FX11B-100S/10-SV(91) [HRS]
Board Connector, 100 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle;
| 型号： | FX11B-100S/10-SV(91) |
| 厂家： | 
HRS |
| 描述： | Board Connector, 100 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle PC 连接器 |
| 文件： | 总16页 (文件大小：693K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
'#
*!(
bb
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm
High-Speed Board-to-Board Connections
FX11 Series
Stacking height : 2mm
Stacking height : 2.5mm, 3mm
10 Signal : 1 Ground Arrangement
■Features
1. Low Profile Design
The board-to-board mating height of 2mm, 2.5mm and 3mm suits
smaller, thinner case designs. (Fig.2)
2. Improved Transmission Efficiency Between Boards
Transmission characteristics have been improved through a design
that fixes ground plates to both sides of the header and receptacle.
Ground Plate
Signal contact
Housing
3. 10 Signal:1 Ground Arrangement
Metal fitting
Signal and ground are arranged in a ratio of 10 : 1 with the ground plate connected to
the board Via SMT. The ground stability achieved serves to reduce noise. (Fig.1)
Ground plate and metal fitting make contact
Fig.1
4. Metal Fittings for Added Strength
Stacking Height Variation
Metal fittings provide for greater adhesion to the board, which
protects the connector against sheaning forces. The unique
connector design provides a connection between the fitting and the
ground plate for a stronger ground
.
'bb
5. Suited to High-Density Applications
The signal contact pitch of 0.5mm affords a compact connector,
and reduces mounting space on the board.
Note: 2.0mm type product cannot be used or interchanged
with the 2.5mm or 3.0mm type product.
Fig.2
6. Structure Prevents Solder Wicking
A solder gap has been designed into the contact SMT portion to
prevent solder wicking. (Fig.3)
Structure Prevent Solder Wicking
HdaYZgꢀ\Veꢀedgi^dc
7. High Contact Reliability
7dVgYꢀbdjci^c\ꢀedgi^dc
AVcY
8dciVXi
hjg[VXZ
Effective wipe length is 0.55mm (2mm height) and 1mm(2.5mm,
3mm height) for signal contacts.
8. Optional Ground Plate
Fig.3
An alternate style is also available without the ground plate. The
space provided by the absence of the ground plate is filled with
additional signal contacts.
■Signal Integrity Features
●Insertion-Loss-to-Crosstalk Ratio (ICR)
Impedance 3mm(Without GND)
120
The insertion-loss-to-crosstalk
ratio (ICR) with five differential
FEXT aggressors meets the
extrapolated IEEE802.3ap
ICR 3mm(Without GND)
60
50
115
110
105
100
95
+
40
30
20
specification to 10 Gbps.
●Differential Impedance
90
The differential impedance is
10
0
+
100 /- 10ø for FX11 at 50 ps
85
80
ICR
FX11- 3mm DifferentialTDR
IEEEspec
rise time(20% to 80%).
0
1
2
3
4
5
6
7
8
9
10
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
Time(ns)
Frequency(GHz)
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2017.11e
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
BStacking height variation
● With ground plate
Header
FX11L#-*P / *-SV
2mm
Receptacle
FX11L#-*S / *-SV
Header
FX11#-*P / *-SV
2.5mm
FX11#-*P / *-SV0.5
3mm
Receptacle
FX11#-*S / *-SV
● Without ground plate
Header
FX11L#-*P-SV
2mm
Receptacle
FX11L#-*S-SV
Header
FX11#-*P-SV
2.5mm
FX11#-*P-SV0.5
3mm
Receptacle
FX11#-*S-SV
Note 1: The thickness of the solder paste is not included in the stacking height.
Note 2: 2mm type and 2.5mm, 3mm type, with ground plate type and without ground type are not mated with each other.
BCross section of mating
● Stacking height : 2mm
H^\cVaꢀedgi^dc
<gdjcYꢀedgi^dc
=ZVYZg
GZXZeiVXaZ
● Stacking height : 2.5mm, 3mm
H^\cVaꢀedgi^dc
<gdjcYꢀedgi^dc
=ZVYZg
GZXZeiVXaZ
(Shown for stacking height 2.5mm type.)
2
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
Stacking height : 2mm
■Product Specifications
-55 to +85ç
Rated current 0.3A
Operating temperature range
Operating humidity range
Storage temperature range -10 to +60ç (Note 1)
Rating
Relative humidity 95% or less
(No condensation)
Rated voltage 50V AC
Storage humidity range
-40 to -70% (Note 1)
Item
Requirements
Conditions
1. Insulation resistance 100Mø or greater
2. Withstanding voltage No flashover or breakdown
3. Contact resistance 60mø or less
Measured at 100V DC
150V AC applied for 1 minute
Measured at 100mA
No electrical discontinuity for 1μs or greater
No damaged, cracked or loose parts
Frequency : 10 to 55Hz, amplitude of 0.75mm
in 3 directions, 10 cycles each
4. Vibration resistance
5. Shock resistance
2
No electrical discontinuity for 1μs or longer
No damaged, cracked or loose parts
Acceleration of 490m/s , 11ms duration, sine half-wave
waveform, for 3 cycles in the both directions of each of the 3 axes
6. Humidity
resistance
Contact resistance of 70m
ø
or less, insulation resistance of Temperature of 40ç, humidity of 90 to 95%,
duration 96h
100M or greater, No damaged, cracked or loose parts
ø
Contact resistance of 70m or less, insulation resistance of Temperature : -55ç → 15 to 35ç → 85ç → 15 to 35ç
ø
7. Temperature cycle
8. Mating cycles
100Mø
or greater, No damaged, cracked or loose parts
Time : 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. for 5 cycles
Contact resistance of 70mø or less
No damaged, cracked or loose parts
50 times
Reflow : At the recommended temperature profile
Soldering iron temperature : 360ç for 5 seconds
9. Solder heat
resistance
No melting of resin portion which affects performance
Note 1 : The term “storage” refers to the long-term-storage status of unused items before mounting on the PCB.
The operating temperature/humidity ranges apply to the unmated state after board mounting.
■Materials / Finish
Part
Material
Finish
Remarks
UL94V-0
Insulator
LCP
Beige
Copper alloy
Header
Engagement Area : Gold plating of 0.1μm
Termination Area : Flash plating
Contacts
----------
Phosphor bronze
Phosphor bronze
Receptacle
Tin plating
Ground plate
Metal fitting
Metal plate
----------
----------
----------
Phosphor bronze
Tin plating
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Type With Ground Plate
-
(
)
FX11L # * P - / * - SV **
2
4
1
5
6
3
Type Without Ground Plate
-
(
)
FX11L # * P - SV **
1
2
3
4
5
6
1
4
Connector type
Series name
: FX11L
2
P
S
:
:
Header
Form Symbol
A
B
:
:
With guide post
Without guide post
Receptacle
3
5
6
Contact form
SV Straight SMT
Number of contacts
Type with ground plate
:
Signal/Ground : 60/6, 80/8,
100/10, 120/12
Blank, (71) : Tray packaging (Without pick-and-place tape)
(21),(91) : Embossed tape packaging (Without pick-and-place tape)
(22),(92) : Embossed tape packaging (With pick-and-place tape)
Type without ground plate
Signal : 68, 92, 116, 140
3
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
6¤%#'
■Header with Ground Plate
● 2mm stacking height
ꢁ%#*ꢂ
%#'¤%#%*
¬
ꢁ%#,*ꢂ
ꢁ%#,*ꢂ
ꢁ+ꢂ
7¤%#'
8¤%#(
'"ꢁ¢%#-ꢂ
9¤%#&
<j^YZedhi
Unit : mm
RoHS
No. of Contacts
Signal Ground
Part No.
HRS No.
A
B
C
D
E
F
Remarks
FX11LA-60P/6-SV(71)
FX11LA-80P/8-SV(71)
573-0002-7 71
573-0003-0 71
60
80
6
8
17.5 12 22.6 18 19.4 25.5
23.5 18 28.6 24 25.4 31.5
29.5 24 34.6 30 31.4 37.5
35.5 30 40.6 36 37.4 43.5
17.5 12 22.6 ---------- 19.4 25.5
23.5 18 28.6 ---------- 25.4 31.5
29.5 24 34.6 ---------- 31.4 37.5
35.5 30 40.6 ---------- 37.4 43.5
With guideposts
FX11LA-100P/10-SV(71) 573-0004-2 71
FX11LA-120P/12-SV(71) 573-0005-5 71
100
120
60
10
12
6
Yes
FX11LB-60P/6-SV(71)
FX11LB-80P/8-SV(71)
573-0012-0 71
573-0013-3 71
80
8
Without guideposts
FX11LB-100P/10-SV(71) 573-0014-6 71
FX11LB-120P/12-SV(71) 573-0015-9 71
100
120
10
12
[Specifications number] – **, (**)
(71) : Tray packaging
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
)
;ꢀb^c
%#&
8
ꢀꢀ
%
ꢀꢀ
%
:
"" %#&
9¤%#%*
6¤%#%*
%#*¤%#%(
%#,*¤%#%(
%#,*¤%#%(
(
(
¢%#.¤%#%*
%#'*¤%#%*
¢&¤%#%*
&
+¤%#%* %#,¤%#%(ꢁAVcYꢂ
%#+¤%#%(ꢁBZiVaꢀbVh`ꢂ
7¤%#%*
%#(¤%#%(ꢁAVcYꢂ
%#'*¤%#%(ꢁBZiVaꢀBVh`ꢂ
(¤%#%*
1
2
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
3
4
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
4
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
■Receptacle with Ground Plate
● 2mm stacking height
6¤%#'
ꢁ%#*ꢂ
%#*¤%#%*
%#'¤%#%*
ꢁ%#,*ꢂ
ꢁ%#,*ꢂ
ꢁ+ꢂ
7¤%#'
8¤%#(
'"ꢁ¢%#-ꢂ
9¤%#&
<j^YZedhi
Unit : mm
RoHS
No. of Contacts
Signal Ground
Part No.
HRS No.
A
B
C
D
E
F
Remarks
FX11LA-60S/6-SV(71)
FX11LA-80S/8-SV(71)
573-0102-1 71
573-0103-4 71
60
80
6
8
17.5 12
23.5 18
29.5 24
35.5 30
17.5 12
23.5 18
29.5 24
35.5 30
25 20.8 25.4 22.2
31 26.8 31.4 28.2
37 32.8 37.4 34.2
43 38.8 43.4 40.2
25 ---------- 25.4 22.2
31 ---------- 31.4 28.2
37 ---------- 37.4 34.2
43 ---------- 43.4 40.2
With guideposts
FX11LA-100S/10-SV(71) 573-0104-7 71
FX11LA-120S/12-SV(71) 573-0105-0 71
100
120
60
10
12
6
Yes
FX11LB-60S/6-SV(71)
FX11LB-80S/8-SV(71)
573-0112-5 71
573-0113-8 71
80
8
Without guideposts
FX11LB-100S/10-SV(71) 573-0114-0 71
FX11LB-120S/12-SV(71) 573-0115-3 71
100
120
10
12
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
%#&
:
;
ꢀꢀ
%
ꢀꢀ
%
"" %#&
9¤%#%*
6¤%#%*
%#*¤%#%(
%#,*¤%#%(
%#,*¤%#%(
'
)
)
¢%#.¤%#%*
¢&¤%#%*
&
%#,
%#%(
%#%*
¤
%#%(ꢁAVcYꢂ
%#(
¤%#%(ꢁAVcYꢂ
&#+*¤%#%*
+¤%#%*
%#+
¤
ꢁ
BZiVaꢀbVh`ꢂ
%#'* %#%(ꢁBZiVaꢀbVh`ꢂ
¤
)#)¤%#%*
7¤
1
2
3
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, 2 places on both sides, indicate the metal fittings.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
4
5
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
■Header without Ground Plate
● 2mm stacking height
6¤%#'
ꢁ%#*ꢂ
%#'¤%#%*
7¤%#(
'"ꢁ¢%#-ꢂ
<j^YZedhi
8¤%#&
Unit : mm
RoHS
No. of Contacts
Part No.
HRS No.
A
B
C
D
E
Remarks
Signal
68
FX11LA-68P-SV(**)
FX11LA-92P-SV(**)
573-0042-1 **
573-0043-4 **
16.5 22.6 18 19.4 25.5
22.5 28.6 24 25.4 31.5
28.5 34.6 30 31.4 37.5
34.5 40.6 36 37.4 43.5
16.5 22.6 ---------- 19.4 25.5
22.5 28.6 ---------- 25.4 31.5
28.5 34.6 ---------- 31.4 37.5
34.5 40.6 ---------- 37.4 43.5
92
With guideposts
FX11LA-116P-SV(**) 573-0044-7 **
FX11LA-140P-SV(**) 573-0045-0 **
116
140
68
Yes
FX11LB-68P-SV(**)
FX11LB-92P-SV(**)
573-0052-5 **
573-0053-8 **
92
Without guideposts
FX11LB-116P-SV(**) 573-0054-0 **
FX11LB-140P-SV(**) 573-0055-3 **
116
140
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
B
Recommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
(
:ꢀb^c
%#&
7
ꢀꢀ
%
ꢀꢀ
%
9"" %#&
8¤%#%*
6¤%#%*
%#*¤%#%(
'
'
¢&¤%#%*
¢%#.¤%#%*
%#,*¤%#%*
%#(¤%#%(ꢁAVcYꢂ
%#'*¤%#%(ꢁBZiVaꢀbVh`
ꢂ
1
2
Note
The cross-hatched area
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
inside the SMT land may come into contact with the connector contacts
3 Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
6
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
■Receptacle without Ground Plate
● 2mm stacking height
6¤%#'
7¤%#'
%#'¤%#%*
%#*¤%#%*
ꢁ%#*ꢂ
8¤%#(
9¤%#&
C
<j^YZedhi
Unit : mm
No. of Contacts
Part No.
HRS No.
A
B
D
Remarks
RoHS
Signal
68
FX11LA-68S-SV(**)
FX11LA-92S-SV(**)
573-0142-6 **
573-0143-9 **
18 16.5 25 20.8
24 22.5 31 26.8
30 28.5 37 32.8
36 34.5 43 38.8
92
With guideposts
FX11LA-116S-SV(**) 573-0144-1 **
FX11LA-140S-SV(**) 573-0145-4 **
116
140
68
Yes
FX11LB-68S-SV(**)
FX11LB-92S-SV(**)
573-0152-0 **
573-0153-2 **
18 16.5 25
24 22.5 31
30 28.5 37
36 34.5 43
----------
----------
----------
----------
92
Without guideposts
FX11LB-116S-SV(**) 573-0154-5 **
FX11LB-140S-SV(**) 573-0155-8 **
116
140
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
9¤%#%*
6¤%#%*
7¤%#%*
%#*¤%#%(
'
'
¢%#.¤%#%*
¢&¤%#%*
'#&*¤
%#%*
%#,¤%#%(ꢁAVcYꢂ
%#+¤%#%(ꢁBZiVaꢀbVh`ꢂ
%#(¤%#%(ꢁAVcYꢂ
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
1
Note
The cross-hatched area
and thus care should be taken that the pattern does not extend beyond the SMT land width.
2 Not required in products without guideposts.
inside the SMT land may come into contact with the connector contacts
7
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
Stacking height : 2.5mm, 3mm
■Product Specifications
+
-55 to 85ç
Rated current
Rated voltage
0.3A
Operating temperature range
Operating humidity range
-10 to +60ç (Note 1)
-40 to -70% (Note 1)
Storage temperature range
Storage humidity range
Rating
Relative humidity 95% or less
50V AC
(No condensation)
Item
Requirements
Conditions
1. Insulation resistance 100Mø or greater
Measured at 100V DC
2. Withstanding voltage No flashover or breakdown
150V AC applied for 1 minute
Measured at 100mA
3. Contact resistance
70mø or less
No electrical discontinuity for 1μs or greater
No damaged, cracked or loose parts
Frequency : 10 to 55Hz, amplitude of 0.75mm
in 3 directions,10 cycles each
4. Vibration resistance
2
No electrical discontinuity for 1μs or longer
No damaged, cracked or loose parts
Acceleration of 490m/s , 11ms duration, sine half-wave
5. Shock resistance
6. Humidity resistance
7. Temperature cycle
8. Mating cycles
waveform, for 3 cycles in the both directions of each of the 3 axes
Contact resistance of 80m
of 100Mø or greater, No damaged, cracked or loose parts
ø
or less, insulation resistance Temperature of 40ç, humidity of 90 to 95%,
duration 96h
Contact resistance of 80mø or less, insulation resistance Temperature : -55ç → 15 to 35ç → 85ç → 15 to 35ç
of 100Mø or greater, No damaged, cracked or loose parts
Time : 30 min. → 2 to 3 min. → 30 min. → 2 to 3 min. for 5 cycles
Contact resistance of 80mø or less
No damaged, cracked or loose parts
50 times
No melting of resin portion which affects
performance
Reflow : At the recommended temperature profile
Soldering iron temperature : 360ç for 5 seconds
9. Solder heat resistance
Note 1 : The term “storage” refers to the long-term-storage status of unused items before mounting on the PCB.
The operating temperature/humidity ranges apply to the unmated state after board mounting.
■Materials / Finish
Part
Material
Finish
Remarks
UL94V-0
Insulator
LCP
Beige
Copper alloy
Header
Engagement Area : Gold plating of 0.1μm
Termination Area : Flash plating
Contacts
----------
Phosphor bronze
Phosphor bronze
Receptacle
Tin plating
Ground plate
Metal fitting
Metal plate
----------
----------
----------
Phosphor bronze
Tin plating
Product Number Structure
■
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Type With Ground Plate
Type Without Ground Plate
-
(
)
FX11 # * P / * - SV 0.5 **
❶
❷
❹
❺
❻
❼
❸
-
(
)
FX11 # * P - SV 0.5 **
❹
❺
❻
❼
❸
❶
❷
Connector type
❶ Series name
:
FX11
❹
P
S
:
:
Header
Receptacle
Form Symbol
A
B
:
:
With guide post
❷
Without guide post
Contact form
Product height
SV : Straight SMT
❺
❻
Number of contacts
❸
Type with ground plate
Blank: Standard
0.5 : Standard + 0.5mm
Blank, (71) : Tray packaging (Without pick-and-place tape)
(21),(91) : Embossed tape packaging (Without pick-and-place tape)
(22),(92) : Embossed tape packaging (With pick-and-place tape)
Signal/Ground:60/6,
80/8, 100/10
❼
Type without ground plate
Signal : 80, 100
8
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
6¤%#'
■Header with Ground Plate
● 2.5mm stacking height
ꢁ
ꢂ
%#*¤%#%*
%#*
%#'¤%#%*
ꢁ
ꢂ
ꢁ
ꢂ
%#,*
%#,*
ꢁ
ꢂ
+
7¤%#'
8¤%#(
'"ꢁ¢%#-ꢂ
<j^YZedhi
9¤%#&
Unit : mm
No. of Contacts
Signal Ground
Part No.
HRS No.
A
B
C
D
E
F
Remarks
RoHS
FX11A-60P/06-SV(71) 573-0502-0 71
FX11A-80P/08-SV(71) 573-0503-2 71
FX11A-100P/10-SV(71) 573-0504-5 71
FX11B-60P/06-SV(71) 573-0512-3 71
FX11B-80P/08-SV(71) 573-0513-6 71
FX11B-100P/10-SV(71) 573-0514-9 71
60
80
6
8
17.5 12 22.6 18 19.4 25.5
23.5 18 28.6 24 25.4 31.5 With guideposts
29.5 24 34.6 30 31.4 37.5
100
60
10
6
Yes
17.5 12 22.6 ---------- 19.4 25.5
80
8
23.5 18 28.6 ---------- 25.4 31.5 Without guideposts
29.5 24 34.6 ---------- 31.4 37.5
100
10
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
)
;ꢀb^c
%#&
8
ꢀ%
ꢀ%
ꢀ
:
9¤%#%*
6¤%#%*
%#*¤%#%(
%#,*¤%#%(
%#,*¤%#%(
(
¢%#.¤%#%*
%#'*¤%#%*
(
¢&¤%#%*
ꢁAVcYꢂ
+¤%#%* %# ꢀ¤%#%(
&
%#(¤%#%(ꢁAVcYꢂ
%#+¤%#%(ꢁBZiVaꢀbVh`ꢂ
7¤%#%*
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
(¤%#%*
1
2
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
3
4
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
9
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
6¤%#'
■Header with Ground Plate
ꢁ%#*ꢂ
%#*¤%#%*
● 3mm stacking height
%#'¤%#%*
ꢁ%#,*ꢂ
ꢁ%#,*ꢂ
ꢁ+ꢂ
7¤%#'
8¤%#(
'"ꢁ¢%#-ꢂ
<j^YZedhi
9¤%#&
Unit : mm
RoHS
No. of Contacts
Signal Ground
Part No.
HRS No.
A
B
C
D
E
F
Remarks
FX11A-60P/6-SV0.5(71)
FX11A-80P/8-SV0.5(71)
573-0602-4 71
573-0603-7 71
60
80
6
8
17.5 12 22.6 18 19.4 25.5
23.5 18 28.6 24 25.4 31.5
29.5 24 34.6 30 31.4 37.5
17.5 12 22.6 ---------- 19.4 25.5
23.5 18 28.6 ---------- 25.4 31.5
29.5 24 34.6 ---------- 31.4 37.5
With
guideposts
FX11A-100P/10-SV0.5(71) 573-0604-0 71
100
60
10
6
Yes
FX11B-60P/6-SV0.5(71)
FX11B-80P/8-SV0.5(71)
573-0612-8 71
573-0613-0 71
Without
80
8
guideposts
FX11B-100P/10-SV0.5(71) 573-0614-3 71
100
10
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
)
;b^c
%#&
8
ꢀ%
ꢀ%
:
"%#&
9¤%#%*
6¤%#%*
%#*¤%#%(
%#,*¤%#%(
%#,*¤%#%(
¢%#.¤%#%*
%#'*¤%#%*
(
¢&¤%#%*
(
&
+¤%#%*
%#,¤%#%(ꢁAVcYꢂ
%#+¤%#%(ꢁBZiVaꢀbVh`ꢂ
7¤%#%*
%#(¤%#%(ꢁAVcYꢂ
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
(¤%#%*
1
2
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
3
4
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
10
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
6¤%#'
■Receptacle with Ground Plate
● 2.5mm, 3mm stacking height
ꢁ%#*ꢂ
%#*¤%#%*
%#'¤%#%*
ꢁ%#,*ꢂ
ꢁ%#,*ꢂ
ꢁ+ꢂ
7¤%#'
8¤%#(
<j^YZedhi
'"ꢁ¢%#-ꢂ
9¤%#&
Unit : mm
Remarks RoHS
No. of Contacts
Signal Ground
Part No.
HRS No.
A
B
C
D
E
F
FX11A-60S/6 SV(71) 573-0702-9 71
FX11A-80S/8 SV(71) 573-0703-1 71
FX11A-100S/10 SV(71) 573-0704-4 71
FX11B-60S/6 SV(71) 573-0712-2 71
FX11B-80S/8 SV(71) 573-0713-5 71
FX11B-100S/10 SV(71) 573-0714-8 71
60
80
6
8
17.5 12
23.5 18
29.5 24
17.5 12
23.5 18
29.5 24
25 20.8 25.4 22.2
31 26.8 31.4 28.2 With guideposts
37 32.8 37.4 34.2
100
60
10
6
Yes
25
31
37
---------- 25.4 22.2
80
8
---------- 31.4 28.2 Without guideposts
---------- 37.4 34.2
100
10
[Specifications number] – **, (**)
(71) : Tray packaging (Without pick-and-place tape)
(91) : Embossed tape packaging (Without pick-and-place tape)
(92) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
%#&
:
ꢀꢀꢀ
%
ꢀ
%
;
"%#&
9¤%#%*
6¤%#%*
%#*¤%#%(
%#,*¤%#%(
%#,*¤%#%(
'
)
)
¢%#.¤%#%*
¢&¤%#%*
+¤%#%* %#,¤%#%(ꢁAVcYꢂ
%#+¤%#%(ꢁBZiVaꢀbVh`ꢂ
7¤%#%*
%#(¤%#%(ꢁAVcYꢂ
&#+*¤%#%*
)#)¤%#%*
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
1
2
3
Note
Cross-hatched portions, totaling n places, indicate the ground circuits.
Cross-hatched portions, totaling 2 places, indicate the metal fittings.
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
4
11
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
■Header without Ground Plate
● 2.5mm stacking height
6¤%#'
ꢁ%#*ꢂꢀ
%#'¤%#%*
7¤%#(
'"ꢁ¢%#-ꢂ
<j^YZedhi
8¤%#&
Unit : mm
RoHS
No. of Contacts
Part No.
HRS No.
A
B
C
D
E
Remarks
Signal
80
FX11A-80P-SV(**)
FX11A-100P-SV(**)
FX11B- 80P-SV(**)
FX11B-100P-SV(**)
573-0548-0 **
573-0543-7 **
573-0558-4 **
573-0553-0 **
19.5 24.6 20 21.4 27.5
24.5 29.6 25 26.4 32.5
19.5 24.6 ---------- 21.4 27.5
24.5 29.6 ---------- 26.4 32.5
With guideposts
100
80
Yes
Without guideposts
100
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
(
:ꢀb^c
%#&
7ꢀꢀꢀ
%
ꢀꢀ
%
9
"%#&
8¤%#%*
6¤%#%*
%#*¤%#%(
'
¢%#.¤%#%*
'
¢&¤%#%*
%#'*¤%#%*
%#(ꢁAVcYꢂ
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
1
Note
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
2
3
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
12
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
■Header without Ground Plate
● 3mm stacking height
6¤%#'
ꢁ%#*ꢂꢀ
%#'¤%#%*
7¤%#(
8¤%#&
'"ꢁ¢%#-ꢂ
<j^YZedhi
Unit : mm
RoHS
No. of Contacts
Part No.
HRS No.
A
B
C
D
E
Remarks
Signal
80
FX11A-80P-SV0.5(**) 573-0648-5 **
FX11A-100P-SV0.5(**) 573-0643-1 **
FX11B-80P-SV0.5(**) 573-0658-9 **
FX11B-100P-SV0.5(**) 573-0653-5 **
19.5 24.6 20 21.4 27.5
24.5 29.6 25 26.4 32.5
19.5 24.6 ---------- 21.4 27.5
24.5 29.6 ---------- 26.4 32.5
With guideposts
100
80
Yes
Without guideposts
100
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
(
:ꢀb^c
%#&
7ꢀꢀꢀ
%
ꢀꢀ
%
9
"%#&
8¤%#%*
6¤%#%*
%#*¤%#%(
'
¢%#.¤%#%*
'
¢&¤%#%*
%#'*¤%#%*
%#(ꢁAVcYꢂ
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
1
Note
The cross-hatched area
inside the SMT land may come into contact with the connector contacts
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
2
3
Do not mount a part other than this product in the area of
of this and the mating connector.
. Doing so will prevent the engagement
13
ꢁ%# ꢀꢂ
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
6¤%#'
■Receptacle without Ground Plate
● 2.5mm, 3mm stacking height
%#'¤%#%*
7¤%#(
'"ꢁ¢%# ꢀꢂ
<j^YZedhi
8¤%#&
Unit : mm
RoHS
No. of Contacts
Part No.
HRS No.
A
B
C
D
E
Remarks
Signal
80
FX11A-80S-SV(**)
FX11A-100S-SV(**)
FX11B-80S-SV(**)
FX11B-100S-SV(**)
573-0748-0 **
573-0743-6 **
573-0758-3 **
573-0753-0 **
19.5 27 22.8 27.4 24.2
24.5 32 27.8 32.4 29.2
With guideposts
100
80
Yes
19.5 27
24.5 32
---------- 27.4 24.2
---------- 32.4 29.2
Without guideposts
100
[Specifications number] – **, (**)
Blank : Tray packaging (Without pick-and-place tape)
(21) : Embossed tape packaging (Without pick-and-place tape)
(22) : Embossed tape packaging (With pick-and-place tape)
Note 1 : There is no polarity in terms of board mounting for this product.
Note 2 : The coplanarity of this product's SMT leads is 0.1 mm or less.
Note 3 : Please order embossed tape packaged items by the reel. (1,000 pcs/reel)
BRecommended Land Pattern Dimensions (Metal Mask Dimensions)
Recommended metal mask thickness: 0.15 mm
ꢀ %#&
9 ꢀ%
ꢀ%
:
"%#&
¤%#%*
¤%#%*
8
6
%#*¤%#%(
'
¢%#. ¤%#%*
'
¢&¤%#%*
%#(¤%#%(ꢁAVcYꢂ
&#+*¤%#%*
%#'*¤%#%(ꢁBZiVaꢀbVh`ꢂ
1
2
Note
The cross-hatched area
and thus care should be taken that the pattern does not extend beyond the SMT land width.
Not required in products without guideposts.
inside the SMT land may come into contact with the connector contacts
14
FX11 Series●0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
BEmbossed Carrier Tape Dimensions
Unit : mm
Insertion Connector
FX11L #-60P/6-SV
FX11L #-80P/8-SV
FX11L #-100P/10 -SV
FX11L #-120P/12 -SV
FX11L #-68P-SV
A
B
C
D
E
F
●Header
ꢁ
ꢂ
ꢁ
ꢂ
%#.
;
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
&'¤%#&
'¤%#& )¤%#&
%#&
ꢀ%
ꢁ
ꢂ
%#)
¢&#*
1.98
FX11L #-92P-SV
FX11L #-116P-SV
FX11L #-140P-SV
FX11#-60P/6-SV
FX11#-80P/8-SV
FX11#-100P/10-SV
FX11#-80P-SV
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64 2.48
20.2 40.4 44 45.5 50.5
20.2 40.4 44 45.5 50.5
FX11#-100P-SV
FX11#-60P/6-SV0.5
FX11#-80P/8-SV0.5
FX11#-100P/10-SV0.5
FX11#-80P-SV0.5
FX11#-100P-SV0.5
JcgZZa^c\ꢀY^gZXi^dc
26.2 52.4 56
59
64 2.98
20.2 40.4 44 45.5 50.5
%#%*
ꢀ%
G%#,*
Note 1 : There is no polarity in terms of embossed tape packaging
for this product.
Note 2 : Left figure is representative of products with ground plates.
●Receptacle
Unit : mm
&'¤%#&
ꢁ;ꢂ
ꢁ%#.ꢂ
Insertion Connector
FX11L #-60S/6-SV
FX11L #-80S/8-SV
FX11L #-100S/10 -SV
FX11L #-120S/12 -SV
FX11L #-68S-SV
FX11L #-92S-SV
FX11L #-116S-SV
FX11L #-140S-SV
FX11#-60S/6-SV
FX11#-80S/8-SV
FX11#-100S/10-SV
FX11#-80S -SV
A
B
C
D
E
F
%#&
ꢀ%
'¤%#& )¤%#&
ꢁ%#)ꢂ
¢&#*
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64
2
20.2 40.4 44 45.5 50.5
26.2 52.4 56 59 64 2.45
20.2 40.4 44 45.5 50.5
FX11# -100S-SV
JcgZZa^c\ꢀY^gZXi^dc
Note 1 : There is no polarity in terms of embossed tape packaging
for this product.
Note 2 : Left figure is representative of products with ground plates.
%#%*
G%#,*
ꢀ%
●Reel Dimensions
¢&(¤%#*
ꢁ9ꢂ
ꢁ:ꢂ
15
相关型号：
FX11B-80P-SV0.5(22)
Board Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FX11B-80P/8-SV(91)
Board Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FX11B-80P/8-SV0.5(71)
Board Stacking Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator
HRS
FX11B-80S-SV
Board Stacking Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle
HRS
FX11B-80S-SV(21)
Board Stacking Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle
HRS
FX11B-80S-SV(22)
Board Stacking Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle
HRS
FX11B-80S/8-SV(92)
Board Connector, 80 Contact(s), 2 Row(s), Straight, 0.02 inch Pitch, Surface Mount Terminal, Locking, Beige Insulator, Receptacle
HRS
FX11LA-060P/06-SV71
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
HRS
FX11LA-080P/08-SV71
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm Board-to-Board Connections
HRS
FX11LA-100P/10-SV
Board Stacking Connector, 110 Contact(s), 2 Row(s), Male, Straight, 0.02 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle
HRS
FX11LA-100P/10-SV(21)
Board Stacking Connector, 110 Contact(s), 2 Row(s), Male, Straight, 0.02 inch Pitch, Surface Mount Terminal, Beige Insulator, Receptacle
HRS
©2020 ICPDF网 联系我们和版权申明