MQ172-4S/CK-MP [HRS]
Micro-Miniature Interface Connectors For Power Supply/Signaling;型号: | MQ172-4S/CK-MP |
厂家: | HRS |
描述: | Micro-Miniature Interface Connectors For Power Supply/Signaling |
文件: | 总8页 (文件大小:302K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
NEW
Micro-Miniature Interface Connectors For Power Supply/Signaling
MQ172 Series
3 positon size
4 position size
■Fatures
Space saving
[3 Position type]
1. Ultra Miniature/Low Profile SMT Design
With dimensions of 3.9mm(H) x 6.4mm (W) x 6mm (D) for the 3
contact type, this series is ideal for today’s miniature, lightweight
electronic products.
2. Automatic Mounting:
SMT receptacles are packaged in embossed tape and reel for
automatic pick and place installation.
3. Reliable contact:
The 2-point contact design and lead construction provide a contact
which is resistant to vibration and shocks.
4. High current capacity:
Unique contact design ensures high current capacity (e.g., 3A for 3-
position), small as it is.
5. Positive Locking
Applications
Use of a snap-lock system provides the sensation of locking at
the time of insertion.
6. Wide variety of suitable cables:
A wide selection of cable types can be utilized since the plug is
of the soldered wiring type.
Additionally, the plug case and cord bushing are integrated into
a one piece body, allowing for easy assembly by simply
pressing the case into place after the harness work.
6. Keys for preventing incorrect insertion:
Both 3 and 4-contact types have keys to prevent incorrect
insertion.
■Applications
Portable remote terminals, portable telephones, PHS(personal handy
phone system), Notebook PCs, Electronic measuring instruments, etc.
2009.2
1
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
■Product Specifications
Rated Current: 3A (Note.1)
Rated Voltage: DC 30V or less
AC 40V or less
Applicable Temperature Range:
-30ç - +75ç
RATINGS
DESCRIPTION
SPECIFICATIONS
1000Mø or more
No flashover/dielectric Breakdown
30m or less
REQUIREMENTS
Should be measured at DC 100V.
1. Insulation resistance
2. Voltage resistance
3. Contact resistance
4. Vibration
Should be powered at AC 250V for 1 minute.
Measured at 10mA.
ø
10~55Hz, one-sided amplitude 0.75mm, 3
directions for 2 hours, respectively
No instantaneous electric
resistance
Disconnection of 1µsec or more
Leave under the condition of 40 2ç in temperature
and of 90-95% in humidity for 96 hours.
5. Humidity
Contact resistance: 50m
ø
or less
or more
resistance
Insulation resistance: 10M
ø
(-55
ç
: 30 minutes→15-35
ç
:max. 5 minutes→85
ç:
6. Temperature cycle
Contact resistance: 50mø or less
30 minutes→ 15-35
ç:max. 5 minutes) 5 cycles
Insulation resistance: 1000Mø or more
Contact resistance: 50mø or less
7. Plugging/ unplugging life
8. Heat resistance of
soldering
5,000 times
No fusion of resin section affecting performance
SMT type
manual soldering
(receptacle and
plug)
reflow: at recommended temp. profile
Temperature of soldering iron:
350ç3 sec.
(Note.1) For 4-contact type, rated current is 2A, or 3A for optional 2 terminals and 0.5A for other 2 terminals.
(Note.2) Above-stated specifications are typical of this series. For respective formal contract, please refer to "Delivery
Specifications".
■Material Quality
Remarks
Parts
Material
Synthetic resin
Phosphor
Processing
Dielectric
Terminal
Black color
UL94V-0
Engagement area...Gold plating of 0.2∫
Lead section...Solder-plating
Black color
bronze
Cover case(plug)
Synthetic resin
Stainless steel
Stainless steel
UL94V-0
Metal fittings(receptacle)
Lock case(plug)
■Ordering information
●RECEPTACLE
1
2
Series name: MQ172
Series configuration symbol: none...unshielded type
X ...shielded type
MQ172 X - 4 P A (66)
1
2
3
4
5
6
3
4
Number of contacts: 3, 4
Connector type: P...receptacle
S...plug
●PLUG
5
6
Key type symbol: A (only for A type)
Packing type: (55)...tray-based packing
(66)...embossed tape packing
Cover case type: CV...standard product (color: black)
RoHS compliant : (50)
MQ172 X - 4 S A - CV (50)
1
2
3
4
5
7
8
7
8
2
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
■Plugs
●3-Position type
Parts No.
HRS No.
RoHS
MQ172-3SA-CV(50)
CL206-0951-7-50 YES
●4-Position type
Parts No.
HRS No.
RoHS
MQ172X-4SA-CV(50) CL206-2001-9-50 YES
■Harness Tool
Tool name
Parts No.
HRS No.
Parts name of adaptive plugs
MQ172-3SA-CV(50)
MQ172X-4SA-CV(50)
Adaptive cable
Outside diameter:Ø3.5
AWG#24-#32
MQ172-3S/CK-MP
MQ172-4S/CK-MP
CL902-2069-4
CL902-2070-3
Cable caulking jig
(Note.) As the crimp height after crimping depends on cable type, please consult factory about your designated cable.
3
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
■Receptacles
●3-Position type
Parts No.
HRS No.
RoHS
YES
✽✽
✽✽
)
MQ172-3PA-(
)
CL206-0950-4(
✽✽ (55) : tray-based packing
(66) : embossed tape packing
(1 reel = 1,000 pcs.)
B
Illustration Of Receptacle
Set Installed
●4-Position type
(Note.) For MQ172, mounting to circuit boards
is SMT type.
For the purpose of more adequate fixing
against external force,it is desirable to
affix the entire set after setting as shown
in the figure above.
Parts No.
HRS No.
RoHS
YES
✽✽
✽✽
)
MQ172X-4PA-(
)
CL206-2000-6(
✽✽ (55) : tray-based packing
(66) : embossed tape packing
(1 reel = 1,000 pcs.)
4
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
BRecommended Land Pattern Dimensions Diagram
●3-Position type
●4-Position type
Note.) Mounting of this product to circuit boards is the SMT type.
To provide more adequate fixing, use of adhesive for board-installed area is recommended.
5
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
BEmbossed Tape Carrier Dimensions Diagam(JIS-C-0806 dependent)
●Carrier Dimensions Diagram
(Note.) The figure above provides the case of a 3 contact type, dimensions
shown in such figure are the same as those of a 4 contact type.
●Reel Status Diagram
6
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
BRecommended Temperature Profile
(soldering requirements)
●Board
Dimensions: 50X33X0.8(mm)
Material: glass epoxy
●Cream soldering
Composition: Sn 96.5 / Ag 3.0 / Cu 0.5
Metal mask thickness: 0.15mm
●Reflow method
IR reflow
●Measurement spot of setting temperature
Housing (mold) surface
7
MQ172 Series●Micro-Miniature Interface Connectors For Power Supply / Signaling
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
HIROSE ELECTRIC (U.S.A.), INC. North California Office HIROSE ELECTRIC (U.S.A.), INC. Dallas Office
2688 Westhills Court, Simi Valley, CA 93065-6235 20400 Stevens Creek Blvd., Ste 250, Cupertino, 1701 N. Greenville Ave. Ste 817, Richardson,
Phone : 1-805-522-7958
Fax : 1-805-522-3217
http://www.hiroseusa.com
CA 95014
TX 75081
Phone : 1-408-253-9640
Fax : 1-408-253-9641
http://www.hiroseusa.com
Phone : 1-469-330-9200
Fax : 1-469-330-9205
http://www.hiroseusa.com
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. Chicago Office
HIROSE ELECTRIC (U.S.A.), INC. New York Office
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
2777 Finley Road, Suite 19 Downers Grove, 510 Broadhollow Road, Suite 305, Melville, 37650 Professional Center Drive, Suite 120A,
IL 60515
NY 11747
Livonia, MI 48154
Phone : 1-630-916-1455
Fax : 1-630-916-1451
http://www.hiroseusa.com
Phone : 1-516-249-5259
http://www.hiroseusa.com
Phone : 1-734-542-9963
Fax : 1-734-542-9964
http://www.hiroseusa.com
GERMANY:
THE NETHERLANDS:
FINLAND:
HIROSE ELECTRIC GmbH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : 49-711-4560-02-1
Fax : 49-711-4560-02-299
http://www.hirose.de
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : 31-20-6557490
Fax : 31-20-6557469
http://www.hiroseeurope.com
Hirose Electric Europe B.V. Finland Office
Teknobulevardi 3-5 01530 VANTAA
Phone : 358-9-2517-8459
Fax : 358-9-2517-8460
http://www.hiroseeurope.com
UNITED KINGDOM:
CHINA:
CHINA:
HIROSE ELECTRIC UK LTD.
HIROSE ELECTRIC CO., LTD. BEIJING REPRESENTATIVE OFFICE HIROSE ELECTRIC (SHANGHAI) CO., LTD.
First Floor, St Andrews House, Caldecotte Lake A1205, Ocean International Center, Building 56# East 4th 1501-02, Cross Tower Building, 318 Fuzhou Road,
Business Park, Milton Keynes MK7 8LE
Phone : 44-1908-369060
Fax : 44-1908-369078
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : 86-10-5165-9332
Fax : 86-10-5908-1381
Huang Pu District, Shanghai 200001
Phone : 86-21-6391-3355
Fax : 86-21-6391-3335
http://www.hirose.co.uk
http://www.hirose-china.com.cn
http://www.hirose-china.com.cn
CHINA:
HONG KONG:
TAIWAN:
HIROSE ELECTRIC CO., LTD. SHENZHEN OFFICE
Room 1902-05, Office Tower Shun Hing Square, Di Wang Commercial Centre Unit 1102 A&B, Energy Plaza, 92 Granville Road,
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : 86-755-8207-0851
HIROSE ELECTRIC CO., LTD.
HIROSE ELECTRIC TAIWAN CO., LTD.
No.28 Lane 247 Sec. 2, Yen Ping N, Rd. Taipei
Phone : 886-2-2557-7351,7352
Fax : 886-2-2552-9851
Tsim Sha Tsui East, Kowloon
Phone : 852-2803-5338
Fax : 86-755-8207-0873
Fax : 852-2591-6560
http://www.hirose-taiwan.com.tw
http://www.hirose-china.com.cn
http://www.hirose-hongkong.com.hk
SINGAPORE:
KOREA:
HIROSE ELECTRIC CO., LTD.
HIROSE KOREA CO., LTD.
10 Anson Road #26-16 International Plaza 079903 1261-10, Jeoungwhang-Dong, Shihung-City,
Phone : 65-6324-6113
65-6324-6123
Kyunggi-Do 429-450
Phone : 82-31-496-7000,7124
Fax : 82-31-496-7100
Fax :
http://www.hirose-singapore.com.sg
http://www.hirose.co.kr
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of 02/2009. Contents are subject to change without notice for the purpose of improvements.
88
相关型号:
©2020 ICPDF网 联系我们和版权申明