HR08D-12WPM-10S [HRS]

Small, Waterproof, Push-On Bayonet Lock Connectors;


型号：	HR08D-12WPM-10S
厂家：	HRS
描述：	Small, Waterproof, Push-On Bayonet Lock Connectors
文件：	总6页 (文件大小：497K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Small, Waterproof, Push-On Bayonet Lock Connectors

HR08D Series

Push-On Bayonet Lock

⬆

Mating is completed simply

by pushing the plug onto the

receptacle.

To unmate this connector,

rotate the locking collar to

release the lock, then pull

them apart.

Features

1. Simplified mating operations

■

Fig.q

•To mate the connector, simply push it onto the

receptacle. To unmate, rotate the locking collar

and pull the plug back from the receptacle.

(Fig. q)

Cable exit directions

•Simplified mating is enabled by the alignment

markings

•Mating guide keys are provided at 3 points to

prevent contact damage. They also provide the

ability to blind mate these connectors when needed.

Plug connector does not damage the receptacle

contacts.

2. Waterproof structure

Supports IP67 and IP68 ratings while in the mated

condition. (Ratings explained below*)

*IP67: Submerged in 1 m for 30 minutes

*IP68: Submerged in 2 m for 14 days

Fig.w

3. Adjustable cable direction

The right angle plug can be adjusted to mount in

any of the 8 different directions (adjustable in 45°

increments). (Fig. w)

4. Variations available

Items

No. of Contacts

2 or 10 positions available

Connector Type

Straight Plug, Right Angle Plug, Receptacle (10 pos. only)

Plug Termination

Receptacle Termination

Cord Tube Material

Crimp, solder

Solder

Plastic, metal

Cable Diameter Range

(Reference)

5.7 to 6.5

（Ø

6.5 to 7.3

8.0 to 9.0

）（Ø

）

In cases where the application will demand a high level of reliability, such as automotive,

please contact a company representative for further information.

2018.7

②

HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors

Product Speciﬁcations

■

Rated Current

Rated Voltage

Operating Temperature Range -20ç to +85ç

Storage Temperature Range -10ç to +60ç

Ratings

AC200V, DC250V

Items

Speciﬁcations

Conditions

1. Contact Resistance

20mø or below

Measured with DC 1A

2.Insulation Resistance Minimum of 1,000Mø

Measured with DC 500V

3. Withstanding Voltage No ﬂashover or breakdown

10 pos. AC 900V for 1 minute 2 pos. AC 1,500V for 1 minute

Tested in 3 directions with 10 to 500Hz /cycle, total

vibration width of 0.75mm, and 98m/s², 3 hours each.

Tested in 3 directions with the acceleration of 490m/s²,

and a duration of 11ms, 3 times each

No electrical discontinuity of 10µs or

greater

4. Vibration Resistance

No electrical discontinuity of 10µs or

greater

5. Shock

6. Durability

Contact Resistance : Maximum of 30m

500 mating cycles

Left at 55ç : 30 minutes

Ordinary temperature : 2 to 3

⇒

7. Temperature Cycles

Insulation Resistance : Minimum of 500Mø minutes

85ç : 30 minutes

Ordinary temperature : 2 to

⇒

3 minutes, 2 to 3 minutes, Total of 5 cycles

Left at temperature 71ç and humidity 95% for 336 hours.

Left at the temperature of 71ç and 95% humidity for 336

hours.

Insulation resistance

8. Humidity Resistance Minimum of 50M (high humidity)

Minimum of 500M (dry)

Should be no water leakage inside the Left submerged in water at the depth of 1m, for 0.5 hours,

connector in the mated condition.

9. Waterproof Structure

Materials / Finish

■

●Plug

Component

Outer Shell

Insulator

Female Contact

O Ring, Gasket

Materials

Finish

Nickel under plating

----------------------

Gold plating

Remarks

----------------------

UL94V-0

----------------------

Zinc Alloy, aluminum alloy and polyamide resin (black)

PPS resin (black)

Phosphorous bronze

NBR, Nitrile hydride rubber

----------------------

●Receptacle

Component

Outer Shell

Insulator

Male Contact 10 position

O Ring

Materials

Zinc alloy

PPS resin (black)

Brass

Finish

Nickel under plating

----------------------

Gold plating

Remarks

----------------------

UL94V-0

----------------------

NBR

----------------------

Product Number Structure

■

Refer to the chart below when determining the product specifications from the product number.

Please select from the product numbers listed in this catalog when placing orders.

●Plug

● Receptacle

HR08D 12 WP A - 10 S (**)

HR08D 12 WR - 10 P (**)

❶

❷

❸

❹

❺

❻

❼

❶

❷

❸

❹

❺

❻

Model Name : HR08D series

Shell Size : Diameter (mm) of the mating interface of the plug

Shell Type

WP : Straight plug, WLP: Right angle plug

Cord Tube and Cable Range Type

A : Material of cord tube : Metal, with cable dia. range of ( 5.7 to 6.5)

B : Material of cord tube : Metal, with cable dia. range of ( 6.5 to 7.3)

M : Material of cord tube : Plastic, with cable dia. range of ( 5.7 to 6.5)

❶

❷

❸

Model Name : HR08D series

❶

❷

❸

❹

❺

Shell Size : Diameter (mm) of the mating interface of the plug

Shell Type WR Receptacle

ꢀ

：

Number of Contacts : Contacts available (10 only)

Contact Shape P : Male contact for solder termination

❹

❻ Other specifications :

A two-digit character is added to indicate other

specifications as needed.

N : Material of cord tube : Plastic, with cable dia. range of ( 6.5 to 7.3)

K : Material of cord tube : Metal, with cable dia. range of ( 8.0 to 9.0)

Number of Contacts : Contacts available (2 or 10)

Contact Shape

S : Female contact for solder termination

SC : Female contact for crimping termination

❼ Other specifications :

❺

❻

●Crimp contact

HR34B - SC1 - 2 1 1

❶

❷

❸

❹

❺

A two-digit character is added to indicate other

specifications as needed.

Model Name : HR34B series (Shares the same contacts

as the HR34B series)

❶

Contact Type SC1 : Female contact

Contact Shape 1 : Single contact 2 : Reel contact

Barrel Shape : 1 : 20 to 25 AWG

❷

❸

❹

❺

Plating Type 1 : Gold plating

HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors

Straight plug

■

●Regular version ( Cord tube material : Plastic)

49.1

(example)

◆Solder termination version

Applicable cable

diameter range

(Reference)

Contact solder cup inner

diameter

Part No.

HRS No.

HR08D-12WPM-10S(31)

HR08D-12WPN-10S(31)

HR08D-12WPM-2S(31)

HR08D-12WPN-2S(31)

108-0274-5 31

108-0275-8 31

108-0272-0 31

108-0266-7 31

7.4

8.5

7.4

8.5

5.7 to 6.5

6.5 to 7.3

5.7 to 6.5

6.5 to 7.3

（Ø

）

1.8

◆ Crimp termination version

Applicable cable

diameter range

(Reference)

Part No.

HRS No.

HR08D-12WPM-10SC(31)

HR08D-12WPN-10SC(31)

108-0268-2 31

108-0269-5 31

7.4

8.5

5.7 to 6.5

（Ø

）

6.5 to 7.3

●Robust version (Cord tube material: Metal)

◆Solder termination version

Applicable cable

diameter range

(Reference)

Contact solder cup inner

diameter

Part No.

HRS No.

HR08D-12WPA-10S(31)

HR08D-12WPB-10S(31)

HR08D-12WPK-10S(31)

HR08D-12WPA-2S(31)

HR08D-12WPB-2S(31)

HR08D-12WPK-2S(31)

108-0219-7 31

108-0231-2 31

108-0262-6 31

108-0279-9 31

108-0280-8 31

108-0281-0 31

7.4

8.5

9.5

7.4

8.5

9.5

5.7 to 6.5

6.5 to 7.3

8.0 to 9.0

5.7 to 6.5

6.5 to 7.3

8.0 to 9.0

（Ø

）

1.8

◆Crimp termination version

Applicable cable

diameter range

(Reference)

Part No.

HRS No.

HR08D-12WPA-10SC(31)

HR08D-12WPB-10SC(31)

HR08D-12WPK-10SC(31)

108-0220-6 31

108-0232-5 31

108-0263-9 31

7.4

8.5

9.5

5.7 to 6.5

6.5 to 7.3

8.0 to 9.0

（Ø

）

HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors

Right angle plug

■

●Regular version ( Cord tube material : Plastic)

(example)

◆Solder termination version

Applicable cable

diameter range

(Reference)

Contact solder cup

inner diameter

Part No.

HRS No.

HR08D-12WLPM-10S(31)

HR08D-12WLPN-10S(31)

HR08D-12WLPM-2S(31)

HR08D-12WLPN-2S(31)

108-0276-0 31

108-0277-3 31

108-0273-2 31

108-0267-0 31

Ø7.4

Ø8.5

Ø7.4

Ø8.5

(Ø5.7 to 6.5)

(Ø6.5 to 7.3)

(Ø5.7 to 6.5)

(Ø6.5 to 7.3)

Ø1

30.85

Ø1.8

◆Crimp termination version

Applicable cable

diameter range

(Reference)

Part No.

HRS No.

HR08D-12WLPM-10SC(31) 108-0270-4 31

HR08D-12WLPN-10SC(31) 108-0271-7 31

Ø7.4

Ø8.5

(Ø5.7 to 6.5)

(Ø6.5 to 7.3)

30.85

●Robust version (Cord tube material: Metal)

◆Solder termination version

Applicable cable

diameter range

(Reference)

Contact solder cup

inner diameter

Part No.

HRS No.

HR08D-12WLPA-10S(31)

HR08D-12WLPB-10S(31)

HR08D-12WLPK-10S(31)

HR08D-12WLPA-2S(31)

HR08D-12WLPB-2S(31)

HR08D-12WLPK-2S(31)

108-0221-9 31

108-0233-8 31

108-0264-1 31

108-0282-3 31

108-0283-6 31

108-0284-9 31

Ø7.4

Ø8.5

Ø9.5

Ø7.4

Ø8.5

Ø9.5

(Ø5.7 to 6.5)

(Ø6.5 to 7.3)

(Ø8.0 to 9.0)

(Ø5.7 to 6.5)

(Ø6.5 to 7.3)

(Ø8.0 to 9.0)

30.5

31.5

30.5

31.5

Ø1

Ø1.8

◆Crimp termination version

Applicable cable

diameter range

(Reference)

Part No.

HRS No.

HR08D-12WLPA-10SC(31)

HR08D-12WLPB-10SC(31)

HR08D-12WLPK-10SC(31)

108-0222-1 31

108-0234-0 31

108-0265-4 31

Ø7.4

Ø8.5

Ø9.5

(Ø5.7 to 6.5)

(Ø6.5 to 7.3)

(Ø8.0 to 9.0)

30.5

31.5

HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors

Receptacle

■

◆Solder termination version

Contact solder cup inner

Part No.

HRS No.

108-0218-4 31

diameter

Ø1.1

HR08D-12WR-10P(31)

17.26

23.4

Note : The number 10 contact is connected to the outer shell, which provides the ground connection.

BPanel Mount Hole Dimensions

Dimension

HR08D-12WR-10P(31)

17.26 0.05

M3×0.5

ꢀ

0/ 0.1

ー

12.2 +0.1/0

ꢀ

16.2 +0.1/0

ꢀ

φD

φE

Crimp contact

■

●Female contact

Applicable electric

Type

Part No.

HRS No.

wires

Loose piece contact

Reel contact

HR34B-SC1-111

HR34B-SC1-211

134-0051-7

134-0050-4

20 to 25 AWG

Note : The loose piece contacts are sold in packs of 100. Reel contacts are sold in full reel quantities

of 10,000 pieces per reel.

HR08D Series●Small, Waterproof, Push-On Bayonet Lock Connectors

Plug Contact Diagram

2 position version

10 position version

3 2 1

7 6 5 4

10 9 8

Note : The numbering of the contact is from the

plug termination side.

Applicable Tools

Tools

Part No.

HT304/HR34B-1

HRS No.

150-0107-9

901-0001-0

Applicable contacts

HR34B-SC1-111 20 AWG

Applicable wire size

AWG AWG

Manual Crimping Tool

Automatic Crimping Press

Automatic Crimping

Applicator

、23

、25

CM-105C

HR34B-SC1-211

20 to 25 AWG

----------------------

AP105-HR34B-1

901-2051-2

150-0039-0

HR34B-SC1-111

HR34B-SC1-211

Contact Extraction Tool

RP6-SC-TP

Manual Crimping Tool

BAutomatic Crimping Press CM-105C Model

(applicator sold separately)

Contact Extraction Tool

Operating Precautions

1.Prior to inserting or extracting this connector, make sure that the connector is not energized and the power is in the OFF position.

2.There may be some resistance when inserting the cables into this connector, even if the cables are within the applicable cable range.

This is to be expected due to the connector’s waterproof ability. The waterproof performance and clamp force is dependant on the cable

specification. Please check the cable specifications before using as they can cause a difference in performance in the waterproof

protection and cable clamp force.

3.Please contact your local Hirose Sales Representative for any inquiries regarding the assembly procedures of this connector.

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 07/2018. Contents are subject to change without notice for the purpose of improvements.

HR08D-12WPM-10S [HRS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E