FH35-15S-0.3SHW(50) [HRS]
Card Edge Connector, 15 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT;![FH35-15S-0.3SHW(50)](http://pdffile.icpdf.com/pdf2/p00250/img/icpdf/FH35-13S-0-3_1515531_icpdf.jpg)
型号: | FH35-15S-0.3SHW(50) |
厂家: | ![]() |
描述: | Card Edge Connector, 15 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT PC 连接器 |
文件: | 总11页 (文件大小:434K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS productNs hEaveWbeen discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.3 mm Pitch, 0.9 mm above the board, Top Contact, Back-Flip
actuator Flexible Printed Circuit ZIF Connectors
FH35 Series
●Small size (35 pos. shown)
0.9mm
■Features
●Easy FPC insertion
1. Low-profile
With the 0.9 mm above the board and width of 3.2 mm the
connectors are used in a space saving applications.
AAccttuuaattoorr
2. Unique Back-Flip rotating actuator
The rotating actuator opens from the back of the connector,
assuring reliable electrical and mechanical connection.
3. Delivered with the actuator open
FPC can be immediately inserted without the need for the
opening of the actuator.
4. Easy FPC insertion
FPC
Entry chamfers at all sides of the FPC insertion slot assure
correct insertion and positioning of the FPC.
5. Standard FPC thickness
Reliable connection with the use of ready available 0.2 mm
thick FPC.
●Completely locked
6. Conductive traces on the PCB can run under
the connector
No exposed contacts on the bottom of the connector.
7. Board placement with automatic equipment
Flat top surface and packaging on the tape-and-reel allows
use of vacuum nozzles.
Standard reel contains 5,000 pieces.
■Applications
Mobile phones, PDA’s, digital cameras, digital camcorders,
camera modules and other compact devices requiring
Flexible Printed Circuit connections using high reliability
extremely small profile connectors.
2008.3
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
■Specifications
Operating
temperature range
Storage
temperature range
Current rating
-55 to +85°C (Note 2)
-10 to +50°C (Note 3)
0.2 A (Note 1)
30 Vrms AC
Rating
Operating
humidity range
Relative humidity 90% Storage
max. (No condensation) humidity range
Relative humidity 90%
max. (No condensation)
Voltage rating
Recommended FPC
Item
Thickness: 0.2 0.03, gold plated contact pads
Specification
Conditions
1.Insulation resistance 50 Mø min
100 V DC
2.Withstanding voltage No flashover or insulation breakdown
90 Vrms AC / one minute
100 mø max.
* Including FPC conductor resistance
3.Contact resistance
1 mA AC
10 cycles
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
4.Durability
No electrical discontinuity of 1 μs or longer
Frequency: 10 to 55 Hz,
5.Vibration
6.Shock
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
single amplitude of 0.75 mm,
10 cycles in each of the 3 axial directions
No electrical discontinuity of 1 μs or longer
Contact resistance: 100 mø max.
No damage, cracks, or parts dislocation
Acceleration: 981 m/s2, 6 ms duration,
sine half-wave, 3 cycles in each of the 3 axis
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts looseness
7.Humidity
(Steady state)
96 hours at 40ç and humidity of 90 to 95%
Contact resistance: 100 mø max.
Insulation resistance: 50 Mø min.
No damage, cracks, or parts dislocation
Temperature:-55ç➝+15ç to +35ç➝+85ç➝+15ç to +35ç
Time: 30➝ 2 to 3 ➝ 30➝ 2 to 3 minutes
5 cycles
8.Temperature cycle
9.Resistance to
soldering heat
Reflow: At the recommended temperature profile
Manual soldering: 350 10°C for 5 seconds
No deformation of components affecting performance
Note 1: When passing the current through all of the contacts, use 70% of the rated current.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for a long period prior to mounting and use.
The operating temperature and humidity range covers the non-conducting condition of connectors after board mounting.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials
Part
Material
LCP
Finish
Color: Beige
Remarks
UL94V-0
Insulator
Actuator
PA
Color: Black
Contacts
Metal fittings
Phosphor bronze
Phosphor bronze
Gold plating
-----------------
-----------------
Pure tin reflow plating
■Ordering information
FH35 - 35S - 0.3 SHW (50)
1
2
3
4
5
1 Series name
: FH35
4 Contact type
2 Number of positions : 19, 25, 33, 35
(45, and 51 pos. are under development)
SHW : SMT horizontal staggered mounting
5 Plating specifications:
3 Contact pitch
: 0.3 mm
(50)
: Nickel barrier gold plating
5,000 pieces / reel
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
■Connector Dimensions
A
0.3 0.1
B
0.6 0.1
(0.12)
0.6 0.1
(0.12)
C
Polarizing mark indicator
Number of contacts indicator
B
(0.15)
(0.6)
(D: FPC insertion slot dimension)
E
(3)
(4.2)
(1.45)
B
(1.15)
(0.55)
0.33 0.1
0.15 0.15
0.4 0.1
0.05 0.15
3 0.15
0.1
0.1
Note 1 : The coplanarity of each terminal lead is within 0.1.
Note 2 : Slight variations in color of the plastic compounds do not affect form, fit or function.
Note 3 : Reserved for future product expansion. Contact HRS for details on availability.
All dimensions: mm
Part Number
CL No.
Note 3
Note 3
Note 3
Number of contacts
A
B
3
C
3.6
4.2
4.8
5.4
6
D
E
RoHS
FH35-13S-0.3SHW(50)
FH35-15S-0.3SHW(50)
FH35-17S-0.3SHW(50)
FH35-19S-0.3SHW(50)
FH35-21S-0.3SHW(50)
FH35-25S-0.3SHW(50)
FH35-27S-0.3SHW(50)
FH35-31S-0.3SHW(50)
FH35-33S-0.3SHW(50)
FH35-35S-0.3SHW(50)
FH35-39S-0.3SHW(50)
FH35-41S-0.3SHW(50)
FH35-45S-0.3SHW(50)
FH35-51S-0.3SHW(50)
13
15
17
19
21
25
27
31
33
35
39
41
45
51
5.5
4.23
4.83
4.93
6.1
3.6
4.2
4.8
5.4
6.6
7.2
8.4
9
5.53
6.7
5.43
6.13
580-1502-3-50
Note 3
7.3
6.03
6.73
7.9
6.63
7.33
580-1504-9-50
Note 3
9.1
7.2
7.8
9
7.83
8.53
9.7
8.43
9.13
YES
Note 3
10.9
11.5
12.1
13.3
13.9
15.1
16.9
9.63
10.33
10.93
11.53
12.73
13.33
14.53
16.33
580-1503-6-50
580-1501-0-50
Note 3
9.6
10.2
11.4
12
10.23
10.83
12.03
12.63
13.83
15.63
9.6
10.8
11.4
12.6
14.4
Note 3
580-1505-1-50
580-1506-4-50
13.2
15
Tape and reel packaging (5,000 pieces/reel).
Order by number of reels.
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended PCB mounting pattern and metal mask dimensions
(Recommended metal mask thickness: t=0.1)
B
0.05
0.3 0.03
0.6 0.05
(0.23:Metal mask)
0.3 0.05
(0.3:Metal mask)
0.3 0.03
0.6 0.05
(0.23:Metal mask)
0.4 0.05
0.5 0.05
C
0.05
BRecommended FPC Dimensions
F
C
0.05
0.03
0.3 0.07
0.3 0.07
0.2 0.03
0.6 0.02
0.3 0.02
+0.04
–0.03
0.3
H
Check mark for
press misalignment
(For reference)
+0.04
–0.03
0.3
0.1 0.02
(0.2)
(0.07)
0.6 0.07
B
0.03
0.6 0.07
Dimension M must be 0.5mm minimum when the stiffener is shorter than 2.75 min.
All dimensions: mm
Part Number
CL No.
Note 2
Number of contacts
B
3
C
3.6
4.2
4.8
5.4
6
F
FH35-13S-0.3SHW(50)
FH35-15S-0.3SHW(50)
FH35-17S-0.3SHW(50)
FH35-19S-0.3SHW(50)
FH35-21S-0.3SHW(50)
FH35-25S-0.3SHW(50)
FH35-27S-0.3SHW(50)
FH35-31S-0.3SHW(50)
FH35-33S-0.3SHW(50)
FH35-35S-0.3SHW(50)
FH35-39S-0.3SHW(50)
FH35-41S-0.3SHW(50)
FH35-45S-0.3SHW(50)
FH35-51S-0.3SHW(50)
13
15
17
19
21
25
27
31
33
35
39
41
45
51
4.2
4.8
5.4
6
Note 2
3.6
4.2
4.8
5.4
6.6
7.2
8.4
9
Note 2
580-1502-3-50
Note 2
6.6
7.8
8.4
9.6
10.2
10.8
12
580-1504-9-50
Note 2
7.2
7.8
9
Note 2
580-1503-6-50
580-1501-0-50
Note 2
9.6
10.2
11.4
12
9.6
10.8
11.4
12.6
14.4
Note 2
12.6
13.8
15.6
580-1505-1-50
580-1506-4-50
13.2
15
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPackaging Specification
●Embossed Carrier Tape Dimensions(Tape width to 24mm max.)
4
0.1
2
8
0.15
0.1
(2.25)
(0.3)
(0.8)
(0.7)
(0.8)
(4.8)
(1.6) Flat surface, for placement with automatic equipment.
Unreeling direction
●Embossed Carrier Tape Dimensions(Tape width 32mm min.)
(2.25)
(0.3)
1.5+0.1
0
All dimensions: mm
Part Number
CL No.
Note 1
Note 1
Note 1
Number of contacts
G
H
–
J
K
L
M
FH35-13S-0.3SHW(50)
FH35-15S-0.3SHW(50)
FH35-17S-0.3SHW(50)
FH35-19S-0.3SHW(50)
FH35-21S-0.3SHW(50)
FH35-25S-0.3SHW(50)
FH35-27S-0.3SHW(50)
FH35-31S-0.3SHW(50)
FH35-33S-0.3SHW(50)
FH35-35S-0.3SHW(50)
FH35-39S-0.3SHW(50)
FH35-41S-0.3SHW(50)
FH35-45S-0.3SHW(50)
FH35-51S-0.3SHW(50)
13
15
17
19
21
25
27
31
33
35
39
41
45
51
16
16
16
16
24
24
24
24
24
24
24
24
24
32
7.5
5.7
17.4
17.4
17.4
17.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
25.4
33.4
21.4
21.4
21.4
21.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
29.4
37.4
–
7.5
6.3
–
7.5
6.9
580-1502-3-50
Note 1
–
7.5
7.5
–
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
11.5
14.2
8.1
580-1504-9-50
Note 1
–
9.3
–
9.9
Note 1
–
11.1
11.7
12.4
13.5
14.1
15.3
17.1
580-1503-6-50
580-1501-0-50
Note 1
–
–
–
Note 1
–
580-1505-1-50
580-1506-4-50
–
28.4
Tape and reel packaging (5,000 pieces/reel).
Note 1: Reserved for future product expansion. Contact HRS for details on availability.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BReel Dimensions
(L: INSIDE)
(M: OUTSIDE)
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BTemperature Profile
●Using Lead-free Solder Paste
MAX 250ç
HRS test condition
Solder method
:Reflow, IR/hot air
250
200
150
100
50
(Nihon Den-netsu Co., Ltd.'s
Part Number: SENSBY NR-2)
:Room air
230ç
Environment
200ç
(ç)
Solder composition :Paste, 96.5%Sn/3.0%Ag/0.5%Cu
(Senju Metal Industry, Co., Ltd.'s
Part Number:M705-221CM5-42-10.5)
150ç
Test board
Land dimensions :0.3mm∞0.65mm, 0.3mm∞0.8mm
Metal mask :0.23∞0.55, 0.23∞0.65∞0.1mm thick
:Glass epoxy 25mm∞50mm∞0.8mm thick
The temperature profiles shown are based on the above
conditions.
25ç
(60sec.) 90 sec. to 120 sec.
Preheating
(60sec.)
Soldering
0
In individual applications the actual temperature may vary,
depending on solder paste type, volume / thickness and board
size / thickness. Consult your solder paste and equipment
manufacturer for specific recommendations.
Start
Time (Seconds)
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BRecommended FPC construction
●Contact FPC manufacturer for specific details
FPC : Flexible Printed Circuit
1. Using Single-sided FPC
Material Thickness
(μm)
Material Name
Material
Connecting side
Covering film layer
Cover adhesive
Polyimide 1 mil thick.
25
25
0.2μm thick gold plated over 1 to 5μm
nickel underplating
( )
3
Surface treatment
Copper foil
Cu
1oz
35
25
Base adhesive
Base film
Polyimide 1 mil thick
25
Reinforcement material adhesive Thermosetting adhesive
40
Stiffener
Polyimide 3 mil thick
Total
75
203
Back side
FPC : Flexible Printed Circuit
2. Using Double-sided FPC
Material Thickness
(μm)
Material Name
Material
Connecting side
Polyimide 1 mil thick
Covering layer film
Cover adhesive
Surface treatment
Through-hole copper
Copper foil
25
25
0.2μm thick gold plated over 1 to 5μm
nickel underplating
( )
3
Cu
15
18
18
25
18
18
25
25
25
25
197
Cu
1/2oz
Base adhesive
Base film
Polyimide 1 mil thick
Base adhesive
Copper foil
Cu
1/2oz
Cover adhesive
Covering film layer
Reinforcement material adhesive
Stiffener
Polyimide 1 mil thick
Thermosetting adhesive
Polyimide 1 mil thick
Total
Back side
*
To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is NOT RECOMMENDED.
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BConnector Operation and Precautions
Operation
Exercise care when handling connectors. Follow recommendations given below.
1. As delivered
1
Delivered with the actuator open. There is no need to operate the
actuator prior to the insertion of the FPC.
The actuator is open when delivered in
the embossed tape packaging
2. FPC insertion
1
Make sure that the conductive pads are facing up.
FPC conductive pads are facing up
2
Align the FPC perpendicular with the connector and insert it firmly
all the way.
3. FPC correct insertion verification
A visual comparison of the edge of the housing opening and the FPC pattern boundary will prevent diagonal inser-
tion and partial insertion errors.
FPC pattern boundary
Edge of the insulator body
Correct insertion
Diagonal insertion
Partial insertion
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Operation
4. Locking
1
After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center.
Rotate
Excessive force after the actuator is already closed
Do NOT close at the ends.
Push at the center of the actuator.
5. FPC removal (Lock release)
Carefully rotate the actuator up to 90°, lifting it at the center.
Rotate (lift)
Do not attempt to open more than 90°
Lift at the center
Do not open (lift) at one end.
* The actuator opens by rotating it in the direction OPPOSITE to the direction of the insertion of the FPC.
DO NOT attempt to open it from the same side as the insertion of the FPC.
10
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Precautions when mounting connectors on the PCB
◆Handling before mounting on PCB
Insertion of the FPC or operation of the actuator prior to mounting on the PCB is NOT RECOMMENDED.
◆PC board warpage
Minimize the warpage as much as possible. The connector is straight within 0.1 mm max. Make sure that the
mounting area flatness can accept the connector terminals without causing any failure of the solder joints.
◆Forces on the board
◆When braking the large PC board into individual boards exercise care NOT to damage the installed connectors.
◆When attaching the boards or other components with the screws make sure that any stresses will NOT cause
board deflections affecting the mounting areas of the connector
Connector
PCB
Other precautions
◆When hand soldering:
Do not perform hand soldering with the FPC inserted in the connector.
• Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads.
• Do not use excessive amount of solder or flux compounds.
Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds.
11
相关型号:
![](http://pdffile.icpdf.com/pdf2/p00250/img/page/FH35-13S-0-3_1515531_files/FH35-13S-0-3_1515531_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00250/img/page/FH35-13S-0-3_1515531_files/FH35-13S-0-3_1515531_2.jpg)
FH35-17S-0.3SHW(50)
Card Edge Connector, 17 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/FH35W-51S-0-_1770008_files/FH35W-51S-0-_1770008_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/FH35W-51S-0-_1770008_files/FH35W-51S-0-_1770008_2.jpg)
FH35-19S-0.3SHW(99)
Card Edge Connector, 19 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
![](http://pdffile.icpdf.com/pdf2/p00250/img/page/FH35-13S-0-3_1515531_files/FH35-13S-0-3_1515531_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00250/img/page/FH35-13S-0-3_1515531_files/FH35-13S-0-3_1515531_2.jpg)
FH35-21S-0.3SHW(50)
Card Edge Connector, 21 Contact(s), 1 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/FH35W-51S-0-_1770008_files/FH35W-51S-0-_1770008_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/FH35W-51S-0-_1770008_files/FH35W-51S-0-_1770008_2.jpg)
FH35-25S-0.3SHW(10)
Card Edge Connector, 25 Contact(s), 2 Row(s), Right Angle, 0.024 inch Pitch, Surface Mount Terminal, Locking
HRS
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_2.jpg)
FH35-25S-0.3SHW(50)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/FH35W-51S-0-_1770008_files/FH35W-51S-0-_1770008_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00292/img/page/FH35W-51S-0-_1770008_files/FH35W-51S-0-_1770008_2.jpg)
FH35-25S-0.3SHW(99)
Card Edge Connector, 25 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_2.jpg)
FH35-27S-0.3SHW(50)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_2.jpg)
FH35-27S-0.3SHW(99)
Card Edge Connector, 27 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
![](http://pdffile.icpdf.com/pdf2/p00269/img/page/FH35W-25S-0-_1615001_files/FH35W-25S-0-_1615001_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00269/img/page/FH35W-25S-0-_1615001_files/FH35W-25S-0-_1615001_2.jpg)
FH35-33S-0.3SHW(50)
Card Edge Connector, 33 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00248/img/page/FH35RW-25S-0_1503667_files/FH35RW-25S-0_1503667_2.jpg)
FH35-33S-0.3SHW(99)
Card Edge Connector, 33 Contact(s), 2 Row(s), Female, Right Angle, Surface Mount Terminal
HRS
![](http://pdffile.icpdf.com/pdf2/p00269/img/page/FH35W-25S-0-_1615001_files/FH35W-25S-0-_1615001_1.jpg)
![](http://pdffile.icpdf.com/pdf2/p00269/img/page/FH35W-25S-0-_1615001_files/FH35W-25S-0-_1615001_2.jpg)
FH35-35S-0.3SHW(50)
Card Edge Connector, 35 Contact(s), 2 Row(s), Female, Right Angle, 0.012 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明