FH33J-12S-1SH [HRS]
Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE;型号: | FH33J-12S-1SH |
厂家: | HRS |
描述: | Card Edge Connector, 6 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE |
文件: | 总16页 (文件大小:353K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH33 Series
Increased FPC retention force
Small size
ꢀ
2.5mm
[
]
30 pos.
Metal fittings (Leadless)
ꢀFeatures
Can be mounted over conductive traces.
ꢀ
1. Low-profile, small PCB mounting area
Narrow width of only 2.5 mm reduced the board footprint
by approximately 17% to 57%, as compared to several
similar FH Series HRS connectors.
2. Various contact pitch (0.4mm, 0.5mm, 1mm
pitch) available
No exposed contacts on the bottom of the connector
In addition to standard 0.5mm pitch, 0.4mm pitch, 1mm
pitch also available.
3. Increased FPC/FFC retention force
_ In the horizontal direction: Approximately 2.0 times
(compared to 0.5mm pitch FH12 series.)
Simple operation
ꢀ
1 Open the actuator
2 Insert FPC
_ In the vertical direction: Approximately 1.7 times
(compared to 0.5mm pitch FH19 series.)
Accttuuaattoorr
1
4. Conductive traces on the PCB can run
under the connector
No exposed contacts on the bottom of the connector.
5. One finger operation of the actuator
Proven (in several other Hirose’s connectors) Flip-Lock®
rotating actuator assures reliable mechanical and
electrical connection with FPC/FFC, confirming it with a
definite tactile feel.
2
FPC
6. Easy FPC insertion and reliable electrical connection
Proven Flip Lock actuator allows easy insertion of FPC/FFC
and provides a tactile sensation when fully closed,
confirming complete electrical and mechanical connection.
Locked condition
ꢀ
3 Close the actuator
4 FPC connected
7. Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) and
Flexible Flat Cable (FFC) can be used.
8. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate
vacuum pick-up and placement.
3
3
Standard reel packaging contains 5000 connectors.
9. Halogen-free*
4
(FH33J Series)
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum,
Cl + Br combined-1,500ppm maximum
201007.49
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀProduct Specifications
Current rating
(0.4mm pitch type 0.4A)
Voltage rating
(0.4mm pitch type 40V AC)
0.5 A
Operating temperature range -55 ç to +85ç (Note 1)
Operating humidity range
Storage temperature range -10ç to +50ç (Note 2)
Relative humidity 90% max. Storage humidity range Relative humidity 90% max.
Ratings
50 V AC
(No condensation)
(No condensation)
Recommended FPC
Thickness = 0.3 0.05mm gold plated (under 30 pos.), 0.3 0.03mm gold plated (over 31 pos.)
Specification Conditions
Item
1. Insulation resistance 500 Mø min.
100 V DC
2. Withstanding voltage No flashover or insulation breakdown.
50 mø max.
150 V AC /one minute, 120 V AC /one minute(0.4mm pitch type)
3. Contact resistance
100 mø max(0.4mm pitch type).
1 mA
* Including FPC conductor resistance
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
4. Durability
(insertion/ withdrawal)
20 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in
each of the 3 directions.
No electrical discontinuity of 1µs or more.
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
No damage, cracks, or parts dislocation.
5. Vibration
6. Shock
2
Acceleration of 981 m/s , 6 ms duration, sine half-wave waveform,
3 cycles in each of the 3 axis
7. Humidity
(Steady state)
96 hours at 40ç and humidity of 90% to 95%.
Contact resistance: 50 mø max.
100 mø max(0.4mm pitch type).
Insulation resistance: 50 Mø min.
+
+
+
+
+
Temperature : -55ç/ 15ç to 35ç/ 85ç/ 15ç to 35ç
8. Temperature cycle
Time
: 30 / 2 to 3 / 30 / 2 to 3 (Minutes)
No damage, cracks, or parts dislocation.
5 cycles
Reflow
: At the recommended temperature profile
9. Resistance to
soldering heat
No deformation of components affecting performance.
Manual soldering: 350ç 10ç for 5 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term ”storage” refers to products stored for long period of time prior to mounting and use. Operating Temperature Range
and Humidity range covers non- conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
ꢀMaterials
Part
Material
PA
Finish
Color:Beige
Remarks
UL94V-0
FH33 series
FH33J series
FH33M series
Color:Deep brown
Color:Beige
LCP
PPS
LCP
PA
Color:Black
Insulator
Color:Beige
Color:Deep brown
Color:Beige
LCP
PPS
FH33MHJ series
Color:Black
Contacts
Metalfittings
Gold flash plated
Pure tin reflow plated
-----
-----
Phosphor bronze
ꢀOrdering information
( )
( )
FH 33 M H J - 12 6 S B - 1 SH 10
2
1
3
4
5
6
7
8
9
10
11
12
Series name:FH
Series No:33
Blank:Width 3.0mm(standard)
Standard type:Blank
Contact pitch:
1
2
3
4
5
7
10
M:Width 3.5mm(long actuator type)
Blank:Standard
Eccentric type:Nomber of contacts
Contact alignment:S: single
Eccentric direction:
0.4mm,0.5mm,1mm
SH:SMT horizontal mounting
Plating specifications:
Blank:Gold plated
Blank:0.5mm pitch,1mm pitch
M:0.4mm pitch
8
9
11
12
J:Halogen-free
Flame retardance UL94V-0
Standard type:Nomber of contacts
Eccentric type:Number of contacts in
1mm housing
Blank:standard type
B:Eccentric type
(10) Gold plated with
nickel barrier
6
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀConnector Dimensions
0.4mm pitch, 0.5mm pitch type
ꢀ
A
0.15
B
G
Lot No. indicator
∞Number of contacts
0.15 G
(0.15)
T
A**
Polarizing mark indicator
Number of contacts indicator
(0.15)
F
(C: FPC insertion slot dimension)
0.1
D
F
Notes
1
2
3
4
5
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension
from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not
affect form, fit or function of the connector.
0
0
0.5 0.1
0.55 0.1
a
1
2
0.15MAX
(1.1)
0.25 0.1
0.15MAX
1
2
1.73 0.2
2.2 0.15
+0.15
0.3
3
–0.1
6
After reflow, the terminal plating may change color, however
this does not represent a quality issue.
Unit: mm
A
Part Number
CL No.
Number of Contacts
B
2.5
4
C
D
T
U
4.35
5.85
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.95
3.57
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
6
5
6.5
7
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
5.07
9
5.57
6.35
4.5
5.5
6.5
9
10
12
14
19
20
26
28
30
32
36
40
45
16
4
6.57
7.35
8
7.57
8.35
9
10.07
10.57
13.57
14.57
15.57
16.57
18.57
20.57
23.07
6.87
10.85
11.35
14.35
15.35
16.35
17.35
19.35
21.35
23.85
7.65
11.5
12
15
16
17
18
20
22
24.5
8.3
4
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22
6
2.57
3.35
1.5
4.5
5.5
7.5
8.5
9
5.57
6.35
10
12
16
18
19
40
65
7
6.57
7.35
8
8.57
9.35
10
11
11.5
22
27.9
9.57
10.35
10.85
21.35
27.25
10.07
20.57
26.47
19.5
25.6
Note 1: (**) : Plating specification. Refer to ordering information.
Note 2: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀConnector Dimensions
1mm pitch type
ꢀ
A
0.15
B
(1.75)�
(V)�
G
∞Number of contacts
(0.15)�
1
0.15 G
Lot No. indicator
A**
△
HRS mark
Cav No.
Number of contacts indicator
Polarizing mark indicator
(0.15)�
(C: FPC insertion slot dimension)
0.1
F
D
F
Notes
1
2
3
4
5
The coplanarity of each terminal lead is within 0.1 max.
The contact terminal lead position indicates the dimension
from the bottom a surface of the insulator body.
Difference of each terminal lead is within 0.1 max.
Slight variations in color of the plastic compounds do not
affect form, fit or function of the connector.
0
0
0.5 0.1
0.55 0.1
a
1
2
0.15MAX
(1.1)
0.25 0.1
0.15MAX
1
2
1.73 0.2
2.2 0.15
+0.15
0.3
3
_0.1
6
After reflow, the terminal plating may change color, however
this does not represent a quality issue.
Unit: mm
A
Part Number
CL No.
Number of Contacts
B
3
5
5
C
D
V
FH33-4S-1SH(**)
580-1322-1-**
580-1323-4-**
580-1326-2-**
4
6
6
6.5
8
5.07
6.57
6.57
5.85
7.35
7.35
1.75
1.25
1.25
FH33-12(6)SB-1SH(**)
FH33J-12(6)SB-1SH(**)
8
Note 1: (**) : Plating specification. Refer to ordering information.
Note 2: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended PCB mounting pattern and metal mask dimensions
0.4mm pitch, 0.5mm pitch type
ꢀ
B
H
∞Number of contacts
0.1 H
0.3 0.05(Land)
T
0.25 0.05(Metal mask)
(0.2)
J
0.1
0.1
(0.2)
K
(A)
ꢀRecommended FPC dimensions
0.4mm pitch, 0.5mm pitch type
ꢀ
L
0.05
0.03
T
0.07
B
T
0.03
0.35 0.03(FPC)
0.3 0.03(FFC)
0.27 0.03(0.4mm pitch)
<under 30 pos.>0.3 0.05
<over 31 pos.>0.3 0.03
Note 1: If the stiffener is less than 3.3 mm, E dimension must be 0.5 mm min.
Unit: mm
Part Number
CL No.
Number of Contacts
A
5
B
2.5
4
J
K
L
T
4.9
3.5
5
3.8
5.3
5.8
6.8
7.8
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
6
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
6.4
9
6.5
7
6.9
5.5
6.5
7.5
10
4.5
5.5
6.5
9
10
12
14
19
20
26
28
30
32
36
40
45
16
4
7.9
8
8.9
9
10.3
10.8
13.8
14.8
15.8
16.8
18.8
20.8
23.3
7.1
11.4
11.9
14.9
15.9
16.9
17.9
19.9
21.9
24.4
8.2
11.5
12
15
16
17
18
20
22
24.5
8.3
4
10.5
13.5
14.5
15.5
16.5
18.5
20.5
23
9.5
12.5
13.5
14.5
15.5
17.5
19.5
22
6.8
2.5
5.5
6.5
8.5
9.5
10
6
2.8
3.9
1.5
4.5
5.5
7.5
8.5
9
5.8
6.9
10
12
16
18
19
40
65
7
6.8
7.9
8
8.8
9.9
10
11
11.5
22
27.9
9.8
10.9
11.4
21.9
27.8
10.3
20.8
26.7
20.5
26.4
19.5
25.6
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended PCB mounting pattern and metal mask dimensions
1mm pitch type
ꢀ
B
H
∞Number of contacts
0.3 0.05(Land)
0.25 0.05(Metal mask)
1
0.1 H
(0.2)�
1.15 0.1
W
0.1
(0.2)�
J
0.1
0.1
K
(A)�
*Recommended metal mask thickness = 0.12mm
ꢀRecommended FPC dimensions
1mm pitch type
ꢀ
L
0.1
0.1
X
0.1
1
0.1
B
<under 30 pos.>0.3 0.05
<over 31 pos.>0.3 0.03
0.65 0.1
1
0.1
Unit: mm
Part Number
CL No.
Number of Contacts
A
6.5
8
B
J
K
L
W
X
1
FH33-4S-1SH(**)
580-1322-1-**
580-1323-4-**
580-1326-2-**
4
6
6
3
5
5
5.3
6.8
6.8
6.4
7.9
7.9
5
1.15
0.65
0.65
FH33-12(6)SB-1SH(**)
FH33J-12(6)SB-1SH(**)
6.5
6.5
0.5
0.5
8
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀFH33 Series FPC/FFC Construction (Recommended Specifications)
1. Using Single-sided FPC
Material Name
Material
Thickness (µm)
Covering film layer
Cover adhesive
Polyimide 1 mil thick
(25)
(25)
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
Surface treatment
3
Copper foil
Base adhesive
Base film
Cu
1oz
35
25
Heat-hardened adhesive
Polyimide 1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
30
Stiffener
Polyimide 7 mil thick
Total
175
293
2. Using Double-sided FPC
Material Name
Material
Thickness (µm)
Covering film layer
Cover adhesive
Polyimide 1 mil thick
(25)
(25)
Nickel under plated 1 to 5µm /
Gold plated 0.2µm
Surface treatment
3
Through-hole copper
Copper foil
Cu
15
18
Cu
1/2oz
Base adhesive
Base film
Heat-hardened adhesive
Polyimide 1 mil thick
18
25
Base adhesive
Copper foil
Heat-hardened adhesive
18
Cu
1/2oz
18
Cover adhesive
Covering film layer
25
Polyimide 1 mil thick
25
Reinforcement material adhesive Heat-hardened adhesive
50
Stiffener
Polyimide 4 mil thick
Total
100
297
3. Using FFC
Material Name
Material
polyester thermoplastic type
Polyester
Thickness (µm)
Polyester film
Adhesive
(
)
12
30
(
)
Gold plated, soft copper film
Adhesive
35
30
12
30
Polyester
Adhesive
Polyester
Polyester
Total
Stiffener
188
295
π Practical tolerance of thickness dimension is 20 µm
4. Precautions
1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 ± 0.05).
2. For details about the construction, please contact the FPC/FFC manufacturers.
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀPackaging Specifications
Embossed Carrier Tape Dimensions
(Tape width up to 24mm)
Embossed Carrier Tape Dimensions
(Tape width 32mm and over)
ꢀ
ꢀ
4
0.1 2 0.15
8
0.1
(1.7)
(0.3)
4
0.1 2 0.15
8
0.1
(1.7)
(0.3)
(3)
(3.8)
Flat surface for
placement with
automatic equipment
(1)
1.5+0.1
(3)
(3.8)
0
Unreeling direction
Flat surface for
placement with
automatic equipment
(1)
Unreeling direction
Reel Dimensions
ꢀ
(R:INSIDE)
(S:OUTSIDE)
End section
Mounting section
Lead section (400 mm min.)
Embossed carrier tape
Blank section
Blank section
(10 pockets min.)
Top cover tape
(10 pockets min.)
Note: 5,000 pieces per reel.
Embossed tape 32 mm or wider will have perforated feed holes on two sides.
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Unit: mm
Part Number
CL No.
Number of Contacts
M
N
P
Q
R
S
--------
--------
--------
--------
--------
--------
--------
--------
--------
--------
28.4
5.3
6.8
FH33-6S-0.5SH (**)
FH33-9S-0.5SH (**)
FH33-10S-0.5SH (**)
FH33-12S-0.5SH (**)
FH33-14S-0.5SH (**)
FH33-19S-0.5SH (**)
FH33-20S-0.5SH (**)
FH33-26S-0.5SH (**)
FH33-28S-0.5SH (**)
FH33-30S-0.5SH (**)
FH33-32S-0.5SH (**)
FH33-36S-0.5SH (**)
FH33-40S-0.5SH (**)
FH33-45S-0.5SH (**)
FH33M-16S-0.4SH (**)
FH33J-4S-0.5SH (**)
FH33J-10S-0.5SH (**)
FH33J-12S-0.5SH (**)
FH33J-16S-0.5SH (**)
FH33J-18S-0.5SH (**)
FH33J-19S-0.5SH (**)
FH33J-40S-0.5SH (**)
FH33MHJ-65S-0.4SH (**)
FH33-4S-1SH (**)
580-1301-1-**
580-1303-7-**
580-1304-0-**
580-1302-4-**
580-1305-2-**
580-1307-8-**
580-1317-1-**
580-1306-5-**
580-1300-9-**
580-1312-8-**
580-1310-2-**
580-1311-5-**
580-1308-0-**
580-1316-9-**
580-1319-7-**
580-1329-0-**
580-1324-7-**
580-1328-8-**
580-1331-2-**
580-1334-0-**
580-1332-5-**
580-1330-0-**
580-1325-0-**
580-1322-1-**
580-1323-4-**
580-1326-2-**
6
16
16
16
16
16
24
24
24
24
24
32
32
44
44
24
16
16
16
24
24
24
44
44
16
16
16
7.5
7.5
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
45.4
45.4
25.4
17.4
17.4
17.4
25.4
25.4
25.4
45.4
45.4
17.4
17.4
17.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
49.4
49.4
29.4
21.4
21.4
21.4
29.4
29.4
29.4
49.4
49.4
21.4
21.4
21.4
9
7.3
7.5
10
12
14
19
20
26
28
30
32
36
40
45
16
4
8.3
7.5
9.3
7.5
11.8
12.3
15.3
16.3
17.3
18.3
20.3
22.3
24.8
8.6
11.5
11.5
11.5
11.5
11.5
14.2
14.2
20.2
20.2
11.5
7.5
28.4
40.4
40.4
--------
--------
--------
--------
--------
--------
--------
40.4
4.3
7.3
7.5
10
12
16
18
19
40
65
4
8.3
7.5
10.3
11.3
11.8
22.3
28.2
6.8
11.5
11.5
11.5
20.2
20.2
7.5
40.4
--------
--------
--------
8.3
7.5
6
FH33-12(6)S-1SH (**)
FH33J-12(6)S-1SH (**)
8.3
7.5
6
Note 1: Tape-and-reel packaging (5,000 pieces/reel).
Order by number of reels.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended Temperature Profile
Using Lead-free Solder paste
ꢀ
HRS test conditions
MAX 250ç
Solder method : Reflow, IR/hot air
Environment : Room air
250
200
150
100
50
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
230ç
(Senju Metal Industry, Co., Ltd.’s Part Number: M705-221CM5-32-10.5)
200ç
Test board
: Glass epoxy 25mm∞50mm∞0.8mm thick
Land dimensions : Contacts lead 0.3mm∞0.65mm
Metal fittings 0.55mm∞0.8mm
150ç
Metal mask
: Contacts lead 0.25mm∞0.65mm∞0.1mm thick
Metal fittings 0.55mm∞0.8mm∞0.1mm thick
(ç)
This temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type, volume/thickness and board
size/thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
25ç
(60 sec.)
90 to 120 sec.
(60 sec.)
Sodering
0
Preheating
Start
Time (Seconds)
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀOperation and Precautions
Operation
1.FPC insertion procedure. Connector installed on the board.
1 Lift up the actuator. Use thumb or index finger.
2 Fully insert the FPC in the connector parallel to
mounting surface, with the exposed conductive
traces facing down.
FPC conductor
surface (Bottom side)
3 Rotate down the actuator until firmly closed. It is
critical that the inserted FPC is not moved and
remains fully inserted.
2.FPC removal
1 Lift up the actuator. Carefully withdraw the
FPC.
11
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
Exercise care when handling connectors. Follow recommendations given below.
PC board flexing
SPC board connector mounting area
The connectors are straight within 0.1 mm max.
Make sure that the PC board connector mounting area flatness can accept the connector terminals without
causing any failure of the solder joints.
SHandling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
SPC Board handling
Exercise caution when handling boards with the connectors installed. Do not apply any forces affecting
soldered joints.
Connector
PCB
Precautions When Inserting or Removing FPC
Pay attention to the following points when inserting FPC.
SActuator operation
Do not apply excessive force when opening the actuator prior to FPC insertion. When opening make sure
that the force is applied only to the actuator itself, avoiding touching of the contacts.
1
Damege to the contacts
Damage to the contacts
2 Axis of rotation
Axis of rotation
Assure free rotation of
the actuator
3 The actuator will rotate 120 degrees
maximum. Do not force it to rotate further.
12
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
4 When operating the actuator, do so at the
center portion.
As illustrated, do not attempt removal or re-
positioning of the actuator.
5
S FPC Insertionq
The FPC should be aligned parallel with the board surface and perpendicular with the connector (as shown),
then completely inserted.
Actuator
Perpendicular with
the connector
FPC
To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.
Make sure that the FPC is NOT MOVED during the closing of the actuator.
SFPC Insertionw
When inserting the FPC, do not forcefully rub against the bottom surface of the connector insertion entrance.
Doing so will result in the contacts and FPC making strong contact and may cause deformation of the
contacts, peeling of the FPC conductor, and other problems.
Peeling of FPC
conductor
13
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5 mm,1mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
Precautions
SVerification of the fully closed actuator.
The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.
Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should
not exceed 1 N.
Routing the FPC (FPC fully inserted/ actuator closed)
SFPC Load
Do not apply force in excess of 0.15N max. in the upward direction (as illustrated). Do not bend the FPC
too close to the actuator.
Load: 0.15N max.
Removing the FPC
Rotate the actuator to the open position (maximum open angle of 120°). Carefully withdraw the FPC.
Other Precautions
SHand Soldering Precautions
When hand soldering:
1
2
3
Do not perform reflow or hand soldering with the FPC inserted in the connector.
Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
Do not use excessive amount of solder or flux compounds.
Operation of the actuator and contacts may be affected by excessive amounts of solder or flux
compounds.
14
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
:
NOTES
15
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
FH33 Seriesꢀ0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, 37677 Professional Center Drive, Suite #100C
Phone : 1-805-522-7958
Fax : 1-805-522-3217
http://www.hiroseusa.com
CA 95014
Livonia, MI 48154
Phone : 1-408-253-9640
Fax : 1-408-253-9641
http://www.hiroseusa.com
Phone : 1-734-542-9963
Fax : 1-734-542-9964
http://www.hiroseusa.com
GERMANY:
THE NETHERLANDS:
UK:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49-711-4560-02-1
Fax : 49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : 31-20-6557460
Fax : 31-20-6557469
http://www.hiroseeurope.com
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : 44-1908-369060
Fax : 44-1908-369078
http://www.hirose.co.uk
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE
A1001, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road, Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : 86-10-5165-9332
Huang Pu District, Shanghai 200001
Phone : 86-21-6391-3355
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : 86-755-8207-0851
Fax : 86-10-5908-1381
Fax : 86-21-6335-0767
Fax : 86-755-8207-0873
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
HONG KONG:
SINGAPORE:
TAIWAN:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Unit 1102 A&B, Energy Plaza, 92 Granville Road,
Tsim Sha Tsui East, Kowloon
Phone : 852-2803-5338
HIROSE ELECTRIC CO., LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : 65-6324-6113
65-6324-6123
Fax :
http://www.hirose-singapore.com.sg
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : 886-2-2555-7377
Fax : 886-2-2555-7350
Fax : 852-2591-6560
http://www.hirose-taiwan.com.tw
http://www.hirose-hongkong.com.hk
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : 82-31-496-7000,7124
Fax : 82-31-496-7100
http://www.hirose.co.kr
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
16
相关型号:
FH33J-16S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-16S-0.5SH(99)
Card Edge Connector, 16 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33J-18S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-18S-0.5SH(10)
Card Edge Connector, 18 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, HALOGEN FREE
HRS
FH33J-18S-0.5SH(99)
Card Edge Connector, 18 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33J-19S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-19S-0.5SH(10)
Card Edge Connector, 19 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, HALOGEN FREE
HRS
FH33J-19S-0.5SH(99)
Card Edge Connector, 19 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH33J-40S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-4S-0.5SH
0.4mm,0.5mm,1mm Pitch, 1.2mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH33J-4S-0.5SH(10)
Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking, HALOGEN FREE
HRS
FH33J-4S-0.5SH(99)
Card Edge Connector, 4 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
©2020 ICPDF网 联系我们和版权申明