MS-162-HRMJ-H1 [HRS]
Miniature Interface Coaxial Switch, DC to 10 GHz;
| 型号： | MS-162-HRMJ-H1 |
| 厂家： | 
HRS |
| 描述： | Miniature Interface Coaxial Switch, DC to 10 GHz |
| 文件： | 总8页 (文件大小：349K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Miniature Interface Coaxial Switch, DC to 10 GHz
MS-162B Series
■Overview
Designed to be used as the interface antenna
connection for portable terminal devices as well
as circuit testing on microwave boards (DC to
10GHz) the coaxial switch offers high performace,
low loss, extremely high durability and reliability,
in a small and lightweight package.
Normally closed, the circuit is re-directed to the
plug side by the mating of the plug with the
receptacle.
Features
Comparison with the existing MS-147
1. Wide frequency range
MS-147
MS-162B
Applicable frequencies range from DC to 10 GHz.
N;ddieg^ci
2. Low insertion loss
2
2
39.6mm
14.0mm
0.15 dB MAX (DC to 2 GHz)
+#%
)#%
0.2 dB MAX (2 GHz to 3 GHz)
0.4 dB MAX (3 GHz to 6 GHz)
0.7 dB MAX ( 6 GHz to 10 GHz)
(NORMALLY CLOSED)
*#)
(#*
3. Space-saving design
3.5 mm x 3.1 mm occupied board space.
4. Low profile
65% saving of space
2.5 mm max. protrusion above the board.
N=Z^\]i
5. Lightweight
0.043 g. total weight
6. Durability
12, 000 mating/unmating cycles, with corresponding
plug.
36% lower profile
NLZ^\]i
7. Board placement with automatic equipment.
0.11g
0.043g
Packaged on tape-and-reel.
8. Self alignment
61% lighter weight
When mating, plug and receptacle will self align in
horizontal axis within 0.5mm.
*
9. Beryllium, Halogen-free
●Plugs
●SMA conversion adapter
All materials and substances used to produce this
product comply with Halogen and Beryllium-free
standards.
*As defined by IEC61249-2-21
Br-900 ppm maximum, Cl-900 ppm maximum,
Cl+Br combined-1,500 ppm maximum.
MS-162-C(LP)-1
MS-162-HRMJ-1
MS-162-HRMJ-H1
1
2014.11w
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
■Product Specifications
NORMALLY OPEN (N.O)
*Plug: MS-162-HRMJ-1
NORMALLY CLOSED (N.C)
Operating temperature range
Rated power
–40ç to +85ç
4W
Frequency range
DC to 10GHz
1.2 max.
1.5 max.
1.7 max.
(DC to 3GHz)
(3GHz to 6GHz)
(6GHz to 10GHz)
1.2 max.
1.6 max.
1.7 max.
(DC to 3GHz)
(3GHz to 6GHz)
(6GHz to 10GHz)
V.S.W.R.
0.15 dBmax. (DC to 2GHz)
0.20 dBmax. (2GHz to 3GHz)
0.40 dBmax. (3GHz to 6GHz)
0.70 dBmax. (6GHz to 10GHz)
0.2 dBmax.
0.3 dBmax.
0.5 dBmax.
0.7 dBmax.
(DC to 2GHz)
(2GHz to 3GHz)
(3GHz to 6GHz)
(6GHz to 10GHz)
Insertion loss
25 dBmin.
20 dBmin.
14 dBmin.
12 dBmin.
(DC to 1GHz)
(1GHz to 3GHz)
(3GHz to 6GHz)
(6GHz to 10GHz)
Isolation
———————
Specification
Item
Conditions
1. Contact resistance
2. Insulation resistance
3. Withstanding voltage
100 mø max.
100 mA
100 V DC
100 V AC / 1 minute
Frequency 10 to 55 Hz
1000 Mø min.
No flashover or insulation breakdown
2
4. Vibration
No electrical discontinuity of 1 µs or more
Single amplitude 0.75mm or 98 m/s , 1 octave/min,
10 cycles for each 3 directions.
2
5. Shock
No electrical discontinuity of 1 µs or more
490 m/s at 3 times for 3 directions.
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
Contact resistance: 100 mø max.
Insulation resistance: 10 Mø min.
Temperature: –55ç/+15ç to +35ç/+85ç/+15ç to +35ç
6. Thermal shock
Time: 30
/+2~3 /+30 / 2~3 (Minutes) Under 100 cycles
7. High temperature
exposure
96 hours at 85ç
8. Low temperature
exposure
96 hours at -55ç
9. Humidity
96 hours at of 40ç, RH of 90% to 95%
10. Durability
(mating/un-mating, with Contact resistance: 100 mø max.
12, 000 cycles
corresponding plug)
■Materials
Material
Brass
Finish
Remarks
Part
Shell
Gold plated
——————
UL94V-0
Insulators
LCP
——————
Common terminal
Antenna terminal
Copper alloy
Phosphor bronze
Partially gold plated
Partially gold plated
——————
——————
2
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
(#*
■Receptacle
7
¢'#-
&
%#+'
8
<
%#(
<
6
Part No.
HRS No.
358-0343-9
Packaging
3,000 pcs/reel
%#)
MS-162B
BPCB mounting pattern and metal mask dimensions
PCB mounting pattern
Metal mask dimensions (t=0.12mm)
4
4
2.4
2.4
0.6
0.6
0.5
0.62
0.5
0.62
area show the conductive pattern prohibited area.
BCircuit diagram
NORMALLY CLOSED (N.C)
NORMALLY OPEN (N.O)
<
<
6
8
<
<
6
8
7
7
<
<
<
<
Eaj\
BH"&+'7
Eaj\
BH"&+'7
BPackaging Specifications
8
4
● Reel dimensions
2
Unreeling direction
Unreeling direction
3
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
■Plug
13.7
10.2
Part No.
MS-162-C(LP)-1
HRS No.
358-0222-4
Ø4
Applicable cable: 1.5D-HQEW, 1.5D-QEW (Fujikura Ltd.)
Cable termination tool : Outer conductor HT303/PO-P-2-T(substitute for PO-P-2-T), Cover setting tool UM-T-1
■SMA conversion adapter
1/4-36UNS-2A
Ø4
Part No.
MS-162-HRMJ-1
MS-162-HRMJ-H1
HRS No.
358-0210-5
358-0221-1
Simplified lock
–
YES
4
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
BRecommended Temperature profile
●Typical Solder Paste
●Typical Lead-free Solder Paste
EZV`ꢀiZbeZgVijgZꢀbVm^bjbꢀd[ꢀ')%
Peak temperature maximum of 260ç
IZbeZgVijgZꢀꢁꢂ
Temperature (ç)
5 sec. max.
&%ꢀhZX#ꢀbVm#
260
')%
'%%
&+%
220
200
180
&*%
&%%
%
100
0
I^bZꢀꢁhZX#ꢂ
*%ꢀhZX#ꢀbVm#
Time (sec.)
50 sec. to 80 sec.
)%ꢀhZX#ꢀb^c#
120 sec. max.
Maximum temperature
Peak temperature
Peak temperature time
200ç min.
: 240ç
Maximum temperature
Peak temperature
Peak temperature time
220ç min.
: 260ç
q
w
e
r
t
q
w
e
r
t
: 200ç to 240ç
: 10 sec. max.
: 50 sec. max.
: 40 sec. min.
: 240ç to 260ç
: 5 sec. max.
: 50 sec. to 80 sec.
: 120 sec. max
150ç to 160ç
180ç to 200ç
BRecommended Nozzle Dimensions
BHigh Frequency Characteristics (Typical)
Ø1
Ø1.5
●NORMALLY CLOSED(N.C)
Ø3
[dB]
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
INSERTION LOSS
V.S.W.R.
2.0
[GHz]
10
0
2
4
6
8
FREQUENCY
●NORMALLY OPEN(N.O)
[dB]
0.0
0
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
10
20
30
40
INSERTION LOSS
ISOLATION
1.4
V.S.W.R.
1.2
1.0
[GHz]
10
[GHz]
10
0
2
4
6
8
0
2
4
6
8
FREQUENCY
FREQUENCY
5
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
BExample of Application
Instralled in portable devices
D"g^c\
Note 1: When mounting the MS-162-C(LP)-1 make sure that the
recommended self alighment distances and angle can be
maintained.
F
F
Note 2: When fully mated the spring rfoce
must be 10N to 15N.
Installed in test fixture
;adVi^c\ꢀbdjci^c\ꢀeaViZꢀꢁEaj\ꢀh^YZꢂ
GZiV^c^c\ꢀeaViZ
Bdjci^c\ꢀhXgZl
EgZhhjgZꢀeaViZꢀbdkZhꢀkZgi^XVaan
K^Zlꢀ6
6
F
F
I^ai
BH"&+'"8ꢁAEꢂ"&
8VWaZꢀiZgb^cVi^dc
egZkZci^dc
AdVY
To measuring
AdVY
Bdjci^c\ꢀhXgZl
GZiV^c^c\ꢀeaViZ
instrument
%#*b^c#
8aZVgVcXZ
Hide
7dVgY
BH"&+'"8ꢁAEꢂ"&
BH"&+'7
I]ZꢀgZiV^c^c\ꢀeaViZꢀXVccdiꢀegdigjYZ
VcYꢀ^ciZg[ZgZꢀl^i]ꢀi]ZꢀXVWaZꢀiZgb^cVi^dcꢀVgZVh#
HZa["XZciZg^c\
%#*b^c#
8aZVgVcXZ
Note 1: When mounting the MS-162-C(LP)-1 make sure that the recommended self alighment distances and angle can be
maintained.
F
Note 2: When fully mated the spring rfoce
must be 10N to 15N.
Axial misalignment distance
Allowable angular misalignment for mating
2.5ꢀ
0.5mm
Plug
MS-162-C(LP)-1
Receptacle
This value is the allowable amount of angle deviation at which the plug can be inserted until it is guided by the receptacle and the tapered
portion of the plug.
In the mating process, the plug must be pressed perpendicularly with springs through a floating mechanism.
6
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
BPrecautions
1. This product does not support washing process.
2. When designing your device, considerations should be made to protect this part from
the mechanical stress when the device is dropped.
3. Do not hand-solder the receptacles. This process may lead to solder and flux wicking
into the contact areas.
4. When using a heat gun, hot plate, or similar methods, limit the temperature to 260ç
applied for 10 seconds max. Exceeding these conditions might melt the resin and
deform the connector.
5. When mounting to the PCB, please use the recommended mounting pattern and metal
mask dimensions. Not doing so may cause solder and flux wicking that will cause
failures in the connector.
6. Please refrain from using the product in environments specifically affected by dust, high
humidity, gases, very high temperatures and very low temperatures.
7. When used as an RF interface of a portable terminal, consider using a rubber cap or
other means of protection against intrusion of dust, dirt or other harmfull elements.
8. When using, assure that the plug is fully inserted to the surface (P), as shown below.
P
7
MS162B Series●Miniature Interface Coaxial Switch, DC to 10 GHz
USA:
USA:
USA:
HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS
HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE HIROSE ELECTRIC (U.S.A.), INC. CHICAGO OFFICE
2688 Westhills Court, Simi Valley, CA 93065-6235 3255 Scott Boulevard, Building 7, Suite 101 580 Waters Edge Lane, Suite 205 Lombard IL
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hirose.com/us/
Santa Clara, CA 95054
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hirose.com/us/
60148
Phone : +1-630-282-6706
Mail : inquiries@hirose.com
http://www.hirose.com/us/
USA:
THE NETHERLANDS:
GERMANY:
HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) HIROSE ELECTRIC EUROPE B.V.
37677 Professional Center Drive, Suite #100C Hogehillweg #8 1101 CC Amsterdam Z-O
HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.com/eu/
Livonia, MI 48154
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hirose.com/eu/
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hirose.com/us/
GERMANY:
UNITED KINGDOM:
CHINA:
HIROSE ELECTRIC EUROPE B.V. NUERNBERG OFFICE HIROSE ELECTRIC EUROPE BV (UK BRANCH)
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
http://www.hirose.com/eu/
Fax : +86-21-6391-3335
http://www.hirose.com/eu/
http://www.hirose.com/cn/
CHINA:
CHINA:
HONG KONG:
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
A1001, Ocean International Center, Building 56# East 4th Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose.com/cn/
http://www.hirose.com/cn/
http://www.hirose.com/hk/
TAIWAN:
KOREA:
SINGAPORE:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose.com/cn/
HIROSE KOREA CO., LTD.
HIROSE ELECTRIC SINGAPORE PTE. LTD.
1261-10, Jeoungwhang-Dong, Shihung-City, 10 Anson Road #26-1, International Plaza
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr/
079903, Singapore
Phone : +65-6324-6113
65-6324-6123
Fax : +
http://www.hirose.com/sg/
INDIA:
INDIA:
MALAYSIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. (REPRESENTATIVE OFFICE)
Office NO.519, Regus-Green Boulevard, Level5, Tower C, Unit No.03, Ground Floor, Explorer Building International Tech 1-10-07, Suntech @ Penang Cybercity (1164),Lintang
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Park Whitefield Road, Bangalore 560066 Karnataka, India
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.
Phone : +604-619-2564
Fax : +604-619-2574
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose.com/sg/
http://www.hirose.com/sg/
®
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
+
+
TEL: 81-45-620-3526 Fax: 81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2014. Contents are subject to change without notice for the purpose of improvements.
8
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明