HSCH-ASP2PP-F3QW-L [HRS]
SC Type Fiber Optic Connectors;
| 型号： | HSCH-ASP2PP-F3QW-L |
| 厂家： | 
HRS |
| 描述： | SC Type Fiber Optic Connectors |
| 文件： | 总21页 (文件大小：759K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SC Type Fiber Optic Connectors
HSC Series
ꢀFeatures
1. JIS, IEC standards compliant and fully intermateable with NTT's SC products.
JIS C 5973 (F04 type fiber optic connectors)
IEC 61754-4
2. Plugs with strain relief boot
Long strain relief boot assures that there are no performance losses when a pull force is applied in a vertical
bend direction.
The color of the boot identify the type of polishing:
Blue: PC polishing
Green: Angled PC polishing (APC)
Light purple: Advanced PC (AdPC) polishing
Other colors are also possible.
3. Zirconia Split Sleeve Adapter
Reduces the possibility of powdering caused by the repeated insertion and withdrawal of ferrule.
4. Duplex SC Type: Rigid Type
Available in following types;
H type – 8.5 mm spacing between the fibers, for high density applications.
F type – 12.7 mm spacing between the fibers, low profile, for LAN applications.
Refer to page 39 for further information.
5. Duplex SC Type: Adjustable Type -- Comply With ANSI Standards
Floating mechanism with Duplex SC plug.
It is also fully compatible with the HSCF fixed type.
6. Simplified Plugs and Receptacles.
Small size (23.8mm plug length) simplified SC plug is designed for equipments inside connection.
Refer to page 43 for further information.
ꢀApplications
LAN, public communications lines, CableTV, computer transmission systems, test equipment, and other
applications requiring reliable fiber optic connections.
27
ꢀProduct Specifications
Ratings
Operating temperature range
-25°C to +70°C
Storage temperature range
-25°C to +70°C
Item
Test Method (IEC 61300)
Wavelength 1310nm (LD)
Specifications
0.5dB max. (PC, AdPC, APC)
0.3dB max. (PC)
(SM)
(GI)
Insertion Loss
Wavelength 1310nm (LED)
22dB min. (PC)
60dB min. (APC)
40dB min. (AdPC)
(SM)
(GI)
Return Loss
Wavelength 1310nm (LD)
22dB min. (PC)
Simplex plug Engagement force: 19.6 N max.
Separation force: 19.6 N max.
Engagement and Separation
Measured with corresponding connector.
Duplex plug
Engagement force: 39 N max.
Separation force: 39 N max.
/force
Extract zirconia gauge 2.499 ±0.0005 mm dia
from split sleeve.
Copper alloy split sleeve
Zirconia split sleeve
2N to 5.9N
2N to 3.9N
Ferrule withdrawal force
Cable retention
(Straight pull)
1) Insertion loss fluctuation after test: 0.2dB max.
2) No visible damage, dislocation of clamp or cable.
89N tensile load for one minute.
1000 times
Durability
(cycles, mating/un-mating)
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Vibration
Acceleration of 981 m/s2, 6 ms duration,
Shock
sin half-wave waveform, 10 cycles in each of the 3 axis.
1) Insertion loss fluctuation after test: 0.2dB max.
2) No visible damage, cracks or part dislocation.
Humidity
-10°C to 65°C, humidity: 90% to 96%
(Temperature/ humidity- cycles) 20 cycles
-40°C to +75°C 42 cycles
(Complies with Telcordia standard GR-326-CORE)
Change of temperature
Dry heat
Cold
960 hours at 85°C
960 hours at -25°C
Salt mist
48 hours in a 5% concentration of salt mist
No significant corrosion.
ꢀMaterials
Part
Material
Synthetic resin
Stainless Steel
Zirconia
Simplex plug housing
Spring
Ferrule
Simplex adapter housing
4-position adapter housing
5-position adapter housing
Receptacle housing
Attenuator housing
Split sleeve
Synthetic resin or Zinc alloy
Synthetic resin
Synthetic resin
Zinc alloy
Zinc alloy
Zirconia or copper alloy
Synthetic resin
Dust cap
28
ꢀFunction diagram
Simplex type
Adapter-Panel Mounting
Plastic Housing Products
HSC-A3
HSC-A3-D1
HSC-A3-D2
SC type plug housing
Die Cast Housing Products
Strain relief type
(For Cable Diameter: 2 mm & 3mm)
HSC-A2
HSC-A2-D1
HSC-PH2-E1,E2,E5
HSC-PH3-B1,B2,B5
0.9 mm fiber
Conversion adapter
FC to SC - Screw Mounting
Light weight type
HSCJ-HRFCJ-B
HSC-PH0.9-E1,E2,E5
FC to SC - Panel Mounting
Short length type
(For Cable Diameter: 2mm)
HSCJ-HRFCJ-C
HSC-PH2-E1-A
ST to SC - Screw Mounting
Short length type
(For Cable Diameter: 3mm)
HSCJ-HSTJ-B
HSC-PH3-A4
Receptacle
Conversion adapter
- FC jack to SC Plug
HSCP-HRFCJ-1, 2
HSCP-HRFCJ-1AS, 2AS
HSC-R1-B,R2-B
Simplified receptacle
HSC-SR-1,D1
HSC-SR-2,D2
<Tool Insertion/Extraction Connectors>
SC2 type plug housing
Long strain relief
(For Cable Diameter: 2 mm & 3mm)
Adapter
HSC2-PH2-E1,E2,E5
HSC2-PH3-B1,B2,B5
4-Position Adapter
Panel Mounting type
0.9 mm fiber Type
HSC2-4A
HSC2-4A-D1
5-Position Adapter
Panel Mounting type
HSC2-PH0.9-E1,E2
Short length type
(For Cable Diameter: 2 mm)
HSC2-5A
HSC2-PH2-E1-A
Simplified receptacle
Short length type
(For Cable Diameter: 3mm)
HSC2-PH3-A
HSC2-8SR-1
HSC2-8SR-D1
29
Duplex type
<Plug Housings>
<Adapters>
F type
Plug Housing
(For Cable Diameter: 2mm&3mm)
HSCF-2PH2-E1,E2
HSCF-2PH3-B1,B2
<Complies with ANSI
F type
Standard for adjustable Type>
For Single mode
Panel Mounting
(For Cable Diameter: 2mm&3mm)
( )
HSCF-2A P
( )
HSCF-2A-D P
HSCM-2SPH2-B1,B2
HSCM-2SPH3-B1,B2
For Multi mode
(For Cable Diameter: 2 mm & 3mm)
H type
HSCM-2GPH2-B1
HSCM-2GPH3-B1
Snap - in
( )
HSCH-2A1 P
HSCH-2A1-D P
H type
( )
Plug Housing
(For Cable Diameter: 2 mm & 3mm)
Screw Mounting
( )
HSCH-2A P
( )
HSCH-2A-D P
HSCH-2PH2-B1,B2
HSCH-2PH3-B1,B2
Fixed attenuators
For single mode
For GI
HSC-AT 11K-A
HSC-AT5S-B A
**
**
See Page 85 for details.
Terminators
Plug type
Tool- Insertion/Removal
HSC2-TM-P1
HSC-TM-P1
Receptacle type
Tool Insertion/Removal
HSC2-TM-R1
HSC-TM-R1
See Page 89 for details.
30
Simplex type
ꢀStrain relief type
55
25
7.4 0.9
Part Number
CL No.
Fiber cable type
Boot color
Blue
Polishing type Outer jacket fixing
PC
704-0327-3-31
704-0328-6-31
704-3108-6-31
704-0222-5-31
704-0223-8-31
704-3020-7-31
HSC-PH2-E1(31)
HSC-PH2-E2(31)
HSC-PH2-E5(31)
HSC-PH3-B1(31)
HSC-PH3-B2(31)
HSC-PH3-B5(31)
Ø2mm
Light purple
Green
AdPC
APC
PC
Glue
Blue
Ø3mm
Light purple
Green
AdPC
APC
Crimp
33
25
ꢀLight weight type (For 0.9mm fiber)
7.4
0.9
Part Number
CL No.
Boot color
Polishing type
PC
HSC-PH0.9-E1(06)
HSC-PH0.9-E2(31)
HSC-PH0.9-E5(31)
704-0339-2-06
704-0354-6-31
704-3104-5-31
Blue
Light purple
Green
AdPC
APC
ꢀShort length type (For 2mm Cable)
36.5
25
7.4 0.9
Part Number
CL No.
Boot color
Polishing type Outer jacket fixing
PC
(
)
)
HSC-PH2-E1-A 31
704-0464-4-31
704-0480-0-31
704-3124-2
Blue
(
HSC-PH2-E2-A 31
Light purple
Green
AdPC
APC
Glue
HSC-PH2-E5-A
ꢀShort length type (For 3mm Cable)
36.5
25
7.4 0.9
Part Number
CL No.
Boot color
Blue
Polishing type Outer jacket fixing
(
)
)
HSC-PH3-A4 31
704-0245-0-31
704-0245-0-32
PC
Crimp
AdPC
(
HSC-PH3-A4 32
Light purple
31
ꢀTool Insertion/Extraction Plug Housings
ꢀStrain relief type
55
6
Part Number
CL No.
Fiber cable type
Boot color
Polishing type Outer jacket fixing
PC
HSC2-PH2-E1(31) 704-0329-9-31
HSC2-PH2-E2(31) 704-0330-8-31
HSC2-PH2-E5(31) 704-3109-9-31
HSC2-PH3-B1(31) 704-0226-6-31
HSC2-PH3-B2(31) 704-0227-9-31
Blue
Ø2mm
Light purple
Green
AdPC
APC
PC
Glue
Blue
Ø3mm
Light purple
Green
AdPC
APC
Crimp
HSC2-PH3-B5
704-3123-0
ꢀLight weight type (For 0.9mm fiber)
33
6
Part Number
CL No.
Boot color
Polishing type
UPC
HSC2-PH0.9-E1(31)
HSC2-PH0.9-E2(31)
704-0421-1-31
704-0422-4-31
Blue
Light purple
AdPC
ꢀShort length type (For 2mm Cable)
36.5
6
Outer jacket fixing
Glue
Part Number
HSC2-PH2-E1-A
HSC2-PH2-E2-A
CL No.
Boot color
Polishing type
PC
704-0482-6-00
704-0481-3-00
Blue
Light purple
AdPC
ꢀShort length type (For 3mm Cable)
36.5
6
Outer jacket attachment
Part Number
HSC2-PH3-A
CL No.
Boot color
Blue
Polishing type
PC
704-0015-0-31
(31)
Crimp
Note : Please contact HIROSE for other variations.
32
ꢀReceptacles
15.2
12.2
13.4
9
2-Ø2.3
Note: Designed for power meter sensors
Part Number
HSC-R1-B(05)
HSC-R2-B(05)
CL No.
Remarks
For MM
For SM
704-0022-6-05
704-0023-9-05
ꢀFerrules
ꢀFor PC, AdPC and UPC
16
1.5
7.95+0.05
1.8
0
Part Number
CL No.
A dimension
0.125
Applicable Fiber cable
HSC-F321-A125(10)
HSC-F321-A1255(10)
HSC-F321-A126(10)
704-0070-9-10
704-0200-2-10
704-0071-1-10
SM,MM
0.1255
0.126
ꢀFor APC
16.15
8.095 +0.05
1.8
0
Part Number
HSC-F391-A125
HSC-F391-A126
HSC-F391-A127
CL No.
A dimension
0.125
Applicable Fiber cable
SM
704-3101-7
704-3102-0
704-3103-2
0.126
0.127
(1)No gap design.
Minimal gap:(0.1mm max.)
(2)The entrance angle of the fiber has been set at 60° for easy fiber insertion.
60° fiber entrance angle
33
ꢀAdapters - Panel Mounting
ꢀSC adapters
BPanel cut-out
SC/SC Plastic Housing
27.4
3
9.4
1.8
0.5
9.5
2-M2∞0.4
0.5
Ø2.3
+0.2
0.5
or 2-Ø2.4
Panel thickness: 1.6mm
Part Number
HSC-A3(51)
CL No.
Split sleeve
Copper alloy
Zirconia
Remarks
PC,AdPC
APC
704-0092-1-51
704-0217-5-02
704-3007-9-06
HSC-A3-D1(02)
HSC-A3-D2(06)
Zirconia
BPanel cut-out
SC/SC Die Cast Metal Housing
27.4
9.4
3
1.8
0.5
9.5
2-M2∞0.4
0.5
Ø2.3
+0.2
or 2-Ø2.4
Panel thickness: 1.6mm
0.5
Part Number
HSC-A2(51)
CL No.
Split sleeve
Copper alloy
Zirconia
704-0020-0-51
704-0258-2-01
HSC-A2-D1(01)
ꢀSC2 adapters
BPanel cut-out
SC/SC2 4-way adapter
24
3
1.8
28.2
0.5
13
0.
5
Panel thickness: 1.6mm
Part Number
HSC2-4A(51)
CL No.
Split sleeve
Copper alloy
Zirconia
704-0024-1-51
704-0290-5-01
HSC2-4A-D1(01)
BPanel cut-out
SC/SC2 5-way adapter (for Multi-mode fiber)
24
3
35
1.8
13++00..55
Panel thickness: 1.6mm
Part Number
HSC2-5A(51)
CL No.
704-0025-4-51
Split sleeve
Copper alloy
34
ꢀConversion adapters
ꢀFC / SC Screw Mounting
BPanel cut-out
0.5
13.4
21.2
5.5 3.5
Ø9
0.5
2-M2∞0.4
or 2-Ø2.4
12.2
+0.2
+0.5
M8∞0.75
13.4 0.1
Part Number
HSCJ-HRFCJ-B(51)
CL No.
Split sleeve
Copper alloy
704-0021-3-51
BPanel cut-out
ꢀFC / SC Snap-in and/or Screw Mounting
9.4
7.4
Ø9 +00..55
2-M2∞0.4
+0.2
or 2-Ø2.4
+0.5
13.4 0.1
18
21.2
M8∞0.75
Ø2.3
Panel thickness: 1.6mm
Part Number
CL No.
Split sleeve
Copper alloy
HSCJ-HRFCJ-C(51)
704-0206-9-51
ꢀST / SC Screw Mounting
BPanel cut-out
Ø19
13.4
9
Ø9++00..55
2-M2∞0.4
+0.2
or 2-Ø2.4
+0.5
0.1
13.4
14.7
13.7
2-Ø2.2
28.4
Part Number
CL No.
Split sleeve
Copper alloy
HSCJ-HSTJ-B(51)
704-0102-3-51
35
ꢀFC / SC
9.4
7.4
M8∞0.75
21
27.9
(1.8)
Part Number
CL No.
Split sleeve
Copper alloy
Polishing type Applicable Fiber cable
(
)
HSCP-HRFCJ-1 51
704-0203-0-51
704-0288-3-51
704-0204-3-51
704-0289-6-51
PC
GI-50/125
AdPC
(
)
)
HSCP-HRFCJ-1AS 51
(
)
HSCP-HRFCJ-2 51
PC
SM-9.5/125
AdPC
(
HSCP-HRFCJ-2AS 51
ꢀThe positions of SC guide key and FC guide slot will not be always aligned.
ꢀFC / SC
13.7
9
12.8
(3.9)
32
Part Number
CL No.
Split sleeve
Copper alloy
Polishing type Applicable Fiber cable
HRFCP-HSCJ-1(51)
HRFCP-HSCJ-1AS(51)
HRFCP-HSCJ-2(51)
HRFCP-HSCJ-2AS(51)
701-0065-0-51
701-0108-0-51
701-0085-7-51
701-0109-3-51
PC
GI-50/125
AdPC
PC
SM-9.5/125
AdPC
ꢀThe positions of SC guide slot and FC guide key will not be always aligned.
ꢀCap
75
Ø3.6 Hole
Part Number
HSC-C2
CL No.
Applicable products
HSC-A2 , HSC-A3 , HSCJ-HRFCJ-B ,
CHSCJ-HSTJ-B , HSC-R1-B , HSC-R2-B
704-0061-8
36
BMounting Dimensions
Unit: mm
f
Combination
Adapter Housing
Dimensions
a
b
c
d
e
HSC-PH2-E1
HSC-PH2-E2
HSC-PH3-B1
HSC-PH3-B2
HSC-PH2-E1-A
HSC-PH3-A4
HSC-PH0.9-E1
HSC2-PH2-E1
HSC2-PH2-E2
HSC2-PH3-B1
HSC2-PH3-B2
HSC2-PH3-A
HSC-PH2-E1-A
HSC2-PH0.9-E1
HSC-PH2-E1
HSC-PH2-E1
HSC-PH3-B1
HSC-PH3-B2
HSC-A2
58
28
15.2
53.4
23.4
10.6
Plug
Plug
Adapter
Panel
HSC-A2-D1
HSC-A3
HSC-A3-D1
39.5
36
28
26
15.2
15.2
34.9
31.4
23.4
21.4
10.6
10.6
HSC2-4A
58
----
13.5
53.4
----
8.9
HSC2-4A-D1
HSC2-5A
HSC2-5A-D1
39.5
36
----
----
13.5
13.5
34.9
31.4
----
----
8.9
8.9
HSC-R1-B
HSC-R2-B
57.5
27.5
14.7
----
----
----
Note: Panel thickness: 1.6mm
ꢀCable assembly
ꢀSC strain relief type.
Part Number
CL No.
Fiber cable type
SM-9.5/125
Polishing type
PC
Cable Diameter
Ø2mm
HSC-SPE2-F3Q-L
HSC-SPC2-F3A-L
HSC-ASPE2-F3Q-L
HSC-ASPC2-F3A-L
HSC-CSPE2-F3Q-L
HSC-CSPC2-F3A-L
HSC-SPE2-F3P-L
HSC-SPC2-F3B-L
704-1073-2
704-1089-2
704-1071-7
704-1094-2
-------
Ø3mm
Ø2mm
AdPC
APC
PC
Ø3mm
Ø2mm
Ø3mm
-------
Ø2mm
704-1081-0
704-1086-4
GI-50/125
Ø3mm
Note 1: The "L" within the Product Number indicates the length of the cable illustrated on the drawing. Please specify values in metric units.
Note 2: HSC2 cable assemblies are also available.
Note 3: APC polishing is performed at an angle of 8°. Mating with connectors polished PC or AdPC is not possible.
Note : Please contact HIROSE if you have any requests.
37
ꢀTools
ꢀCrimp Tool
Part Number
HSC-T3
CL No.
Applicable connector
704-0287-0
SC plug for 2mm, 3mm cable.
(This is used in crimping of Kevlar at time of the plug termination.)
<Locations>
(1)2mm Jacket crimping: Please select section A
3mm Jacket crimping: Please select section C
(2)KevlarTM crimping: Please select section B
ꢀHSC2 Insertion/Extraction Tool
Part Number
HSC-T1-L
CL No.
Applicable Products
HSC2 series.
704-0286-8
<How to operate>
1.Open the tip of tool by compressing levers as shown below.
Hold/release lever
2.Insert the tool (with opening the tips) into adapter.
3.Release the levers (then the tool catch HSC2 plug) and you can release the connector.
ꢀPlug assemble Tool
Part Number
CL No.
HSC2-PH2/CVMD
902-6029-1
38
SC Duplex
BNotes
SC duplex adapters can be also connected with Simplex SC plugs.
SC type attenuators (HSC-AT11K-Aπ-π) can be connected only with F type adapters.
ꢀPlug Housing
ꢀF Type
7.8
25
55
Part Number
CL No.
Applicable Cable Diameter
Boot Color
Blue
Polishing type
PC
HSCF-2PH2-E1(P)(31)
HSCF-2PH2-E2(P)(31)
HSCF-2PH3-B1(P)(31)
HSCF-2PH3-B2(P)(31)
704-2109-3-31
704-2120-6-31
704-2032-0-31
704-2036-1-31
Ø2mm
Light purple
Blue
AdPC
PC
Ø3mm
Light purple
AdPC
ꢀH Type
9
25
55
Part Number
CL No.
Applicable Cable Diameter
Boot Color
Blue
Polishing type
PC
HSCH-2PH2-B1(P)(31)
HSCH-2PH2-B2(P)(31)
HSCH-2PH3-B1(P)(31)
HSCH-2PH3-B2(P)(31)
704-2046-5-31
704-2058-4-31
704-2054-3-31
704-2050-2-31
Ø
Ø
2mm
3mm
AdPC
PC
Light purple
Blue
AdPC
Light purple
39
ꢀAdapters
BPanel cut-out
ꢀF type Snap-in and/or Screw Mounting
M2×0.4 or
+0.2
2.4
0
26.2 +0.3
0
30.7 0.1
3
27.4
1.8
Panel thickness: 1.6mm
9.4
Part Number
HSCF-2A(P)(51)
HSCF-2A-D(P)(06)
HSCF-2A-D2(P)(06)
CL No.
Split sleeve
Color
Blue
704-2008-6-51
704-2040-9-06
704-2112-8-06
Copper sleeve
Zirconia
Green
ꢀH type Snap-in
BPanel cut-out
27.4
20.5
17.9
13 +0.3
0
1.8
3
(8.5)
Panel thickness: 1.6mm
Part Number
CL No.
Split sleeve
Copper sleeve
Zirconia
Color
Blue
HSCH-2A1(P)(51)
HSCH-2A1-D(P)(02)
704-2066-2-51
704-2117-1-02
ꢀH type Snap-in and/or Screw Mounting
BPanel cut-out
+0.2
0
M2∞0.4 or Ø2.4
17.9
(8.5)
1.8
3
13+0.3
0
18 0.1
27.4
Panel thickness: 1.6mm
Part Number
HSCH-2A(P)(51)
HSCH-2A-D(P)(02)
HSCH-2A-D2(P)(03)
CL No.
Split sleeve
Color
Blue
704-2020-1-51
704-2062-1-02
704-2108-0-03
Copper sleeve
Zirconia
Green
40
BSC Duplex connector assemblies.
Part Number
CL No.
704-4031-9
-------
Fiber cable type
Polishing type
Cable Diameter
HSCF-SP2PP-F3Q-L
HSCH-SP2PP-F3Q-L
HSCF-SP2PP-F3QW-L
HSCH-SP2PP-F3QW-L
HSCF-SP2PP-F3A-L
HSCH-SP2PP-F3A-L
HSCF-SP2PP-F3AW-L
HSCH-SP2PP-F3AW-L
HSCF-ASP2PP-F3Q-L
HSCH-ASP2PP-F3Q-L
HSCF-ASP2PP-F3QW-L
HSCH-ASP2PP-F3QW-L
HSCF-ASP2PP-F3A-L
HSCH-ASP2PP-F3A-L
HSCF-ASP2PP-F3AW-L
HSCH-ASP2PP-F3AW-L
HSCF-SP2PP-F3P-L
HSCH-SP2PP-F3P-L
HSCF-SP2PP-F3PW-L
HSCH-SP2PP-F3PW-L
HSCF-SP2PP-F3B-L
HSCH-SP2PP-F3B-L
HSCF-SP2PP-F3BW-L
HSCH-SP2PP-F3BW-L
Ø2mm
-------
Ø2mm Zip cord
Ø3mm
-------
PC
-------
-------
704-4013-7
-------
Ø3mm Zip cord
Ø2mm
SM-9.5/125
-------
-------
-------
Ø2mm Zip cord
Ø3mm
-------
AdPC
-------
-------
-------
Ø3mm Zip cord
Ø2mm
704-4018-0
704-4038-8
-------
-------
Ø2mm Zip cord
Ø3mm
-------
PC
GI-50/125
-------
-------
704-4039-0
-------
Ø3mm Zip cord
Note 1: The "L" within the Product Number indicates the length of the cable. Please specify "L" in mm.
Note 2: Please contact us if you have any requests. HIROSE will offer excellent solutions to meet your requirements.
BMounting Dimensions
Plug
Plug
Adapter
Panel
<F Type>
Unit: mm
Combination
Dimensions
Adapter
Housing
a
b
c
d
e
f
HSC-PH*-E#
HSCF-PH*-B#(P)
58
28
15.2
53.4
23.4
10.6
HSCF-2A(P)
HSCF-2A-D(P)
39.5
36
28
26
15.2
15.2
34.9
31.4
23.4
21.4
10.6
10.6
HSC-PH*-A4
HSC-PH0.9-E#
<H Type>
Adapter
Combination
Dimensions
Housing
a
b
c
d
e
f
HSC-PH*-E#
HSCH-2PH*-B#(P)
HSCH-2A(P)
HSCH-2A-D(P)
HSCH-2A1(P)
58
28
15.2
53.4
23.4
10.6
HSC-PH*-A4
HSC-PH0.9-E#
39.5
36
28
26
15.2
15.2
34.9
31.4
23.4
21.4
10.6
10.6
Note 1: * indicates cable diameter:
Note 2: # indicates polishing type:
2= Ø2mm diameter
3= Ø3mm diameter
1= PC polishing
2= AdPC polishing
41
Complies with ANSI Standard
ANSI X3T9.3 Fibre Channel Physical and Signaling Interface
ꢀPlug Housings
ꢀFor Single Mode
9.9
14.1
36.7
61.5
Part Number
CL No.
704-2100-9
704-2102-4
704-2133-8
---------
Applicable cable
Boot color Polishing type
HSCM-2SPH2-B1
HSCM-2SPH3-B1
HSCM-2SPH2-B2
HSCM-2SPH3-B2
Simplex-2mm dia. cable or dual fiber zip cable
Simplex-3mm dia. cable or dual fiber zip cable
Simplex-2mm dia. cable or dual fiber zip cable
Simplex-3mm dia. cable or dual fiber zip cable
Blue
PC
Light purple
AdPC
ꢀFor Multi-mode
9.9
14.1
36.7
61.5
Part Number
CL No.
Applicable cable
Boot color Polishing type
HSCM-2GPH2-B1
HSCM-2GPH3-B1
704-2104-0
704-2106-5
Simplex-2mm dia. cable or dual fiber zip cable
Simplex-3mm dia. cable or dual fiber zip cable
Blue
PC
ꢀFerrules
Convertional SC ferrules.
Refer to page 33 for details.
ꢀAdapters
F type SC adapters.
Refer to page 40 for details.
42
Simplified Receptacles & Plugs
ꢀFeatures
1.Space saving: Only 23.8mm plug length.
Types of SC plug
Simplified plug
Length(mm)
23.8
33
SC plug for 0.9mm fiber
SC2 plug for 0.9mm fiber
33
Installation image
In side equipment
Out side equipment
a
a
SC Simplified plug
SC or SC2 plug
43
ꢀProduct Specifications
Ratings
Operating temperature range
-25°C to +70°C
Storage temperature range
-25°C to +70°C
Item
Test Method (IEC 61300)
Specifications
(SM)
(GI)
Wavelength 1310nm (LD)
0.5dB max. (PC, AdPC)
0.3dB max. (PC)
Insertion Loss
Return Loss
Wavelength 1310nm (LED)
(SM)
(GI)
22dB min. (PC) 40dB min. (AdPC)
22dB min. (PC)
Wavelength 1310nm (LD)
Extract zirconia gauge 2.499 ±0.0005 mm dia
from split sleeve.
Copper alloy split sleeve
Zirconia split sleeve
2N to 5.9N
2N to 3.9N
Ferrule withdrawal
Durability
1000 times
(cycles, mating/un-mating)
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours in each of the 3 axis.
Vibration
Acceleration of 981 m/s2, 6 ms duration, sine half-
wave waveform, 10 cycles in each of the 3 axis.
Shock
Insertion loss fluctuation after test: 0.2dB max.
No visible damage, cracks or part dislocation.
Humidity resistance
Temperature: -10°C to 65°C, humidity: 90% to 96%
(Temperature/ humidity- cycles) 20 cycles
Temperature: -40°C / +75°C 42cycles
(Complies with Telcordia standard GR-326-CORE)
Change of temperature
Dry Heat
Cold
960 hours at 85°C
960 hours at -25°C
ꢀMaterials
ꢀSimplified receptacle
Part
Housing
Sleeve
Material
Synthetic resin
Synthetic resin
Split sleeve
Plate
Zirconia or Copper alloy
Stainless steel
Dust cap
Synthetic resin
ꢀSimplified plug
Part
Ferrule
Boot
Material
Zirconia and Synthetic resin
Synthetic resin
Ferrule cap
Synthetic resin
ꢀSimplified plug extraction tool
Part
Material
Extraction tool
Synthetic resin
44
ꢀSimplified receptacle to SC
BPanel cut-out
ꢀSimplex / Shrouded
3
26
7.4
9.4
9.5+0.5
0
Part Number
HSC-SR-1(51)
HSC-SR-D1(02)
HSC-SR-1(03)
CL No.
Split sleeve
Color
Blue
704-0320-4-51
704-0321-7-02
704-0320-4-03
Copper alloy
Zirconia
None
ꢀSimplex / Unshrouded
BPanel cut-out
3
9.35
16.2
7.8
8+0.5
0
Part Number
HSC-SR-2(51)
HSC-SR-D2(06)
HSC-SR-2(03)
CL No.
Split sleeve
Color
Blue
704-0291-8-51
704-0292-0-06
704-0291-8-03
Copper alloy
Zirconia
None
17.9
15.9
(8.5)
ꢀDuplex H type / Shrouded
BPanel cut-out
26
3
1.8
13+0.5
0
18 0.1
7.4
Panel thickness: 1.6mm
Part Number
CL No.
Split sleeve
Color
HSCH-2SR-1(R)(51)
HSCH-2SR-D1(R)(01)
HSCH-2SR-1(R)(03)
704-0293-3-51
704-0294-6-01
704-0293-3-03
Copper alloy
Zirconia
None
Blue
17.9
26
3
BPanel cut-out
ꢀDuplex H type / Shrouded (Without plate)
15.9
(8.5)
13+0.5
0
18 0.1
7.4
Part Number
CL No.
Split sleeve
Color
Blue
HSCH-2SR-3(R)(51)
HSCH-2SR-D3(R)(01)
HSCH-2SR-3(R)(03)
704-0300-7-51
704-0301-0-01
704-0300-7-03
Copper alloy
Zirconia
None
45
ꢀDuplex F Type / Unshrouded
BPanel cut-out
2-M2∞0.4 or 2-Ø2.4+0.2
0
25.7 +0.5
0
30.7 0.1
3
9.4
16.2
7.8
Part Number
CL No.
Split sleeve
Color
Blue
HSCF-2SR-2(P)(51)
HSCF-2SR-D2(P)(02)
HSCF-2SR-2(P)(03)
704-0295-9-51
704-0296-1-02
704-0295-9-03
Copper alloy
Zirconia
None
ꢀSimplified Receptacles to SC2
BPanel cut-out
ꢀ4-position / Shrouded
24.3
3
10.7
4SR
4SR
JAPAN
JAPAN
12.4
12.7+00.5
Part Number
CL No.
Split sleeve
Color
Blue
HSC2-4SR-1(51)
HSC2-4SR-D1(01)
HSC2-4SR-1(03)
704-0311-3-51
704-0312-6-01
704-0311-3-03
Copper alloy
Zirconia
None
ꢀ8-Position / Shrouded
BPanel cut-out
24.3
10.7
3
8
S
R
8 S R
12.4
12.7+0.5
0
Part Number
CL No.
Split sleeve
Copper alloy
Zirconia
Color
Blue
HSC2-8SR-1(51)
HSC2-8SR-D1(01)
HSC2-8SR-1(03)
704-0266-0-51
704-0270-8-01
704-0266-0-03
None
46
ꢀ8-Position / Unshrouded
BPanel cut-out
14.5
11.5 3
８ＳＲ
ＪＡＰＡＮ
12.7+00.5
12.4
Part Number
CL No.
Split sleeve
Copper alloy
Zirconia
Color
Blue
HSC2-8SR-2(51)
HSC2-8SR-D2(01)
HSC2-8SR-2(03)
704-0318-2-51
704-0403-0-01
704-0318-2-03
None
ꢀSimplified plug
ꢀfor 0.9mm fiber
5
4.5
10.3
23.8
Part Number
CL No.
A dimension
0.125
Boot color
Black
HSC2-FK-A125(31)
HSC2-FK-A126(31)
HSC2-FK-A1255(31)
704-0267-3-31
704-0268-6-31
704-0269-9-31
0.126
0.1255
ꢀSplit sleeve
Zirconia
11.4
Copper alloy
Part Number
CL No.
Split sleeve
HSC-SLIT-SLEEVE(51)
HSC-D
704-0275-1-51
704-0264-5
Copper alloy
Zirconia
ꢀExtraction tool for Simplified plug
5
6
30
20
Part Number
HSC-T10
CL No.
704-0350-5
Part Number
HSC-T12
CL No.
704-0448-8
47
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明