FH34SRJ-8S-0.5SH [HRS]
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors;型号: | FH34SRJ-8S-0.5SH |
厂家: | HRS |
描述: | 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors |
文件: | 总12页 (文件大小:300K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip
actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
FH34(S)Series
Increased FPC/FFC holding force
Space saving (30 pos. shown)
Actuator
Metal fittings
1.0mm
3.2mm
Easy FPC/FFC insertion
Back opening rotating
All four
sides are
chamfered.
Top contacts
ꢀFeatures
1. Low-profile
With the 1.0 mm above the board and width of 3.8 mm the
connectors are used in space saving applications.
Ready to insert FPC/FFC
Delivered with
the actuator open
2. Increased FPC/FFC retention
As compared with existing similar construction connectors:
* In horizontal direction: Approximately 2.6 times
* In vertical direction: Approximately 2 times
3. Unique Back-Flip rotating actuator
The rotating actuator opens from the back of the connector,
assuring reliable electrical and mechanical connection.
4. Easy FPC insertion and reliable electrical connection
Proven Flip Lock actuator allows easy insertion of FPC and
provides a tactile sensation when fully closed, confirming
complete electrical and mechanical connection.
FPC
5. Delivered with the actuator open
FPC/FFC inserted and retained.
Completed electrical and mechanical connection.
FPC/FPC can be immediately inserted without the need for the
opening of the actuator.
6. Accepts standard FPC thickness
0.3mm thick standard Flexible Printed Circuit (FPC) can be used.
This is the only ultra-low profile ZIF connector using standard
FPC.
7. Compatible with existing connectors.
FPC/FFC and PCB mounting patterns are the same as for the
FH19SC Series (bottom contact), allowing the use of both
connectors for interconnections between two boards or replacement
of the connectors.
8. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
9. Board placement with automatic equipment
Flat upper surface and tape and reel packaging facilitate vacuum
pick-up and placement.
Compatible with existing connectors.(FH19SC SERIES)
Standard reel packaging contains 5000 connectors.
10.Halogen-free*
(FH34SJ,FH34SW,FH34SRJ)
*As defined by IEC61249-2-21
Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum
2012.3
1
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀSpecifications
Operating temperature range:
-55 to +85°C (Note 1)
Operating humidity range:
Storage temperature range:
-10 to +50°C (Note 2)
Storage humidity range:
Current rating 0.5 A (Note 1)
Ratings
Voltage rating 50 Vrms AC
Relative humidity 90% max. (No condensation)
Relative humidity 90% max. (No condensation)
Recommended FPC/FFC Thickness: 0.3 0.03 mm, ꢀold plated contact pads
Item
Specification
Conditions
1. Insulation resistance 500 Mø min.
100 V DC
2. Withstanding voltage
No flashover or insulation breakdown
250 Vrms AC / one minute
100 mø max.
* Including FPC and FFC conductor resistance
3. Contact resistance
1 mA, AC / DC 20mV max (AC: 1kHz)
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
No electrical discontinuity of 1µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
4. Durability
5. Vibration
20 cycles
Frequency: 10 to 55 Hz, single amplitude of 0.75
mm, 10 cycles in each of the 3 axis
No electrical discontinuity of 1µs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration of 981m/s2, 6 ms duration, sine half-
wave, 3 cycles in each of the 3 axis
6. Shock
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
7. Humidity (Steady state)
96 hours at 40°C and humidity of 90 to 95%
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Temperature : -55°C / +15°C to +35°C/+85°C / +15°C to +35°C
8. Temperature cycle
Time:
30
/
2 to 3
/
30
/ 2 to 3 minutes
5 cycles
Reflow: At the recommended temperature profile
Manual soldering: 350°C 5°C for 5 seconds (Note 3)
9. Resistance to soldering heat
No deformation of components affecting performance
Note1: When passing the current through all of the contacts, use 70% of the rated current.
Note2: Includes temperature rise caused by current flow.
Note3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or
during transportation after board mounting.
Note4: Information contained in this catalog represents general requirements for this Series.
Contact us for the drawings and specifications for a specific part number shown.
ꢀMaterials
Part
Material
LCP
Finish
Remarks
UL94V-0
FH34S series
FH34SJ series
FH34SW series
FH34SR series
FH34SRJ series
FH34S series
FH34SJ series
FH34SR series
FH34SRJ series
FH34SW series
FH34SJ series
FH34SR series
Color:Beige
Color:ꢀray
Insulator
Color:Black
PA
Color:Light brown
Color:Black
UL94HB
UL94V-0
LCP(8pos.)
Contacts
Metalfittings
Phosphor bronze
Phosphor bronze
ꢀold plating with nickel barrier
Pure tin reflow plating
-------
-------
ꢀOrdering information
( )
FH 34S J - 30S - 0.5 SH 50
1
2
3
4
5
6
7
1
2
4
Series name : FH
Series No. : 34S
Number of positions : 4 to 34
Contact pitch : 0.5mm
Termination type
SH : SMT horizontal mounting type
Plating specifications
(50)…ꢀold plating with nickel barrier
5
6
3 Blank : Standard
J
:
Top contact, Halogen-free
(Flame retardance UL94V-0).
7
W
: Top contact, Halogen-free
(Flame retardance UL94HB).
R
RJ
: Bottom contact
: Bottom contact, halogen-free
(Flame retardance UL94V-0).
2
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀConnector Dimensions
A
0.15
B
H
∞Number of contacts
0.5
(0.15)
0.15 H
Number of contacts indicator
(3.8)
2.9
HRS mark
Cav No.
A * *
0.5
0.3
(0.15)
2.9
(C)
D
0.1
1
0.1
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1 mm Max.
Note 2 : Packaged on tape and reel only. Check packaging specification.
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.
All dimensions: mm
A
4
Part Number
CL No.
Number of Contacts
B
C
2.53
D
3.38
FH34S-4S-0.5SH(50)
FH34S-6S-0.5SH(50)
FH34S-7S-0.5SH(50)
FH34S-8S-0.5SH(50)
FH34S-11S-0.5SH(50)
FH34S-14S-0.5SH(50)
FH34S-16S-0.5SH(50)
FH34S-20S-0.5SH(50)
FH34S-22S-0.5SH(50)
FH34S-23S-0.5SH(50)
FH34S-24S-0.5SH(50)
FH34S-26S-0.5SH(50)
FH34S-30S-0.5SH(50)
FH34S-32S-0.5SH(50)
FH34S-34S-0.5SH(50)
FH34SJ-4S-0.5SH(50)
FH34SJ-6S-0.5SH(50)
FH34SJ-8S-0.5SH(50)
FH34SJ-30S-0.5SH(50)
FH34SW-4S-0.5SH(50)
FH34SW-12S-0.5SH(50)
FH34SR-22S-0.5SH(50)
FH34SRJ-4S-0.5SH(50)
FH34SRJ-6S-0.5SH(50)
FH34SRJ-8S-0.5SH(50)
580-1203-2-50
580-1205-8-50
580-1224-2-50
580-1204-5-50
580-1213-6-50
580-1206-0-50
580-1211-0-50
580-1217-7-50
580-1216-4-50
580-1228-3-50
580-1210-8-50
580-1212-3-50
580-1201-7-50
580-1208-6-50
580-1207-3-50
580-1237-4-50
580-1234-6-50
580-1235-9-50
580-1239-0-50
580-1225-5-50
580-1233-3-50
580-1240-9-50
580-1238-7-50
580-1236-1-50
580-1231-8-50
4
6
1.5
2.5
3
5
3.53
4.38
7
5.5
6
4.03
4.88
8
3.5
5
4.53
5.38
11
14
16
20
22
23
24
26
30
32
34
4
7.5
9
6.03
6.88
6.5
7.5
9.5
7.53
8.38
10
12
13
13.5
14
15
17
18
19
4
8.57
9.38
10.57
11.57
12.07
12.57
13.57
15.57
16.53
17.53
2.53
11.38
12.38
12.88
13.38
14.38
16.38
17.38
18.38
3.38
10.5
11
11.5
12.5
14.5
15.5
16.5
1.5
6
5
2.5
3.53
4.38
8
6
3.5
4.53
5.38
30
4
17
4
14.5
1.5
15.57
2.53
16.38
3.38
12
22
4
8
5.5
6.53
7.38
13
4
10.5
1.5
11.57
2.53
12.38
3.38
6
5
2.5
3.53
4.38
8
6
3.5
4.53
5.38
Tape and reel packaging (5,000 pieces/reel).
Order by number of reels.
3
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended PCB mounting pattern and metal mask dimensions
Recommended metal mask thickness: t=0.1
B
J
∞Number of contacts
0.5
0.3 0.05
0.1 J
0.25 0.03
(Metal mask)
(0.065)
(0.185)
E
F
0.1
0.1
(A)
ꢀRecommended FPC/FFC Dimensions
ꢀ
0.05
0.5 0.07
B
0.03
0.5 0.03
0.3 0.03
0.3 0.03
Note 1 : Stiffener dimension should be 2.5mm min., and H dimension should be 0.5mm for improved flexibility of FPC.
Note 2 : When using the FPC/FFC in FH34S or FH19SC connectors, the exposed area inserted in either connector is 2.5mm
0.3mm and the stiffener is 3.5mm min.
All dimensions: mm
Part Number
CL No.
Number of Contacts
A
4
B
E
F
ꢀ
FH34S-4S-0.5SH(50)
FH34S-6S-0.5SH(50)
FH34S-7S-0.5SH(50)
FH34S-8S-0.5SH(50)
FH34S-11S-0.5SH(50)
FH34S-14S-0.5SH(50)
FH34S-16S-0.5SH(50)
FH34S-20S-0.5SH(50)
FH34S-22S-0.5SH(50)
FH34S-23S-0.5SH(50)
FH34S-24S-0.5SH(50)
FH34S-26S-0.5SH(50)
FH34S-30S-0.5SH(50)
FH34S-32S-0.5SH(50)
FH34S-34S-0.5SH(50)
FH34SJ-4S-0.5SH(50)
FH34SJ-6S-0.5SH(50)
FH34SJ-8S-0.5SH(50)
FH34SJ-30S-0.5SH(50)
FH34SW-4S-0.5SH(50)
FH34SW-12S-0.5SH(50)
FH34SR-22S-0.5SH(50)
FH34SRJ-4S-0.5SH(50)
FH34SRJ-6S-0.5SH(50)
FH34SRJ-8S-0.5SH(50)
580-1203-2-50
580-1205-8-50
580-1224-2-50
580-1204-5-50
580-1213-6-50
580-1206-0-50
580-1211-0-50
580-1217-7-50
580-1216-4-50
580-1228-3-50
580-1210-8-50
580-1212-3-50
580-1201-7-50
580-1208-6-50
580-1207-3-50
580-1237-4-50
580-1234-6-50
580-1235-9-50
580-1239-0-50
580-1225-5-50
580-1233-3-50
580-1240-9-50
580-1238-7-50
580-1236-1-50
580-1231-8-50
4
6
7
8
1.5
2.5
3
3.1
3.9
2.5
3.5
4
5
4.1
4.9
5.5
6
7.5
9
10
12
13
13.5
14
15
17
18
19
4
5
6
17
4
8
13
4
5
6
4.6
5.4
3.5
5
6.5
7.5
9.5
10.5
11
11.5
12.5
14.5
15.5
16.5
1.5
2.5
3.5
14.5
1.5
5.5
10.5
1.5
2.5
3.5
5.1
5.9
4.5
6
7.5
8.5
10.5
11.5
12
12.5
13.5
15.5
16.5
17.5
2.5
3.5
4.5
15.5
2.5
6.5
11.5
2.5
3.5
4.5
11
14
16
20
22
23
24
26
30
32
34
4
6
8
30
4
12
22
4
6
8
6.6
7.4
8.1
8.9
9.1
9.9
11.1
12.1
12.6
13.1
14.1
16.1
17.1
18.1
3.1
11.9
12.9
13.4
13.9
14.9
16.9
17.9
18.9
3.9
4.1
5.1
16.1
3.1
7.1
12.1
3.1
4.1
5.1
4.9
5.9
16.9
3.9
7.9
12.9
3.9
4.9
5.9
4
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀRecommended FPC construction
ꢀ Contact FPC manufacturer for specific details.
FPC : Flexible Printed Circuit
1. Using Single-sided FPC
Material Thickness
(µm)
Material Name
Covering film layer
Material
1 mil thick
Polyimide
(25)
(25)
Cover adhesive
0.2µm thick gold plated over 1
to 5µm thick nickel underplating
Surface treatment
3
Copper foil
Base adhesive
Base film
Cu
Thermosetting adhesive
Polyimide 1 mil thick
1oz
35
25
25
Reinforcement material adhesive Thermosetting adhesive
35
Stiffener
Polyimide
Total
7 mil thick
175
298
FPC : Flexible Printed Circuit
2. Using Double-sided FPC
Material Thickness
(µm)
Material Name
Covering layer film
Material
(25)
(25)
Polyimide
1 mil thick
Cover adhesive
0.2µm thick gold plated over 1
to 5µm thick nickel underplating
Surface treatment
3
Through-hole copper
Copper foil
Cu
15
18
Cu
1/2oz
Base adhesive
Base film
Thermosetting adhesive
18
Polyimide
Cu
1 mil thick
1/2oz
25
Base adhesive
Copper foil
18
(18)
25
Cover adhesive
Covering film layer
Reinforcement material adhesive
Stiffener
Thermosetting adhesive
Polyimide 1 mil thick
Thermosetting adhesive
25
50
100
Polyimide
Total
4 mil thick
297
*
To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT RECOMMENDED.
FFC : Flexible Flat Cable
3. Using FFC
Material Thickness
(µm)
Material Name
Polyester film
Material
(12)
(30)
35
Adhesive
Thermoplastic polyester
Polyester
ꢀold plated annealed copper foil
Adhesive
Polyester
Adhesive
Stiffener
30
12
Polyester
Polyester
Total
30
188
295
4. Precautions
1. This specification is a recommendation for the construction of the FH34S Series FPC and FFC (t=0.3 0.03).
2. For details about the construction, please contact the FPC/FFC manufacturers.
5
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀPackaging Specification
ꢀ Embossed Carrier Tape Dimensions
ꢀ Embossed Carrier Tape Dimensions
(Tape width 24mm max.)
(Tape width of 32mm min.)
(2.25)
(0.3)
4
0.1
2
0.15
8 0.1
(2.25)
(0.3)
Flat surface,
1.5+0.1
(3.2)
(4)
for placement with
automatic equipment
0
(1.95)
(1.95)
Unreeling direction
Flat surface, for placement
with automatic equipment
Unreeling direction
ꢀ Reel Dimensions
(Q: INSIDE)
(R: OUTSIDE)
End section
Mounting section
Lead section (400mm min.)
Embossed carrier tape
No connector inserted
Top cover tape
No connector inserted
(10 pockets min.)
(10 pockets min.)
6
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
All dimensions: mm
Part Number
CL No.
Number of Contacts
L
M
N
—
P
Q
R
FH34S-4S-0.5SH(50)
FH34S-6S-0.5SH(50)
FH34S-7S-0.5SH(50)
FH34S-8S-0.5SH(50)
FH34S-11S-0.5SH(50)
FH34S-14S-0.5SH(50)
FH34S-16S-0.5SH(50)
FH34S-20S-0.5SH(50)
FH34S-22S-0.5SH(50)
FH34S-23S-0.5SH(50)
FH34S-24S-0.5SH(50)
FH34S-26S-0.5SH(50)
FH34S-30S-0.5SH(50)
FH34S-32S-0.5SH(50)
FH34S-34S-0.5SH(50)
FH34SJ-4S-0.5SH(50)
FH34SJ-6S-0.5SH(50)
FH34SJ-8S-0.5SH(50)
FH34SJ-30S-0.5SH(50)
FH34SW-4S-0.5SH(50)
FH34SW-12S-0.5SH(50)
FH34SR-22S-0.5SH(50)
FH34SRJ-4S-0.5SH(50)
FH34SRJ-6S-0.5SH(50)
FH34SRJ-8S-0.5SH(50)
CL580-1203-2-50
CL580-1205-8-50
CL580-1224-2-50
CL580-1204-5-50
CL580-1213-6-50
CL580-1206-0-50
CL580-1211-0-50
CL580-1217-7-50
CL580-1216-4-50
CL580-1228-3-50
CL580-1210-8-50
CL580-1212-3-50
CL580-1201-7-50
CL580-1208-6-50
CL580-1207-3-50
CL580-1237-4-50
CL580-1234-6-50
CL580-1235-9-50
CL580-1239-0-50
CL580-1225-5-50
CL580-1233-3-50
CL580-1240-9-50
CL580-1238-7-50
CL580-1236-1-50
CL580-1231-8-50
4
6
16
16
16
16
16
24
24
24
24
24
24
24
32
32
32
16
16
16
32
16
24
24
16
16
16
7.5
7.5
4.3
5.3
17.4
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
33.4
33.4
17.4
17.4
17.4
33.4
17.4
25.4
25.4
17.4
17.4
17.4
21.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
37.4
37.4
21.4
21.4
21.4
37.4
21.4
29.4
29.4
21.4
21.4
21.4
—
—
7
7.5
5.8
—
8
7.5
6.3
—
11
14
16
20
22
23
24
26
30
32
34
4
7.5
7.8
—
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
14.2
14.2
7.5
9.3
—
10.3
12.3
13.3
13.8
14.3
15.3
17.3
18.3
19.3
4.3
—
—
—
—
—
28.4
28.4
28.4
—
—
6
7.5
5.3
—
8
7.5
6.3
28.4
—
30
4
14.2
7.5
17.3
4.3
—
12
22
4
11.5
11.5
7.5
8.3
—
13.3
4.3
—
—
6
7.5
5.3
—
8
7.5
6.3
Tape and reel packaging (5,000 pieces/reel).
7
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀTemperature Profile
HRS test condition
Solder method
Environment
MAX 250ç
: Reflow, IR/hot air
: Room air
250
200
150
100
50
230ç
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s Part Number:
M705-221CM5-42-10.5)
200ç
Test board
: ꢀlass epoxy 25mm∞40mm∞0.8mm thick
: 0.3mm∞0.8mm
Land dimensions
Metal mask
150ç
: 0.25∞0.65∞0.1mm thick
The temperature profiles shown are based on the above conditions.
In individual applications the actual temperature may vary, depending
on solder paste type, volume / thickness and board size / thickness.
Consult your solder paste and equipment manufacturer for specific
recommendations.
25ç
(60 sec.)
(60 sec.)
Soldering
90 to 120 sec.
Preheating
0
Start
Time (Seconds)
8
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀOperation and Precautions
Exercise care when handling connectors. Follow recommendations given below.
Operation
Precautions
1. As delivered
Delivered with the actuator
open. There is no need to
operate the actuator prior to
inserting the FPC/FFC.
• Do not close the actuator without the FPC/FPC inserted.
2. FPC/FFC insertion (The top contact specification)
• The contacts are making connection with the FPC/FFC
pads from the top.
Do not insert the FPC/FFC with the pads facing down.
When inserting the FPC/FFC do not twist it. Insert
straight. Improper insertion may cause deformation of the
contacts and connection failures.
Insert the FPC/FFC with the
conductive surfaces facing
up.
Align the FPC/FFC straight
with the connector and insert
FPC/FFC contact
surfaces face up.
it firmly all the way.
• Be sure to insert the FPC/FFC when the actuator is fully
open.
3. Locking
• Do not operate the actuator by only one end. Open or
close by pushing at the center.
• Do not try to rotate the actuator past the fully open 90°
position. This will damage the connector, preventing it
from use.
After FPC/FFC insertion, rotate the actuator down to a
full stop, pushing it at the center.
• Do not apply excessive force to the connector when the
actuator is closed.
Push at the center of the actuator.
Rotate
4. FPC/FFC removal (Lock release)
• Do not operate the actuator from one end only.
• The actuator opens only 90°. Do not attempt to open it
past this angle or grasp it.
Carefully rotate the actuator up to 90°, lifting it at the
center.
• During the opening of the actuator do not press it toward
the connector body. Rotate up at the center.
Raise
Lift at the center
9
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
ꢀPrecautions at the Design Stage
(1) Route the FPC/FFC so that a direct pull force
(2) Make sure that there is enough space to insert/remove the FPC/FFC straight.
(3) Follow the recommendations given in this catalog in regard to mounting pattern, metal mask dimensions and FPC/FFC mating
dimensions.
(4) Consult the manufacturer of the FPC/FFC for the details on the flexibility of the specific FPC/FFC.
(5) When designing the board lay-out and spaces in the device assure that there is enough clearances for the actuator to fully
open/close.
ꢀPrecautions when mounting connectors on the PCB
ꢀHandling before mounting on PCB
Insertion of the FPC/FFC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
ꢀPC board warpage
Minimize the warpage as much as possible. The connector are straight within 0.1 mm max. Make sure that the mounting area
flatness can accept the connector terminals without causing any failure of the solder joints.
ꢀForces on the board
ꢀWhen braking the large PC board into individual boards exercise care NOT to damage the installed connectors.
ꢀWhen attaching the boards or other components with the screws make sure that any stresses will NOT cause board deflections
affecting the mounting areas of the connector.
Connectors
PCB
ꢀWhen hand soldering:
· Do not perform hand soldering with the FPC inserted in the connector.
* Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
* Do not use excessive amount of solder or flux compounds.
Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.
10
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
:
NOTES
11
( )
FH34 S Seriesꢀ0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, 37677 Professional Center Drive, Suite #100C
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
CA 95014
Livonia, MI 48154
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
THE NETHERLANDS:
GERMANY:
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : +44-1908-369060
Fax : +44-1908-369078
http://www.hirose.co.uk
http://www.hiroseeurope.com
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC (SHANGHAI) CO., LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
1601,Henderson Metropolitan,NO.300 ,East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
Road,Huangpu District, Shanghai,China 200001
Phone : +86-21-6391-3355
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : +86-10-5165-9332
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-21-6391-3335
Fax : +86-10-5908-1381
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
HONG KONG:
KOREA:
TAIWAN:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
SINGAPORE:
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
10 Anson Road #26-16 International Plaza 079903 Unit No.03, Ground Floor, Explorer Building International Tech
Phone : +65-6324-6113
65-6324-6123
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +65-6324-6113
Fax : +65-6324-6123
Fax : +
http://www.hirose-singapore.com.sg
http://www.hirose-singapore.com.sg
®
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
+
+
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 03/2012. Contents are subject to change without notice for the purpose of improvements.
12
相关型号:
FH34SRJ-8S-0.5SH(50)
Card Edge Connector, 8 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH34SRJ-8S-0.5SH(99)
Card Edge Connector, 8 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking
HRS
FH34SRJ-8S-0.5SH50
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH34SRJ-9S-0.5SH
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH34SW-12S-0.5SH
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH34SW-12S-0.5SH(50)
Card Edge Connector, 12 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH34SW-12S-0.5SH50
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH34SW-4S-0.5SH
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
FH34SW-4S-0.5SH(50)
Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS
FH34SW-4S-0.5SH50
0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS
©2020 ICPDF网 联系我们和版权申明