NX60TB-15SAA9-SP(51) [HRS]
Telecom and Datacom Connector;
| 型号： | NX60TB-15SAA9-SP(51) |
| 厂家： | 
HRS |
| 描述： | Telecom and Datacom Connector 连接器 |
| 文件： | 总16页 (文件大小：606K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
NEW
I/O Card Interface Connectors
NX Series
3. ESD Secure
Thermoplastic molded covers assures insulation
of the connections and shields from ESD.
4. Secure Latching
A built-in latch assures correct and secure
mating of connector.
5. Reliable Conductor Termination
Reliable termination of conductors is
accomplished by proven IDC termination.
6. Sequential Mating
The 0.8mm pitch contacts are engaging the
corresponding parts in sequence: Ground-
Power & Signal
7. Rugged Construction
Securely attached to the board with optional
screws.
■Features
1. Low Profile
8. Card Frame Kits
Protorusion above the PCB board is only 2.9mm, and the
connectors can be mounted to type I and II I/O cards.
Available as a separate part number.
9. Secure Attachment to Frame Kit.
Compliant mounting bracket attaches the
connectore directly to the frame kit.
2. EMI/RFI protection
Full metal shielding. Shield connects first, ahead of
contacts.
■Applications
Used with I/O cards, portable personal computers,and the external connections of various small-sized portable
terminals.
■Specifications
Current
0.5 A
Operating temperature
Operating humidity
-30ç to +70ç (Note 1) Storage temperature range -10ç to +60ç (Note 2)
Ratings
95% R.H. or less
(No condensation)
Voltage
125 V AC
Storage humidity range
40 to 70% (Note 2)
Item
Requirements
Conditions
1. Insulation resistance
2. Voltage proof
Measured at 100 V DC
250 Mø or greater
300 V AC for 1 minute
Measured at 100 mA
No flashover or breakdown
3. Contact resistance
40 mø or less (initial value) (Note 3)
No electrical discontinuity for 10µs or
greater
Frequency of 10 to 55 Hz, amplitude of 0.75 mm,
3 directions, 2 hours each
4. Vibration
Temperature of 40ç 2ç, humidity of 90 to 95%,
duration 96h
5. Humidity resistance
Insulation resistance: 250 Mø or greater
6. Rapid change
of temperature
No damage, cracks, or defects at any
part
-55ç, 30 min./15 to 30ç, within 5 min/85ç, 30 min
/15 to 35ç, within 5 min, for 5 cycles
7. Insertion and
withdrawal life
Change of contact resistance from the
start should be 60 mø or less
3,000 times
Reflow: at the recommended temperature profile
8. Resistance to
soldering heat
No melting of resin portions which affect
performance
Soldering iron temperature: 300ç for 3 seconds
Note 1 : Includes temperature rise when conducting.
Note 2 : The term storage refers to an unused products prior to boards mounting (including packing materials) that is being kept for
a long period.
The operating temperature and humidity range are applied to the non-conducting condition following board assembly.
Note 3 : The aforementioned specifications are representative of this series. For information on specific parts, confirm with Sales Office.
B8
■MATERIALS AND FINISH
B
Suitable Cable
Main Materials Used
I/O cable
Insulator
Contacts
Shell
Thermoplastic Compound ■Black
Center conductor
AWG # 28(7/0.127)
Copper alloy
Steel (Note)
Stainless steel
Selective gold plating
Receptacle
connectors
Shielding outer
diameter
0.58mm
0.62mm
UL2990
Solder Plating
Latch
-
UL20276 and
UL2789
Cable style
Insulator
Contacts
Cover case
Shell
Thermoplastic Compound ■Black
Plug unit
Copper alloy
Partial gold plating
Thermoplastic Compound ■Black
Stainless Steel
Plug cover
-
Frame
Thermoplastic Compound ■Black
Frame ground
terminal
Phosphor bronze
Gold Plating
Frame kit
Spring pin
Cpil spring
Stainless steel
Stainless steel
-
-
Thermal adhesive
tape attached
Panel
Stainless steel
Note : The 0.3mm offset type and those used for equipment interfaces are made of
stainless steel.
■UL94V-0
■Product Number Configuration
■Receptacle
NX 60 T A - 15 S AA 9 - SP
1
2
3
11
5
6
7
8
9
■Plug
NX 30 T A - 15 P AA
1
2
3
4
5
6
7
■Plug Covers
NX - 15 T A - CV
1
5
3
11
10
■Frame Kits
NX - 15 T - KT 9 (05)
1
5
3
10
8
12
■Panel (With 9, 15, or 25 contacts)
NX T - P (05)
1
3
10
12
(With 32 contacts)
NX - 32 T - P (05)
1
5
3
10
12
B9
B
Dimen
B
Recommended Board Dimensions
(Board Thickness: 0.5 mm Maximum)
Unit: mm
offset
0.9
Product No.
HRS No.
Number of contacts
A
B
C
D
NX-09T-KT9 CL234-0010-8
NX-15T-KT9 CL234-0011-0
NX-25T-KT9 CL234-0012-3
NX-32T-KT9 CL234-0026-8
NX-09T-KT3 CL234-0034-6
NX-15T-KT3 CL234-0035-9
NX-25T-KT3 CL234-0036-1
NX-32T-KT3 CL234-0054-3
09
15
25
32
09
15
25
32
26.4 25.0 22.4 06.4
31.2 29.8 27.2 11.2
39.2 37.8 35.2 19.2
44.8 43.4 40.8 24.8
26.4 25.0 22.4 06.4
31.2 29.8 27.2 11.2
39.2 37.8 35.2 19.2
44.8 43.4 40.8 24.8
0.9
0.9
0.9
0.3
0.3
0.3
0.3
B10
■RECEPTACLE CONNECTORS
■0.9 mm offset type
CL234-0004-5
NX60T-■■SAA9-SP
Unit: mm
C D
Product No.
HRS No.
Number of contacts
A
B
NX60TA-09SAA9-SP CL234-0106-5
NX60TB-15SAA9-SP CL234-0097-6
NX60TA-25SAA9-SP CL234-0107-8
NX60T0-32SAA9-SP CL234-0023-0
09
15
25
32
25.2 19.7 17.2 06.4
30.0 24.5 22.0 11.2
38.0 32.5 30.0 19.2
43.6 38.1 35.6 24.8
■0.3 mm offset type
CL234-00032-0
NX60TA-■■SAA3-SP
Unit: mm
Product No.
HRS No.
Number of contacts
A
B
C
D
NX60TA-09SAA3-SP CL234-0031-8
NX60TB-15SAA3-SP CL234-0098-9
NX60TB-25SAA3-SP CL234-0033-3
NX60TA-32SAA3-SP CL234-0053-0
09
15
25
32
25.2 19.7 17.2 06.4
30.0 24.5 22.0 11.2
38.0 32.5 30.0 19.2
43.6 38.1 35.6 24.8
B11
■PLUG UNITS
NX30TA-15PAA
CL234-0005-8
Unit: mm
A B
Product No.
HRS No.
Number of contacts
09
15
25
32
14.6
19.4
27.4
33.0
14.1
18.9
26.9
32.5
NX30TA-09PAA
NX30TA-15PAA
NX30TA-25PAA
NX30TA-32PAA
CL234-0002-0
CL234-0005-8
CL234-0008-6
CL234-0024-2
■INNER LATCH PLUG
HOUSING
NX-15T-CV
CL234-0006-0
Unit: mm
Product No.
NX-09T-CV
NX-15T-CV
NX-15T-CV1
NX-25T-CV
NX-25TA-CV1
NX-32TA-CV1
HRS No.
Number of contacts
A
B
C
D
E
F
G
Outer diameter of cable
less than Ø 5.5
CL234-0003-2
CL234-0006-0
CL234-0017-7
CL234-0009-9
CL234-0039-0
CL234-0025-5
09
15
15
25
25
32
18.2 21.2 14.0 26 06.0 5.5 6.5
23.0 26.0 18.8 28 07.0 6.0 7.0
23.0 26.0 18.8 28 05.0 4.0 5.0
31.0 34.0 26.8 30 08.0 6.5 7.5
31.0 34.0 26.8 32 13.0 4.0 5.0
36.6 40.6 32.4 32 16.2 4.2 5.0
less than Ø 6.0
less than Ø 4.0
less than Ø 6.5
less than Ø 6.5(Note)
less than Ø 7.5(Note)
Note: Designed for flat cable use. when round cable is used, clamp portion shall be made flat, adjusting exclusive use bushing.
B12
Frame
Cover
■FRAME KIT
■(Frame + 2 X Cover Panel
NX-15T-KT9
CL234-0011-0
Unit: mm
Back Connector
Connectors for the card Side(Note 1)
Product No.
HRS No.
Number of contacts
Product No.
HRS No.
Offset
NX-09T-KT9
NX-15T-KT9
NX-25T-KT9
NX-32T-KT9
NX-09T-KT3
NX-15T-KT3
NX-25T-KT3
NX-32T-KT3
CL234-0010-8
CL234-0011-0
CL234-0012-3
CL234-0026-8
CL234-0034-6
CL234-0035-9
CL234-0036-1
CL234-0054-3
09
15
25
32
09
15
25
32
NX60TA-09SAA9-SP
NX60TB-15SAA9-SP
NX60TA-25SAA9-SP
NX60TA-32SAA9-SP
NX60TA-09SAA3-SP
NX60TB-15SAA3-SP
NX60TA-25SAA3-SP
NX60TA-32SAA3-SP
IC1F-68RD-1.27SFA
CL640-0040-3
0.9mm
IC1F-68RD-1.27SFA
CL640-0035-3
0.3mm
■FRAME ONLY
NX-15T-F9
CL234-0019-2
Unit: mm
Product No.
HRS No.
Number of contacts Connectors for the card Side
Back Connector
NX60TA-09SAA9-SP
Panel
Coil Spring
NX-CSA
Offset
NX-09T-F9 CL234-0018-0
NX-15T-F9 CL234-0019-2
NX-25T-F9 CL234-0020-1
NX-32T-F9 CL234-0063-4
NX-09T-F3 CL234-0060-6
NX-15T-F3 CL234-0061-9
NX-25T-F3 CL234-0062-1
NX-32T-F3 CL234-0067-5
09
15
NX60TB-15SAA9-SP NXT-P
NX60TA-25SAA9-SP
IC1F-68RD-1.27SFA
25
0.9mm
32
09
NX60TA-32SAA9-SP NX-32T-P
NX60TA-09SAA3-SP
NX-CSA
&
15
NX60TB-15SAA3-SP NXT-P
NX60TB-25SAA3-SP
IC1F-68RD-1.27SFA
25
0.3mm
NX-CSB
32
NX60TA-32SAA3-SP NX-32T-P
B13
NXT-P
CL234-0058-4
Unit: mm
Panel Finish
Product No.
NXT-P
HRS No.
Number of Frame contacts
CL234-0058-4
CL234-0058-4-05
CL234-0059-7
CL234-0059-7-05
Silver matt finish
9, 15, 25
NXT-P(05)
NX-32T-P
NX-32T-P(05)
Dull processing material
Silver matt finish
32
Dull processing material
NXT-PA
CL234-2011-1
Product No.
NXT-PA
HRS No.
Number of Frame contacts
Panel Finish
Silver matt finish
CL234-2011-1
CL234-2011-1-05
CL234-0068-8
CL234-0068-8-05
9, 15, 25
NXT-PA(05)
NX-32T-PA
NX-32T-PA(05)
Dull processing material
Silver matt finish
32
Dull processing material
■ Panels are avilable in two types: a 32-contact special type and a common type with 9, 15, or 25 contacts.
■ Ordering volume for panels is one panel per unit volume.One frame corresponds to 2 panels.
B14
■GROUND CONTACT SPRING
■BUSHING
NX-CSA
NX-32T-BS
CL234-0042-4
CL234-0055-6
Product No.
NX-CSA
HRS No.
Offset: Ordering Volume
Product No.
HRS No.
Number of contacts
NX-25T-BS CL234-0074-0
NX-32T-BS CL234-0055-6
25
32
0.3mm: One Pack
0.9mm: Two Packs
CL234-0042-4
CL234-0043-7
NX-CSB
0.3mm: Two Packs
Sold in package of 1000 pcs.
For 1,000 frames of 0.9 offset, please order two packs of NX-CSA.
For 1,000 frames of 0.3 offset, please order one pack of NX-CSA
and one pack of NX-CSB.
Applications for Connections of I/O Card Connectors
■MODULAR PLUGS FOR ROUND CABLE (AWG #28) CONNECTOR
Modular Plug
Manual Wiring Tool
No. of contacts
Product No.
HRS No.
Product No.
HRS No.
6
8
TM30P-66P
TM30P-88P
CL222-2684-2 TC1-TM30P-66P CL250-0145-6
CL222-2685-5 TC1-TM30P-88P CL250-0146-9
6 Contacts
8 Contacts
■8-CONTACT ADAPTER
Lead Number Reference Table
TM5RL-88-JJ
CL222-3798-7
Connector (a) Contact number TM5RL-88 1
Connector (b) Contact number TM5RL-88 1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
B15
■RECEPTACLES FOR USE WITH EQUIPMENT INTERFACES
NX60T-9SAA-SH
CL234-0040-9
Unit: mm
C D
Product No.
HRS No.
Number of contacts
A
B
NX60T-09SAA-SH CL234-0040-9
NX60T-25SAA-SH CL234-0027-0
09
25
15
17.2 08.7 12.3 06.4
30.0 21.5 25.1 19.2
22.0 13.5 17.1 11.2
NX60T-15S-SH
CL234-0046-5
B
Recommended Land Dimmensions
Unit: mm
Product No.
HRS No.
Number of contacts
A
B
C
D
E
F
NX60T-09SAA-SH CL234-0040-9
NX60T-25SAA-SH CL234-0027-0
09
25
15
06.4 12.3 16.9 08.7 15.6 18.2
19.2 25.1 29.7 21.5 28.4 31.0
11.2 17.1 21.7 13.5 20.4 23.0
NX60T-15S-SH
CL234-0046-5
Note 1: Unless otherwise noted, the dimension tolerance should be kept to 0.1 or less.
Note 2: The diameter of screw head should be less than 3.5 mm when the connector is fixed.
B16
B
Plug Termination Sequence
■Fixtures
Cable wiring cradle
Cutting and IDC termination
Cutting and IDC termination
attachment fixtures
NX/3230-CAT
CL902-0250-4
Fixture main unit
NX/3230-HP
CL902-0252-0
NX30TA-9GP
CL902-0253-2
NX30TA-15GP
CL902-0254-5
NX30TA-25GP
CL902-0255-8
NX30TA-32GP
CL902-0257-3
■Wiring Sequence
■
■
■
1. Set the wires in the wiring
fixtures.
2. Align holding plates (A) and
(B).
3. Arrange the wires one at a time
through holding plates (A) and
(B).
■
■
■
4. Set holding plates (A) and (B)
onto the guide plate.
5. Insert the guide plate into the
pressure welding and cutting
fixtures.
6. Pull down the handle. The
wiring and cutting of excess
cable length are completed.
B17
B
Frame Kit Fixture
Ground spring press fitting fixture
Special blocks
A frame kit thermal fixture and a cooling fixture are also available.
B
Wiring Fixture and Accessories List
Plug
Process
Pressurs Welding and Cutting
Press
Cable
Connector
Shield Case Caulking
Wiring
Hood Fitting
Manual Work
Guide Plate Cover Case
Hand Tool
NX-30TA-9HC
CL902-0260-8
NX-09T-CV0
NX30TA-09PAA
NX30TA-15PAA
NX30TA-09GP
NX-30TA-15HC
CL902-0261-0
NX-30TA-15HC1
CL902-0262-3
NX-15T-CV0
NX-15T-CV1
NX/3230-CAT
NX30TA-15GP
I/O Cable
Discrete cable
(All contacts NX/3230-HP
common)
NX-30TA-25HC1
CL902-0263-6
NX-25T-CV
NX30TA-25PAA
NX30TA-32PAA
NX30TA-25GP
NX30TA-32GP
NX-32T-CV1
Screw Fixing
Note 1: The caulking height of hand tool is defined by follwing cable specifications.
Note 2: Caulking specification change is needed when special cable is used.
Cover Case
NX-9T-CV
Cable Diameter
Ø 5.1 0.2
Strand Termination
Fold the shield and bind 1.5 times with copper tape.
NX-15T-CV
NX-25T-CV
NX-15T-CV1
Do,
Do,
Ø 5.7 0.2
Ø 6.5 0.2
Crimp with cable sheath directly.
Ø 3.8 0.2
Frame Kit
Process
Frame Kit
Spring Pin Press Fitting
Panel Thermal
Caulking
Panel Cooling
Press
Unit
NX-SPT-9
NX-9T-KT(9•3)
NX-15T-K(9•3)
NX-25T-K(9•3)
NX-32T-KT(9•3)
CL902-0275-5
NX-SPT-15
NX-SPT
CL902-0276-8 NX-PHT
NX-PCT
CL902-0274-2 NX-SPT-25
CL902-0277-0
CL902-0282-0 CL902-0283-3
NX-SPT-32
CL902-0278-3
B18
Back Connectors for Type II I/O Cards
■NX Series 68
■Features
1. Low profile
Receptacle connectors have a mounting height of 3.5
mm and can be mounted to type II I/O cards.
2. Shielded construction
A metal shell is used for shielding.
3. ESD protection
The use of an over-mold cover offers excellent ESD
protection.
4. More efficient wiring work
Wiring on the plug side uses AWG #30 pressure welding
(discrete type) for more efficient wiring work.
■Applications
I/O card interfaces.
■Performance
Item
Requirements
0.5A
Test Conditions
B
Suitable Cable
1. Rated current
2. Rated voltage
per pin
per pin
125 V AC
I/O Cable
AWG #30 (7/0.1)
0.5mm
3. Insulation resistance 250 Mø or more Measured at 100 V DC
Conductor size
Insulator outer diameter
Cable style
Conduction for one minute. No
flashover or breakdown.
4. Voltage proof
300 V AC
UL20276
5. Contact resistance 40 mø or more Measured at 100 mA
6. Mechanical operation 3000 times
Contact resistance of 60 mø or less
■Materials and Processing
Item
Material
Color/Finish
Black
Notes
UL94V-0
----------
Insulator
Synthetic resin
Copper alloy
Receptacle connector
Contacts
Shell
Partial gold plating
Solder plating
Black
Stainless steel
Synthetic resin
Copper alloy
----------
Insulator
Contacts
Cover case
Shell
UL94V-0
----------
Plug unit
Partial gold plating
Black
Synthetic resin
Stainless steel
Synthetic resin
Phosphor bronze
Stainless steel
Stainless steel
Stainless steel
UL94V-0
----------
Plug cover
----------
Frame
Black
UL94V-0
----------
FG terminal
Spring pin
Coil spring
Panel
Gold plating
----------
Frame kit
----------
----------
----------
With thermal adhesive tape
----------
■Product Number Composition
1
2
Series name:NX
■Receptacle connector
Wiring style 30: Loose lead pressure welding type (for fine wire)
60: SMT type
NX 60 H - 68 S 9 - SP
1
2
3
4
5
6
7
3
4
5
Serial symbol for form
■Plug unit
Number of contacts: 68
NX 30 H - 68 P
Type of opening S: Receptacle
P: Plug
1
2
3
4
5
■Plug cover
6
7
8
Coplanarity: 0.9 (Dimension from connector center to board mounting position)
Variations SP: Spring pin (for cards)
Type of accessories CV: Vertical opening cover case
KT: Frame kit
NX - 68 H - CV
1
4
3
8
■Frame kit
NX - 68 H - KT 9 (05)
9
Panel finish (05): Matt processing
1
4
3
8
6
9
B19
■Receptacle Connector
+0.1
Note 1: The signal pin SMT dimension of this product is 0-0.05
.
Note 2: Caulking specification change is needed when special cable is used.
Product number
NX60H-68S9-SP
HRS No.
CL234-0078-1
■Plug Unit
Product number
NX30H-68P
HRS No.
CL234-0079-4
B20
■Plug Cover
Product number
NX-68H-CV
HRS No.
CL234-0080-3
■Frame Kit
Main unit
Panel
Note 1: Suitable connectors for portion A are IC1F-68RD-1.27SFA.
Suitable connectors for portion B are NX60H-68S9-SP.
Product number
NX-68H-KT9(05)
HRS No.
CL234-0081-6-05
B21
B
Recommended Board Dimensions (Suitable Board Thickness: 0.5 mm MAX)
Note 1: Suitable connectors for portion A are IC1F-68RD-1.27SFA.
Suitable connectors for portion B are NX60H-68S9-SP.
B
Connector Mounting Dimensions
B22
BRecommended Solder Temperature Profile
■ Applicable conditions
Reflow method
Solder type
: IR reflow
: Cream type 63 Sn/37 Pb
(Flux component of 9 wt%)
Test substrate
: Glass epoxy 47 X 77.3 X 0.5 mm
Metal mask thickness
: 0.15 mm
■ Conditions may change and are dependent on type and
thickness of Solder.
B23
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明