HR30-8J-12SC(71) [HRS]

Circular Connector, 12 Contact(s), Female, Crimp Terminal, Jack, ROHS COMPLIANT;


型号：	HR30-8J-12SC(71)
厂家：	HRS
描述：	Circular Connector, 12 Contact(s), Female, Crimp Terminal, Jack, ROHS COMPLIANT 连接器
文件：	总16页 (文件大小：826K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Miniature Waterproof Plastic Connectors

HR30 Series

Mated dimensions

32.3

3 and 6 pos.

42.1

10 and 12 pos.

Fig.1

Lock/release operation

Features

1. Small-size with low profile

3, 6 contacts: Maximum outer diameter Ø12.6mm

Mated length 32.3mm (from the panel

surface)

Push-pull- single action lock

10, 12 contacts: Maximum outer diameter Ø15.5mm

Mated length 42.1mm (from the

panel surface)

These small, compact connectors offer unique

features available only from Hirose.

Fig.2

2. Waterproof construction

IP67 and 68 waterproof construction in the mated state

IP67: Left submerged in water at a depth of 1m for 30 minutes

IP68: Left submerged in water at a depth of 2m for 14 days

Alignment marks

3. Push/pull lock

Push-pull locking collar

Waterproof connectors feature an easy to operate

push/pull locks developed with our exclusive

technology.

4. Light weight

3 and 6 contacts: 6g (plug + receptacle)

10 and 12 contacts: 9g (plug + receptacle)

5. Clamp structure

Our proprietary clamping method allows clamping

the cable by simply tightening the cord ring.

6. Easy mating operation

The plug can be securely locked while holding it in

your hand while mating. (Fig.2)

Polarized interface

Fig.3

7. Mis-insertion prevention

Mating portions are polarized to avoid improper

mating and connector damage.

8. Mating mark

Both the plug and the receptacle feature a white

index mark on them which is used to quickly align

the two interfaces for proper mating.(Fig.3)

9. Complies with the RoHS requirements

In consideration of environmental issues, we use

only materials that comply with the RoHS Directive.

2015.8e

HR30 Series●Miniature Waterproof Plastic Connectors

Product Speciﬁcations

5A (3 pos.)

2A (6,10,12 pos.)

Current rating

Operation Temperature Range -25ç to +85ç

Ratings

100V AC,140V DC(3,6 pos.)

30V AC,42V DC(10,12 pos.)

Voltage rating

StorageTemperature Range

Conditions

-10ç to +60ç

Characteristic

Speciﬁcation

5mø max. (3 pos.)

15mø max. (Solder type: 6, 10, and 12 pos.)

30mø max. (Through hole type: 6 and 12 pos.)

1.Contact

resistance

1A DC

2.Insulation

resistance

3.Withstanding

voltage

1000Mø min.

100V DC

No ﬂashover or insulation breakdown

300V AC / one minute

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

1 cycle= 5min, 10 cycles in each of the 3 directions.

4.Vibration

No electrical discontinuity of 10µs or more

Contact resistance 10mø min.(3 pos.)

Contact resistance 30mø min. (Solder type: 6, 10, and 12 pos.)

Contact resistance 100mø min. (Through hole type: 6 and 12 pos.)

5.Durability

(mating/un-mating)

1000 cycles

(-55ç: 30 minutes Room temperature: 10 to 15

→

6.Temperature

cycle

Insulation resistance 100Mø min.

minutes +85ç: 30 minutes Room temperature:

→

10 to 15 minutes) for 5 cycles

Insulation resistance

7.Humidity

resistance

96 hours at temperature of 40ç and humidity of

90% to 95%

10Mø min. (when humidity high)

100Mø min. (when dry)

8.Waterproof

performance

While mated with corresponding or protective cap

submerged at depth of 1m for half hour.

No water penetration inside.

Material / Finish

Assembly

Component

Material

Finish

Remarks

UL94V-0

----------

PPS

PBT

Black

Insulator

Black

Polyacetal

Natural

Silicone rubber, chloroprene

rubber

Brass, phosphor bronze,

Copper compound metal

Plug

Gasket

Red/Black

----------

Contacts

Gold plated

Spring

Stainless steel

PPS

----------

UL94V-0

----------

Insulator

Gasket

Black

Chloroprene rubber

Brass, phosphor bronze,

Copper compound metal

Receptacles

Contacts

Gold plated

----------

Hexagonal nut

Washer

Zinc alloy

Chromate

----------

Phosphor bronze

Nickel plated

Crimp contact

(male/female)

Contacts

Phosphor bronze

Selective gold plated

----------

Product Number Structure

HR30 - 6 P A - 6 S C (

* *

)

w e r

t y u

t Number of Contacts : 3, 6, 10 and 12

q Model name

w Shell size

e Connector type : P : Plug

: HR30

Outside diameter/plug mating side y Contact type

: Female contact

: Male contact

u Contact wiring type

Connector type

: R : Receptacle

: J : Jack

Blank: Solder

r Variation

: Crimping

: Through hole

Blank : Standard

i Other specifications:

: Fine wire

: Over mold type

A two-digit character is added to indicate other

specifications as needed.

HR30 Series●Miniature Waterproof Plastic Connectors

Plugs

Solder Type

HR30-6P-6S (71)

A(Fully tightened)

Applicable

cable diameter

(Representative example)

Part No.

HRS No.

130-0004-1 71

130-0010-4 71

130-0009-5 71

130-0021-0 71

130-0019-9 71

130-0020-8 71

130-0027-7 71

130-0026-4 71

Applicable cable diameter range Solder pot inner diameter Weight

1.1 mm

HR30-6P-3S(71)

HR30-6P-6S(71)

HR30-6P-6P(71)

HR30-6PA-3S(71)

HR30-6PA-6S(71)

HR30-6PA-6P(71)

HR30-7P-12S(71)

HR30-8P-12P(71)

29.8

30.3

29.8

30.3

4.2 to 5

0.8 mm

12.6

1.1 mm

3.5 to 4.3

0.8 mm

39.8 15.5

6.2 to 7

0.6 mm

6.7g

Crimp Type

HR30-7P-12SC (71)

Applicable

A(Fully tightened)

cable diameter

(Representative example)

Shown with contacts installed.

Part No.

HRS No.

Applicable cable diameter range

6.2 to 7

Crimp contact

HR30-SC-211

HR30-PC-211

Weight

HR30-7P-10SC(71) 130-0013-2 71

HR30-7P-12SC(71) 130-0014-5 71

HR30-8P-12PC(71) 130-0015-8 71

39.8

HR30 Series●Miniature Waterproof Plastic Connectors

Plug for overmolds

Solder Type

HR30-6PB-6S

Part No.

HR30-6PB-3S

HR30-6PB-6S

HR30-6PB-6P

HR30-7PB-12S

HR30-8PB-12P

HRS No.

130-0034-2 00

130-0032-7 00

130-0037-0 00

130-0035-5 00

130-0030-1 00

Solder pot inner diameter Weight

1.1 mm

3.1g

22.7

23.2

25.9

12.6

5.2

0.8 mm

2.9g

4.7g

4.5g

15.5

6.4

0.6 mm

Crimp Type

HR30-8PB-12PC

25.9

Part No.

HRS No.

130-0036-8 00

130-0033-0 00

130-0031-4 00

Crimp contact

HR30-SC-211

HR30-PC-211

Weight

4.1g

HR30-7PB-10SC

HR30-7PB-12SC

HR30-8PB-12PC

4.3g

HR30 Series●Miniature Waterproof Plastic Connectors

Receptacles

Solder Type

HR30-6R-6P (71)

Gasket

E(Thread)

F(Hex nut)

(Representative example)

Part No.

HRS No.

Solder pot inner diameter Weight

1.1mm

HR30-6R-3P(71)

HR30-6R-6P(71)

HR30-6R-6S(71)

HR30-7R-12P(71)

HR30-8R-12S(71)

130-1003-4 71

130-1009-0 71

130-1008-8 71

130-1016-6 71

130-1018-1 71

8.3

8.9 M8∞0.75 10

0.8mm

18.4

18.6

9.3

11.5 M11∞1

0.6mm

3.4g

Crimp Type

15.5

HR30-7R-12PC (71)

9.3

Gasket

M11X1(Thread)

13(Hex nut)

Shown with contacts installed.

(Representative example)

Weight

Part No.

HRS No.

Crimp contact

HR30-PC-211

HR30-SC-211

HR30-7R-10PC(71)

HR30-7R-12PC(71)

HR30-8R-12SC(71)

130-1012-5 71

130-1013-8 71

130-1014-0 71

Through hole Type

HR30-8R-12SD (71)

Through hole post

(0.2∞0.5)

F(Hex nut)

(Representative example)

Gasket

Part No.

HRS No.

14.9

15.2

Weight

HR30-6R-6PD(71)

HR30-6R-6SD(71)

HR30-7R-12PD(71)

HR30-8R-12SD(71)

130-1020-3 71

130-1021-6 71

130-1017-9 71

130-1019-4 71

8.3

8.9 M8∞0.75

11.5 M11∞1

9.3

3.4g

HR30 Series●Miniature Waterproof Plastic Connectors

Jacks

Solder Type

HR30-6J-6P (71)

Applicable

cable diameter

B(Fully tightened)

(Representative example)

Part No.

HRS No.

Applicable cable diameter range Solder pot inner diameter Weight

4.2 to 5

HR30-6J-6P(71)

HR30-6JA-6P(71)

HR30-7J-12P(71)

HR30-8J-12S(71)

130-2009-6 71

130-2018-7 71

130-2020-9 71

130-2019-0 71

28.8

0.8 mm

3.5 to 4.3

5.7g

5.9g

37.3

6.2 to 7

0.6 mm

Crimp Type

HR30-7J-12PC (71)

37.3(Fully tightened)

Applicable

cable diameter

(Representative example)

Shown with contacts installed.

Part No.

HRS No.

Applicable cable diameter range

6.2 to 7

Crimp contact

HR30-PC-211

HR30-SC-211

Weight

HR30-7J-10PC(71) 130-2015-9 71

HR30-7J-12PC(71) 130-2017-4 71

HR30-8J-12SC(71) 130-2016-1 71

HR30 Series●Miniature Waterproof Plastic Connectors

Jack for overmolds

Solder Type

HR30-6JB-6P

Part No.

HR30-6JB-6P

HR30-6JB-6S

HR30-7JB-12P

HR30-8JB-12S

HRS No.

Solder pot inner diameter Weight

130-2021-1 00

130-2028-0 00

130-2023-7 00

130-2024-0 00

2.2g

21.7

5.2

0.8 mm

2.3g

12.7

3.6g

23.7

6.4

0.6 mm

4.1g

Crimp Type

HR30-8JB-12SC

23.7

Part No.

HRS No.

130-2025-2 00

130-2022-4 00

130-2026-5 00

Crimp contact

HR30-PC-211

HR30-SC-211

Weight

3.1g

HR30-7JB-10PC

HR30-7JB-12PC

HR30-8JB-12SC

HR30 Series●Miniature Waterproof Plastic Connectors

Caps

For Plugs

HR30-6P-C (71)

(Representative example)

Part No.

HRS No.

Applicable cable diameter

Ø4.2 to 5

Weight

HR30-6P-C(71)

130-3000-7 71

8.4

8.9

8.8

HR30-7P-C(71)

HR30-8P-C(71)

130-3004-8 71

130-3003-5 71

16 10.4 10.5

11.4

Ø6.2 to 7

For Receptacle

HR30-6R-C (71)

(Representative example)

Remarks

Part No.

HRS No.

Weight

HR30-6R-C(71)

130-3001-0 71

12.6 11.8 7.5 12.1 9.1

This cap ﬁts each size of

15 12.1 the HR30-7R and HR30-8R

receptacles

HR30-7R-C(71)

130-3002-2 71

15.5 14.8 8.5

Note : When using these caps, do not use the gasket that is normally supplied with the receptacle.

The “B” diameter end of the receptacle cap will serve as the gasket.

HR30 Series●Miniature Waterproof Plastic Connectors

Crimp Contacts

Male contact

Female contact

1.2

A-A cross-section

(Representative example)

Packaging

type

Packaging

type

Type

Part No.

HRS No.

Weight

Type

Part No.

HRS No.

Weight

Loose contact HR30-PC-111 130-0022-3 100pcs/pack

0.03g/1 pin

Loose contact HR30-SC-111 130-0023-6 100pcs/pack 0.03g/1 pin

Reel contact HR30-SC-211 130-0017-3 10,000pcs/reel 0.03g/1 pin

Reel contact HR30-PC-211 130-0016-0 10,000pcs/reel 0.03g/1 pin

Note : Use wire size 26 to 30 AWG with a jacket diameter of 1 mm max.

Diagrams of Connectors in Combination

Plugs

HR30- P-

Receptacles

HR30- R-

(

)

(

)

Jacks

HR30- J-

(

)

Caps for Receptacle

HR30- R-C 71

Caps for Plug

(

)

(

)

HR30- P-C 71

Note 1: Please use connectors with compatible shell size and number of contacts. If you are using a male contact plug, please also

use a corresponding product with a female receptacle and a jack.

Note 2: Please install the applicable crimping contacts when using the crimping style connectors.

(Please refer to the manual for wiring work.)

Note 3: When using the cap on the receptacle side, do not use the gasket that is normally supplied with the receptacle. The Hirose

cap has the necessary gasket as part of the cap unit.

Cap mounting diagram

Panel

Cable

Cap

HR30 Series●Miniature Waterproof Plastic Connectors

Applicable Tools

Cable Assembly Tools

Applicable Connectors

HR30-6P-3S(71)

HR30-6PA-3S(71)

HR30-6PB-3S

Part No.

HRS No.

HR30-6P-3S-T01

150-0220-1

HR30-6P-6S(71)

HR30-6PA-6S(71)

HR30-6PB-6S

HR30-6P-6S-T01

150-0214-9

HR30-6P-6P(71)

HR30-6PA-6P(71)

HR30-6PB-6P

HR30-7P-10SC(71)

HR30-7PB-10SC

HR30-7P-12S(71)

HR30-7PB-12S

HR30-6P-6P-T01

150-0221-4

150-0228-3

HR30-7P-10SC-T01

HR30-7P-12SC-T01

150-0223-0

HR30-7P-12SC(71)

HR30-7PB-12SC

HR30-8P-12P(71)

HR30-8PB-12P

HR30-8P-12PC-T01

HR30-6R-3P-T01

HR30-6R-6P-T01

150-0227-0

150-0225-5

150-0218-0

HR30-8P-12PC(71)

HR30-8PB-12PC

HR30-6R-3P(71)

HR30-6R-6P(71)

HR30-6J-6P(71)

HR30-6JA-6P(71)

HR30-6JB-6P

HR30-6R-6S-T01

150-0222-7

150-0231-8

HR30-6R-6S(71)

HR30-7J-10PC(71)

HR30-7JB-10PC

HR30-7J-12PC(71)

HR30-7JB-12PC

HR30-8J-12SC(71)

HR30-8JB-12SC

HR30-7J-10PC-T01

HR30-7J-12PC-T01

HR30-8J-12SC-T01

150-0230-5

150-0226-8

Note : Wiring for soldering or disassembly and assembly of plugs and jacks can be accomplished

more efﬁciently when using the cable assembly tool.

Tightening collar for back shell

Part No.

HRS No.

Applicable Connectors

3 and 6 contacts

HR30-6P-T02

150-0216-4

HR30-8P-T02

150-0224-2

10 and 12 contacts

Note: The code ring tightening collar is used to tighten the cord ring to the speciﬁed torque.

(Please refer to the manual for assembly procedures.)

Solder termination fixture

Back shell tightening collar

HR30-6P-6S-T01

HR30-6R-6P-T01

HR30-6P-T02

HR30 Series●Miniature Waterproof Plastic Connectors

Applicable Tools

Type

Description

Part No.

HRS No.

Applicable contact

HR30-SC-111

Applicable wire

AWG26 to 30

Manual

Manual crimping tool

HT-102/HR30-1

150-0229-6

HR30-PC-111

––––––

Automatic crimping machine

Applicator

CM-105C

901-0001-0

901-2015-9

––––––

Automatic

HR30-SC-211

HR30-PC-211

HR30-SC-111

HR30-SC-211

HR30-PC-111

HR30-PC-211

AP105-HR30-1

AWG26 to 30

––––––

Extraction tool

HR30-TP

150-0219-2

Manual contact crimping tool HT-102/HR30-1

Automatic contact crimping machine CM-105C

Contact extraction tool HR30-TP

Receptacle, Board Mounting Through Hole Pattern

2.16

1.44

2.16

1.44

2.16

1.44

2.16

1.44

0.9

6-Ø0.65

12-Ø0.65

0.9

0.72

1.81.8

1.52 1.52

6R-6PD

6R-6SD

7R-12PD

8R-12SD

Remark: 1.The receptacle through hole conﬁguration depicts a view from the mating side of the connector.

2.The above Δ mark indicates the guide key position.

3.The recommended board maximum thickness :1.2mm.

4.Tolerance of +0.03mm is recommended for the plated through hole location. Tolerance of +0.02mm is recommended

for the plated through hole diameter.

Contact Position Arrangement

Panel Cutout

Alignment mark

A^+0.05

Alignment mark

(

)

(

)

(

)

HR30-6P-3S 71

HR30-6P-6S 71

HR30-6P-6P 71

Panel

11 12

Thishness

(

)

(

)

( )

HR30-8P-12PC 71

HR30-7P-10SC 71

HR30-7P-12SC 71

3,6 pos. 1.25 6.45 8.05 3.95

10,12 pos. 1.35 9.25 11.05 5.45

0.7 to 2

0.7 to 3

Remarks: 1. The contact arrangement depicts a view from the wiring side.

2. Installation is accomplished by securing the receptacle from the back side of the panel using the supplied hexagon

nut. The tightening torque of the hexagon nut should be 0.5 N·m for 3, 6 contacts, and 0.8 N·m for 10, 12 contacts.

In addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by Henkel Japan Ltd., Tokyo.

HR30 Series●Miniature Waterproof Plastic Connectors

Assembly Procedures

Plug Assembly Sequence

Push/pull locking collar

Spring

Seal bushing

Strain relief

Insulator/contact assembly

Back shell

Cable

5.5mm max.

10mm max.

15 to 20mm

2mm

Solder type : 3 and 6 Contacts.

Solder type : 12 Contacts.

2mm

2^-_-⁰_0.5mm

Crimp type : 10 and 12 Contacts.

Insert the cable in the following order: 1. Back shell, 2. cord clamp, 3. gasket, 4, spring and 5. locking collar.

Prepare the cable end according to the dimensions shown in Table 1.

Note: When preparing the cable, use caution not to damage the insulation and conductors of the lead wires.

Block end face

Insulator/contact assembly

Solder termination fixture

Solder type

Fix the P case block on the cable termination tool, and after preliminary soldering, solder for 3 to 4 seconds with

the soldering iron at 350 10ç.

Note 1: Take care to avoid creating cold solder joints and solder joints with voids or air holes in it.

Also check to make sure the solder joint is adequately fused between the lead wires and solder cup.

Note 2: The P case block is a precision unit. Please use caution when soldering the P case block so it does not

become damaged. Any damage could result in loss of the waterproof performance.

Crimp type

After crimping the appropriate contact to the cable lead wire, insert the terminated wire into the correct contact

position on the P case block.

Note: After inserting the crimping wire/contact, slightly pull the lead wire and check if the crimping contact is

properly seated into the P case block.

HR30 Series●Miniature Waterproof Plastic Connectors

Fixation

Cable

Back shell

Cable

Push/pull

locking collar

Guide keys

Tightening collar for back shell

(Refer to Table-2)

Plug insulator body

Solder termination fixture

Cable

View A (2:1)

Groove - sealing bushing

Front edge of cable jacket

Fig.B

Fig.C

Table-2

Back shell tightening collar size Torque

Connector

3 and 6 Contacts.

10 and 12 Contacts.

16mm

18mm

0.5N

0.5N m

Insert the cable by fitting the coupling guide to the wire-connected P case block.

Then, pass the cable through and assemble in the following order: 1. spring, gasket, 2 cord clamp, and 3. cord tube.

Make sure when assembling it with the cord clamp and cord tube, to maintain the positional relations between the

cable sheath end face and the concave area of the gasket as shown in Fig.B.

Note: Please install the cord tube using the cord tube tightening tool with the cord ring tightening torque shown in

Table-2.

ln addition, in order to prevent loosening, please apply Locktight 263 and Lockprimer 7649 manufactured by

Henkel Japan Ltd., Tokyo.

When screwing in the cord tube, use your hand to hold the cable so that the cable will not rotate or twist

and apply stress to the soldered wires. However, as the cable tends to be twisted slightly (just over one

rotation), we recommend that you twist it in the opposite direction in advance.

HR30 Series●Miniature Waterproof Plastic Connectors

Points to note when using Heat shrink tubing

We recommend that you use shrink tubing over the solder connections in order to protect the soldered wires and to

enhance insulation. However, please be careful when applying heat in this area when installing the shrink tube so

excess heat does not bleed into or affect the resin parts as shown in the figure below.

If the product does become heated beyond the area shown and into the resin parts, please make sure to prevent the

following.

qDeformation of the C ring. This could result in prevention of locking during mating.

wMelting of some parts.

To prevent the deformation of the C rings of the receptacles and the jack, we recommend heat to be applied after

mating with a compatible plug.

C ring

Receptacle

Shrinkable tube

Heat application area

Mated dimensions

Compatible plug

Receptacle

Heat application area

HR30 Series●Miniature Waterproof Plastic Connectors

General usage notes

1. Mating

2. Un-mating

Mounting panel

Receptacle

Cable

Plug

Mounting panel

Push/pull locking collar

Cable

Alignment marks

When mounting, smooth mating will be achieved by holding When removing the plug from its connected condition, hold

plug in any are “A” and aligning the arrow of the plug with

that of the receptacle, then pushing the plug straight in.

the plug by push/pull locking collar (area “B”) and pull

straight off.

Precautions

1. Make sure the power is off before mating or un-mating the connector.

2. When mating the connector, push it on with a force of a least 30N.

After mating, pull slightly on the connector to check for proper mating and to ensure the connector is ﬁrmly locked to

the receptacle.

3. After mating the connector, do not apply a force over 30N to the cable in the directions shown by the arrows. An

excessive load can lead to connector damage.

30N max.

Panel

30N max.

4. To maintain the waterproof performance, cable clamping force and cable stability, please use a cable within the

recommended for cable diameters.

Because the performance will differ depending on the cable structure, make sure to check all speciﬁcations of the

cable assembly before use or production.

5. Please assemble and install the connector and components with the speciﬁed tightening torque.

If the tightening torque is too weak or too strong, loosening or breakage can occur.

6.Please contact Hirose if your application requires compliance with the Electrical Appliance and Meterial Safety Act.

HR30 Series●Miniature Waterproof Plastic Connectors

USA:

HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS

HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE

2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 580 Waters Edge Lane, Suite 205 Lombard IL

Phone : +1-805-522-7958

Fax : +1-805-522-3217

http://www.hirose.com/us/

Santa Clara, CA 95054

Phone : +1-408-253-9640

Fax : +1-408-253-9641

http://www.hirose.com/us/

60148

Phone : +1-630-282-6701

Mail : inquiries@hirose.com

http://www.hirose.com/us/

USA:

THE NETHERLANDS:

GERMANY:

HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V.

17197 N. Laurel Park Drive, Suite 253, Livonia, Hogehillweg #8 1101 CC Amsterdam Z-O

HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH

Herzog-Carl-Strasse 4 D-73760 Ostfildern

(Scharnhauser Park)

Phone : +49-711-4560-02-1

Fax : +49-711-4560-02-299

http://www.hirose.com/eu/

MI 48152

Phone : +31-20-6557460

Fax : +31-20-6557469

http://www.hirose.com/eu/

Phone : +1-734-542-9963

Fax : +1-734-542-9964

http://www.hirose.com/us/

GERMANY:

FRANCE:

HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE

HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

Muggenhofer Str. 136 90429 Nuernberg

Phone : +49-911 32 68 89 63

Fax : +49-911 32 68 89 69

Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,

Phone : +49-511 97 82 61 30

Fax : +49-511 97 82 61 35

http://www.hirose.com/eu/

71 Boulevard National La Garenne Colombes, 92250, France

Phone : +33 (0) 1 7082 3170

Fax : +33 (1) 7082 3101

http://www.hirose.com/eu/

UNITED KINGDOM:

CHINA:

HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH

Phone : +44-1908 202050

Fax : +44-1908 202058

HIROSE ELECTRIC (SHANGHAI) CO., LTD.

1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th

Road, Huangpu District, Shanghai, China 200001

Phone : +86-21-6391-3355

Fax : +86-21-6391-3335

HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH

Ring Middle Road, ChaoYang District, Beijing, 100025

Phone : +86-10-5165-9332

Fax : +86-10-5908-1381

http://www.hirose.com/eu/

http://www.hirose.com/cn/

CHINA:

HONG KONG:

TAIWAN:

HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.

Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851

Fax : +86-755-8207-0873

Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377

Phone : +852-2803-5338

Fax : +852-2591-6560

Fax : +886-2-2555-7350

http://www.hirose.com/tw/

http://www.hirose.com/cn/

http://www.hirose.com/hk/

KOREA:

SINGAPORE:

INDIA:

HIROSE KOREA CO., LTD.

HIROSE ELECTRIC SINGAPORE PTE. LTD.

HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE

250, Huimanggongwon-ro, Siheung-si,

Gyeonggi-do, Korea, 429-849

Phone : +82-31-496-7000,7124

Fax : +82-31-496-7100

10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C,

079903, Singapore

Phone : +65-6324-6113

Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India

Phone : +91-12-660-8018

65-6324-6123

Fax : +

Fax : +91-120-4804949

http://www.hirose.com/sg/

http://www.hirose.co.kr/

http://www.hirose.com/sg/

INDIA:

MALAYSIA:

THAILAND:

HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD.

HIROSE ELECTRIC SINGAPORE PTE. LTD.

Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma 1-10-07, Suntech @ Penang Cybercity (1164),Lintang BANGKOK OFFICE (REPRESENTATIVE OFFICE)

Gandhi (MG) Road, Bangalore 560 001, Karnataka, India

Phone : +91-80-4120 1907

Fax : +91-80-4120 9908

Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Unit 4703, 47th FL., 1 Empire Tower, South Sathorn

Phone : +604-619-2564

Fax : +604-619-2574

Road, Yannawa, Sathorn, Bangkok 10120 Thailand

Phone : +66-2-686-1255

http://www.hirose.com/sg/

Fax : +66-2-686-3433

http://www.hirose.com/sg/

2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN

TEL: 81-45-620-3526 Fax: 81-45-591-3726

http://www.hirose.com

http://www.hirose-connectors.com

The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.

The contents of this catalog are current as of date of 08/2015. Contents are subject to change without notice for the purpose of improvements.

HR30-8J-12SC(71) [HRS]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E