首页 |元器件品牌

FH34SRJ-8S-0.5SH(99) [HRS]

Card Edge Connector, 8 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking;
FH34SRJ-8S-0.5SH(99)
型号： FH34SRJ-8S-0.5SH(99)
厂家： HRS    HRS
描述：

Card Edge Connector, 8 Contact(s), 1 Row(s), Right Angle, 0.02 inch Pitch, Surface Mount Terminal, Locking

PC 连接器
文件： 总12页 (文件大小：533K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip  
Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
FH34SRJ Series  
●3.8mm Depth  
Height : 1.0mm  
Fig.1  
■Features  
●Top/Bottom Contact  
1. Low-profile  
With the 1.0mm above the board and width of 3.8mm  
the connectors are used in space saving applications.  
2. Increased FPC/FFC retention  
As compared with existing similar construction  
connectors :  
* In horizontal direction : Approximately 2.6 times higher  
* In vertical direction : Approximately 2 times higher  
3. Unique Back-Flip rotating actuator  
Top & Bottom contact improves the design flexibility  
The rotating actuator opens from the back of the  
connector, assuring reliable electrical and mechanical  
connection.  
Fig.2  
4. Easy FPC insertion and reliable electrical  
connection  
●FH34SRJ Differential Impedance  
Proven Flip Lock actuator allows easy insertion of  
FPC and provides a tactile sensation when fully  
closed, confirming complete electrical and mechanical  
connection.  
ꢀ130ps rise time（20-80％）  
120  
115  
110  
105  
100  
95  
5. Delivered with the actuator open  
FPC/FPC can be immediately inserted without the  
need for the opening of the actuator.  
6. Accepts standard FPC thickness  
0.3mm thick standard Flexible Printed Circuit (FPC)  
can be used. This is the only ultra-low profile ZIF  
connector using standard FPC.  
7. Conductive traces on the PCB can  
run under the connector  
90  
connector  
FPC  
No exposed contacts on the bottom of the connector.  
85  
S11  
Spec  
*
8.Halogen-free  
80  
0
*As defined by IEC61249-2-21  
0.5  
1
1.5  
2
2.5  
Time(ns)  
Fig.3  
Br-900ppm maximum, Cl-900ppm maximum,  
Cl + Br combined-1,500ppm maximum  
9. Board placement with automatic  
equipment  
●Smooth FPC / FFC insertion  
Flat upper surface and tape and reel packaging  
facilitate vacuum pick-up and placement.  
Standard reel packaging contains 5000 connectors.  
Tapers on all 4 inner walls  
Fig.4  
In cases where the application will demand a high level of reliability, such as automotive,  
please contact a company representative for further information.  
1
2017.5  
③
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Product Specifications  
Operating temperature range :  
-55 to +85°C (Note 2)  
Operating humidity range :  
Storage temperature range :  
-10 to +50°C (Note 3)  
Storage humidity range :  
Current rating 0.5A (Note 1)  
Voltage rating 50Vrms AC  
Ratings  
Relative humidity 90% max. (No condensation) Relative humidity 90% max. (No condensation)  
Recommended FPC/FFC  
Thickness : 0.3 0.03 mm, ꢀold plated contact pads  
Specification  
Item  
Conditions  
1. Insulation resistance 500Mø min.  
100V DC  
2. Withstanding voltage No flashover or insulation breakdown  
250Vrms AC / 1 minute  
100mø max.  
3. Contact resistance  
1mA, AC / DC 20mV max (AC : 1kHz)  
*
Including FPC and FFC conductor resistance  
Contact resistance : 100mø max.  
No damage, cracks, or parts dislocation  
4. Durability  
5. Vibration  
20cycles  
No electrical discontinuity of 1µs or longer  
Contact resistance : 100mø max.  
No damage, cracks, or parts dislocation  
Frequency : 10 to 55 Hz, single amplitude of 0.75  
mm, 10 cycles in each of the 3 axis  
No electrical discontinuity of 1µs or longer  
Contact resistance : 100mø max.  
No damage, cracks, or parts dislocation  
2
Acceleration of 981m/s , 6 ms duration, sine half-  
6. Shock  
wave, 3 cycles in each of the 3 axis  
Contact resistance : 100mø max.  
7. Humidity (Steady state) Insulation resistance : 50Mø min.  
No damage, cracks, or parts dislocation  
96 hours at 40°C and humidity of 90 to 95%  
Contact resistance : 100mø max.  
8. Temperature cycle Insulation resistance : 50Mø min.  
No damage, cracks, or parts dislocation  
Temperature : -55°C / +15°C to +35°C / +85°C / +15°C to +35°C  
Time:  
30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles  
Reflow : At the recommended temperature profile  
Manual soldering: 350°C 10°C for 5 seconds (Note 3)  
9. Resistance to soldering heat No deformation of components affecting performance  
Note1 : When passing the current through all of the contacts, use 70% of the rated current.  
Note2 : Includes temperature rise caused by current flow.  
Note3 : The term "storage" refers to products stored for a long period prior to mounting and use.  
The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage,  
shipment or during transportation after board mounting.  
■Materials / Finish  
Part  
Material  
LCP  
Finish  
Remarks  
Color : ꢀray  
Insulator  
PA  
UL94V-0  
Color : Black  
LCP(8pos.)  
Phosphor bronze  
Phosphor bronze  
Contacts  
ꢀold plating with nickel barrier  
Pure tin reflow plating  
̶̶̶  
̶̶̶  
Metalfittings  
Product Number Structure  
■
Refer to the chart below when determining the product specifications from the product number.  
Please select from the product numbers listed in this catalog when placing orders.  
( )  
FH 34S RJ − 30S − 0.5 SH 50  
❶
❷
❸
❹
❺
❻
❼
❶ Series name  
❷ Series No.  
: FH  
: 34S  
❺ Contact pitch : 0.5mm  
❻ Termination type  
SH : SMT horizontal mounting type  
❸ RJ：Top and Bottom contact, halogen-free  
❼ Specifications  
(Flame retardance UL94V-0).  
(50)…Standard product 5,000 pcs/reel  
(99)…500 pcs/reel  
❹ Number of Contacts : 4 to 50  
2
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
■Connector Dimensions  
×Number of contacts  
Contact No.1  
Lot No.  
Number of contacts indicator  
Cav No.  
HRS mark  
Polarization Mark  
(0.5)  
(2.9)  
(3.8)  
Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max.  
Note 2 : Packaged on tape and reel only. Check packaging specification.  
Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.  
Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue.  
Unit : mm  
D
Part No.  
HRS No.  
No. of Contacts  
A
4
B
1.5  
2
C
4
2.53  
3.38  
FH34SRJ-4S-0.5SH(50)  
FH34SRJ-5S-0.5SH(50)  
FH34SRJ-6S-0.5SH(50)  
FH34SRJ-7S-0.5SH(50)  
FH34SRJ-8S-0.5SH(50)  
FH34SRJ-9S-0.5SH(50)  
FH34SRJ-10S-0.5SH(50)  
FH34SRJ-11S-0.5SH(50)  
FH34SRJ-12S-0.5SH(50)  
FH34SRJ-14S-0.5SH(50)  
FH34SRJ-16S-0.5SH(50)  
FH34SRJ-18S-0.5SH(50)  
FH34SRJ-20S-0.5SH(50)  
FH34SRJ-22S-0.5SH(50)  
FH34SRJ-24S-0.5SH(50)  
FH34SRJ-26S-0.5SH(50)  
FH34SRJ-30S-0.5SH(50)  
FH34SRJ-34S-0.5SH(50)  
FH34SRJ-40S-0.5SH(50)  
FH34SRJ-45S-0.5SH(50)  
580-1238-7 50  
580-1264-7 50  
580-1236-1 50  
580-1200-0 50  
580-1231-8 50  
580-1262-1 50  
580-1251-5 50  
580-1258-4 50  
580-1253-0 50  
580-1252-8 50  
580-1259-7 50  
580-1248-0 50  
580-1256-9 50  
580-1254-3 50  
580-1255-6 50  
580-1247-8 50  
580-1232-0 50  
580-1261-9 50  
580-1260-6 50  
580-1265-0 50  
580-1266-2 50  
5
4.5  
5
3.03  
3.88  
6
2.5  
3
3.53  
4.38  
7
5.5  
6
4.03  
4.88  
8
3.5  
4
4.53  
5.38  
9
6.5  
7
5.03  
5.88  
10  
11  
12  
14  
16  
18  
20  
22  
24  
26  
30  
34  
40  
45  
50  
4.5  
5
5.53  
6.38  
7.5  
8
6.03  
6.88  
5.5  
6.5  
7.5  
8.5  
9.5  
10.5  
11.5  
12.5  
14.5  
16.5  
19.5  
22  
6.53  
7.38  
9
7.53  
8.38  
10  
11  
12  
13  
14  
15  
17  
19  
22  
24.5  
27  
8.57  
9.38  
9.57  
10.38  
11.38  
12.38  
13.38  
14.38  
16.38  
18.38  
21.38  
23.88  
26.38  
10.57  
11.57  
12.57  
13.57  
15.57  
17.53  
20.53  
23.03  
25.53  
24.5  
FH34SRJ-50S-0.5SH(50)  
Tape and reel packaging.  
Order by number of reels.  
3
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Recommended PCB mounting pattern and metal mask dimensionsꢀ  
Recommended PCB Mounting Pattern  
Recommended Stencil Pattern  
(Recommended Stencil  
Thickness : t=0.1mm)  
B
B
X
nX  
0.1X  
Y
nX  
0.03 Y  
0.ꢀ  
0.5  
0.3 0.0ꢀ  
0.25 0.03  
Contact No.1  
PCB mounting  
pattern image  
E
F
0.03  
0.03  
0.06ꢀ  
Connector image : underside  
（0.18ꢀ）  
E
F
0.1  
0.1  
□Recommended FPC/FFC Dimensions  
G
0.05  
B
Z
0.5 0.0ꢀ  
0.5  
0.5 0.0ꢀ  
0.3 0.03  
nX  
0.03Z  
0.3 0.03  
Contact No.1(Top contact)  
Contact No.1(Bottom contact)  
Note 1 : Dimension P shall be 0.5mm min.  
Note 2 : The recommended FPC pattern above has been designed only for FH34SRJ series.  
When using the FPC for FH19SC series (lower contact), uncoverd area shall be 2.5 0.3mm and stiffener shall be  
3.5mm min.  
Unit : mm  
Part No.  
HRS No.  
No. of Contacts  
B
1.5  
2
E
F
G
2.5  
3
4
3.1  
3.9  
FH34SRJ-4S-0.5SH(50)  
FH34SRJ-5S-0.5SH(50)  
FH34SRJ-6S-0.5SH(50)  
FH34SRJ-7S-0.5SH(50)  
FH34SRJ-8S-0.5SH(50)  
FH34SRJ-9S-0.5SH(50)  
FH34SRJ-10S-0.5SH(50)  
FH34SRJ-11S-0.5SH(50)  
FH34SRJ-12S-0.5SH(50)  
FH34SRJ-14S-0.5SH(50)  
FH34SRJ-16S-0.5SH(50)  
FH34SRJ-18S-0.5SH(50)  
FH34SRJ-20S-0.5SH(50)  
FH34SRJ-22S-0.5SH(50)  
FH34SRJ-24S-0.5SH(50)  
FH34SRJ-26S-0.5SH(50)  
FH34SRJ-30S-0.5SH(50)  
FH34SRJ-34S-0.5SH(50)  
FH34SRJ-40S-0.5SH(50)  
FH34SRJ-45S-0.5SH(50)  
FH34SRJ-50S-0.5SH(50)  
580-1238-7 50  
580-1264-7 50  
580-1236-1 50  
580-1200-0 50  
5
3.6  
4.4  
6
2.5  
3
4.1  
4.9  
3.5  
4
7
4.6  
5.4  
8
3.5  
4
5.1  
5.9  
4.5  
5
580-1231-8 50  
580-1262-1 50  
580-1251-5 50  
580-1258-4 50  
580-1253-0 50  
580-1252-8 50  
580-1259-7 50  
580-1248-0 50  
580-1256-9 50  
580-1254-3 50  
580-1255-6 50  
580-1247-8 50  
580-1232-0 50  
580-1261-9 50  
580-1260-6 50  
580-1265-0 50  
580-1266-2 50  
9
5.6  
6.4  
10  
11  
12  
14  
16  
18  
20  
22  
24  
26  
30  
34  
40  
45  
50  
4.5  
5
6.1  
6.9  
5.5  
6
6.6  
7.4  
5.5  
6.5  
7.5  
8.5  
9.5  
10.5  
11.5  
12.5  
14.5  
16.5  
19.5  
22  
7.1  
7.9  
6.5  
7.5  
8.5  
9.5  
10.5  
11.5  
12.5  
13.5  
15.5  
17.5  
20.5  
23  
8.1  
8.9  
9.1  
9.9  
10.1  
11.1  
12.1  
13.1  
14.1  
16.1  
18.1  
21.1  
23.6  
26.1  
10.9  
11.9  
12.9  
13.9  
14.9  
16.9  
18.9  
21.9  
24.4  
26.9  
24.5  
25.5  
4
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□
Recommended FPC construction  
● Contact FPC manufacturer for specific details.  
1. Using Single-sided FPC  
FPC : Flexible Printed Circuit  
Material Thickness  
(µm)  
Material Name  
Material  
Covering film layer  
Cover adhesive  
Polyimide 1 mil thick  
（25）  
（25）  
0.2µm thick gold plated over 1  
to 5µm thick nickel underplating  
Surface treatment  
3
Copper foil  
Cu  
Thermosetting adhesive  
Polyimide 1 mil thick  
Thermosetting adhesive  
1oz  
35  
25  
Base adhesive  
Base film  
25  
Reinforcement material adhesive  
Stiffener  
35  
Polyimide  
Total  
7 mil thick  
175  
298  
2. Using Double-sided FPC  
FPC : Flexible Printed Circuit  
Material Thickness  
(µm)  
Material Name  
Material  
Covering layer film  
Cover adhesive  
Polyimide 1 mil thick  
(25)  
(25)  
0.2µm thick gold plated over 1  
to 5µm thick nickel underplating  
Surface treatment  
3
Cu  
15  
18  
Through-hole copper  
Copper foil  
Cu  
1/2oz  
Thermosetting adhesive  
18  
Base adhesive  
Base film  
Polyimide  
Cu  
1 mil thick  
25  
18  
Base adhesive  
Copper foil  
1/2oz  
(18)  
25  
Cover adhesive  
Covering film layer  
Thermosetting adhesive  
Polyimide 1 mil thick  
Thermosetting adhesive  
25  
50  
Reinforcement material adhesive  
Stiffener  
Polyimide  
Total  
4 mil thick  
100  
297  
* To prevent release of the FPC due to its bending, use of the double  
sided FPC with copper foil on the back side is not recommended.  
3. Using FFC  
FFC : Flexible Flat Cable  
Material Thickness  
(µm)  
Material Name  
Material  
Polyester film  
(12)  
(30)  
35  
Adhesive  
Thermoplastic polyester  
Polyester  
Gold plated annealed copper foil  
Adhesive  
30  
Polyester  
12  
Polyester  
Polyester  
Total  
Adhesive  
30  
Stiffener  
188  
295  
* tolerance of 20µm.  
1. This specification is a recommendation for the construction of the FH34SRJ Series FPC and FFC (t=0.3 0.03).  
2. For details about the construction, please contact the FPC/FFC manufacturers.  
5
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Packaging Specification  
● Embossed Carrier Tape Dimensions  
(Tape width 24mm max.)  
24mm MAX  
● Embossed Carrier Tape Dimensions  
(Tape width 32mm min.)  
32mm MIN  
（2）  
1ꢀ95  
（0ꢀ3）  
8 0ꢀ1  
8
0ꢀ1 （2）  
1ꢀ95  
（0ꢀ3）  
4
0ꢀ1  
4 0ꢀ1  
Direction of unreeling  
+0ꢀ1  
1ꢀ5  
0
Direction of unreeling  
● Reel Dimensions  
(L : Inside)  
（Ø13）  
Direction of unreeling  
(M : Outside)  
400mm MIN(Leader)  
Embossed carrier tape 100mm MIN  
(Empty)  
Top cover tape  
1600mm MIN  
(Trailer・Empty)  
Unit : mm  
M
Part No.  
HRS No.  
No. of Contacts  
H
J
K
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
L
4
FH34SRJ-4S-0.5SH(50)  
FH34SRJ-5S-0.5SH(50)  
FH34SRJ-6S-0.5SH(50)  
FH34SRJ-7S-0.5SH(50)  
FH34SRJ-8S-0.5SH(50)  
FH34SRJ-9S-0.5SH(50)  
FH34SRJ-10S-0.5SH(50)  
FH34SRJ-11S-0.5SH(50)  
FH34SRJ-12S-0.5SH(50)  
FH34SRJ-14S-0.5SH(50)  
FH34SRJ-16S-0.5SH(50)  
FH34SRJ-18S-0.5SH(50)  
FH34SRJ-20S-0.5SH(50)  
FH34SRJ-22S-0.5SH(50)  
FH34SRJ-24S-0.5SH(50)  
FH34SRJ-26S-0.5SH(50)  
FH34SRJ-30S-0.5SH(50)  
FH34SRJ-34S-0.5SH(50)  
FH34SRJ-40S-0.5SH(50)  
FH34SRJ-45S-0.5SH(50)  
FH34SRJ-50S-0.5SH(50)  
580-1238-7 50  
580-1264-7 50  
580-1236-1 50  
580-1200-0 50  
5
6
7
16  
7.5  
17.4  
21.4  
8
580-1231-8 50  
580-1262-1 50  
580-1251-5 50  
580-1258-4 50  
580-1253-0 50  
580-1252-8 50  
580-1259-7 50  
580-1248-0 50  
580-1256-9 50  
580-1254-3 50  
580-1255-6 50  
580-1247-8 50  
580-1232-0 50  
580-1261-9 50  
580-1260-6 50  
580-1265-0 50  
580-1266-2 50  
9
10  
11  
12  
14  
16  
18  
20  
22  
24  
26  
30  
34  
40  
45  
50  
24  
11.5  
25.4  
29.4  
32  
44  
14.2  
20.2  
28.4  
33.4  
45.4  
37.4  
49.4  
40.4  
6
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Temperature Profile  
HRS test condition  
Solder method  
Environment  
MAX 250ç  
: Reflow, IR/hot air  
: Room air  
250  
200  
150  
100  
50  
230ç  
Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu  
(Senju Metal Industry, Co., Ltd.'s Part  
Number:  
200ç  
M705-221CM5-42-10.5)  
Test board  
: Glass epoxy  
150ç  
18.3mm∞32.85mm∞0.8mm thick  
: 0.3mm∞0.8mm  
Land dimensions  
Metal mask  
: 0.25∞0.65∞0.1mm thick  
The temperature profiles shown are based on the above  
conditions.  
25ç  
(60 sec.)  
(60 sec.)  
Soldering  
90 to 120 sec.  
Preheating  
In individual applications the actual temperature may  
vary, depending on solder paste type, volume / thickness  
and board size / thickness. Consult your solder paste and  
equipment manufacturer for specific recommendations.  
0
Start  
Time (Seconds)  
7
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Operation and Precautions  
Exercise care when handling connectors. Follow recommendations given below.  
Operation  
Caution : Handle connectors carefully, as they are very small and thin.  
Please refer to this section for verification of the following points:  
1. As delivered  
The actuator packaged in the open condition.  
Delivered with the actuator open. There is no need to  
operate the actuator prior to inserting the FPC/FFC.  
❶
Precautions  
［
］
・Do not close the actuator without the FPC/FPC  
inserted.  
2. FPC/FFC insertion  
Be sure that the FPC is parallel to the surface of the PCB, then completely insert into the connector.  
❶
Caution  
［
］
Do not attempt to insert the FPC if actuator is closed.  
・
・
If the actuator is closed and if the FPC is twisted during insertion, it can cause contact deformation  
and / or contact failure.  
Actuator close  
Actuator open  
FPC  
FPC  
PCB  
PCB  
3. FPC/FFC insertion (The top contact specification)  
❶ Insert the FPC/FFC with the conductive surfaces facing up.  
Align the FPC/FFC straight with the connector and insert it firmly all the way.  
Boundary of FPC pattern  
Edge of housing opening  
Proper insertion  
Skewed insertion  
Shallow insertion  
8
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Operation and Precautions  
Operation  
4. Locking  
❶ After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center.  
Do not press  
down on the  
Rotate  
actuator or  
housing  
Do not rotate  
the actuator by  
the ends  
Lift at the center  
5. FPC/FFC removal (Lock release)  
❶ Carefully rotate the actuator up to 90°, lifting it at the center.  
Do not apply force to the actuator in the  
direction shown when it is fully open.  
Opening to an angle greater than 90°C  
will break or damage the connector.  
Flip actuator up to open  
Do not rotate  
the actuator by  
the ends  
Lift at the center  
* This connector uses a back flip type structure. The insert direction of the FPC and the actuator are different  
from front flip type connectors.  
Do not to try to open the actuator from the FPC side.  
9
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Operation and Precautions  
Operation  
6. FPC routing  
FPC should be routed in a manner that no strain or load is exerted onto the FPC. Placing any strain on the  
FPC may result in unintentional disconnect or damage to the FPC, which can lead to issues such as contact  
failure.  
❶
Caution  
［
］
Do not allow the FPC or stiffener to touch the casings, housings or any other items.  
・
When routing the FPC, make sure that no strain or load is applied to the connector in a pulling, pushing or  
・
side-to-side motion. Additionally, make sure that no excessive upward or downward force is applied to the  
connector.  
When routing the FPC, make sure that there is a stress free path for the FPC and the stiffener is parallel to  
・
the PCB. Observe correct bend radiuses.  
Do not place or mount any parts that will interfere with the FPC routing.  
・
PCB  
FPC  
Stiffener film  
PCB  
FPC  
PCB  
Component part  
Stiffener film  
10  
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
□Operation and Precautions  
Precautions when mounting connectors on the PCB  
SHandling before mounting on PCB  
ꢀInsertion of the FPC/FFC or operation of the actuator prior to mounting on the PCB is not recommended.  
SPC board warpage  
Minimize the warpage as much as possible. The connector are straight within 0.1 mm max. Make sure that  
the mounting area flatness can accept the connector terminals without causing any failure of the solder joints.  
SForces on the board  
SWhen braking the large PC board into individual boards exercise care not to damage the installed  
connectors.  
SWhen attaching the boards or other components with the screws make sure that any stresses will not cause  
board deflections affecting the mounting areas of the connector.  
Connectors  
PCB  
SWhen hand soldering:  
· Do not perform hand soldering with the FPC inserted in the connector.  
* Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.  
* Do not use excessive amount of solder or flux compounds.  
Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.  
11  
FH34SRJ Series■0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors  
USA:  
USA:  
USA:  
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)  
2300 Warrenville Road, Suite 150,  
Downers Grove, IL 60515  
Phone : +1-630-282-6700  
http://www.hirose.com/us/  
2841 Junction Ave, Suite 200  
San Jose, CA. 95134  
Phone : +1-408-253-9640  
Fax : +1-408-253-9641  
http://www.hirose.com/us/  
17197 N. Laurel Park Drive, Suite 253,  
Livonia, MI 48152  
Phone : +1-734-542-9963  
Fax : +1-734-542-9964  
http://www.hirose.com/us/  
USA:  
THE NETHERLANDS:  
GERMANY:  
HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE  
300 Brickstone Square Suite 201,  
Andover, MA 01810  
HIROSE ELECTRIC EUROPE B.V.  
Hogehillweg #8 1101 CC Amsterdam Z-O  
Phone : +31-20-6557460  
Fax : +31-20-6557469  
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH  
Schoenbergstr. 20, 73760 ostfildern  
Phone : +49-711-456002-1  
Fax : +49-711-456002-299  
http://www.hirose.com/eu/  
Phone : +1-978-662-5255  
http://www.hirose.com/eu/  
GERMANY:  
GERMANY:  
FRANCE:  
HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE  
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE  
Neumeyerstrasse 22-26, 90411 Nurnberg  
Phone : +49-911 32 68 89 63  
Fax : +49-911 32 68 89 69  
Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,  
Phone : +49-511 97 82 61 30  
Fax : +49-511 97 82 61 35  
http://www.hirose.com/eu/  
71 Boulevard National La Garenne Colombes, 92250, France  
Phone : +33 (0) 1 7082 3170  
Fax : +33 (1) 7082 3101  
http://www.hirose.com/eu/  
http://www.hirose.com/eu/  
UNITED KINGDOM:  
CHINA:  
CHINA:  
HIROSE ELECTRIC EUROPE BV (UK BRANCH)  
4 Newton Court, Kelvin Drive, Knowlhill,  
Milton Keynes, MK5 8NH  
HIROSE ELECTRIC (SHANGHAI) CO., LTD.  
18, Enterprise Center Tower 2, 209# Gong He A1001, Ocean International Center, Building 56# East 4th  
Road, Jing’an District, Shanghai, CHINA 200070 Ring Middle Road, ChaoYang District, Beijing, 100025  
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH  
Phone : +44-1908 202050  
Fax : +44-1908 202058  
http://www.hirose.com/eu/  
Phone : +86-21-6391-3355  
Fax : +86-21-6391-3335  
http://www.hirose.com/cn/  
Phone : +86-10-5165-9332  
Fax : +86-10-5908-1381  
http://www.hirose.com/cn/  
CHINA:  
HONG KONG:  
TAIWAN:  
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.  
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei  
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008  
Phone : +86-755-8207-0851  
Fax : +86-755-8207-0873  
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377  
Phone : +852-2803-5338  
Fax : +852-2591-6560  
Fax : +886-2-2555-7350  
http://www.hirose.com/tw/  
http://www.hirose.com/cn/  
http://www.hirose.com/hk/  
KOREA:  
SINGAPORE:  
INDIA:  
HIROSE KOREA CO.,LTD.  
HIROSE ELECTRIC SINGAPORE PTE. LTD.  
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE  
250, Huimanggongwon-ro, Siheung-si,  
Gyeonggi-do, Korea, 15083  
Phone : +82-31-496-7000 or 7124  
Fax : +82-31-496-7100  
10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C,  
079903, Singapore  
Phone : +65-6324-6113  
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India  
Phone : +91-12-660-8018  
65-6324-6123  
Fax : +  
Fax : +91-120-4804949  
http://www.hirose.com/sg/  
http://www.hirose.co.kr/  
http://www.hirose.com/sg/  
INDIA:  
MALAYSIA:  
THAILAND:  
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE PENANG REPRESENTATIVE OFFICE  
BANGKOK OFFICE (REPRESENTATIVE OFFICE)  
Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 1-21-01, Suntech @ Penang Cybercity (1164), Lintang Unit 4703, 47th FL., 1 Empire Tower, South Sathorn  
Gandhi (MG) Road, Bangalore 560 001, Karnataka, India  
Phone : +91-80-4120 1907  
Fax : +91-80-4120 9908  
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Road, Yannawa, Sathorn, Bangkok 10120 Thailand  
Phone : +604-619-2564  
Fax : +604-619-2574  
Phone : +66-2-686-1255  
Fax : +66-2-686-3433  
http://www.hirose.com/sg/  
http://www.hirose.com/sg/  
http://www.hirose.com/sg/  
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN  
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726  
http://www.hirose.com  
http://www.hirose-connectors.com  
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.  
The contents of this catalog are current as of date of 05/2017. Contents are subject to change without notice for the purpose of improvements.  
12  

相关型号：

FH34SRJ-8S-0.5SH50

 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS

FH34SRJ-9S-0.5SH

 0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS

FH34SRJ-9S-0.5SH(05)

 Headers and Edge Type Connector,
HRS

FH34SW-12S-0.5SH

 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS

FH34SW-12S-0.5SH(50)

 Card Edge Connector, 12 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS

FH34SW-12S-0.5SH50

 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS

FH34SW-4S-0.5SH

 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS

FH34SW-4S-0.5SH(50)

 Card Edge Connector, 4 Contact(s), 1 Row(s), Female, Right Angle, Surface Mount Terminal, HALOGEN FREE
HRS

FH34SW-4S-0.5SH50

 0.5 mm Pitch, 1.0 mm above the board Top and Bottom Contact, Back-Flip actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
HRS

FH35-13S-0.3SHW(50)

 Card Edge Connector, 13 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS

FH35-15S-0.3SHW(50)

 Card Edge Connector, 15 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS

FH35-17S-0.3SHW(50)

 Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明