HR34B-12WLPD-10SC [HRS]
Push-on Bayonet Lock Miniature Waterproof Connector; 推进式插销锁微型防水连接器
| 型号： | HR34B-12WLPD-10SC |
| 厂家： | 
HRS |
| 描述： | Push-on Bayonet Lock Miniature Waterproof Connector |
| 文件： | 总10页 (文件大小：492K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
The product informaNtionEin tWhis catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
Push-on Bayonet Lock Miniature Waterproof Connector
HR34B Series
Push-on Bayonet Lock
Mating : Just inserting plug unit will complete mating
Un-mating : Rotating sleeve to unlock mating
fig.1
ꢀFeatures
Cable exit directions
1. Water and dust protection
45˚
• IP67 water and dust protection rating when fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration
when mounted on the panel - no protective cap is required.
2. Easy and precise mating
• Mating: Just inserting plug unit completes mating
Unmating: Rotating sleeve counterclockwise unlocks
connectors (fig.1)
• Marking helps align plug with receptacle when mating.
• 3 guide keys make blind mating possible.
(Receptacle structure prevents plug from damaging
receptacle terminals)
fig.2
3. Multi-directional cable exit
Right angle plugs allow the cable to exit in 8 directions, in
45˚ increments.(fig.2)
4. Safty standards
¨
The 4-position connectors meet requirements of TUV
standard.
5. Wide variation
Item
Number of positions
Connector type
4,10
straight plug,right angle plug,receptacle
solder,crimp
Terminations(plug)
Terminations(receptacle)
Conduit material
panel mount through-hole,wire solder
plastic,metal
Applicable cable size
Ø5.3~7.3, Ø6.5~8.0, Ø8.0~9.0(under development)
2010.52
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀSpecifications
10 pos.: 3 A
4 pos. : 5 A
Current rating
Operating temperature range
Storage temperature range
-25°C to 125°C
-25°C to 85°C
Ratings
10 pos.: 200 V AC, 250 V DC
4 pos. : 200 V AC, 200 V DC (contamination level 3)
400 V AC, 400 V DC (contamination level 2)
Voltage rating
Item
1.Contact resistance
Specification
Conditions
30 mø max.
1 A DC
2.Insulation resistance 1,000 Mø min.
500 V DC
10 pos. : 900 V AC / 1 minute
4 pos. : 2,000 V AC / 1 minute
3.Withstanding voltage No flashover or insulation breakdown
Frequency: 10 to 500 Hz/cycle, total amplitude of 0.75 mm,
98m/s each, 3 hours in 3 axis.
4.Vibration
No electrical discontinuity of 10 µs or longer
No electrical discontinuity of 10 µs or longer
Contact resistance: 30 mø max.
2
2
Acceleration of 490 m/s , 11 ms duration,
5.Shock
3 axis, each for 3 hours
6.Durability
500 cycles
(Mating / un-mating)
Temperature :-55°C / +15° to +35°C / +85°C / +15° to +35°C
7.Temperature cycle
8.Humidity
Insulation resistance: 500 Mø min.
Time
5 cycles
:-30 min. / 10 to 15 min. / 30 min. / 10 to 15 min.
Insulation resistance: 50 Mø min. (at high humidity)
Insulation resistance: 500 Mø min. (when dry)
336 hours at 71°C, and humidity of 95%
Water protection
No water penetration when submerged for 48 hours at the depth of 1.8 meters.
9.
ꢀMaterials
ꢀPlugs
Part
Material
Finish
Remarks
Zinc alloy, aluminum alloy, and Black chrome plating, black
Outer shell
Insulator
---------------
polyamide resin (black)
PPS
chromate finish (Cr +3)
Color: Black
UL94V-0
---------------
---------------
10 pos.
4 pos.
Phosphor bronze
Copper alloy
Gold plated
Female contacts
Silver plated
O-ring
Gasket
Fluororubber,
Nitrile hydride rubber
---------------
---------------
ꢀReceptacles
Part
Material
Zinc alloy
PPS
Finish
Black chromate finish (Cr +3)
Color: Black
Remarks
---------------
UL94V-0
Outer shell
Insulator
10 pos.
Copper alloy
Brass
Gold plated
---------------
---------------
---------------
---------------
---------------
Male contacts
4 pos.
10 pos.
4 pos.
Silver plated
Gold plated
Ground contact
O-ring
Brass
Silver plated
Fluororubber
---------------
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀ
Ordering information
ꢀPlugs
(
)
**
HR34B - 12 WP A - 10 S - X
1
2
3
4
5
6
7
8
Number of contact : Number of contacts.
Series name : HR34B Series
1
2
3
5
6
(Excluding ground contacts)
Shell size
Shell style
: Diameter(mm) of the mating interface of the plug
WP : Straight plug
Contact type
S
: Female wire solder
WLP : Right-angle plug
SC : Female crimp
Conduit material and Applicable cable size
4
Keying
A:Conduit material metal, Applicable cable Ø5.3~7.3
B:Conduit material metal, Applicable cable Ø6.5~8.0
D:Conduit material plastic, Applicable cable Ø5.7~7.3
E:Conduit material plastic, Applicable cable Ø6.5~8.0
7
8
Blank : Standard
X
: X key position
Other specifications : 2 numerical digits wil be added when there
is a specifications change other than
K:Conduit material metal, Applicable cable Ø8.0~9.0(under development)
shown in positions q to u
ꢀReceptacles
(
)
**
8
HR34B - 12 WR A - 10 P - X
1
2
3
4
5
6
7
Number of contact : Number of contacts.
Series name : HR34B Series
1
2
3
4
5
6
(Excluding ground contacts)
Shell size
Shell style
Shell type
: Diameter(mm) of the mating interface of the plug
WR : Receptacl
Contact type
P
: Male,wire solder
PD : Male,through hole contact
Blank : Rectangular flange type for 10 positions
A : Square flange for 10 positions
Keying
7
8
Blank : Standard
B : Square flange for 4 positions
X
: X key position
Other specifications : 2 numerical digits wil be added when there
is a specification change other than shown
in positions q to u
ꢀCrimp contacts
HR34B - SC1 - 2 1 1
1
2
3
4
5
Series name : HR34B Series
Conductor size : AWG#20 - 25
Plating
1
2
3
4
5
Contact style
Contact type
: SC1:Female contact
1:Gold plated
1 : 100pcs.per bag
2 : 10,000pcs per reel
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀStraight plugs
ꢀStandard type (Conduit material :Plastic)
49
ꢀWire solder
All dimensions: mm
Part Number
HR34B-12WPD-10S
HR34B-12WPE-10S
HR34B-12WPD-4S
HR34B-12WPD-4S-X
HR34B-12WPE-4S
HR34B-12WPE-4S-X
HRS No.
A
Applicable cable diameter range
Ø5.7~7.3
Solder cup inner diameter
134-0026-0-00
134-0027-2-00
134-0020-3-00
134-0023-1-00
134-0025-7-00
134-0031-0-00
Ø7.4
Ø8.5
Ø1
Ø6.5~8.0
Ø7.4
Ø8.5
Ø5.7~7.3
Ø6.5~8.0
Ø1.7
ꢀCrimp (separate contacts required)
Part Number
HR34B-12WPD-10SC
HR34B-12WPE-10SC
HRS No.
A
Applicable cable diameter range
Ø5.7~7.3
134-0037-6-00
134-0038-9-00
Ø7.4
Ø8.5
Ø6.5~8.0
ꢀRobust type(Conduit material :Metal)
ꢀWire solder
All dimensions: mm
Part Number
HR34B-12WPA-10S(71)
HR34B-12WPB-10S(71)
HR34B-12WPK-10S
HRS No.
A
Applicable cable diameter range
Ø5.7~7.3
Solder cup inner diameter
134-0004-7-71
134-0007-5-71
Under development
Ø7.4
Ø8.5
Ø9.5
Ø1
Ø6.5~8.0
Ø8.0~9.0
ꢀCrimp (separate contacts required)
Part Number
HR34B-12WPA-10SC
HR34B-12WPB-10SC
HR34B-12WPK-10SC
HRS No.
A
Applicable cable diameter range
Ø5.7~7.3
134-0017-9-00
134-0028-5-00
Under development
Ø7.4
Ø8.5
Ø9.5
Ø6.5~8.0
Ø8.0~9.0
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀRight angle plugs
ꢀStandard type (Conduit material : Plastic)
33.5
Ø19
ꢀWire solder
All dimensions: mm
Part Number
HR34B-12WLPD-10S
HR34B-12WLPE-10S
HR34B-12WLPD-4S
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S
HR34B-12WLPE-4S-X
HRS No.
A
B
Applicable cable diameter range
Ø5.7~7.3
Solder cup inner diameter
Ø7.4
Ø8.5
134-0039-1-00
134-0040-0-00
134-0030-7-00
134-0034-8-00
134-0035-0-00
134-0036-3-00
Ø1
Ø6.5~8.0
Ø7.4
Ø8.5
30.85
Ø5.7~7.3
Ø6.5~8.0
Ø1.7
ꢀCrimp (separate contacts required)
Part Number
HR34B-12WLPD-10SC
HR34B-12WLPE-10SC
HRS No.
A
B
Applicable cable diameter range
Ø5.7~7.3
134-0041-3-00
134-0042-6-00
Ø7.4
Ø8.5
30.85
Ø6.5~8.0
ꢀRobust type (Conduit material :Metal)
ꢀWire solder
All dimensions: mm
Part Number
HRS No.
A
B
Applicable cable diameter range
Ø5.7~7.3
Solder cup inner diameter
HR34B-12WLPA-10S(71)
HR34B-12WLPB-10S(71)
HR34B-12WLPK-10S
134-0005-0-71
134-0008-8-71
Under development
Ø7.4
Ø8.5
Ø9.5
30.5
Ø1
Ø6.5~8.0
31.5
Ø8.0~9.0
ꢀCrimp (separate contacts required)
Part Number
HR34B-12WLPA-10SC
HR34B-12WLPB-10SC
HR34B-12WLPK-10SC
HRS No.
A
B
Applicable cable diameter range
Ø5.7~7.3
134-0018-1-00
134-0029-8-00
Under development
Ø7.4
Ø8.5
Ø9.5
30.5
Ø6.5~8.0
Ø8.0~9.0
31.5
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀReceptacles
ꢀWire solder
1
8
3
4
7
10
A
B
All dimensions: mm
Part Number
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
HRS No.
A
B
Solder cup inner diameter
Ø1
17.26
23.4
134-0016-6-00
134-0021-6-00
134-0024-4-00
18.26
25.4
Ø1.3
O ring for water proof is not attached. Please find appropriate one from the market.
ꢀThrough hole
5.8
8.55
20
13.4
3.3
2
Part Number
HRS No.
HR34B-12WR-10PD(71)
134-0003-4-71
O ring for water proof is not attached. Please find appropriate one from the market.
ꢀCrimp contacts
ꢀFemale
15
Part Number
HR34B-SC1-111
HR34B-SC1-211
CL No.
Packaging
Applicable conductor
134-0051-7-00
134-0050-1-00
100 pcs. per bag
10,000 pcs. per reel
AWG #20 - 25
(Stranded wire)
Note: Use wire with a jacket diameter of 1.7mm max.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀConnector Mating Combinations
10 pos. Plugs
10 pos. Receptacles
Straight, Wire Solder or Crimp (Standard key position)
HR34B-12WPA-10S,10SC HR34B-12WPB-10S,10SC
HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC
HR34B-12WPK-10S,10SC
Through hole
HR34B-12WR-10PD
Right angle, Wire Solder or Crimp (Standard key position)
HR34B-12WLPA-10S,10SC HR34B-12WLPB-10S,10SC
HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC
HR34B-12WLPK-10S,10SC
Wire Solder
HR34B-12WRA-10P
4 pos. Plugs
4 pos. Receptacles
Straight, Wire Solder (Standard key position)
HR34B-12WPD-4S
HR34B-12WPE-4S
Standard
polarizing key
Wire solder (Standard key position)
HR34B-12WRB-4P
Right angle, Wire Solder (Standard key position)
HR34B-12WLPD-4S
HR34B-12WLPE-4S
Standard key position
Straight, Wire Solder (X key position)
HR34B-12WPD-4S-X
HR34B-12WPE-4S-X
Wire solder (X key position)
HR34B-12WRB-4P-X
Right angle, Wire Solder (X key position)
HR34B-12WLPD-4S-X
X key position
HR34B-12WLPE-4S-X
X key position
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
ꢀApplicable tools
Description
Manual contact crimping tool
Press
Part Number
HT304/HR34B-1
CM-105
CL No.
Applicable contact
HR34B-SC1-111
Applicable cable
150-0107-9
901-0005-4
901-2051-2
AWG20,AWG23,AWG25
HR34B-SC1-211
AWG20 to AWG25
---------------
Applicator
AP105-HR34B-1
HR34B-SC1-111
HR34B-SC1-211
Contact extraction tool
RP6-SC-TP
150-0039-0
ꢀManual contact crimping tool
ꢀPress CM-105 (Applicator ordered separate)
ꢀContact extraction tool
ꢀIllustrations of mated connectors.
Right-angle plug Mating Combinations
A
Plug + receptacle through-hole
10 pos. plug shell A,B type.
31.0
31.5
31.3
31.8
32.0
32.5
31.3
Plug + receptacle wire solder
Plug + receptacle through-hole
10 pos. plug shell D,E type.
Plug + receptacle wire solder
Plug + receptacle through-hole
10 pos. plug shell K type.
(33.5)
Plug + receptacle wire solder
4 pos.plug + receptacle wire solder
Straight plug Mating combinations
10 pos.plug + receptacle through-hole
10 pos.plug + receptacle wire solder
B
49.6
50.1
49.6
4
pos.plug + receptacle wire solder
8
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
BRecommended panel cutouts
ꢀReceptacle - wire solder
4-B
All dimensions: mm
HR34B-12WRB-4P
HR34B-12WRA-10P
17.26 0.05
HR34B-12WRB-4P-X
A
B
C
D
E
18.26 0.05
M3∞0.5
1 0/-0.1
12.5 +0.1/0
17 +0.1/0
1.1 0/-0.1
16.3 +0.1/0
20.8 +0.1/0
A
Recommended O ring dia.
Part Number
Cross-section
1.5
diameter
ØD
ØE
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
11.5
1.5
15.5
All dimensions: mm
ꢀReceptacle - through hole
O-ring (Not supplied,
cross-section diameter 1.78 ,
inner diameter 20.35)
(13.4)
(13.4)
(18)
4-M3∞0.5
(1.3)
Outline of the O-ring
Notes 1: The receptacle panel cutout shows the view from the mating side of the connector.
BPCB mounting pattern
ꢀReceptacle - Through hole
All dimensions: mm
4.4
2.15
2.15
Alignment mark
Note 1: The contact configuration shows the view from the mating side.
Note 2: Tolerance of 0.05 mm is recommended for the plated through hole location and diameter.
Note 3: Not a plated-through holes.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B SeriesꢀPush-on Bayonet Lock Miniature Waterproof Connector
BReceptacle Contact Arrangement
4 pos.wire solder
10 pos.wire solder
10 pos.through hole
1
1
8
2
9
3
1
8
2
9
3
2
3
4
5
6
7
4
5
6
7
10
10
note.1 View direction:Mating surface of pin insert.
note.2 mark is ground terminal.
BHandling
1. Mating
2. Un-mating
Receptacle
Plug
Locking collar
B
A
Rotate counter-clockwise
Mating position alignment marks
Holding the plug by the outer shell (A) align the arrow on the plug Rotate the locking collar counter-clockwise to a full stop and un-
with the alignment mark on the receptacle and push straight in.
mate the plug from the receptacle.
BPrecautions
Center line of the connector
When completely mated and locked the alignment arrow on the plug must
line-up with the center line of the connector (alignment mark on the
receptacle).
Alignment mark
If the alignment arrow and the center line of the connectors are not aligned
(1 mm max.) re-insert the plug until they are aligned.
1 mm max.
1. When disconnecting or inserting the connector, be sure to do so after turning off the power.
2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram
below (i.e., the mating mark of the receptacle).
3. Note that the display method of the mating mark will differ depending on the receptacle.
4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.
5. Please consult Hirose Electric Sales for harness assembly procedure.
10
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明