MS-156R-HRMJ-1 [HRS]
Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz;
| 型号： | MS-156R-HRMJ-1 |
| 厂家： | 
HRS |
| 描述： | Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz |
| 文件： | 总12页 (文件大小：1240K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
MS-156C Series
■Overview
Developed for inspection of high frequency
circuits used in portable terminals.Verification of
the circuit performance is accomplished by
simply inserting the external plug in the board
mounted receptacle.This action re-directs the
circuit from normal condition to the plug side.
Removing the plug restores circuit to its normal
condition.
■Features
Space-saving design
Low profile: 1.35 mm protrusion above the board.
Lightweight: 0.014 g. total weight.
1.Low insertion loss
0.15 dB MAX (DC to 2.5GHz)
0.2 dB MAX (2.5GHz to 6GHz)
0.4 dB MAX (6GHz to 11GHz)
(NORMALLY CLOSED)
2.Space-saving design
2.3 mm x 2.3 mm occupied board space.
3.Low profile
MS-156C Series
1.35 mm high above the board.
4.Lightweight
Comparison with our conventional type
0.014 g. total weight
Conventional type
●Footprint
MS-156C3
5.Durability
100 mating/unmating cycles, with corresponding
plug.
2.7
2.3
6.Performs over a wide frequency range
Applicable frequencies range over a wide band,
from DC to 11 GHz.
7.Board placement with automatic
equipment
27% saving of space
Packaged on tape-and-reel.
●Height
8.Halogen Free, Beryllium free
Chlorine, and bromine are not used in the
receptacles.
*Definition according to IEC 61249-2-21.
Br 900 ppm max., Cl 900 ppm max., and Br + Cl
1500 ppm max.
15% lower profile
●Weight
0.025g
0.014g
44% lighter weight
1
2015.1w
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
■Product Specifications
Unmated
Mated with MS-156-HRMJ-3 plug
-40ç to +85ç
Operating
-40ç to +85ç
temperature range
2W
2W
Rated power
DC to 11GHz
1.2 max.(DC to 2.5GHz)
DC to 8GHz
Frequency range
1.4 max.(DC to 3.0GHz)
1.3 max.(2.5GHz to 6.0GHz)
V.S.W.R.
1.8 max.(3.0GHz to 8.0GHz)
1.5 max.(6.0GHz to 11.0GHz)
0.15 dB max.(DC to 2.5GHz)
0.5 dB max.(DC to 3.0GHz)
0.2 dB max.(2.5GHz to 6.0GHz)
0.8 dB max.(3.0GHz to 6.0GHz)
0.9 dB max.(6.0GHz to 8.0GHz)
Insertion loss
Isolation
0.4 dB max.(6.0GHz to 11.0GHz)
20 dB min.(DC to 3.0GHz)
15 dB min.(3.0GHz to 6.0GHz)
12 dB min.(6.0GHz to 11.0GHz)
Item
1.Contact resistance
2.Insulation resistance
3.Withstanding voltage
4.Vibration
Specification
100 mø max.
1000 Mø min.
No flashover or insulation breakdown 100 V AC / 1 minute
Frequency:10 to 55 Hz, single amplitude of
Conditions
100 mA max.
100 V DC
No electrical discontinuity of 1 µs or
more
0.75 mm, 2 hours in each of the 3 axis.
Acceleration of 490 m/s , 6 ms duration, sine half-
2
5.Shock
wave waveform, 3 cycles in each of the 3 axis
Temperature: -55ç / +5ç to +35ç / +85ç /+5ç to +35ç
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
6.Temperature cycle
Time: 30 / 5 max. / 30 / 5 max. (Minutes)
50 cycles
Contact resistance: 100 mø max.
7.High temperature exposure
8.Low temperature exposure
9.Humidity
96 hours at 85ç
Insulation resistance: 10 Mø min.
Contact resistance: 100 mø max.
96 hours at -55ç
Insulation resistance: 10 Mø min.
Contact resistance: 100 mø max.
96 hours at 40 2ç, and humidity of 90 to 95ꢀ
100 cycles
Insulation resistance: 10 Mø min.
Contact resistance: 100 mø max.
10. Durability (mating/un-mating,
with corresponding plug)
Note 1: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and
specifications for a specific part number shown.
■Materials
Part
Material
Phosphor bronze
6T Nylon
Finish
Remarks
---------------------------
UL94HB
Shell
Gold plated
Insulator
---------------------------
Common terminal
Antenna terminal
Cu-Ni-Si alloy
Phosphor bronze
Selective gold plated
Selective gold plated
---------------------------
---------------------------
2
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
BTypical Data
●NORMALLY CLOSED(N.C)
2.0
1.9
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.0
0.2
0.4
Insertion loss
0.6
0.8
1.0
1.2
1.4
1.6
1.8
V.S.W.R.
2.0
0
1
2
3
4
5
6
7
8
9
10 11[GHz]
●NORMALLY OPEN(N.O)
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
Insertion loss
V.S.W.R.
1.8
2.0
8 [GHz]
1.0
0
1
2
3
4
5
6
7
●ISOLATION
0
5
10
15
20
25
30
35
40
45
50
Isolation
0
1
2
3
4
5
6
7
8
9
10 11[GHz]
3
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
■Receptacle
'#(
¢&#.'
Part No.
MS-156C3
MS-156C3(20)
HRS No.
Packing
358-0346-0
358-0346-0 20
10,000 pcs/reel
2,000 pcs/reel
6ꢃiZgb^cVa
8ꢃiZgb^cVa
■Circuit diagram
NORMALLY CLOSED (N.C)
NORMALLY OPEN (N.O)
G
G
G
A
G
A
'ꢀ%#+
'ꢀ%#+
'ꢀꢁ&#&ꢂ
B
B
C
G
C
G
G
G
Plug
MS-156C3
Plug MS-156C3
BPCB mounting pattern and metal mask dimensions
* Request drawing of the specific part for exact dimensions and tolerances.
* Specified dimensions must be followed to assure correct board placement and performance.
Metal mask dimensions
0.1 thick
PCB mounting pattern
2∞1.8
2∞1
2∞2.4
C0.3
2∞0.9
2∞0.5
0.48
1.44
0.48
0.3
1.7
0.3
This area must be free of conductive traces and resist field.
4
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
BPrecautions
1. Mounting this product using PCB patterns or metal mask dimensions other than the ones
specified, may result in a product malfunction due to solder and/or flux wicking.
2. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces.
Placing conductive traces in this area may affect performance and will void product warranties.
When the bottom surface of the product (i.e., the
shaded area of the specified land
dimensions diagram on the previous page) has been processed with a susbtrate copper trace
and resist processing, Hirose Electric will not be able to warrant the product.
3. Do not use hand soldering for mounting of MS-156C3.
Doing so could result in solder and flux wicking to the contact areas.
4. Exercise caution as not to allow any debris to enter the board mounted MS-156C when cutting
PCB.
-Example of a PCB after mounting the MS-156C3-
(Position relation between MS-156C3 and the web tab)
-Example of incorrect mounting-
-Recommended example-
Design with no web tab
near MS-156C3
Web tab
Mounted substrate
MS-156C3
MS-156C3
If the MS-156C3 is mounted too close to a web tab, there is a possibility that
fine powder residue generated during depaneling could infiltrate the MS-156C3
swich and cause damage.
Optimal design with no web tab near
the MS-156C3.
5. This product is intended for use only in testing the circuit.
It cannot be used as an interface.
6. Please refrain from using the product in environments specifically affected by excessive
vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures
such as outdoor equipment. It might cause degradation or destruction of the product.Even if it
endures during a short time, long time quarification is not quaranteed.
7. Plugs can be roughly classified to two types.
- For mass production line automatic check (Press down type)
- For manual check (With retentive lock) : Unable to be used at production line.
8. Do not use the washing process.
9. Please use a design in which the device housing does not exert pressure or force on the
MS-156C in the event that the finished device is accidently dropped.
10. Do not apply heat(heat gun or hot plate) over 260ç for more than 10 seconds. Exceeding this
thermal limit could cause the resin to melt and cause deformation.
11. When automatic inspections are to be performed during the manufacturing operations, request
the MS-156 plug connector manual for examples of implementation.
5
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
BPacking Specifications
●MS-156C3
)
ꢁ&#.*ꢂ
)
'
6ꢃiZgb^cVa
6ꢃiZgb^cVa
:
8ꢃiZgb^cVa
8ꢃiZgb^cVa
9
JcgZZa^c\ꢃY^gZXi^dc
:
●Reel dimentions
JcgZZa^c\ꢃY^gZXi^dc
&'#)
Part No.
Reel Size
R = Ø380mm
R = Ø180mm
Packing
MS-156C3
10,000 pcs/reel
2,000 pcs/reel
MS-156C3(20)
BRecommended Temperature Profile
10 sec.max.
Temperature (ç)
260
230
220
200
Using Lead-free Solder paste
180
: 260ç
: 10 sec. max.
q Maximum temperature
w Peak temperature time
e 230ç min.
150
: 40 sec. max.
100
50
: 60 sec. to 150 sec.
: 60 sec. to 120 sec.
r 220ç min.
t 180ç to 200ç
: 0.1 mm
: 2 cycles
y Metal mask thickness
u Reflow cycles
Time (sec.)
60 sec. to 120 sec.
40 sec.max.
60 sec. to 150 sec.
6
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
BMS-156C Series plugs and adapters
<product name>
<Page>
Cable harness type
……………………………MS-156-C(LP)-1
Press down, right angle type
8
8
8
πNeeds a test fixture with a floating
mechanism for installation.
……………………………MS-156-088LP-H1
MS-156-088LP-H2
Simplified lock, right angle type
πFor evaluation
Cannot be used for automated inspection process.
……………………………MS-156C-LP-068
For antenna type
πCannot be used for circuit inspection.
SMA conversion Adapters
……………………………MS-156-HRMJ-H1
Simplified lock type
9
πFor evaluation
Cannot be used for automated inspection process.
9
9
……………………………MS-156-HRMJ-3
Press down type
MS-156-HRMJ-14
πNeeds a test fixture with a floating
mechanism for installation.
……………………………MS-156LP-HRMJ-8
Right angle type
9
10
10
10
……………………………MS-156-HRMJ-10
MS-156-HRMJ-12
Floating (self-pressing)
πBuilt-in, spring loaded push-down mechanism
Stroke length controlled by fixture.
MS-156-HRMJ-29
Adapter for plug inspection
……………………………MS-156R-HRMJ-1
……………………………MS-156R-NJ-1
SMA Conversion Adapter
N Conversion Adapter
11
11
When automatic inspections are to be performed during the manufacturing operations, request the instruction
manual titled "MS-156 Plug Connector" which includes examples of actual use.
7
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
■Plugs
●Press down, right angle
'%#.
'#.
-
&&#&*
¢(#'
Part No.
HRS No.
Durability
MS-156-C(LP)-1
358-0173-0
10,000 Times
Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)
●Simplified lock, right angle, short
1.3
15
8.1
3.2
Ø2.5
Part No.
MS-156-088LP-H1
Applicable cable: DFS111-UL1979 (Junkosha Ltd.)
HRS No.
Durability
500 Times
358-0268-5
Please contact Hirose Sales Representative for cable length and
cable end treatment.
●Simplified lock, right angle, long
1.6
21.8
14.9
10
Ø2.5
Part No.
HRS No.
358-0275-0
Applicable cable: DFS111-UL1979 (Junkosha Ltd.)
Durability
500 Times
MS-156-088LP-H2
Please contact Hirose Sales Representative for cable length and
cable end treatment.
●Simplified lock, right angle, for antenna
5.9
Part No.
HRS No.
Durability
30 Times
MS-156C-LP-068
358-0276-3
Applicable cable: RF-MF50161 (Nissei Electric Co., Ltd.)
Please contact Hirose Sales Representative for cable length and
cable end treatment.
8
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
■SMA Conversion Adapters
●Simplified lock
&$)"(+JCH"'6
'&#.-
-
¢-#*
&#+
-#&-
*#.
Part No.
MS-156-HRMJ-H1
HRS No.
Durability
500 Times
358-0290-4
●Press down, with flange, short
28.13
18.63
8
1
2∞Ø2.6
8.12
1/4-36UNS-2A
Part No.
HRS No.
Durability
MS-156-HRMJ-3
358-0171-5
10,000 Times
●Press down, with flange, long
33.01
8
23.51
1
2∞Ø2.6
13
1/4-36UNS-2A
Part No.
HRS No.
Durability
MS-156-HRMJ-14
358-0198-1
10,000 Times
●Press down, with flange, right angle
29.23
18.63
8
10.6
1
7.73
1/4-36UNS-2A
Part No.
HRS No.
Durability
MS-156LP-HRMJ-8
358-0289-5
100,000 Times
9
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
●Floating (Self-Pressing)
38.6
28.24
13
2∞Ø2.6
2.5
11.75
1.45
1/4-36UNS-2A
Part No.
HRS No.
358-0194-0
Durability
MS-156-HRMJ-10
10,000 Times
●Floating (Self-Pressing)
39.85
29.49
12
2∞Ø2.6
2.5
11.75
3.75
1/4-36UNS-2A
Part No.
HRS No.
Durability
MS-156-HRMJ-12
358-0196-6
10,000 Times
●Floating (Self-Pressing)
38.6
28.24
12
2∞Ø2.6
8
2.5
11.2
2∞Ø2.1
3.3
Part No.
HRS No.
Durability
MS-156-HRMJ-29
358-0295-8
200,000 Times
10
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
■Adapter for plug inspection
●SMA Conversion Adapter
16.05
8.3
0.75
3 6.3
1/4-36UNS-2A
Part No.
HRS No.
Durability
500 Times
MS-156R-HRMJ-1
358-0188-8
●N Conversion Adapter
41.9
2.54
14.3
0.75
13.21
5/8-24UNEF-2A
Part No.
MS-156R-NJ-1
HRS No.
Durability
500 Times
358-0176-9
11
MS-156C Series●Subminiature Coaxial Switch 1.35 mm High, DC to 11 GHz
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE
2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 580 Waters Edge Lane, Suite 205 Lombard IL
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hirose.com/us/
Santa Clara, CA 95054
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
60148
Phone : +1-630-282-6701
Mail : inquiries@hirose.com
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V.
Laurel Office Park III 17197 Laurel Park Drive Hogehillweg #8 1101 CC Amsterdam Z-O
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
Suite 253 Livonia, MI 48154
Phone : +1-734-542-9963
Fax : +1-734-542-9964
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
http://www.hirose.com/us/
GERMANY:
GERMANY:
FRANCE:
HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE
HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
Bayernstr. 3, Haus C 30855 Langenhagen, Germany Regus La Garenne Colombes,Place de La Belgique,
Phone : +49-511 97 82 61 30
Fax : +49-511 97 82 61 35
http://www.hirose.com/eu/
71 Boulevard National La Garenne Colombes, 92250, France
Phone : +33 (0) 1 7082 3170
Fax : +33 (1) 7082 3101
http://www.hirose.com/eu/
http://www.hirose.com/eu/
UNITED KINGDOM:
CHINA:
CHINA:
HIROSE ELECTRIC EUROPE BV (UK BRANCH)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing A1001, Ocean International Center, Building 56# East 4th
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose.com/eu/
http://www.hirose.com/cn/
http://www.hirose.com/cn/
CHINA:
HONG KONG:
TAIWAN:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD. HIROSE ELECTRIC TAIWAN CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66 103 8F, No.87, Zhengzhou Rd., Taipei
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +886-2-2555-7377
Phone : +852-2803-5338
Fax : +852-2591-6560
Fax : +886-2-2555-7350
http://www.hirose.com/cn/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
KOREA:
SINGAPORE:
INDIA:
HIROSE KOREA CO., LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE
1261-10, Jeoungwhang-Dong, Shihung-City, 10 Anson Road #26-1, International Plaza Office NO.519, Regus-Green Boulevard, Level5, Tower C,
Kyunggi-Do 429-450
079903, Singapore
Phone : +65-6324-6113
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr/
65-6324-6123
Fax : +
http://www.hirose.com/sg/
http://www.hirose.com/sg/
INDIA:
MALAYSIA:
THAILAND:
HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD.
Unit No.03, Ground Floor, Explorer Building International Tech 1-10-07, Suntech @ Penang Cybercity (1164),Lintang BANGKOK OFFICE (REPRESENTATIVE OFFICE)
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Unit 4703, 47th FL., 1 Empire Tower, South Sathorn
Phone : +604-619-2564
Fax : +604-619-2574
Road, Yannawa, Sathorn, Bangkok 10120 Thailand
Phone : +66-2-686-1255
http://www.hirose.com/sg/
http://www.hirose.com/sg/
Fax : +66-2-686-3433
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 1/2015. Contents are subject to change without notice for the purpose of improvements.
12
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明