HT801/DF59M-2628P [HRS]
2mm Pitch, Multi Functional Connector System;
| 型号： | HT801/DF59M-2628P |
| 厂家： | 
HRS |
| 描述： | 2mm Pitch, Multi Functional Connector System |
| 文件： | 总12页 (文件大小：776K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2mm PitchX Multi Functional Connector System
(Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
DF59 Series
DF59 floating amount 0.5mm(ꢀX,X Z directions)
OꢀY^gZXi^dc
¤%#*bb
MꢀY^gZXi^dc
¤%#*bb
NꢀY^gZXi^dc
¤%#*bb
DF59S/SN floating amount
Features
0.5mm(ꢀX, direction)X 0.2mm(Z direction)
●Common to all series
OꢀY^gZXi^dc
1. High Operating Temperature
DF59’s are rated at temperatures up to 105 ç.
●DF59
¤%#'
MꢀY^gZXi^dc
¤%#*
2. Swing Lock Structure (Wire-to-Board)
NꢀY^gZXi^dc
The DF59 features a “swing-lock” mechanism that employs
both a positive and friction lock. This helps to prevent
accidental unmating by severe wiring and mechanical stress.
¤%#*bb
Fig.1
3. Short-Circuit Pin
The Short-Circuit Pin allows the termination of an open circuit.
Typically used at the end of a series of connected circuit boards.
Swing-Lock Structure
(Board-to-Wire Type)
Positive Lock
4. Multi Function Design
The DF59 has the ability to function as either a Board-to-
Wire or Board-to-Board System. The PCB mounted
receptacle is designed to mate with the W-to-B, B-to-B,
and Short Circuit Pin connectors. This multi function ability
allows versatility while keeping connectors to a minimum.
5. Contact Design
2.48mm
Friction Lock
The terminal design features two-point contact to
ensure a highly reliable connection.
Fig.2
6. Common Applicator
Short-Circuit Pin
Crimping can be performed using the applicator (AP105-
DF11-22S) for the existing series DF11-22S C F(A), by
replacing the die with the one for DF59 series.
* For crimping quality standards and crimping conditions,
crimping needs to be performed in accordance with the
specific conditions of DF59-22PCFA.
8jggZciꢀ8^gXj^i
●Common to DF59/59S/59SN
7. Floating Structure (Board-to-Board)
The Board-to-Board connector can be used to connect two PCB
together in a co-planar arrangement and features a “Stress free
contact” that floats ꢀ.5mm in the ꢁXY and Z dimensions.
Fig.3
W-to-B structure (DF59M)
Clear tactile click and high locking strength achieved
by the robust locking mechanism
Mating force : 16N min. (in a horizontal direction)
8. Space Savings
The DF59 series offers high performance in a compactX
space saving design; featuring a 2mm pitch and coupled
with a mated height of only 2.48mm with AWG#22 cable.
The single position floating plugs DF59S and DF59SN
are specifically designed to save spaceX and can be
mounted in high density applications.
16N min.
9. Robust locking structure on DF59M (W-to-B Connection)
The lock mechanism on compact DF59M provides
16N horizontal lock strength. (Fig.4)
10. Standardization of PCB layout
Fig.4
Standardization of PCB pattern
DF59S/SN type and DF59M type can be used in the
same system by using a common PCB.
The DF59S/SN type is used on board-to-board connectionsX
and the DF59M type is intended for wire-to-board
connections. Although they have different receptaclesX the
PCB mounting pattern can be used for these two types.
Different combinations of these connectors can be used in the
same system with a common PCB. This allows for
standardization of PCB. (Fig.5)
Fig.5
(Note) Each stencil mask is necessary
2016.1e
1
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Product Specifications
DF59/S/SN
3A
Operating Temperature : -40 to 105ç (Note 1)
Operating Humidity Range : 20 to 80%
Current rating
6A (22 AWG), 5A (24 AWG)
4A (26 AWG), 3A (28 AWG)
DF59M
Ratings
DF59/S/SN
DF59M
AC/DC 230V (Note 3)
AC/DC 350V (Note 3)
Storage Temperature Range : -10 to 60ç (Note 2)
Storage Humidity Range : 40 to 70% (Note 2)
Voltage rating
Items
Specifications
Conditions
DF59-＊P-2FC/SP
DF59S/SN
DF59M-1S-H
DF59-＊P-2C
50mø min.
Under 6V DC, must be measured by 100mA
(DC or 1000Hz)
1.Contact resistance
45mø min.
30mø min.
Frequency 10 to 55Hz, single amplitude 0.75mm,
3 directions, 10 cycles each
2.Vibration
3.Shock
No electrical discontinuity over 1µs.
Acceleration 490 m/s2, 11ms; duration, sine half-wave
3 cycles in each of the 3 axis.
No electrical discontinuity over 1µs.
Contact resistance
■
Insulation resistance
■
DF59-＊P-2FC/SP
DF59S/SN
DF59M
Temperature 40 2ç, humidity 90 to 95%,
left for 96 hours
50mø min.
4.Humidity
1000Mø max.
45mø min.
30mø min.
DF59-＊P-2C
Contact resistance
■
Insulation resistance
■
DF59-＊P-2FC/SP
(-55ç: 30 min. ➝ 5-35ç: 2 to 3 min. ➝85ç:
30 min. ➝5-35ç: 2 to 3 min.)
5 cycles
50mø min.
DF59S/SN
5.Temperature cycle
1000Mø max.
DF59M
45mø min.
30mø min.
DF59-＊P-2C
Contact resistance
Number of insertion and withdrawal force
■
■
DF59-＊P-2FC/SP
DF59-＊P-2FC/SP
DF59S/SN
30 times
10 times
50mø min.
6. Operating Life
DF59M
45mø min.
30mø min.
20 times
10 times
DF59-＊P-2C
7.Resistance to
soldering heat
Reflow : Depends on recommended temperature profile.
Hand soldering : Soldering iron temperature 350 10ç, 3 sec.
No melting of resin which affect the performance.
Note 1 :
Note 2 :
Including temperature rise caused by current flow.
The term “storage” refers to products stored for long period of time prior to mounting and use.
Operating temperature and humidity range covers connectors after installation, storage, shipment or during transportation.
Note 3 : The rated voltage is the applied voltage when connectors are mounted parallel to each other on the PCB with a distance of 1.6mm
or more between them. Hirose recommends his mounting distance.
This mounting distance is required in order to prevent creepage between the printed wiring to maintain an effective voltage of
300V, according to IEC 60664 and JIS C 60664 standards.
Materials / Finish
Items
Parts
Materials
LCP
Treatment
UL Specification
UL94V-0
Insulator
Natural
DF59
Gold plated
Receptacle
Phosphor bronze
DF59S
DF59M
Contact
---------------
Tin plated
Copper Alloy
PBT
Insulator
Contact
Insulator
Contact
Insulator
White
Gold plated
Natural
UL94V-0
---------------
UL94V-0
DF59
Brass
LCP
Floating plug DF59S
Brass
Tin plated
Natural
---------------
UL94V-0
LCP
DF59SN
Crimp contact DF59M
Short pin
Brass
Contact
Tin plated
---------------
Copper Alloy
PBT
Insulator
Contact
Insulator
Contact
White
Gold plated
White
UL94V-0
---------------
UL94V-0
Brass
Crimp case
PBT
Crimp contact
Phosphor bronze
Gold plated
---------------
2
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Ordering Information
Please refer to the ordering information below for each connector type
●Receptacle
DF 59 # − * S − * V
q
w
e
r
t
y
u
q Series Name : DF
w Series No. : 59
e None : Standard
S：B-to-B type
y Pitch
ꢀNone : Single contact type
2 : Standard 2mm (4mm : Without the central contact)
u Termination form
ꢀV : SMT straight type (B-to-B type)
ꢀH : SMT right angle type (W-to-B type)
M：W-to-B type
r Number of contacts : 1, 2, 3, 4
t Type of connector
S : Receptacle
●Plug
DF 59 # − * P − * FC
q
w
e
r
t
y
u
q Series Name : DF
w Series No. : 59
e None : Standard
t Type of connector
P : Plug
y Pitch
S：Single contact type
2 : DF59 : 2mm (4mm : Without the central contact)
SN：Single contact slim type
r Number of contacts
ꢀNone : DF59S/SN/M
u Termination form
DF59
：2, 3, 4
FC : Floating
DF59S/SN：1
●Short-Circuit pin
DF 59 − * P − 2 SP
q
w
e
r
t
y
q Series Name : DF
w Series No. : 59
t Pitch : 2mm
y Termination form
SP : Short Pin
e Number of contacts：2, 3, 4
r Type of connector
P : Plug
●Crimp Socket
DF 59 − * P − 2 C
q
w
e
r
t
y
q Series Name : DF
w Series No. : 59
t Pitch : 2mm
y Termination form
Crimp case
C :
e Number of contacts：2, 3, 4
r Type of connector
P : Plug
●Contact（W-to-B）
DF 59 M − 2224 PCF
q
w
e
r
t
q Series Name : DF
w Series No. : 59
e None : Standard
t Form Type/Package Type/Plating type
PCFA : Plug crimping contact·Reel contact·Gold plating
PCA : Plug crimping contact·Bulk contact·Gold plating
PCF : Plug crimping contact·Reel contact·Tin plating
M：Single contact type (W-to-B M=micro)
r Applicable Wire
PC
: Plug crimping contact·Bulk contact·Tin plating
22 ：22 AWG
2224：22 to 24 AWG
2628：26 to 28 AWG
3
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Straight Receptacle (SMT)
6
7
KVXjjb
VgZV
%#,
E2'
8
9
●Recommended PCB Dimensions (t=1.6mm) ●Packaging Dimensions
4
0.1
0.1
2
12 0.1
F
F-F
:¤%#%*
%#+*¤%#%*
F
G-G
G
G
&#&¤%#%*
E2'¤%#%*
Unreeling Direction
8¤%#%*
[Specification No.]
(51) : Gold plating, emboss packaging
Unit : mm
Part No.
HRS No.
No. of contacts
A
B
C
D
E
DF59-2S-2V(51)
DF59-3S-2V(51)
DF59-4S-2V(51)
DF59-2S-4V(51)
667-0001-0 51
667-0002-3 51
667-0003-6 51
667-0021-8 51
2
3
7.2
9.2
11.2
9.2
5.3
7.3
9.3
7.3
2.0
4.0
6.0
4.0
6.0
8.0
10.0
8.0
6.62
8.62
4
10.62
8.62
2*
* DF59-2S-4V(51) is made by removing the middle pin of DF59-3S-2V(51) at the factory.
Note : Please order in full reel quantities. (2,000 pcs/reel)
Floating Plug
17.1
[Specification No.]
(50) : Gold plating,
tray packaging
Unit : mm
Part No.
HRS No.
No. of contacts
A
B
Packaged Quantity/Tray
DF59-2P-2FC(50)
DF59-3P-2FC(50)
DF59-4P-2FC(50)
DF59-2P-4FC(50)
667-0006-4 50
667-0007-7 50
667-0008-0 50
667-0020-5 50
2
3
7.2
9.2
11.2
9.2
2.0
4.0
6.0
4.0
50
4
2*
* DF59-2P-4FC(50) is made by removing the middle pin of DF59-3P-2FC(50) at the factory.
Note : Please order in full tray quantities. (50 pcs/tray)
4
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Short-Circuit Pin
6
7
8
E2'
[Specification No.]
(50) : Gold plated, Tray packaging
Unit : mm
Part No.
HRS No.
No. of contacts
A
B
C
Packaged Quantity/Tray
DF59-2P-2SP(50)
DF59-3P-2SP(50)
DF59-4P-2SP(50)
667-0017-0 50
667-0018-3 50
667-0046-9 50
2
3
4
7.2
9.2
11.2
5.9
7.9
9.9
2.0
4.0
6.0
100
Note : Please order in full tray quantities.
Note : For 4 pos. type contact No.1 and 2, No.3 and 4 are connected respectively.
Crimp Socket
6
7
9
'#))
8
E2'
[Specification No.]
None : 100 pcs/pack
Unit : mm
Part No.
DF59-2P-2C
DF59-3P-2C
DF59-4P-2C
HRS No.
No. of contacts
A
B
C
D
667-0011-4 00
667-0012-7 00
667-0013-0 00
2
3
4
7.2
9.2
11.2
5.9
7.9
9.9
5.2
7.2
9.2
2.0
4.0
6.0
Note : Please order in full pack quantities. (100 pcs/pack)
5
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Crimp contact
&#*)
&#*
i2%#'
Part No.
DF59-22PCFA
DF59-22PCA
HRS No.
Packaging
Quantity
Treatment
667-0016-8 00
667-0022-0 00
Reel contact (Note 1)
Bulk contact (Note 2)
10,000 contacts / reel
100 contacts / pack
Gold plated
Note 1 : Please order reel contacts by full reel quantities. (10,000 pcs/reel)
Note 2 : Please order loose piece contacts in full pack. (100 pcs/pack)
●Applicable Wire (Tin plated soft copper wire)
●Recommended Wire
UL1061, UL3265
Conductor Size (Wire Constitution)
Jacket Diameter
UL1061 (Ø1.26mm)
UL3265 (Ø1.38mm)
●Strip Length
1.7 2.3mm
to
22 AWG (17 /Ø0.16mm)
Note : Please contact your nearest Hirose Sales Representative for information regarding compatible wire Remarks: Please
consult with our sales representative when using wires other than applicable wire.
Note : The strip length is a reference value. Please make adjustments so finished crimps will meet the specified values. Refer to
the crimping quality standards (ATAD-H0504) for details.
6
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Single Contact Type Straight Receptacle (SMT)
1.7±0.3
1.1±0.2
1±0.15
1±0.2
1±0.2
Contact portion
Vacuum area
Lock portion
1.1±0.2
1.7 0.3
±
●Packaging Dimensions
4
0.1
4
2
0.1
0.1
t=0.3 0.05
●
Recommended PCB Dimensions (t=1.6mm)
A
A-A
1.5±0.05
Distance between pads:3.0mm Min.
Lock
Contact
portion
portion
Contact
portion
Mount the lock portion side
towards the board edge.
Lock portion
Board edge
A
Board
edge
B
B
Distance between pads:3.0mm Min.
B-B
1.5±0.05
Unreeling Direction
Part No.
DF59S-1S-V(21)
HRS No.
667-0024-6 21
[Specification No.]
(21) : Tin plating, emboss packaging
Note : Please order in full reel quantities. (10,000 pcs/reel)
Single Contact Type Floating Plug
2. 0.37
1.13 0.2
CAV No.
HRS logo mark
Plug center
markings
Part No.
DF59S-1P-FC(21)
HRS No.
667-0023-3 21
[Specification No.]
(21) : Tin plating, emboss packaging
Note : Please order in full reel quantities. (10,000 pcs/reel)
Single Contact Slim Type Floating Plug
1.7 0.2
1.17 0.2
HRS logo mark
CAV No.
Plug center
markings
Part No.
DF59SN-1P-FC(21)
HRS No.
667-0028-7 21
[Specification No.]
(21) : Tin plating, emboss packaging
Note : Please order in full reel quantities. (10,000 pcs/reel)
Note : Use the special (DF59SN-1P-FC/IN-TOOL) tool for connector insertion.
7
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
■Single Contact Type Right Angle Receptacle (SMT)
2.2 0.3
1
0.2
Vacuum area
1.2 0.2
2.6 0.3
●Recommended PCB Dimensions (t=1.6mm)
●Packaging Dimensions
4
0.1
4
2
0.1
0.1
Recommended PCB pattern(５:１)
Parallel Arrangement Recommended PCB Layout(５:１)
t=0.3 0.0ꢀ
A-A
A
1.5 0.05
The size between pattern : 1.6mm MIN
Connector outline
1.2 0.05
B
1.5 0.05
2.6 0.05
B
A
Vacuum area
Pattern
ꢀ
(2.6)
prohibition area
B-B
PCB end side(Conductor)
Direction of unreeling
HRS No.
Part No.
DF59M-1S-H(21)
Note 1 : Please order in full reel quantities. (10,000 pcs/reel)
[Specification No.]
(21) : Tin plating, emboss packaging
667-0041-5 21
Note 2 : This connector is designed to mate with Crimp contact of DF59M only. (P.8)
■Single Contact Type Crimp Contact
1.8ꢀ 0.2
0.82 0.2
t=0.2 0.0ꢀ
2.ꢀ 0.2
1.2ꢀ 0.2
P=ꢀ.ꢀ 0.2
Applicable Wire
Part No.
HRS No.
By Type
Ø0.16mm Reel contact
Ø0.16mm (Note 1)
Ø0.16mm Bulk contact
Ø0.16mm (Note 2)
Ø0.16mm Reel contact
Ø0.17mm (Note 1)
Ø0.16mm Bulk contact
Ø0.17mm (Note 2)
Quantity Treatment
10,000/reel
Recommended Wire
Jacket Diameter
Conductor Size Wire Constitution
22 AWG
24 AWG
22 AWG
24 AWG
26 AWG
28 AWG
26 AWG
28 AWG
17
11
17
11
/
/
/
/
DF59M-2224PCF 667-0042-8 00
DF59M-2224PC 667-0044-3 00
DF59M-2628PCF 667-0043-0 00
DF59M-2628PC 667-0045-6 00
Ø1.11 to 1.26mm
Ø1.26mm
Ø1.11mm
100/pack
Tin plated
10,000/reel
UL10368
7/
7/
7/
7/
Ø0.88 to 0.98mm
Ø0.98mm
Ø0.88mm
100/pack
Note 1 : Please order reel contacts by full reel quantities. (10,000 pcs/reel)
Note 2 : Please order loose piece contacts in full pack. (100 pcs/pack)
Note 3 : Please consult with our sales representative when using wires other than applicable wire.
Note 4 : The strip length is a reference value. Please make adjustments so finished crimps will meet the specified values.
Refer to the crimping quality standards (ATAD-H0778) for details.
8
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Applicable Crimping Tool
Types
Applicator
Press Unit
Hand Tool
Part No.
HRS No.
Applicable Contact
DF59-22PCFA
Remarks
AP105-DF59-22P
901-4619-8 00
AP105-DF59M-2224P 901-4638-2
DHS887200H-UP
AP105-DF59M-2628P 901-4639-5
DF59M-2224PCF
(Note 2) Manufactured by Japan Automatic Machine Co., Ltd.
(Note 2) Manufactured by Japan Automatic Machine Co., Ltd.
－
DF59M-2628PCF
-
DHS887300H-UP
CM-105
－
901-0005-4 00
DF59-22PCA
※UL1061 AWG#22 Only
DF59M-2224PC
HT801/DF59-22P
901-4619-8 00
HT801/DF59M-2224P 550-0420-3
HT801/DF59M-2628P 550-0421-6
※UL10368 AWG#22、24 Only
DF59M-2628PC
※UL10368 AWG#26、28 Only
DF59-22PCFA
DF-C-PO(B)
DF-C-PO(A)
550-0179-2 00
550-0170-8 00
Hand Tool
（W-to-B）
DF59-22PCA
DF59M Series
Extraction Tool（B-to-B）DF59SN-1P-FC/IN-TOOL 667-0040-2 00
DF59SN-1P-FC
Note 1 : Customers are strongly encouraged to utilize HRS application tooling or tooling created by a Hirose tooling partner.
Hirose assumes no liability for customers using tooling from non-recognized sources.
Note 2 : Please contact Japan Automatic Machine Co., Ltd. (hereinafter J.A.M.) through their website regarding crimping issues
when using applicators manufactured by J.A.M. URL http://www.jam-net.co.jp
Mating Dimensions
●Board-to-board connection (floating plug)
[Standard]
●Short-circuit pin connection
(17.1)
DF59-*P-2FC
DF59-*P-2SP
(7.95)
DF59-*S-2V
DF59-*S-2V
(0.5)
DF59-*S-2V
[Single contact slim type]
Contact Lock
portion portion
Contact
portion
●Wire-to-Board Mated condition
[Standard]
DF59-*P-2C
(18.6)
(17.7)
DF59-*S-2V
DF59SN-1P-FC
DF59S-1S-V
DF59S-1S-V
(0.5)
●Wire-to-Board connection
[Single contact type]
[Single contact type]
Lock
Contact
Contact
portion
portion portion
(21.6)
DF59S-1P-FC
DF59S-1S-V
DF59S-1S-V
(0.5)
9
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
Operating Precautions
1. Recommended Temperature Profile
(Lead-free soldering possible)
10sec MAX
MAX 250ç
250
220ç
200
180ç
150
100
50
0
TIME（sec）
90 − 120sec
60sec MAX
PRE-HEATING TIME
SOLDERING TIME
[Applicable Conditions]
1. Peak Temperature : MAX 250ꢀ
2. Heated Area : 220ꢀ or aboveç ꢁitꢂin 60 sec.
3. Pre-ꢂeating Area : 150 to 180ꢀç 90 to 120 sec.
4. Number of Times : ꢁitꢂin 2 times
*Measured at contact lead area
Please be noted tꢂat tꢂe refloꢁ condition may vary depending on soldering
paste typeç manufacturer of soldering materialç board sizeç as ꢁell as conditions
of otꢂer mounting materials.
(*1) Above temperature profile is our recommended value.
2. Recommended Hand Solder
Conditions
Soldering iron temperature : 350 10ꢀç soldering time : ꢁitꢂin 3 seconds
Tꢂickness 0.1mmç Open ratio : 100%
3. Recommended Screen Tꢂicknessç
Open Ratio (Pattern Area Ratio)
Maximum of 0.02mm at tꢂe connector centerç ꢁitꢂ botꢂ ends of tꢂe connector
as reference points.
4. Warpage of PC board
5. Cleaning Condition
Cleaning ꢁitꢂ IPA is possible. (Cleaning is not recommended. In case of
cleaningç please evaluate if it causes a decrease in tꢂe performance ꢁꢂicꢂ
includes mecꢂanical operation and environmental resistance.)
■ Wꢂen inserting crimp-type (solderless) terminals to crimping (solderless)
socketsç to maintain reliable performanceç please do not insert obliquely.
■ DO NOT mate/un-mate a non-terminated plug ꢁitꢂ a non-mounted
receptacles. Tꢂis may lead to damage or deformation of tꢂe contacts.
■ Please note tꢂat pulling on tꢂe ꢁires or cable during un-mating may cause
damage.
6. Precautions
■ DO NOT apply flux to tꢂe contact terminals ꢁꢂen ꢂand soldering tꢂe
receptacle to tꢂe board. Flux can ꢁick into tꢂe electrical contact areas and
may lead to connection failures.
■ Sligꢂt discoloration on tꢂe insulating materials ꢁill not affect formç fit or
function of tꢂe connectors.
■ Please refer to tꢂe folloꢁing for tꢂe points for proper ꢂandling regarding
mating/unmating operations.
“DF59 Insertion and Removal Manual”
“DF59S Insertion and Removal Manual” ATAD-H0651
“DF59SN Insertion and Removal Manual” ATAD-H0719
“DF59M Operation manual” ATAD-H0779
1ꢀ
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
MEMO :
11
DF59 Series●2mm PitchX Multi Functional Connector System (Floating [Board-to-Board]X Swing-Lock [Wire-to-Board]X Short-Circuit Pin)
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
2300 Warrenville Road, Suite 150,
Downers Grove, IL 60515
Phone : +1-630-282-6700
http://www.hirose.com/us/
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE)
2841 Junction Ave, Suite 200
San Jose, CA. 95134
17197 N. Laurel Park Drive, Suite 253,
Livonia, MI 48152
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
THE NETHERLANDS:
GERMANY:
GERMANY:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
Neumeyerstrasse 22-26, 90411 Nurnberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.com/eu/
http://www.hirose.com/eu/
GERMANY:
FRANCE:
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
71 Boulevard National La Garenne Colombes, 92250, France Milton Keynes, MK5 8NH
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
http://www.hirose.com/eu/
CHINA:
CHINA:
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose.com/cn/
http://www.hirose.com/cn/
http://www.hirose.com/cn/
HONG KONG:
TAIWAN:
KOREA:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
HIROSE KOREA CO., LTD.
250, Huimanggongwon-ro, Siheung-si,
Gyeonggi-do, Korea, 429-849
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7350
http://www.hirose.com/tw/
http://www.hirose.com/hk/
http://www.hirose.co.kr/
SINGAPORE:
INDIA:
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE
10 Anson Road #26-16, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C, Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma
079903, Singapore
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Gandhi (MG) Road, Bangalore 560 001, Karnataka, India
Phone : +65-6324-6113
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
65-6324-6123
Fax : +
http://www.hirose.com/sg/
MALAYSIA:
THAILAND:
PENANG REPRESENTATIVE OFFICE
BANGKOK OFFICE (REPRESENTATIVE OFFICE)
1-21-01, Suntech @ Penang Cybercity (1164), Lintang Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +604-619-2564
Fax : +604-619-2574
Phone : +66-2-686-1255
Fax : +66-2-686-3433
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of ꢀ1/2ꢀ16. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
©2020 ICPDF网 联系我们和版权申明