FX10A-140P [HRS]
10Gbps 0.5mm pitch Stacking Connectors; 10Gbps的0.5mm间距堆叠连接器
| 型号： | FX10A-140P |
| 厂家： | 
HRS |
| 描述： | 10Gbps 0.5mm pitch Stacking Connectors |
| 文件： | 总20页 (文件大小：637K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
10+Gbps 0.5mm pitch Stacking Connectors
FX10 Series Electrical Interface for the OIF 100G Long-Haul DWDM Transmission Module (MSA-100GLH)
●Mechanical Features
● 0.5mm Pitch
● Stacking Height : 4 ~ 8mm
● Number of Contacts
With ground plate type : 80 / 100 / 120 / 140
Without ground plate type : 96 / 120 / 144 / 168
● Improved Transmission Efficiency
Between Boards
Transmission characteristics have been improved through a
design that fixes ground plates to both sides of the header
and receptacle.
●With GND Plate Type
● 10 Signal:1 Ground Arrangement
Signal and ground are arranged in a ratio of 10:1 with the
ground plate SMT connected to the board. The ground
stability achieved serves to reduce noise.
Ground
plate
● Metal Fittings for Added Solder Weld
Signal contact
Strength
Metal fittings provide greater adhesion to the board,
protecting against peeling. The unique connector design
provides a connection between the fitting and the ground
plate for a stronger ground.
Housing
Metal fitting
Ground plate and metal
fitting make contact
● Suited to High-Density Applications
The signal contact pitch of 0.5 mm produces a smaller
connector utilizing less board area for mounting.
●Cut Section
● High contact reliability
Effective mating length is 1.1 mm for signal contacts.
● Optional Ground Plate
An alternate style without the ground plate is available. The
space provided by the ground plate removal has been filled
with additional signal contacts.
●Signal Integrity Features
115
110
105
100
95
60
50
40
30
20
10
0
●Insertion-Loss-to-Crosstalk-Ratio(ICR)
The insertion-loss-to-crosstalk-ratio (ICR) with five-
aggressor differential FEXT meets the extrapolated
+
IEEE 802.3ap specification for 10 Gbps.
●Differential Impedance
The differential impedance is within 100 +/- 10 ohms
at 30ps rise time (20% to 80%).
ICR
90
85
ICR spec
S(3,3)
800 1000
0
2
4
6
8
10
0
200
400
Time (ps)
600
Frequency (GHz)
●Stack Height
●With ground plate
Headers
FX10#-*P/*-SV FX10#–*P/*–SV1
Receptacles
FX10#-*S/*-SV
4mm
5mm
●Without ground plate
Headers
FX10#-*P-SV FX10–*P–SV1 FX10#-168P-SV2 FX10#-168P-SV3 FX10#-168P-SV4
Receptacles
(H):Reference dimension
4mm
5mm
6mm
7mm
8mm
FX10#-*S-SV
2011.01w
1
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
MSA-100GLH Electrical Interface
●Product Specifications (Rating)
Operating temperature
Storage temperature -40 to +60ç
-55 to 85ç
range
range
(Note 2)
Note 1
Rated current
Rating
Operating humidity
range
Relative humidity 95% max
(No condensation)
Storage humidity
range
40 to 70%
(Note 2)
Rated voltage
50 V AC
Note 1: Refer to FX10-168pin derating curves from test reports TR570E-20587.
Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 3: Other information are shown in General Product Specifications.
●Receptacles without ground plate
Unit: mm
41.5 0.2
0.2 0.05
(P=0.5)
No.a2
No.a84
No.a83
No.a1
No.b1
No.b2
No.b83
No.b84
49.1 0.3
Guidepost
(Ø1)
(Ø1)
44.4 0.1
Number of Contacts
Signal
Part No.
Cꢀ No.
Remarks
(
)
)
With guideposts
Without guideposts
FX10A-168S-SV **
570-0244-7-**
570-0254-0-**
168
(
FX10B-168S-SV **
[Specifications number] -●●●, (●●●)
(83): Embossed tape packaging / AuP 0.76µm
(93): Tray packaging / AuP 0.76µm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
●
Recommended Land Pattern
●Board-to-Board Distance
HEAꢁER CONNECTOR
Dimensions(Metal Mask Dimensions)
FX10A(B)-168P-SV*(83)
SOꢀꢁER
3
Recommended metal mask thickness: 0.15mm
PCB
49.5+0.1
0
0
46.3-0.1
44.4 0.05
41.5 0.05
0.5 0.03
1
Ø1.2 0.05
No.a1
No.a2
No.a84
No.a83
1
Ø1.2 0.05
PCB
RECEPTACꢀE CONNECTOR
FX10A(B)-168S-SV(83)
SOꢀꢁER
3
FX10A(B)-168S-SV(83)
1
2
(A)
4
5
6
7
8
B
FX10A(B)-168P-SV(83)
4.3 0.127
5.3 0.127
6.0 0.127
7.0 0.127
8.0 0.127
No.b2
No.b1
No.b83
No.b84
FX10A(B)-168P-SV1(83)
FX10A(B)-168P-SV2(83)
FX10A(B)-168P-SV3(83)
FX10A(B)-168P-SV4(83)
1.45 0.05
0.3 0.03(ꢀANꢁ WIꢁTH)
0.25 0.03(METAꢀ MASꢂ)
Note
1
Not required in products without guideposts.
Note
1
2
3
Stacking height from lead to lead (reference dimensions)
Board-to-board distance
Stencil (metal mask) shall be based on Hirose's recommended aperture and thickness.
2
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
MSA-100GLH Electrical Interface
●Headers without ground plate
41.5 0.2
(P=0.50)
No.b2
No.a84
No.a83
0.2 0.05
No.b1
No.a1
No.a2
No.a83
No.a84
49.1 0.3
(Ø1)
(Ø1)
Guidepost
44.4 0.1
Unit: mm
Number of Contacts
Signal
Quantity/Reel
Part No.
Cꢀ No.
A
Remarks
(Note 3)
1,000
1,000
900
800
700
1,000
1,000
900
800
700
(
)
FX10A-168P-SV **
FX10A-168P-SV1 **
FX10A-168P-SV2 **
FX10A-168P-SV3 **
FX10A-168P-SV4 **
FX10B-168P-SV **
FX10B-168P-SV1 **
FX10B-168P-SV2 **
570-0044-8-**
570-0144-2-**
570-0302-1-**
570-0304-7-**
570-0306-2-**
570-0054-1-**
570-0154-6-**
570-0303-4-**
570-0305-0-**
570-0307-5-**
3.5
4.5
5.25
6.25
7.25
3.5
(
(
(
(
)
)
)
)
With guideposts
168
(
)
(
(
(
(
)
)
)
)
4.5
Without guideposts
5.25
6.25
7.25
FX10B-168P-SV3 **
FX10B-168P-SV4 **
[Specifications number] -●●●, (●●●)
(83): Embossed tape packaging / AuP 0.76µm
(93): Tray packaging / AuP 0.76µm
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel.
Note 4: Using multiple connectors between identical boards is not recommended.
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
49.5+0.1
0
46.3-00.1
44.4 0.05
41.5 0.05
Ø1.2 0.05
1
0.5 0.03
No.b1
No.b2
No.b84
No.b83
Ø1.2 0.05
1
No.a2
No.a1
No.a83
No.a84
1.45 0.05
0.3 0.03(ꢀANꢁ PATTERN)
0.25 0.03(METAꢀ MASꢂ)
Note 1 Not required in products without guideposts.
3
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Signal integrity
● Pin assignment
To match 100 ohm differential impedance and to reduce crosstalk, a staggered GSGSG pin assignment is recommended.
(G=ground and S=signal)
GSGSG
signal
Diff pair
ground
● Impedance
The differential impedance is 100 +/- 10 ohm for FX10 at 30 ps rise time (20% to 80%).
4 mm (without GNꢁ)
5 mm (without GNꢁ)
115
110
105
100
95
115
110
105
100
95
90
90
S(3,3)
1000
S(3,3)
800 1000
85
85
0
200
400
600
800
0
200
400
600
Time (ps)
Time (ps)
4 mm (with GNꢁ)
5 mm (with GNꢁ)
115
110
105
100
95
115
110
105
100
95
90
90
S(3,3)
800 1000
S(3,3)
1000
85
85
0
200
400
600
800
0
200
400
600
Time (ps)
Time (ps)
● Propagation delay
The propagation delay is 62 and 67 ps for FX10 of 4mm and 5mm height (with and without GNꢁ), respectively.
4
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
● Insertion loss
The differential insertion loss crosses 1 dB at 10.8 and 9.2 GHz for FX10 of 4mm and 5mm height, respectively.
4 mm (without GNꢁ) 5 mm (without GNꢁ)
0
0
IL
20
IL
20
0
5
10
15
0
5
10
15
Frequency (GHz)
Frequency (GHz)
4 mm (with GNꢁ)
5 mm (with GNꢁ)
0
IL
20
0
5
10
15
Frequency (GHz)
● Return loss
The differential return loss meets the IEEE 802.3ap specification to 20+ and 13.5 GHz for FX10 of 4mm and 5mm height,
respectively.
4 mm (without GNꢁ)
5 mm (without GNꢁ)
0
0
RL
RL
RL Spec
RL Spec
0
5
10
15
20
0
5
10
15
20
Frequency (GHz)
Frequency (GHz)
4 mm (with GNꢁ)
5 mm (with GNꢁ)
0
0
RL
RL
RL Spec
RL Spec
0
5
10
15
20
0
5
10
15
20
Frequency (GHz)
Frequency (GHz)
5
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
● Near-end crosstalk (NEXT)
The staggered GSGSG pin assignment results in low differential NEXT between neighboring pairs.
4 mm (without GNꢁ)
5 mm (without GNꢁ)
0
0
NEXT
NEXT
0
5
10
15
20
0
5
10
15
20
Frequency (GHz)
Frequency (GHz)
4 mm (with GNꢁ)
5 mm (with GNꢁ)
0
0
NEXT
NEXT
0
5
10
15
20
0
5
10
15
20
Frequency (GHz)
Frequency (GHz)
● Far-end crosstalk (FEXT)
The staggered GSGSG pin assignment results in low differential FEXT between neighboring pairs.
4 mm (without GNꢁ)
5 mm (without GNꢁ)
0
0
FEXT
FEXT
0
5
10
15
20
0
5
10
15
20
Frequency (GHz)
Frequency (GHz)
4 mm (with GNꢁ)
5 mm (with GNꢁ)
0
0
FEXT
FEXT
0
5
10
15
20
0
5
10
15
20
Frequency (GHz)
Frequency (GHz)
6
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
● Insertion-loss-to-crosstalk ratio (ICR)
The insertion-loss-to-crosstalk ratio (ICR) with five-aggressor differential FEXT meets the extrapolated IEEE 802.3ap specification
to 10+ Gbps.
4 mm (without GNꢁ)
5 mm (without GNꢁ)
60
50
40
30
20
10
0
60
50
40
30
20
10
0
ICR
ICR
ICR spec
ICR spec
0
2
4
6
8
10
0
2
4
6
8
10
Frequency (GHz)
Frequency (GHz)
4 mm (with GNꢁ)
5 mm (with GNꢁ)
60
50
40
30
20
10
0
60
50
40
30
20
10
0
ICR
ICR
ICR spec
ICR spec
0
2
4
6
8
10
0
2
4
6
8
10
Frequency (GHz)
Frequency (GHz)
7
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●General Product Specifications
Rated current
0.3 A
Operating temperature range
-55 to 85ç (Note 1)
Storage temperature range -10 to +60ç (Note 2)
Rating
Relative humidity 95% max
(No condensation)
Rated voltage
50 V AC
Operating humidity range
Storage humidity range
40 to 70% (Note 2)
Item
Requirements
Conditions
1. Insulation resistance 100 M ohm min
Measured at 100 V ꢁC
2. Voltage resistance No flashover or breakdown
3. Contact resistance 60 m ohm max
150 V AC applied for one minute
Measured at 100 mA
No electrical discontinuity for 1µs min
Frequency: 10 to 55 Hz, amplitude of 0.75 mm in 3 directions, 10
cycles each
4. Vibration
5. Shock
No damage, cracks, or parts looseness
2
No electrical discontinuity for 1µs min
Acceleration of 490 m/s , 11 ms duration, sine half-wave
No damage, cracks, or parts looseness
waveform, for 3 cycles in the both directions of each of the 3 axes
6. ꢁamp heat
(Steady state)
Contact resistance of 70 m ohm max, insulation resistance of
100 M ohm min, no damage, cracks, or parts looseness
Temperature of 40ç, humidity of 90 to 95%, duration 96 h
Contact resistance of 70 m ohm max, insulation resistance of Temperature: -55ç ● 15 to 35ç ● 85ç ● 15 to 35ç
7. Temperature cycle
8. ꢁurability
100 M ohm min, no damage, cracks, or parts looseness
Contact resistance of 70 m ohm max
Time: 30 min. ● 2 to 3 min. ● 30 min. ● 2 to 3 min. for 5 cycles
50 times
No damage, cracks, or parts looseness
9. Resistance to
soldering heat
Reflow: At the recommended temperature profile
Soldering iron temperature: 360ç for 5 seconds
No melting of resin portion which affects performance
Note 1: Includes temperature rise caused by current flow.
Note 2: The term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a long period.
The operating temperature and humidity range are suited to the non-conducting condition following board assembly.
Note 3: Information contained in this catalog represents general requirements for this series. Contact us for the drawings and specifications for a
specific part number shown.
●Materials
Part
Material
Process
Beige
Notes
Insulator
ꢀCP
Uꢀ94V-0
Contact Area: Gold plating
ꢀead Area: Tin plating
Contact Area: Gold plating
ꢀead Area: Flash plating
Tin plating
Header
Contacts
Phosphor bronze
Receptacle
Ground plate
Metal fitting
Phosphor bronze
Phosphor bronze
Tin plating
●Ordering Information
-
-
SV 1 (
FX10 #
P //
)
●●●
●
●
1
2
4
3
5
6
7
1
2
4
Series name : FX10
Form symbol
Connector type
P : Header
A : With guide post
B : Without guide post
Number of contacts
With ground plate
S : Receptacle
Contact form
5
6
SV : Straight SMT
Product height
3
Signal/Ground: 80/8, 100/10, 120/12,
140/14
Blank : Standard
1
: Standard + 1mm
7
Packaging classification
Blank, (71) : Tray packaging
(21), (91): Embossed tape packaging
Without ground plate
Signal: 96, 120, 144, 168
8
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Headers with ground plate
●4mm Stacking Height
Unit: mm
Number of Contacts
Part No.
Cꢀ No.
A
B
C
ꢁ
E
F
Remarks
Signal Ground
FX10A- 80P/ 8-SV(**)
FX10A-100P/10-SV(**)
FX10A-120P/12-SV(**)
FX10A-140P/14-SV(**)
FX10B- 80P/ 8-SV(**)
FX10B-100P/10-SV(**)
FX10B-120P/12-SV(**)
FX10B-140P/14-SV(**)
**
**
**
**
**
**
**
**
Cꢀ570-0001-5-
Cꢀ570-0002-8-
Cꢀ570-0003-0-
Cꢀ570-0004-3-
Cꢀ570-0021-2-
Cꢀ570-0022-5-
Cꢀ570-0023-8-
Cꢀ570-0024-0-
80
100
120
140
80
8
10
12
14
8
23.5 18 31.1 26.4 31.5 28.3
29.5 24 37.1 32.4 37.5 34.3
35.5 30 43.1 38.4 43.5 40.3
41.5 36 49.1 44.4 49.5 46.3
With guideposts
—
—
—
—
23.5 18 31.1
29.5 24 37.1
35.5 30 43.1
41.5 36 49.1
31.5 28.3
37.5 34.3
43.5 40.3
49.5 46.3
100
120
140
10
12
14
Without guideposts
[Specifications number] -●●●, (●●●)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
4
9
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Headers with ground plate
●5mm Stacking Height
A
0.2
(0.5)
0.5 0.05
0.2 0.05
(0.75)
(0.75)
(6)
B
C
0.2
0.3
2-(Ø1)
ꢁ
0.1
Guidepost
Unit: mm
Remarks
Number of Contacts
Part No.
Cꢀ No.
A
B
C
ꢁ
E
F
Signal Ground
FX10A- 80P/ 8-SV1(**)
FX10A-100P/10-SV1(**)
FX10A-120P/12-SV1(**)
FX10A-140P/14-SV1(**)
FX10B- 80P/ 8-SV1(**)
FX10B-100P/10-SV1(**)
FX10B-120P/12-SV1(**)
FX10B-140P/14-SV1(**)
Cꢀ570-0101-0-**
Cꢀ570-0102-2-**
Cꢀ570-0103-5-**
Cꢀ570-0104-8-**
Cꢀ570-0121-7-**
Cꢀ570-0122-0-**
Cꢀ570-0123-2-**
Cꢀ570-0124-5-**
80
100
120
140
80
8
10
12
14
8
23.5 18 31.1 26.4 31.5 28.3
29.5 24 37.1 32.4 37.5 34.3
35.5 30 43.1 38.4 43.5 40.3
41.5 36 49.1 44.4 49.5 46.3
With guideposts
Without guideposts
—
—
—
—
23.5 18 31.1
29.5 24 37.1
35.5 30 43.1
41.5 36 49.1
31.5 28.3
37.5 34.3
43.5 40.3
49.5 46.3
100
120
140
10
12
14
[Specifications number] -●●●, (●●●)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
4 Not required in products without guideposts.
10
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Receptacles with ground plate
A
0.2
(0.5)
0.5 0.05
0.2 0.05
(0.75)
(0.75)
(6)
B
C
0.2
0.3
2-(Ø1)
Guidepost
ꢁ
0.1
Unit: mm
Number of Contacts
Part No.
Cꢀ No.
A
B
C
ꢁ
E
F
Remarks
Signal Ground
FX10A- 80S/ 8-SV(**)
FX10A-100S/10-SV(**)
FX10A-120S/12-SV(**)
FX10A-140S/14-SV(**)
FX10B- 80S/ 8-SV(**)
FX10B-100S/10-SV(**)
FX10B-120S/12-SV(**)
FX10B-140S/14-SV(**)
Cꢀ570-0201-4-**
Cꢀ570-0202-7-**
Cꢀ570-0203-0-**
Cꢀ570-0204-2-**
Cꢀ570-0221-1-**
Cꢀ570-0222-4-**
Cꢀ570-0223-7-**
Cꢀ570-0224-0-**
80
100
120
140
80
8
10
12
14
8
23.5 18 31.1 26.4 31.5 28.3
29.5 24 37.1 32.4 37.5 34.3
35.5 30 43.1 38.4 43.5 40.3
41.5 36 49.1 44.4 49.5 46.3
With guideposts
—
—
—
—
23.5 18 31.1
29.5 24 37.1
35.5 30 43.1
41.5 36 49.1
31.5 28.3
37.5 34.3
43.5 40.3
49.5 46.3
100
120
140
10
12
14
Without guideposts
[Specifications number] -●●●, (●●●)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
Note 1 Cross-hatched portions, totaling n places, indicate the ground circuits.
2 Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
3 Not required in products without guideposts.
11
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Headers without ground plate
●4mm Stacking Height
A
0.2
(
)
0.2 0.05
0.5
B
C
0.3
2-(Ø1)
Guidepost
0.1
Unit: mm
Remarks
Number of Contacts
Part No.
Cꢀ No.
A
B
C
ꢁ
E
Signal
96
FX10A- 96P-SV(**)
FX10A-120P-SV(**)
FX10A-144P-SV(**)
FX10A-168P-SV(**)
FX10B- 96P-SV(**)
FX10B-120P-SV(**)
FX10B-144P-SV(**)
FX10B-168P-SV(**)
Cꢀ570-0041-0-**
Cꢀ570-0042-2-**
Cꢀ570-0043-5-**
Cꢀ570-0044-8-**
Cꢀ570-0051-3-**
Cꢀ570-0052-6-**
Cꢀ570-0053-9-**
Cꢀ570-0054-1-**
23.5 31.1 26.4 31.5 28.3
29.5 37.1 32.4 37.5 34.3
35.5 43.1 38.4 43.5 40.3
41.5 49.1 44.4 49.5 46.3
120
144
168
96
With guideposts
Without guideposts
—
—
—
—
23.5 31.1
29.5 37.1
35.5 43.1
41.5 49.1
31.5 28.3
37.5 34.3
43.5 40.3
49.5 46.3
120
144
168
[Specifications number] -●●●, (●●●)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
ꢁ+0.1
0
0
E-0.1
2 Ø1.2 0.05
C
A
0.05
0.05
2 Ø1.1 0.05
0.5 0.03
1.45 0.05
0.3 0.03(ꢀand)
0.25 0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
1
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
2
12
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Headers without ground plate
●5mm Stacking Height
A
0.2
(
)
0.2 0.05
0.5
B
C
0.3
0.1
2-(Ø 1)
Guidepost
Unit: mm
Remarks
Number of Contacts
Part No.
Cꢀ No.
A
B
C
ꢁ
E
Signal
96
FX10A- 96P-SV1(**)
FX10A-120P-SV1(**)
FX10A-144P-SV1(**)
FX10A-168P-SV1(**)
FX10B- 96P-SV1(**)
FX10B-120P-SV1(**)
FX10B-144P-SV1(**)
FX10B-168P-SV1(**)
Cꢀ570-0141-4-**
Cꢀ570-0142-7-**
Cꢀ570-0143-0-**
Cꢀ570-0144-2-**
Cꢀ570-0151-8-**
Cꢀ570-0152-0-**
Cꢀ570-0153-3-**
Cꢀ570-0154-6-**
23.5 31.1 26.4 31.5 28.3
29.5 37.1 32.4 37.5 34.3
35.5 43.1 38.4 43.5 40.3
41.5 49.1 44.4 49.5 46.3
120
144
168
96
With guideposts
Without guideposts
—
—
—
—
23.5 31.1
29.5 37.1
35.5 43.1
41.5 49.1
31.5 28.3
37.5 34.3
43.5 40.3
49.5 46.3
120
144
168
[Specifications number] -●●●, (●●●)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
ꢁ+0.1
0
0
E-0.1
2 Ø1.2 0.05
C
A
0.05
0.05
2 Ø1.1 0.05
0.5 0.03
1.45 0.05
0.3 0.03(ꢀand)
0.25 0.03(Metal mask)
Note 1 The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
2
13
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Receptacles without ground plate
A
0.2
(0.5 )
0.2 0.05
B
0.3
0.1
2-(Ø1)
C
Guidepost
Unit: mm
Remarks
Number of Contacts
Part No.
Cꢀ No.
A
B
C
ꢁ
E
Signal
96
FX10A- 96S-SV(**)
FX10A-120S-SV(**)
FX10A-144S-SV(**)
FX10A-168S-SV(**)
FX10B- 96S-SV(**)
FX10B-120S-SV(**)
FX10B-144S-SV(**)
FX10B-168S-SV(**)
Cꢀ570-0241-9-**
Cꢀ570-0242-1-**
Cꢀ570-0243-4-**
Cꢀ570-0244-7-**
Cꢀ570-0251-2-**
Cꢀ570-0252-5-**
Cꢀ570-0253-8-**
Cꢀ570-0254-0-**
23.5 31.1 26.4 31.5 28.3
29.5 37.1 32.4 37.5 34.3
35.5 43.1 38.4 43.5 40.3
41.5 49.1 44.4 49.5 46.3
120
144
168
96
With guideposts
Without guideposts
—
—
—
—
23.5 31.1
29.5 37.1
35.5 43.1
41.5 49.1
31.5 28.3
37.5 34.3
43.5 40.3
49.5 46.3
120
144
168
[Specifications number] -●●●, (●●●)
(71): Tray packaging
(91): Embossed tape packaging
Note 1: There is no polarity in terms of board mounting for this product.
Note 2: The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3: Please order embossed tape packaged items by the reel. (One reel holds 1,000 pieces.)
Note 4: Using multiple connectors between identical boards is not recommended.
●Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
ꢁ+0.1
0
0
E-0.1
C
0.05
0.05
Ø1.2 0.05
1
A
Ø1.1 0.05
0.5 0.03
1
0.3 0.03(ꢀand)
1.45 0.05
0.25 0.03(Metal mask)
Note 1 Not required in products without guideposts.
14
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Embossed Carrier Tape Dimensions
Unit: mm
●Headers
12 0.1
A
B
C
ꢁ
E
F
G
Insertion Connector
(ꢁ)
0.9
4
0.1
(
)
0.4
2
0.1
FX10#- 80P/ 8-SV 20.2 40.4 44
45.5 50.5
59 64
FX10#-100P/10-SV
26.2 52.4 56
FX10#-120P/12-SV
FX10#-140P/14-SV 34.2 68.4 72
FX10#- 96P -SV 20.2 40.4 44
76.5 81.5
45.5 50.5
3.8
330
FX10#-120P -SV
26.2 52.4 56
59 64
FX10#-144P -SV
FX10#-168P -SV 34.2 68.4 72
FX10#- 80P/ 8-SV1 20.2 40.4 44
76.5 81.5
45.5 50.5
(6.2)
(6.6)
Unreeling direction
FX10#-100P/10-SV1
26.2 52.4 56
59 64
FX10#-120P/12-SV1
FX10#-140P/14-SV1 34.2 68.4 72
FX10#- 96P -SV1 20.2 40.4 44
76.5 81.5
45.5 50.5
4.8
370
FX10#-120P -SV1
26.2 52.4 56
+0.05
R0.75
0
59 64
FX10#-144P -SV1
FX10#-168P -SV1 34.2 68.4 72
76.5 81.5
●Receptacles
Note: There is no polarity in terms of embossed tape
packaging for this product.
12 0.1
(
(
)
3.5
0.9
4
0.1
)
0.4
2
0.1
Unit: mm
A
B
C
E
F
G
Insertion Connector
FX10#- 80S/ 8-SV 20.2 40.4 44 45.5 50.5
FX10#-100S/10-SV
26.2 52.4 56 59 64
FX10#-120S/12-SV
FX10#-140S/14-SV 34.2 68.4 72 76.5 81.5
FX10#- 96S -SV 20.2 40.4 44 45.5 50.5
330
(7.6)
(8)
Unreeling direction
FX10#-120S -SV
26.2 52.4 56 59 64
FX10#-144S -SV
FX10#-168S -SV 34.2 68.4 72 76.5 81.5
Note: There is no polarity in terms of embossed tape
packaging for this product.
+0.05
0
R0.75
●Reel Dimensions
(E)
(F)
Ø13 0.5
15
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
●Recommended Temperature Profile
HRS test Conditions
Test board Glass epoxy 161mm∞100mm∞1.6mm thick
Solder method
:Reflow
Solder composition
:Paste,
96.5%Sn/3%Ag/0.5%Cu
:0.15mm thick
:2 cycles
Metal mask
Reflow cycles
The temperature profile is based on the above conditions.
In individual applications the actual temperature may vary,
depending on solder paste type,
volume/thickness and board size/thickness. Consult your
solder paste and equipment manufacturer for specific
recommendations.
●Washing Conditions
Organic Solvent Cleaning
Solvent
Room temperature washing Heated washing
IPA (Isopropyl alcohol)
Yes
Yes
Yes
Yes
HCFC (Hydrochlorofluorocarbon)
Water Type Cleaning
When using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the
documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins.
Be careful that parts are not left with moisture remaining on them.
Cleaning Precautions
Residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the
deterioration of electrical performance. In this regard it is important to check whether a thorough washing has been performed.
●Connector Handling Precautions
1. Allowable Creepage Dimensions at Time of Mating
The effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. The creepage of the
header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition.
2. Retension of Boards
Avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors.
3. Solder Repair
Flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of repair.
This will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into
consideration prior to connector washing.
4. Miscellaneous
·Note that excessive twisting while inserting or withdrawing connectors will cause damage.
·The shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance.
16
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
:
NOTES
17
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
:
NOTES
18
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
:
NOTES
19
FX10 Series●10+Gbps 0.5mm pitch Stacking Connectors
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, 37677 Professional Center Drive, Suite #100C
Phone : 1-805-522-7958
Fax : 1-805-522-3217
http://www.hiroseusa.com
CA 95014
Livonia, MI 48154
Phone : 1-408-253-9640
Fax : 1-408-253-9641
http://www.hiroseusa.com
Phone : 1-734-542-9963
Fax : 1-734-542-9964
http://www.hiroseusa.com
GERMANY:
THE NETHERLANDS:
UK:
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49-711-4560-02-1
Fax : 49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : 31-20-6557460
Fax : 31-20-6557469
http://www.hiroseeurope.com
HIROSE ELECTRIC EUROPE B.V. UK BRANCH
First Floor, St Andrews House, Caldecotte Lake
Business Park, Milton Keynes MK7 8LE
Phone : 44-1908-369060
Fax : 44-1908-369078
http://www.hirose.co.uk
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE
A1001, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road, Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : 86-10-5165-9332
Huang Pu District, Shanghai 200001
Phone : 86-21-6391-3355
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : 86-755-8207-0851
Fax : 86-10-5908-1381
Fax : 86-21-6335-0767
Fax : 86-755-8207-0873
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
HONG KONG:
SINGAPORE:
TAIWAN:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Unit 1102 A&B, Energy Plaza, 92 Granville Road,
Tsim Sha Tsui East, Kowloon
Phone : 852-2803-5338
HIROSE ELECTRIC CO., LTD.
10 Anson Road #26-16 International Plaza 079903
Phone : 65-6324-6113
65-6324-6123
Fax :
http://www.hirose-singapore.com.sg
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : 886-2-2555-7377
Fax : 886-2-2555-7350
Fax : 852-2591-6560
http://www.hirose-taiwan.com.tw
http://www.hirose-hongkong.com.hk
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : 82-31-496-7000,7124
Fax : 82-31-496-7100
http://www.hirose.co.kr
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 01/2011. Contents are subject to change without notice for the purpose of improvements.
20
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明