HR10A-10TR-12SC [HRS]
High performance miniature circular connectors;
| 型号： | HR10A-10TR-12SC |
| 厂家： | 
HRS |
| 描述： | High performance miniature circular connectors |
| 文件： | 总21页 (文件大小：1487K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
High performance miniature circular connectors
HR10 Series
Features
1.A simple, yet highly reliable design for
compact, high density applications
Although small in size, the HR10 series are full
featured connectors with a well integrated design.
2. Extremely easy mating/unmating
operations
Easy to operable, the single-action push-pull lock
structure allows for quick and efficient locking and
unlocking.
Product Specifications
Shell size
No. of contacts
Rated current
2A
4
5
6
7
Ratings
10
12
10
13
2A
2A
20
Shell size
7
No. of contacts
Rated voltage
4
5
6
AC150V, DC200V
AC100V, DC140V
AC100V, DC140V
Ratings
Ratings
10
12
10
13
AC100V, DC140V
AC100V, DC140V
20
Operation temperature range
Storage temperature range
-25 to +85ç
-10 to +60ç
Items
Specifications
Conditions
1. Contact resistance
10mø min.
Measured at DC 1A
2. Insulation resistance 1,000Mø min.
Measured at DC 100V
3. Withstanding voltage No flashover or dielectric breakdown.
AC 300V for one minute, 4 contacts : AC 500V for 1 minute
10 to 55Hz/cycle, amplitude : 0.75mm, 3 axis directions,
for 2 hours each
4. Vibration resistance No electrical discontinuity of 10µs or greater
Acceleration : 490m/s2, duration : 11ms 3 directions,
3 times each
5. Shock resistance
6. Mating Cycles
No electrical discontinuity of 10µs or greater
Contact resistance : 15mø min.
1,000 times
-55ç : 30minutes Normal temperature : 10 to 15 minutes
➝
➝
7. Temperature cycle
8. Humidity resistance
Insulation resistance : 1,000Mø min.
85ç : 30minutes Normal temperature :
10 to 15minutes, left for 5 cycles.
➝
5Mø min. (at high humidity)
50Mø min. (at dry)
Temperature : 40ç, relative humidity : 90 to 95%,
left for 96 hours
In cases where the application will demand a high level of reliability, such as automotive,
please contact a company representative for further information.
1
2017.12y
HR10 Series●High performance miniature circular connectors
Materials / Finish
Items
Material
Finish
Remarks
----------------
Blue, Black
Exterior
Insulator
Zinc alloy, brass
Matte finished nickel plating
----------------
Polyamide resin, PBT resin
HR10 : Gold plating
HR10A : Silver plating
Contact
Copper alloy
----------------
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
HR10A 7 P 3 P C (**)
-
-
q
w
e
r
t
y
u
qModel name : Indicates the HR10A Series. The part type is identified as follows.
HR10A : Lower cost type
HR10G : Shield type
HR10B : Coaxial contact type
wShell size : The shell size is the outer shell diameter or the mating interface end of the plug.
eShell type
P : Plug
R : Receptacle
J : Jack
rNumber of contacts
tContact form
P : Male contact
S : Female contact
yContact termination method:
None : Solder termination
C
: Crimp termination
uOther specifications : A two-digit character is added to indicate other specifications as needed.
2
HR10 Series●High performance miniature circular connectors
Diagrams of Connectors in Combination
Male Pin side
Female Pin side
(HR10 • HR10A
HR10G Type Receptacle)
(HR10 Type Plug)
(HR10 Type Jack)
(HR10A Type Plug)
(HR10A Type Jack)
(HR10B Type Receptacle)
(HR10B Type Plug)
[ ]
(HR10A- T Type Receptacle)
[ ]
(HR10A- T Type Plug)
[ ]
(HR10A- T Type Jack)
Notes
1 : When using a plug with male terminal, be sure to use a receptacle or jack fitted with female terminal.
2 : Standard finish of the terminal is gold plating for the HR10, and silver plating for the HR10A and HR10G.
Be sure to use male and female connectors of the same plating.
3
HR10 Series●High performance miniature circular connectors
HR10 type
HR10 type connectors, use a gold plated contact as the standard plating specification. Silver plating is used on the contacts
for other series such as HR10A and HR10G. To avoid mixing gold and silver contacts, please be sure to confirm the plating
specification when using HR10 type connectors with HR10A or HR10G connectors.
Plug
A Max
HR10-7P-6S(73)
(Representative example)
Unit : mm
Part No.
HR10-7P-4P(73)
HR10-7P-4S(73)
HR10-7P-6P(73)
HR10-7P-6S(73)
HR10-10P-12P(73)
HR10-10P-12S(73)
HRS No.
No. of Contacts
4
A
ØB
11
ØC
7
ØD
5.2
Weight
110-0021-6 73
110-0022-9 73
110-0023-1 73
110-0024-4 73
110-0025-7 73
110-0026-0 73
28.5
8g
6
12
32.5
14
9.5
7.2
15g
Receptacle
A
6.3
5.7
D
E(HEX)
HR10-7R-6S(73)
(Representative example)
Unit : mm
Weight
Part No.
HR10-7R-4S(73)
HR10-7R-4P(73)
HR10-7R-6S(73)
HR10-7R-6P(73)
HR10-10R-12S(73)
HR10-10R-12P(73)
HRS No.
No. of Contacts
4
A
ØB
11
ØC
D
E
110-0031-0 73
110-0032-2 73
110-0033-5 73
110-0034-8 73
110-0035-0 73
110-0036-3 73
14
8.85
M8×0.5
10
3.5g
6g
6
12
16
14
11.9
M11×0.75
13
Remarks : For mounting holes, see page 20.
4
HR10 Series●High performance miniature circular connectors
Receptacle (PCB dip type)
G
E
5.7
F
Dip post dia.
Ø0.55
C
D(HEX)
HR10-7R-6SA(73)
(Representative example)
Unit : mm
G Weight
Part No.
HRS No.
No. of Contacts
4
ØA
11
ØB
C
D
E
F
HR10-7R-4SA(73)
HR10-7R-6SA(73)
HR10-7R-6PA(73)
110-0059-9 73
110-0050-4 73
110-0061-0 73
8.85
M8×0.5
10
3g
6
6.3
0.5
15.5
HR10-10R-12SA(73) 110-0049-5 73
HR10-10R-12PA(73) 110-0055-8 73
12
14
11.9
M11×0.75
13
5g
Remarks : 1. For mounting holes, see page 20.
2. For dip post arrangement, see page 16.
Jack
A Max
5.5
HR10-7J-6S(73)
(Representative example)
Unit : mm
Weight
Part No.
HRS No.
No. of Contacts
4
A
ØB
11
ØC
ØD
5.2
HR10-7J-4S(73)
HR10-7J-4P(73)
HR10-7J-6S(73)
HR10-7J-6P(73)
HR10-10J-12S(73)
HR10-10J-12P(73)
110-0027-2 73
110-0028-5 73
110-0029-8 73
110-0030-7 73
110-0037-6 73
110-0038-9 73
28.5
8.85
7g
6
12
32.5
14
11.9
7.2
14g
5
HR10 Series●High performance miniature circular connectors
HR10A•10G Types
HR10A connectors are a lower-cost version, yet still provide a high "Value Add" while preserving the superior characteristics
of the HR10 connectors. Cable clamps are crimped using a special crimping tool, and the shells have a rubber boot which
provides a flexible design that helps to prevent cable twisting.
The HR10G connector is a shielded type connector which has an internal contacting structure between the plug shell and
receptacle shell.
Contacts in both HR10A and 10G connectors are silver plated as standard.
Plug (Solder type)
A
(Representative example)
HR10A-7P-6P(73)
Unit : mm
Part No.
HRS No.
No. of Contacts
4
A
ØB
ØC
7
ØD
5
Weight
HR10A-7P-4P(73)
HR10A-7P-4S(73)
HR10A-7P-5P(73)
HR10A-7P-5S(73)
HR10A-7P-6P(73)
HR10A-7P-6S(73)
HR10A-10P-10P(73)
HR10A-10P-10S(73)
HR10A-10P-12P(73)
HR10A-10P-12S(73)
HR10A-13P-20P(73)
HR10A-13P-20S(73)
110-0301-2 73
110-0302-5 73
110-0318-5 73
110-0319-8 73
110-0303-8 73
110-0304-0 73
110-0407-3 73
110-0408-6 73
110-0401-7 73
110-0402-0 73
110-0713-0 73
110-0716-8 73
5
35
11.5
9g
6
10
12
20
43
59
14.7
19
9.5
13
16g
37g
7
Plug(Crimp type)
A
(Representative example)
HR10A-7P-6PC(73)
Unit : mm
Weight
Part No.
HRS No.
No. of Contacts
4
A
ØB
ØC
7
ØD
5
HR10A-7P-4PC(73)
HR10A-7P-4SC(73)
HR10A-7P-6PC(73)
HR10A-7P-6SC(73)
HR10A-10P-10PC(73)
HR10A-10P-10SC(73)
HR10A-10P-12PC(73)
HR10A-10P-12SC(73)
HR10A-13P-20PC(73)
HR10A-13P-20SC(73)
110-0501-1 73
110-0502-4 73
110-0503-7 73
110-0504-0 73
110-0601-6 73
110-0602-9 73
110-0603-1 73
110-0604-4 73
110-0701-0 73
110-0702-3 73
35
11.5
9g
6
10
12
20
43
59
14.7
19
9.5
13
16g
37g
7
6
HR10 Series●High performance miniature circular connectors
A
Receptacle (Solder type)
F
5.7
D
E(HEX)
HR10A-7R-6S(73)
(Representative example)
Unit : mm
Weight Remarks
Part No.
HRS No.
No. of Contacts
A
ØB
ØC
D
E
E
HR10A-7R-4S(73)
HR10A-7R-4P(73)
HR10A-7R-5S(73)
HR10A-7R-5P(73)
HR10A-7R-6S(73)
HR10A-7R-6P(73)
HR10A-10R-10S(71)
HR10A-10R-10P(73)
HR10A-10R-12S(71)
HR10A-10R-12P(73)
HR10A-13R-20S(73)
HR10A-13R-20P(73)
HR10G-7R-4S(73)
HR10G-7R-4P(73)
HR10G-7R-6S(73)
HR10G-7R-6P(73)
HR10G-10R-10S(71)
HR10G-10R-10P(73)
HR10G-10R-12S(71)
HR10G-10R-12P(73)
110-0305-3 73
110-0306-6 73
110-0320-7 73
110-0321-0 73
110-0307-9 73
110-0308-1 73
110-0409-9 71
110-0410-8 73
110-0403-2 71
110-0404-5 73
110-0714-2 73
110-0715-5 73
110-1601-1 73
110-1602-4 73
110-1605-2 73
110-1606-5 73
110-1607-8 71
110-1608-0 73
110-1609-3 71
110-1610-2 73
4
5
6
14
11
8.85
M8×0.5
10
3g
6.3
10
12
20
4
16
14
18
11
11.9
15.4
8.85
M11×0.75
M14×0.75
M8×0.5
13
5g
8g
19.2
20.2
17 9.3
14
16
10
6.3
13
3g
6
Shield type
5g
10
12
14
11.9
M11×0.75
Remarks : For mounting holes, see page 20.
Receptacle (Crimp type)
F
E
C
HR10A-10R-12SC(71)
D(HEX)
(Representative example)
Unit : mm
Part No.
HRS No.
No. of Contacts ØA
4
ØB
C
D
E
F
12
12.2
12
12.2
12
12.2
12
12.2
Weight Remarks
HR10A-7R-4SC(73)
HR10A-7R-4PC(73)
HR10A-7R-6SC(73)
HR10A-7R-6PC(73)
HR10A-10R-10SC(71)
HR10A-10R-10PC(71)
HR10A-10R-12SC(71)
HR10A-10R-12PC(71)
HR10A-13R-20SC(73)
HR10A-13R-20PC(73)
HR10G-7R-4SC(73)
HR10G-7R-4PC(73)
HR10G-7R-6SC(73)
HR10G-7R-6PC(73)
HR10G-10R-10SC(71)
HR10G-10R-10PC(71)
HR10G-10R-12SC(71)
HR10G-10R-12PC(71)
HR10G-13R-20SC(73)
HR10G-13R-20PC(73)
110-0506-5 73
110-0505-2 73
110-0508-0 73
110-0507-8 73
110-0606-0 71
110-0605-7 71
110-0608-5 71
110-0607-2 71
110-0703-6 73
110-0704-9 73
110-1701-6 73
110-1702-9 73
110-1705-7 73
110-1706-0 73
110-1707-2 71
110-1708-5 71
110-1709-8 71
110-1710-7 71
110-1711-0 73
110-1712-2 73
11 8.85
M8×0.5
10
3g
6
6.3
10
12
20
4
14 11.9
18 15.4
11 8.85
M11×0.75
M14×0.75
M8×0.5
13
5g
8g
3g
17 9.3
15
12
12.2
12
12.2
12
12.2
12
12.2
10
6.3
13
6
10
12
20
Shield type
5g
14 11.9
18 15.4
M11×0.75
M14×0.75
17 9.3
15
8g
Remarks : For mounting holes, see page 20.
7
HR10 Series●High performance miniature circular connectors
Receptacle (Dip type)
G
E
5.7
F
Dip post dia.
0.2∞0.5
C
(Representative example)
D(HEX)
HR10A-7R-6SB(73)
Unit : mm
No. of
Contacts
Part No.
HRS No.
ØA
11
ØB
C
D
E
F
G
Weight Remarks
HR10A-7R-4SB(73)
HR10A-7R-4PB(73)
HR10A-7R-5SB(73)
HR10A-7R-6SB(73)
HR10A-7R-6PB(73)
HR10A-10R-10SB(71)
HR10A-10R-10PB(71)
HR10A-10R-12SB(71)
HR10A-10R-12PB(71)
HR10A-13R-20SB(73)
HR10A-13R-20PB(73)
HR10G-7R-4SB(73)
HR10G-7R-4PB(73)
HR10G-7R-6SB(73)
HR10G-7R-6PB(73)
HR10G-10R-10SB(71)
HR10G-10R-10PB(71)
HR10G-10R-12SB(71)
HR10G-10R-12PB(71)
HR10G-13R-20SB(73)
HR10G-13R-20PB(73)
110-0314-4 73
110-0315-7 73
110-0322-2 73
110-0316-0 73
110-0317-2 73
110-0413-6 71
110-0414-9 71
110-0415-1 71
110-0416-4 71
110-0707-7 73
110-0708-0 73
110-1801-0 73
110-1802-3 73
110-1805-1 73
110-1806-4 73
110-1807-7 71
110-1808-0 71
110-1809-2 71
110-1810-1 71
110-1811-4 73
110-1812-7 73
4
5
6
3g
8.85
M8×0.5
10
6.3
0.5 15.6
10
12
20
4
5g
8g
14
18
11
11.9
15.4
8.85
M11×0.75
M14×0.75
M8×0.5
13
17
10
9.3
6.3
9.3
0
17.8
3g
6
0.5 15.6
Shield
10
12
20
type
14
18
11.9
15.4
M11×0.75
M14×0.75
13
17
5g
0
17.8
8g
Remarks : 1. For mounting holes, see page 20.
2. For dip post arrangement, see page 16.
Dust cap
ØC
ØD
HR10-7R-C
ØA
(Representative example)
Unit : mm
Part No.
HR10-7R-C
HRS No.
ØA
11
B
7
ØC
ØD
ØE
13
15
19
110-0058-6 00
110-0052-0 00
110-0452-8 00
8
11.2
14.1
18.1
HR10-10R-C
14
8.5
11.5
10.8
14
HR10A-13R-C
17.5
8
HR10 Series●High performance miniature circular connectors
Jack (Solder type)
A
5.5
HR10A-7J-6S(73)
(Representative example)
Unit : mm
Part No.
HRS No.
No. of Contacts
4
A
ØB
ØC
ØD
Weight
HR10A-7J-4S(73)
HR10A-7J-4P(73)
HR10A-7J-6S(73)
HR10A-7J-6P(73)
HR10A-10J-10S(73)
HR10A-10J-10P(73)
HR10A-10J-12S(73)
HR10A-10J-12P(73)
110-0309-4 73
110-0310-3 73
110-0311-6 73
110-0312-9 73
110-0411-0 73
110-0412-3 73
110-0405-8 73
110-0406-0 73
35.3
11
8.85
5
9g
6
10
12
43.5
14
11.9
7
16g
Jack (Crimp type)
A
D
HR10A-7J-6SC(73)
(Representative example)
Unit : mm
Weight
Part No.
HRS No.
No. of Contacts
A
ØB
11
ØC
D
ØE
5
HR10A-7J-4SC(73)
HR10A-7J-6SC(73)
HR10A-10J-10SC(73)
HR10A-10J-12SC(73)
HR10A-13J-20SC(73)
HR10A-13J-20PC(73)
110-0510-2 73
110-0512-8 73
110-0610-7 73
110-0612-2 73
110-0705-1 73
110-0706-4 73
4
6
35.3
8.85
9g
5.5
10
12
43.5
58.5
14
18
11.9
15.4
16g
37g
7
20
8.5
9
HR10 Series●High performance miniature circular connectors
HR10B Type Connector
The HR10B connector combines 10 signal lines and one coaxial contact in the standard number 10 shell. Performance
specifications for the coaxial contacts are on the 11 page.
Plug
A
HR10B-10P-10PC(73)
(Representative example)
Unit : mm
Part No.
HR10B-10P-10PC(73)
HR10B-10PA-10PC(73)
HRS No.
A
ØB
5
Applicable coaxial contact
110-0901-0 73
110-0906-3 73
50
43
HR10B-2.5CJ(73)
7
Receptacle
M11∞0.75
13(HEX)
6.3
12
HR10B-10R-10SC(71)
(Representative example)
Unit : mm
Part No.
HR10B-10R-10SC(71)
Remarks : For mounting holes, see page 20.
HRS No.
110-0902-2 71
Applicable coaxial contact
HR10B-2.5CP(73)
10
HR10 Series●High performance miniature circular connectors
Coaxial contacts
The coaxial contacts shown here are for use with the HR10B connector.These contacts have locking barbs and are inserted
from the rear of connector.Please use the following information to select the correct terminals.
Materials / Finish
Performance
Part
Plug shell
Jack shell
Insulator
Material
Finish
Description
Test data
50ø
Impedance
Brass
Gold plating
Insulation resistance
1000Mø or more at DC250V
Tetrafluoride resin
Phosphor bronze
Beryllium copper
Contact resistance Center 6.5mø or less and outer 4mø or less at DC1A
Male pin
Withstanding voltage
V.S.W.R
AC250V r.m.s for 1minute
1.3 or less for 0 to 1000MHz
4.9N (500gf) or more
Gold plating
Female pin
Pull force
Plug
3.6
5.2
(clamp)
18.05
7.1
HR10B-2.5CP(73)
(Representative example)
Unit : mm
Applicable connector
HR10B-10R-10SC(71)
Part No.
HRS No.
Applicable cable
HR10B-2.5CP(73)
110-0904-8 73
0.8D-QEW-CW(By Fjikura wire)
Jack
5.2
3.6
(clamp)
18.2
7.25
HR10B-2.5CJ(73)
(Representative example)
Unit : mm
Part No.
HRS No.
Applicable cable
Applicable connector
HR10B-10P-10PC(73)
HR10B-2.5CJ(73)
110-0903-5 73
0.8D-QEW-CW(By Fjikura wire)
11
HR10 Series●High performance miniature circular connectors
Cable connecting methods
HR10B-2.5CP(73)
HR10B-2.5CJ(73)
1. Cable end treatment
Fig.1
11± ±.5
1. Dimensions for cable end treatment are shown in Fig 1.
2. Termination is described below.
(1) Strip cable outer jacket as indicated.
(2) Slit outer jacket on both sides per Fig.1.
(3) Fold back outer cover.
(4) Remove insulator from cable.
1.4± ±.2
(2.5)
3.7± ±.2
Slit cable outer jaket
2 pieces (18±° reverse side)
2. Soldering male pin to cable center conductor
Fig.2
Male pin
1. Solder male pin to cable center conductor as indicated in Fig.2.
(1) Pre-solder the solder pot of pin with Ø0.5mm string solder.
(2) Male pin should fit flush against the cable insulator as
shown.
Soldering
(3) Remove any excess solder from the pin with a knife.This
surface must be smooth.
(4) A properly soldered terminal will yield 500gf when stretched.
Should fix flush
Contact fixing jig such as vise
3. Crimping cable outer conductor
Fig.3
1. Insert the cable into the connector and make sure to push it
all the way in. To confirm that the cable is fully inserted,
make sure that the depth is 1.5 0.2mm by measuring from
the end of the connector to the tip of the male contact by
using a vernier calipers or other suitable measuring device.
2. Use the HR10-TC-01 tool to crimp the metal fitting to the
cable.
15± ±0.
Clamp
Connector
Remove excess insulator material
(remaining after clamping is complated)
with a knife or aimilarobject0
12
HR10 Series●High performance miniature circular connectors
HR10A-( )T Type (Threaded Coupling Type)
HR10A-( )T connector is a new product having a threaded coupling locking mechanism. Electric parformance is same as
HR10 and HR10A push-pull locking type connectors.
Plug (Solder type)
D
HR10A-10TP-12P(73)
(Representative example)
Unit : mm
Part No.
HRS No.
No. of Contacts ØA
B
ØC
7
D
ØE
5
Remarks
HR10A-7TP-6P(73)
110-0331-3 73
110-0331-3 74
110-0432-0 73
110-0446-5 73
110-1101-9 73
110-1106-2 73
110-1015-9 73
6
12
17
M10×0.75
35
HR10A-7TP-6P(74)
Gold plating
HR10A-10TP-12P(73)
HR10A-10TPA-12S(73)
HR10A-10WTP-12P(73)
HR10A-10WTP-12S(73)
HR10A-13TPD-20P(73)
M13×0.75
43
7
12
20
9.5
13
15
20
M12×0.75
M17×1
45.8
56.5
6.5
7
*
*Waterproof plug need resin filling inside when connector assembly.
When mated, the connector against water penetration.
Plug (Crimp type)
43
HR10A-10TP-12PC(73)
(Representative example)
Unit : mm
Part No.
HRS No.
110-0455-6 73
No. of Contacts
12
HR10A-10TP-12PC(73)
13
HR10 Series●High performance miniature circular connectors
Receptacle (Solder type)
E
B
5.7
C
A
F(HEX)
HR10A-10TR-12S(73)
(Representative example)
Unit : mm
Remarks
Part No.
HRS No.
No. of Contacts
6
A
B
C
ØD
11
E
F
HR10-7TR-6S(73)
HR10A-10TR-12S(73)
110-0089-0 73
110-0453-0 73
M10×0.75
M13×0.75
M8×0.5
M11×0.75
14
10 Gold plating
6.3
12
14
16
13
HR10A-10WTR-12S(73) 110-1104-7 73
M12×0.75 6.8 M10.5×0.75
Remarks : For mounting hole, see page 15(10TR,10WTR) 20(7TR).
Receptacle (Crimp type)
B
C
E
D
HR10A-10TR-12SC(73)
(Representative example)
F(HEX)
Unit : mm
Part No.
HRS No.
HR10A-10TR-12SC(73) 110-0456-9 73
HR10A-13TR-20SC(73) 110-1002-7 73
Remarks : For mounting hole, see page 15
No. of Contacts
ØA
14
18
B
C
D
E
F
12
20
12
15
6.3
9.3
M13×0.75
M17×1
M11×0.75
M14×0.75
13
17
Receptacle (Dip type)
G
E
5.7
F
Dip post
H
C
B
D(HEX)
HR10A-10TR-12PB(73)
(Representative example)
Unit : mm
H
Part No.
HRS No.
No. of Contacts ØA
B
C
D
E
F
G
HR10A-7TR-6SA(73)
HR10A-10TR-12SB(73)
HR10A-10TR-12PB(73)
HR10A-10TR-12PE(73)
110-0330-0 73
110-0433-3 73
110-0457-1 73
110-0445-2 73
6
11 M10×0.75
M8×0.5
10
15.5 Ø0.55
15.6
6.3 0.5
M13×0.75 M11×0.75
15.5
12
14
13
14 0.2×0.5
15.6
HR10A-10WTR-12SB(73) 110-1102-1 73
HR10A-13TR-20SB(73) 110-1014-6 73
M12×0.75 M10.5×0.75
6.8
0
20
18
M17×1
M14×0.75
17 9.3
17.8
Remarks : 1.For mounting holes, see page 15. However, 7TR size shell be referred to page 20 on the shell size 7.
2.For dip post arrangement, see page 16.
14
HR10 Series●High performance miniature circular connectors
Jack (Solder type)
B
D
HR10A-10TJ-12S(73)
(Representative example)
Unit : mm
Part No.
HRS No.
No. of Contacts
12
ØA
14.7
14
B
ØC
D
Remarks
HR10A-10TJ-12S(73)
HR10A-10TJ-12P(73)
HR10A-10WTJ-12S(73)
110-0436-1 73
110-0459-7 73
110-1103-4 73
41.3
46.5
7
M13×0.75
M12×0.75
6.5
*
*Waterproof jack need resin filling inside when connector assembly.
When mated, the connector against water penetration.
Panel mounting hole dimensions (Screw coupling)
The mounting hole dimensions shown below are for connectors to be tightened by a hexagonal nut from the back of the
panel. The dimensions below apply only to the HR10A-( )T and not the 7TR. For the dimensions of connectors of other
types, see page 20.
1.6+0.1
0
Ø10.6+0.1
0
TypeHR10A-10TR
(Panel thickness 1 to 2mm)
Type HR10A-10WTR
Type HR10A-13TR
(Panel thickness 1 to 2mm)
(Panel thickness 1 to 1.5mm)
15
HR10 Series●High performance miniature circular connectors
Contact
Male contact
Unit : mm
Applicable
cable
1.2
Type
Part No.
HRS No. Type of plating
A
A
HR10-PC-111 110-0515 6 Partial gold plating
Loose
contact
HR10-PC-112 110-0513 0
Silver plating
26 to 30
AWG
10
HR10-PC-211 110-0516 9 Partial gold plating
Reel
contact
HR10-PC-212 110-0514 3
Silver plating
Remarks : 1. Use cables with a coating outside diameter of 1mm or less.
2. Loose piece terminal are available in packs. Each pack
contains 100 terminals. Strip terminals are available in
reels. Each reel contains 10,000 terminals.
Female contact
Unit : mm
Applicable
cable
1.2
A
A
Type
Part No.
HRS No. Type of plating
HR12-SC-111 112-0410 0 Partial gold plating
Loose
contact
HR12-SC-112 112-0411 3
Silver plating
26 to 30
AWG
10
HR12-SC-211 112-0407 6 Partial gold plating
Reel
contact
HR12-SC-212 112-0408 9
Silver plating
Remarks : 1. Use cables with a coating outside diameter of 1mm or less.
2. Loose piece terminal are available in packs. Each pack
contains 100 terminals. Strip terminals are available in
reels. Each reel contains 10,000 terminals.
Receptacle dip post arrangement dimensions
＋0.1
Ø0.8
ꢀ0
＋0.1
ꢀ0
(4 Places)
Ø0.8
(6 Places)
＋0.1
ꢀ0
6
1
Ø0.8
4
3
1
＋0.1
ꢀ0
Ø0.8
(12 Places)
5
2
＋0.1
Ø0.8
ꢀ0
(10 Places)
2.38
0.95
2.38
0.95
2
4
3
(20 Places)
1.13
1.13
0.9
1.8
0.9
1.8
1
6
2
7
3
8
4
9
8
1
9
1
7-size 4 cores
5
10
8
2
3
7-size 6 cores
10
9
10
2
3
7
6
7
12 11
5
11 12 13 14 15 16
17 18 19 20
＋0.1
Ø0.8
ꢀ0
4
4
5
6
1
5
(5 Places)
1
2.55
1
2.55
1.77
2.71
1.77
2.71
0.8
0.8
4
2
3
2.4
4
2.4
4
10-size 10 cores
10-size 12 cores
1.8 1.8
7-size 5 cores
13-size 20 cores
Remarks : 1.The above figures are views from the mating side and pin inserts from the wiring-connection side.
2.Dimensional tolerance of 0.05 is recommended for the board arrangement.
16
HR10 Series●High performance miniature circular connectors
Tools
Type
Item
Part No.
HRS No.
Applicable terminal
HR10-PC-112
Applicable cable
26 to 30AWG
Manual
Manual crimping tool
HT802/HR12-SC-1
150-0400-3
HR12-SC-112
Automatic crimping
machine body
CM-105C
901-0001-0
901-2015-9
_______
_______
HR10-PC-211
212
Automatic
Applicator
AP105-HR12-1
26 to 30AWG
HR12-SC-211
212
(HR10B-2.5CP(73),
HR10B-2.5CJ(73))
HR10-TC-01
HR10A-TC-02
HR12-SC-TP
150-0036-2
150-0041-2
150-0050-3
Cable crimping tool
_______
Ø5, Ø7
HR12-SC-112
HR12-SC-212
HR10-PC-112
Extractor
RP6-SC-TP
HR10B-TP
150-0039-0
150-0061-0
_______
HR10-PC-212
HR10B-2.5CP(73)
HR10B-2.5CJ(73)
(HT802/HR12-SC-1)
Hand Crimp Tool
(HR12-SC-TP)
(RP6-SC-TP)
Extraction Tool
(HR10A-TC-02)
Hand Cable Crimp Tool
Auto Crimp Tool CM-105C
(HR10B-TP)
Coaxial Contact Removal Tool
17
HR10 Series●High performance miniature circular connectors
How to use a connector
1.Inserting
2.Withdrawing
Panel
Panel
Plug connection sleeve
Receptacle
Plug
Cable
Cable
B
A
Panel
Panel
Receptacle
Plug connection sleeve
Plug
Cable
Cable
A
B
Hold the plug at point A, align the plug guide with the
receptacle guide, and push the plug straight.
The plug will mate with the receptacle smoothly.
Hold the plug connection sleeve B and pull the sleeve
straight. The plug will come off easily.
Connecting tools
When terminating the wires, use the jigs noted below for easy assembly / disassembly of the connector parts.
HR10-10P-T02
HR10-10J-T04
Part No.
HRS No.
150-0009-0
150-0010-9
150-0011-1
150-0012-4
150-0059-8
150-0060-7
Applicable connector
HR10-7P-T01
HR10-10P-T02
HR10-7J-T03
HR10-10J-T04
HR10-13P-T05
HR10-13J-T06
HR10-7P
HR10-10P
HR10-7J
HR10-10J
HR10-13P
HR10-13J
18
HR10 Series●High performance miniature circular connectors
Cable assembly procedure on plug side
This applies also to the jack side assembly procedure.
No special procedure is given here for the receptacle side because no special procedure is necessary.
P shell unit
Plug body
Clamp washer
Bifurcated part
Tightener
Cable
Face A
Face B
About 2
C
Spanner jaw distance
Spanner jaw distance
Cord bushing
Cable
P shell unit
Clamp
Plug body
Ａ
Boss
Set screw
2 or more
About 2 for solder type
0
2-0.5 for crimp type
Ｄ
Table 2 spanner jaw distance Table 3 cable end processing dimensions
Table 1
Size
7
HR10 HR10A
Dimension D for HR10A
Solder type Crimp type
Size
7
Tightening force
Dimension C
for HR10
Size
8
7.5
9.5
1 3
1.5N·m(15kg·cm)
10
1 3
11
7
5.5 or less
7 or less
____
10
10
13
15 to 20
16
2N·m(20kg·cm)
____
10
1 3
2 5
HR10 TYPE
HR10A TYPE
1
2
Use cables with a nominal sectional area of 0.129mm2 (26 AWG) at the finish outside diameters applicable for each size.
After processing the cable ends according to the dimensions in the above drawings, fit the parts to the cable as shown
in the drawings.
Fit the parts to the cable in the following order:
tightener, clamp washer, and plug body.
Fit the parts to the cable in the following order:
cord bushing and plug body.
(solder type)
Insert the P shell unit into the assembly tool stand and solder it.
(crimp type)
3
After crimping the appropriate crimp terminal to the cable core, insert the crimp terminal into the terminal hole in the P
shell unit.
Assemble the connector in the following steps.
1. Screw the plug body into the thread in the P shell unit
with the tightening force shown in Table 1 using a
torque wrench with a fixed torque.
Before tightening the plug body,slacken part C so that
no load is applied to the soldered wires.
2. Apply the clamp washer to the bifurcated part of the
plug body, and then tighten the tightener until surface
B touches the plug body surface A.
Note : In order to prevent looseing, please apply an
adhesive at the thread of plug body.
1. Fix by caulking the clamp accompanying the cable
with the cable crimping tool(HR10A-TC-02)
2. Screw the plug body into the thread in the P shell until
with a tightening force shown in Table 1 using a torque
wrench with a fixed torque. Before tightening the plug
body, slacken the part D so that no load is applied to
the soldered wires.
3. Tighten the set screw so that the tip of the screw
presses one of the two bosses on the clamp.
Fix the set screw with a tightening torque of 0.3N
(3kg·cm).
4
5
4. Attach the cord bushing to the plug body.
Note : In order to prevent looseing, please apply an
adhesive at the thread of plug body.
This completes the work.
For any question on using the plugs, contact our sales or engineering department.
19
HR10 Series●High performance miniature circular connectors
Recommended Mounting Hole
Mounting hole dimension shown here is tight by hexagon nut from back side.
A
Shell size
7 size
10 size
13 size
Map mark
A
1.6+0.1
2.6 +0.1
0
0
B
5.1+0.1
6.6 +0.1
8.6 +0.1
0
0
0
C
8.1+0.1
11.1+0.1
14.1 +0.1
0
0
0
Panel thickness
0.7 to 2
0.8 to 1.5
Contact Arrangement
Shell size
7 size
10 size
Contact arrangement
No. of contacts
4
5
6
10
12
Withstanding voltage AC500V for a minute
Current rating
AC300V for a minute
2A
Insulation resistance
MIN 1,000Mø
MAX 10mø
Ø0.8
Contact resistance
Solder pot inside dia.
Shell size
10 size
13 size
Contact arrangement
No. of contacts
Withstanding voltage
Current rating
10+coaxial contact
20
AC300V for a minute
2A
Insulation resistance
Contact resistance
Solder pot inside dia.
MIN 1,000Mø
MAX 30mø
____
MAX 10mø
Ø0.8
Notes 1. The contact arrangement shown here is the mating surface of socket insert assembled.
2. The withstanding voltage shown here is test voltage value.
3. The isulation resistance value is measured at DC100V.
4. The contact resistance value is measured at DC1A.
20
HR10 Series●High performance miniature circular connectors
Precautions
1.Switch off the power of the circuit before disconnecting or plugging-in the connector.
2.Use a connector with socket contacts at the power side of the circuit.
3.Make sure that the coupling is in completely locked position.
4.Cable clamping, cable rotation, and other forces may vary with the cable construction. Please make sure that your cable is
suitable for use with these connectors before usage and production.
5.This product series uses silver plated contacts. Silver reacts easily to exposure to sulfur gas so the below conditions may
cause tarnishing.
ꢀ・Dusty environments
ꢀ・Area with a high concentration area of gases such as sulfur dioxide gas, hydrogen sulfide gas, nitrogen dioxide gas
and so on.
Example; In close proximity to factory exhaust, automotive emissions, etc.
ꢀ・Close to heaters, or in other areas marked by extreme temperature differences or high humidity.
ꢀ・Close to rubber products includes rubber adhesives.
The Electrical connection is not affected by tarnishing on a silver surface due to the wiping effect of the contact pins.
Storage
Packing state; Packed in original packing or equivalent container
Temperature -10 to +60
ç
Humidity 85% Max
(It is recommended that the product be stored in an area of normal level of temperature and humidity, and free of any
temperature fluctuation)
Please use this products within 6 months of delivery.
(After 6 month, please check the solderbility before use)
“Storage” means long-term storage of the unused products in sealed packaging, prior to assembly to PCB.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 12/2017. Contents are subject to change without notice for the purpose of improvements.
21
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明