HR34B-12WLPB-10S(71) [HRS]
Circular Connector, 10 Contact(s), Aluminum Alloy/Polyamide/Zinc Alloy, Female, Solder Terminal, Plug, ROHS COMPLIANT;
| 型号： | HR34B-12WLPB-10S(71) |
| 厂家： | 
HRS |
| 描述： | Circular Connector, 10 Contact(s), Aluminum Alloy/Polyamide/Zinc Alloy, Female, Solder Terminal, Plug, ROHS COMPLIANT 连接器 |
| 文件： | 总8页 (文件大小：268K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Push-on Bayonet Lock Miniature Waterproof Connectors
HR34B Series
Push-on Bayonet Lock
Mating : Just inserting plug unit will complete mating
Un-mating : Rotating sleeve to unlock mating
fig.1
Cable exit directions
■Features
1. Water and dust protection
• IP67 or more (IP68) water and dust protection rating when
fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration
when mounted on the panel - no protective cap is required.
2. Easy and precise mating
• Mating: Just inserting plug unit completes mating
Unmating: Rotating sleeve counterclockwise unlocks
connectors (fig.1)
• Marking helps align plug with receptacle when mating.
• 3 guide keys make blind mating possible.
(Receptacle structure prevents plug from damaging
receptacle terminals)
fig.2
3. Multi-directional cable exit
Right angle plugs allow the cable to exit in 8 directions, in
45˚ increments.(fig.2)
4. Safty standards
¨
The 4-position connectors meet requirements of TUV
standard.
5. Wide variation
Item
Number of positions
Connector type
4,10
straight plug,right angle plug,receptacle
solder,crimp
Terminations(plug)
Terminations(receptacle)
Conduit material
wire solder
plastic,metal
Applicable cable size(Reference)
(Ø5.7~6.5), (Ø6.5~7.3), (Ø8.0~9.0)
2016.14
1
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Product Specifications
10 pos. : 3A
4 pos. : 5A
Current rating
Operating temperature range
Storage temperature range
-25°C to 125°C
-10°C to 60°C
Ratings
10 pos. : 200V AC, 250V DC
4 pos. : 200V AC, 200V DC (Pollution degree 3)
400V AC, 400V DC (Pollution degree 2)
Voltage rating
Item
1.Contact resistance
Specification
1A DC
Conditions
20mø max.
2.Insulation resistance 1,000Mø min.
500V DC
10 pos. : 900V AC / 1 minute
4 pos. : 2,000V AC / 1 minute
3.Withstanding voltage No flashover or insulation breakdown
Frequency : 10 to 500 Hz/cycle, total amplitude of 0.75
mm, 98m/s each, 3 hours in 3 axis.
4.Vibration
No electrical discontinuity of 10μs or longer
No electrical discontinuity of 10μs or longer
Contact resistance : 30mø max.
2
2
Acceleration of 490 m/s , 11 ms duration,
5.Shock
3 axis, each for 3 hours
6.Durability
500 cycles
(Mating / un-mating)
Temperature : -55°C / +15° to +35°C / +85°C / +15° to +35°C
7.Temperature cycle
8.Humidity
Insulation resistance : 500Mø min.
Time
5 cycles
:-30 min. / 2 to 3 min.
/ 30 min. / 2 to 3 min.
Insulation resistance : 50Mø min. (at high humidity)
Insulation resistance : 500Mø min. (when dry)
336 hours at 71°C, and humidity of 95%
At the depth of 1meters for 0.5 hours.
Water protection
9.
No water penetration inside connector
■Materials / Finish
●Plugs
Part
Material
Finish
Remarks
Zinc alloy, aluminum alloy, and
polyamide resin (black)
Black chrome plating, black chromate
finish (Trivalent Chromium)
Outer shell
Insulator
---------------
PPS
Color : Black
Gold plated
Silver plated
UL94V-0
---------------
---------------
10 pos.
Female contacts
4 pos.
Phosphor bronze
Copper alloy
O-ring
Gasket
Fluororubber,
Nitrile hydride rubber
---------------
---------------
●Receptacles
Part
Material
Finish
Remarks
Black chromate finish
(Trivalent Chromium)
Outer shell
Insulator
Zinc alloy
---------------
PPS
Color : Black
Gold plated
Silver plated
Silver plated
---------------
UL94V-0
---------------
---------------
---------------
---------------
10 pos.
Male contacts
Copper alloy
Brass
4 pos.
Ground contact
O-ring
4 pos.
Brass
Fluororubber
2
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■
Product Number Structure
●Plugs
(
)
**
HR34B - 12 WP A - 10 S - X
1
2
3
4
5
6
7
8
Number of contacts.
(Excluding ground contacts)
Contact type
Series name : HR34B Series
1
2
3
5
6
Shell size
Shell style
: Diameter(mm) of the mating interface of the plug
WP : Straight plug
S
: Female, wire solder
WLP : Right-angle plug
SC : Female, crimp
Conduit material and Applicable cable size
4
Keying
A : Conduit material metal, Applicable cable (Reference) : (Ø5.7~6.5)
B : Conduit material metal, Applicable cable (Reference) : (Ø6.5~7.3)
D : Conduit material plastic, Applicable cable (Reference) : (Ø5.7~6.5)
E : Conduit material plastic, Applicable cable (Reference) : (Ø6.5~7.3)
K : Conduit material metal, Applicable cable (Reference) : (Ø8.0~9.0)
7
8
Blank : Standard
X
: X key position
Other specifications : 2 numerical digits wil be added when
there is a specifications change other
than shown in positions q to u
●Receptacles
(
)
**
8
HR34B - 12 WR A - 10 P - X
1
2
3
4
5
6
7
Number of contacts.
(Excluding ground contacts)
Contact type
Series name : HR34B Series
1
2
3
4
5
6
7
Shell size
Shell style
Shell type
: Diameter(mm) of the mating interface of the plug
WR : Receptacle
P
: Male,wire solder
Keying
A : Square flange for 10 positions
B : Square flange for 4 positions
Blank : Standard
: X key position
X
Other specifications : 2 numerical digits wil be added when
there is a specification change other
8
than shown in positions q to u
●Crimp contacts
HR34B - SC1 - 2 1 1
1
2
3
4
5
Series name : HR34B Series
Conductor size : 20 to 25AWG
Plating
1
2
3
4
5
Contact style
Contact type
: SC1 : Female contact
1 : Gold plated
1 : 100pcs/pack
2 : 10,000pcs/reel
3
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Straight plugs
●Standard type (Conduit material :Plastic)
49
◆Wire solder
All dimensions : mm
Part No.
HR34B-12WPD-10S
HR34B-12WPE-10S
HR34B-12WPD-4S
HR34B-12WPD-4S-X
HR34B-12WPE-4S
HR34B-12WPE-4S-X
HRS No.
A
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
Solder cup inner diameter
134-0026-0 00
134-0027-2 00
134-0020-3 00
134-0023-1 00
134-0025-7 00
134-0031-0 00
Ø7.4
Ø8.5
Ø1
(Ø6.5~7.3)
Ø7.4
Ø8.5
(Ø5.7~6.5)
(Ø6.5~7.3)
Ø1.7
◆Crimp (separate contacts required)
Part No.
HRS No.
A
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
HR34B-12WPD-10SC
HR34B-12WPE-10SC
134-0037-6 00
134-0038-9 00
Ø7.4
Ø8.5
(Ø6.5~7.3)
●Robust type(Conduit material :Metal)
◆Wire solder
All dimensions : mm
Part No.
HRS No.
A
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
Solder cup inner diameter
HR34B-12WPA-10S(71)
HR34B-12WPB-10S(71)
HR34B-12WPK-10S
134-0004-7 71
134-0007-5 71
134-0052-0 00
Ø7.4
Ø8.5
Ø9.5
Ø1
(Ø6.5~7.3)
(Ø8.0~9.0)
◆Crimp (separate contacts required)
Part No.
HRS No.
A
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
HR34B-12WPA-10SC
HR34B-12WPB-10SC
HR34B-12WPK-10SC
134-0017-9 00
134-0028-5 00
134-0053-2 00
Ø7.4
Ø8.5
Ø9.5
(Ø6.5~7.3)
(Ø8.0~9.0)
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
BIllustrations of mated connectors.
Straight plug Mating combinations
10 pos.plug + receptacle wire solder
B
50.1
49.6
4
pos.plug + receptacle wire solder
B
4
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Right angle plugs
●Standard type (Conduit material : Plastic)
33.5
Ø19
◆Wire solder
All dimensions : mm
Part No.
HRS No.
A
B
Applicable cable diameter range(Reference) Solder cup inner diameter
Ø7.4
Ø8.5
HR34B-12WLPD-10S
HR34B-12WLPE-10S
HR34B-12WLPD-4S
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S
HR34B-12WLPE-4S-X
134-0039-1 00
134-0040-0 00
134-0030-7 00
134-0034-8 00
134-0035-0 00
134-0036-3 00
(Ø5.7~6.5)
Ø1
(Ø6.5~7.3)
Ø7.4
Ø8.5
30.85
(Ø5.7~6.5)
Ø1.7
(Ø6.5~7.3)
◆Crimp (separate contacts required)
Part No.
HRS No.
A
B
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
HR34B-12WLPD-10SC
HR34B-12WLPE-10SC
134-0041-3 00
134-0042-6 00
Ø7.4
Ø8.5
30.85
(Ø6.5~7.3)
●Robust type (Conduit material :Metal)
◆Wire solder
All dimensions : mm
Applicable cable diameter range(Reference) Solder cup inner diameter
(Ø5.7~6.5)
Part No.
HRS No.
A
B
HR34B-12WLPA-10S(71)
HR34B-12WLPB-10S(71)
HR34B-12WLPK-10S
134-0005-0 71
134-0008-8 71
134-0054-5 00
Ø7.4
Ø8.5
Ø9.5
30.5
Ø1
(Ø6.5~7.3)
(Ø8.0~9.0)
31.5
◆Crimp (separate contacts required)
Part No.
HRS No.
A
B
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
HR34B-12WLPA-10SC
HR34B-12WLPB-10SC
HR34B-12WLPK-10SC
134-0018-1 00
134-0029-8 00
134-0055-8 00
Ø7.4
Ø8.5
Ø9.5
30.5
(Ø6.5~7.3)
(Ø8.0~9.0)
31.5
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
BIllustrations of mated connectors.
Right-angle plug Mating Combinations
A
10 pos. plug shell A,B type.
Plug + receptacle wire solder
Plug + receptacle wire solder
Plug + receptacle wire solder
31.0
31.3
32.0
31.3
10 pos. plug shell D,E type.
10 pos. plug shell K type.
4 pos. plug + receptacle wire solder
A
5
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
■Receptacles
◆Wire solder
1
8
3
4
7
10
A
B
All dimensions : mm
Part No.
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
HRS No.
A
B
Solder cup inner diameter
Ø1
17.26
23.4
134-0016-6 00
134-0021-6 00
134-0024-4 00
18.26
25.4
Ø1.4
O ring for water proof is not attached. Please find appropriate one from the market.
BRecommended panel cutouts
●Receptacle - wire solder
All dimensions : mm
HR34B-12WRB-4P
4-B
HR34B-12WRA-10P
17.26 0.05
HR34B-12WRB-4P-X
A
B
C
D
18.26 0.05
M3∞0.5
1 0/-0.1
12.5 +0.1/0
17 +0.1/0
1.1 0/-0.1
16.3 +0.1/0
20.8 +0.1/0
E
A
Recommended O ring dia.
Part No.
Thickness
Inner diameter
Ø11.5
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
Ø1.5
ØD
ØE
Ø1.5
Ø15.5
BReceptacle Contact Arrangement
4 pos.wire solder
10 pos.wire solder
note.1 View direction : Mating surface
note.2 mark is ground terminal.
1
1
8
2
9
3
2
3
4
5
6
7
10
BCrimp contacts
◆Female
15
Part No.
HR34B-SC1-111
HR34B-SC1-211
HRS No.
Packaging
Applicable conductor
134-0051-7 00
134-0050-4 00
100 pcs/pack
20 to 25AWG
(Stranded wire)
10,000 pcs/reel
Note : Use wire with a jacket diameter of 1.7mm max.
6
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
BConnector Mating Combinations
10 pos. Plugs
10 pos. Receptacles
Straight, Wire Solder or Crimp
HR34B-12WPA-10S(71),10SC HR34B-12WPB-10S(71),10SC
HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC
HR34B-12WPK-10S,10SC
Wire Solder
HR34B-12WRA-10P
Right angle, Wire Solder or Crimp
HR34B-12WLPA-10S(71),10SC HR34B-12WLPB-10S(71),10SC
HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC
HR34B-12WLPK-10S,10SC
4 pos. Plugs
4 pos. Receptacles
Straight, Wire Solder (Standard key position)
HR34B-12WPD-4S
HR34B-12WPE-4S
Standard
key position
Wire solder (Standard key position)
HR34B-12WRB-4P
Right angle, Wire Solder (Standard key position)
HR34B-12WLPD-4S
HR34B-12WLPE-4S
Standard key position
Straight, Wire Solder (X key position)
HR34B-12WPD-4S-X
HR34B-12WPE-4S-X
Wire solder (X key position)
HR34B-12WRB-4P-X
Right angle, Wire Solder (X key position)
HR34B-12WLPD-4S-X
X key position
HR34B-12WLPE-4S-X
X key position
7
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connectors
BApplicable tools
Description
Part No.
HRS No.
Applicable contact
HR34B-SC1-111
Applicable cable
Manual contact crimping tool
Press
HT304/HR34B-1
CM-105C
150-0107-9
901-0001-0
901-2051-2
20AWG,23AWG,25AWG
HR34B-SC1-211
20 to 25AWG
---------------
Applicator
AP105-HR34B-1
HR34B-SC1-111
HR34B-SC1-211
Contact extraction tool
RP6-SC-TP
150-0039-0
◆Manual contact crimping tool
◆
Press CM-105C (Applicator ◆Contact extraction tool
ordered separate)
BHandling
1. Mating
2. Un-mating
Plug
Receptacle
B
A
Rotate counter-clockwise
Mating position alignment marks
Holding the plug by the outer shell (A) align the arrow on the plug Rotate the sleeve (B) counter-clockwise to a full stop and un-mate
with the alignment mark on the receptacle and push straight in. the plug from the receptacle.
When completely mated and locked the alignment
arrow on the plug must line-up with the center line of
the connector (alignment mark on the receptacle).
Center line of the connector
BPrecautions
If the alignment arrow and the center line of the
connectors are not aligned (1 mm max.) re-insert
the plug until they are aligned.
Alignment mark
1 mm max.
1. When disconnecting or inserting the connector, be sure to do so after turning off the power.
2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below
(i.e., the mating mark of the receptacle).
3. Note that the display method of the mating mark will differ depending on the receptacle.
4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.
5. Please consult Hirose Electric Sales for harness assembly procedure.
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
+
+
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 01/2016. Contents are subject to change without notice for the purpose of improvements.
8
相关型号：
©2020 ICPDF网 联系我们和版权申明