16.3

18.1

22.3

9.6

10.2

11.4

12.0

13.2

15.0

16.8

21.0

10.8

11.4

12.6

14.4

16.2

20.4

Embossed tape reel packaging (5,000 pieces/reel).

Order by number of reels.

BRecommended PCB mounting pattern and metal mask dimensions

0.05

0.3 0.03

0.6 0.05

(0.23:Metal mask)

Outline of

the connector

0.3 0.05

0.6 0.05

(0.3:Metal mask)

0.4 0.05

0.3 0.05

(0.23:Metal mask)

0.05

0.5 0.05

Detail H

BRecommended FPC Dimensions

(Lead plated 0.1 MAX)

0.05

0.03

0.3 0.07

(0.15)

0.6 0.02

+0.04

-0.03

0.3

0.3 0.02

0.2 0.03

Ｂ

Ａ

+0.04

-0.03

0.3

0.1 0.02

(0.2)

(0.07)

0.6 0.07

0.03

0.6 0.07

Overlap between covering film layer and stiffener.

All dimensions: mm

Part Number

FH26-13S-0.3SHW

FH26-21S-0.3SHW

FH26-23S-0.3SHW

FH26-25S-0.3SHW

FH26-27S-0.3SHW

FH26-33S-0.3SHW

FH26-35S-0.3SHW

FH26-39S-0.3SHW

FH26-41S-0.3SHW

FH26-45S-0.3SHW

FH26-51S-0.3SHW

FH26-57S-0.3SHW

FH26-71S-0.3SHW

CL No.

Number of Contacts

CL580-0209-3

CL580-0207-8

CL580-0203-7

CL580-0208-0

CL580-0204-0

CL580-0210-2

CL580-0205-2

CL580-0201-1

CL580-0206-5

CL580-0211-5

CL580-0200-9

CL580-0212-8

CL580-0202-4

3.0

3.6

6.0

4.2

5.4

6.6

6.0

6.6

7.2

6.6

7.2

7.8

7.2

7.8

8.4

9.0

9.6

10.2

10.8

12.0

12.6

13.8

15.6

17.4

21.6

9.6

10.2

11.4

12.0

13.2

15.0

16.8

21.0

10.8

11.4

12.6

14.4

16.2

20.4

BPackaging Specification

Embossed Carrier Tape Dimensions (Tape width of 24mm max.)

ꢀ

0.1

0.15

(1.6)

(0.3)

(3.05)

(4.55)

Flat surface, for placement with automatic equipment

Unreeling direction

(1.25)

All dimensions: mm

Part Number

FH26-13S-0.3SHW

FH26-21S-0.3SHW

FH26-23S-0.3SHW

FH26-25S-0.3SHW

FH26-27S-0.3SHW

FH26-33S-0.3SHW

FH26-35S-0.3SHW

FH26-39S-0.3SHW

FH26-41S-0.3SHW

FH26-45S-0.3SHW

FH26-51S-0.3SHW

CL No.

Number of Contacts

CL580-0209-3

CL580-0207-8

CL580-0203-7

CL580-0208-0

CL580-0204-0

CL580-0210-2

CL580-0205-2

CL580-0201-1

CL580-0206-5

CL580-0211-5

CL580-0200-9

7.5

5.6

16.5

24.5

7.5

8.0

7.5

8.6

7.5

9.2

7.5

9.8

11.5

11.6

12.2

13.4

14.0

15.2

17.0

5, 000 pieces per reel.

Embossed Carrier Tape Dimensions (Tape width of 32mm min.)

ꢀ

(1.6)

(0.3)

1.5 ^+0.1

(3.05)

(4.55)

Unreeling direction

Flat surface, for placement with automatic equipment

(1.25)

All dimensions: mm

Part Number

FH26-57S-0.3SHW

FH26-71S-0.3SHW

CL No.

Number of Contacts

CL580-0212-8

CL580-0202-4

28.4

40.4

14.2

20.2

18.8

23.0

32.5

44.5

Reel Dimensions

ꢀ

(2)

(L)

Unreeling direction

End section

Mounting section

Lead section (400mm min.)

Connectors

Embossed carrier tape

Blank section

(10 pockets min.)

Blank section

(10 pockets min.)

Top cover tape

BRecommended Temperature Profile

Using Typical Solder Paste

ꢀ

HRS test conditions

Solder method

5 sec. m ax.

240℃

:Reflow, IR/hot air

250

200

150

100

(Nihon Den-netsu Co., Ltd.'s

Part Number: SENSBY NR-2)

:Room air

Environment:

200℃

Solder composition: :Paste, 63%Sn/37%Pb

(Senju Metal Industry, Co., Ltd.'s

Part Number: OZ63-201C-50-9)

Glass epoxy 25mm 50mm 0.8mm thick

160℃

150℃

Test board

Land dimensions

Metal mask

∞

（℃）

:0.3mm∞0.65mm,0.3mm∞0.8mm

:0.23∞0.55∞0.1mm thick,

0.23∞0.65∞0.1mm thick

The temperature profiles are based on the above conditions.

In individual applications the actual temperature may

vary,depending on solder paste type, volume/thickness and

board size/thickness. Consult your solder paste and

equipment manufacturer for specific recommendations.

（30sec.）

20 sec. to

30 sec.

25℃

（60sec.） 60 sec. to 90 sec.

Preheating

120

Tim e (Seconds)

Soldering

Start

Using Lead-free Solder Paste

ꢀ

HRS test conditions

Solder method

M AX 250℃

230℃

:Reflow, IR/hot air

250

200

150

100

(Nihon Den-netsu Co., Ltd.'s

Part Number: SENSBY NR-NR-2)

:Room air

Environment

200℃

Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.'s

Part Number: M705-221CM5-42-10.5)

Test board

Land dimensions

Metal mask

Glass epoxy 25mm 0.8mm thick

∞

50mm

∞

150℃

:0.3mm 0.65mm, 0.3mm∞0.8mm

∞

（℃）

:0.23

0.23

∞

0.55

∞

0.1mm thick,

0.1mm thick

∞0.65

∞

The temperature profiles are based on the above conditions.

In individual applications the actual temperature may vary,

depending on solder paste type, volume/thickness and board

size/thickness. Consult your solder paste and equipment

manufacturer for specific recommendations.

25℃

（60sec.） 90 sec. to 120 sec.

（60sec.）

Soldering

Preheating

120

Tim e (Seconds)

Start

BRecommended FPC Construction

Contact FPC manufacturer for specific details.

ꢀ

1. Using Single-sided FPC

Material Name

Covering film layer.

Cover adhesive

Surface treatment

Copper foil

Material

Polyamide 1 mil thick.

Thickness (µm)

Connecting side

Tin-lead plated

1/2oz

205

Base adhesive

Base film

Thermosetting adhesive

Polyamide

1 mil thick

Reinforcement material adhesive Thermosetting adhesive

Stiffener

Polyamide

Total

3 mil thick

Back side

2. Using Double-sided FPC

Material Name

Material

Polyamide 1 mil thick

Thickness (µm)

Connecting side

Covering layer film

Cover adhesive

Surface treatment

Through-hole copper

Copper foil

Tin-lead plated

199

1/2oz

Base adhesive

Base film

Thermosetting adhesive

Polyamide

Thermosetting adhesive

Cu 1/2oz

Thermosetting adhesive

Polyamide 1 mil thick

1 mil thick

Base adhesive

Copper foil

Cover adhesive

Covering layer film

Reinforcement material adhesive Thermosetting adhesive

Stiffener

Polyamide

Total

1 mil thick

Back side

To prevent release of the FPC due to it's bending, use of double sided FPC with copper foil on the back side is NOT RECOMMENDED.

ꢀ

BOperation and Precautions

Operation

1.FPC insertion procedure. Connector installed on the board.

1 Lift up the actuator. Use thumb or index finger.

2 Fully insert the FPC in the connector parallel to

mounting surface, with the exposed conductive

traces facing down.

FPC conductor

surface (Bottom side)

3 Rotate down the actuator until firmly closed. It is

critical that the inserted FPC is not moved and

remains fully inserted.

2.FPC removal

1 Lift up the actuator. Carefully withdraw the

FPC.

Precautions

Exercise care when handling connectors. Follow recommendations given below.

PC board flexing

SPC board connector mounting area

The connectors are straight within 0.1 mm max.

Make sure that the PC board connector mounting area flatness can accept the connector terminals without

causing any failure of the solder joints.

SHandling before mounting on PCB

Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.

SPC Board handling

Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting

soldered joints.

Connector

PCB

Precautions When Inserting or Coupling FPC

Pay attention to the following points when inserting FPC.

SActuator operation

Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure

that the force is applied only to the actuator itself, avoiding touching of the contacts.

Actuator

Damage to the contacts

Damage

Axis of rotation

2 Axis of rotation

Assure free rotation of

the actuator

Precautions

135˚

3 The actuator will rotate 135 degrees

maximum. Do not apply force to rotate

further.

4 When operating the actuator, do so at the

center portion.

As illustrated, do not attempt removal or re-

positioning of the actuator.

S FPC Insertionq

The FPC should be aligned parallel with the board surface and perpendicular with the connector (as

shown), then completely inserted.

Perpendicular with

the connector

To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.

Make sure that the FPC is NOT MOVED during the closing of the actuator.

Precautions

SFPC Insertionw

Do not insert the FPC at any angle from above.

As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.

*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space

at the time of board layout. Insertion will be difficult when the FPC is too short.

*Contact the FPC manufacturer for information about the bending specifications.

SVerification of the fully closed actuator.

The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.

Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should

not exceed 1 N.

Routing the FPC (FPC fully inserted/ actuator closed)

SFPC Load

Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend the

FPC too close to the actuator.

Load: 0.05N/pin max.

Precautions

Removing the FPC

Rotate the actuator to the open position (maximum open angle of 135°). Carefully withdraw the FPC.

135˚

Other Precautions

SHand Soldering Precautions

When hand soldering:

Do not perform reflow or hand soldering with the FPC inserted in the connector.

Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.

Do not use excessive amount of solder or flux compounds.

Operation of the actuator and contacts may be affected by excessive amounts of solder or flux

compounds.

NOTES

NOTES :

GERMANY:

HIROSE ELECTRIC GmbH

Zeppelinstrasse 42 D-73760 Ostfildern Kemnat

Phone : 49 711 4560021

Fax : 49 711 4560729

THE NETHERLANDS:

USA:

HIROSE ELECTRIC EUROPE B.V.

Beechavenue 46.1119PV

Schiphol-Rijk

Phone : 31 20 6557460

Fax : 31 20 6557469

HIROSE ELECTRIC U.S.A., INC.

2688 Westhills Court, Simi Valley, CA 93065-6235

Phone : 1 805 522 7958

Fax : 1 805 522 3217

http://www.hirose.de

http://www.hiroseusa.com

http://www.hiroseeurope.com

UNITED KINGDOM:

CHINA:

KOREA:

HIROSE ELECTRIC UK LTD.

HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD.

3705,Bund Center,222 Yan An Road(E),Shanghai 20002

Phone : 86 21 6335 2538

HIROSE KOREA CO., LTD.

Crownhill Business Centre 22 Vincent Avenue

Crownhill, Milton Keynes MK8 OAB

Phone : 44 1908 305400

(#2NA311,Shihwa Industrial Complex),

1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do

Phone : 82 31 496 7000,7124

Fax : 82 31 496 7100

Fax : 86 21 6335 0767

Fax : 44 1908 305401

http://www.hirose.co.uk

http://www.hirose.co.kr

HONG KONG:

SINGAPORE:

TAIWAN:

HIROSE ELECTRIC CO., LTD.

Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha

Tsui East, Kowloon

Phone : 852 2803 5338

Fax : 852 2591 6560

HIROSE ELECTRIC CO., LTD.

10 Anson Road #34-13 International Plaza 079903

Phone : 65 6324 6113

HIROSE ELECTRIC TAIWAN CO., LTD.

No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei

Phone : 886 2 2557 7351,7352

Fax : 886 2 2552 9851

65 6324 6123

Fax :

5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN

PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933

http://www.hirose.com

http://www.hirose-connectors.com

The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.

FH26-41S-0.3SHW [HRS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E