TM11APA-82P [HRS]
Telecom and Datacom Connector, 2 Contact(s), Male, Plug;型号: | TM11APA-82P |
厂家: | HRS |
描述: | Telecom and Datacom Connector, 2 Contact(s), Male, Plug |
文件: | 总7页 (文件大小:106K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
M ODULAR PLUG-JACK CONNECTORS
■
GENERAL
Developed by W estern Electric Inc. in the U.S., the TM Series are telephone connectors m anufactured by us under a patent
license from the com pany.
Com plying with the Federal Com m unications Com m ission (FCC) Title 47, Part 68, Subpart F Standard, the TM Series are easy to
operate and resistant to harsh environm ental conditions. They are available in a variety of m odels for prevention of EM I on plugs
and jacks and form odem conversion, so they can be used fortelephones, radio equipm ent, and com puter-related applications.
■
FEATURES:
(1) Easy to operate. Can be locked by a single operation.
(2) The gold-plated contacts are highly resistantto adverse environm entalconditions.
(3) Require m inim alspace forinstallation, being designed forlightweightand com pactsize.
(4) A variety ofjacks are available such as wire lead type, DIP, and EM I-protected to m atch the requirem ents ofyourequipm ent.
(5) Plugs are available forround cables and shielded cables in addition to copper-foilflatm ulti-conductortelephone cables.
(6) Specialhand wiring tools forplug harnesses available.
(7) M odularconnectors are available forRS-232C m odem conversion forcom m unications between com puters.
(8) Eight-core plugs and jacks com ply with ISO 8877 Standard
(ISDN interface connector)
■
M AIN APPLICATIONS
Single-line telephones, electronic key telephone system s, m obile telephones, radio equipm ent, intercom s, portable term inals, fax
m achines, com puterterm inals, and m easuring instrum ents.
-3-
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
■
M ODULAR CONNECTOR TERM INAL NUM BERS
Unless otherwise specified, see the figures below forthe term inalnum bers ofthe product.
Jack
Plug
(m ating face)
Contact
No.8
Contact
No.1
Contact
No.1
Contact
No.8
■
OPENING SIZE AND NUM BER OF CONDUCTORS (6-CONDUCTOR)
See the figures below forthe relationship between the opening size and the num berofconductors ofthe jack connectors.
M odel66
M odel64
M odel62
M odels 64 and 62 are obtained by rem oving 1 pin and 2 pins, respectively, from both sides of m odel 66. For details, please contact
us fordrawings because only standard m odels are shown in the catalogs.
■
RECOM M ENDED SOLDERING FOR M ODULAR DIP CONNECTORS
●
Flow solder (autom atic soldering m achine)
Pre-heat:
90 - 130 ℃
Pre-heat tim e:
Solder tem perature:
Soldering tim e:
60 seconds m axim um
240 - 260 ℃
10 seconds m axim um
●
Hand soldering
Soldering iron tip tem perature: 350 ℃
Soldering tem perature:
Soldering iron output:
5 seconds m axim um
30 - 40W
Note: W hen soldering, use care not to apply excessive force to the connector term inals.
●
Recom m ended Solder com position: Paste, 96.5% Sn/3.0% Ag/0.5% Cu
-4-
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
ULSTANDARDS FOR M ODULAR CONNECTORS
These connectors m eet the UL1863 Standard (for com m unications circuit accessories) for m odular connectors to prevent injuries,
and achieve betterelectrical, m echanical, and flam e-resistantproperties. UL 1863 provides, forexam ple, the following:
(1) A rubber probe (φ6.9 ± 0.5 m m ) inserted into the connector m ating face shall be able to be pulled out with a force of 4.45 N
orless.
(2) Insulating m aterialsshallbe flam e-resistant(UL94V-0).
Ourm odularconnectorshave recentlyobtained approvalfrom UL asm eeting the requirem entsofthe UL1863.
UL File No. 134282
●
IDENTIFICATION OF CONNECTORS M EETING UL STANDARDS
To discrim inate these m odularconnectors from non-com pliantconnectors, we add "X"to theirpartnum bers.
TM IR-623K64-※※-※
TM 5RE3-64
TM IRX-623K64-※※-※
Authorized UL connector
TM 5RE3X-64
Authorized UL connector
●
UL COVERAGE (JACK W ITH LEAD W IRES)
Only jack connectors with stripped term inal lead wires have been approved by UL. Other connectors and term inals have not been
approved.
Lead wire
Stripped process
●
Authorized UL connectors
Jack
Modular plug
Jack with lead wires
Dip type jack
TM 2REX
TM 1RX-616B-**
TM 1RX-616M -**
TM 1RX-616P-**
TM 1RX-616W -**
TM 1RX-623K-**
TM 1RX-623P-**
TM 1RX-647A -**
TM 2RCX-**
TM 3PX
TM 2REA X
TM 4PX
TM 3RX
TM 8PX
TM 3RA X
TM 10PX
TM 3RA 1X
TM 11A PX-88P
TM 11A PA X-88P
TM 3RA 1X-10**
TM 5RCX
TM 5RE3X
TM 2RGX-**
TM 5RFX
TM 2RDX-**
TM 5RF1X
TM 2RDA X-**
TM 7RX-**
TM 5RJ2X
TM 5RJ3X
TM RA X-**
TM 5RQX-14**
TM 5RQX-20**
TM 5RSA X-24**
TM 5RSBX-24**
TM 13RX
TM 11RX-*88-**
TM 13RA X-10**
TM 11RX-5C-88
・For details, contact our sales representative
-5-
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
■
MODULAR CONNECTOR TERMINAL NUMBERS
Un
■
O)
Se
Models 64 and 62 are obtained by removing 1 pin and 2 pins, respectively, from both sides of model 66. For details, please contact
us for drawings because only standard models are shown in the catalogs.
■
RECOMMENDED SOLDERING FOR MODULAR DIP CONNECTORS
●
Flow solder (automatic soldering machine)
Pre-heat:
90 - 130 ℃
Pre-heat time:
Solder temperature:
Soldering time:
60 seconds maximum
240 - 260 ℃
10 seconds maximum
●
Hand soldering
Soldering iron tip temperature: 350 ℃
Soldering time:
5 seconds maximum
30 - 40W
Soldering iron output:
Note: When soldering, use care not to apply excessive force to the connector terminals.
●
Recommended Solder composition: Paste, 96.5%Sn/3.0%Ag/0.5%Cu
- 4 -
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
M ODULAR PLUGS
■O rdering inform ation
T M
4 P - 6
4 P
(1) (2) (3)(4)
(1) Indication forthe Series
(2) Jack type identification
3, 8p ------Plug forflatcables
4, 10P ----Plug forround cables
11AP ------- EM I-protected plug
11AP1 -----
EM I-protected slenderplug
11APA ----- EM I-protected L-shaped plug
11APA1 ---
EM I-protected T-shaped plug
20P ------- Single-conductorcable plug
(φ0.4, φ0.5, φ0.65 m m )
30P ------- Sm all-diam etercable plug (forAW G28)
(3) Size ofopening
4 ----Forup to 4 single conductors
6 ----Forup to 6 single conductors
8 ----Forup to 8 single conductors
(4) Num berofconductors
2P ---2 conductors
4P ---4 conductors
6P ---6 conductors
8P ---8 conductors
-7-
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
■
ProductSpecifications
Currentrating :0.5A
Voltage rating :125V AC
Plug
Jack
-25℃to + 60℃(Note)
-25℃to + 80℃(Note)
Operating
tem perature
range
Ratings
Specification
2, 4, 6 pos.
Item
Conditions
8 pos.
1. Insulation resistance 100 M ohm sm in.
2. W ithstanding voltage
100 V DC
No flashoverorinsulation breakdown. 500 V AC /one m inute
No flashoverorinsulation breakdown. 1500 V AC /one m inute
200m ohm sm ax. 230m ohm sm ax. 100m A
(between adjacentcontacts)
3. W ithstanding voltage
(between contactsto shield)
4. Contactresistance
Frequency:10 to 55 Hz, single
No electricaldiscontinuityof5μsm in.
am plitude of0.75 m m , 1 octave/
m in. conduct, 2 hoursin each 3
220m ohm sm ax. 250m ohm sm ax.
directions.
5. Vibration
Contact
resistance
Acceleration of490 m /s2,11 m s
No electricaldiscontinuityof5μsm in.
duration, sine half-wave waveform ,
3 cyclesin each ofthe 3 axes.
6. Shock
Contact
resistance
220m ohm sm ax. 250m ohm sm ax.
220m ohm sm ax. 250m ohm sm ax.
220m ohm sm ax. 250m ohm sm ax.
100 M ohm sm in.
7. Durability
(m ating/un-m ating)
Contact
resistance
200 cycles
Tem perature :-55℃→+5℃to
+35℃→+85 ℃→+5℃ to +35℃
Duration :30→5→30→5 (M inutes)
5 cycles
Contact
resistance
8. Tcyecmleperature
Insulation
resistance
Contact
220m ohm sm ax. 250m ohm sm ax.
1 M ohm sm in.
9. Hum idity
resistance
Insulation
resistance
(High hum idity)
Insulation
resistance
(Drystate)
500 hoursat40℃and hum idity
of90% to 95% .
10 M ohm sm in.
Contact
resistance
5% saltwaterfor48 hours
220m ohm sm ax. 250m ohm sm ax.
10. SaltSpray
Note 1 :Includestem perature rise caused bycurrentflow.
Note 2 :The productinform ation in thiscatalog isforreference only. Please requestthe
ꢀꢀꢀ Engineering Drawging forthe m ostcurrentand accurate design inform ation.
-8-
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
CL 222 TM
■
M aterial
●
M odularJacks
Part
M aterial
Finish
Rem arks
UL94V-0
DIP type
W ire lead type
PBT
ABS
Insulator
Contactarea :1.27μm gold
ꢀꢀꢀꢀꢀꢀ plated
Contacts
M etalshield
M etalfitting
Phosphorbronze
Term ination area :gold plated
Tin plated
Tin plated
Copperalloy
Copperalloy
Note :The productinform ation in thiscatalog isforreference only. Please requestthe Engineering
ꢀꢀꢀDrawging forthe m ostcurrentand accurate design inform ation.
●
M odularPlugs
Part
M aterial
Finish
Rem arks
Polycarbonate
Insulator
Contacts
M etalshield
Cover
Color:clear
Contactarea :1.27μm gold
ꢀꢀꢀꢀꢀꢀ plated
Phosphorbronze
Copperalloy
Tin plated
Polycarbonate
Note :The productinform ation in thiscatalog isforreference only. Please requestthe Engineering
ꢀꢀꢀDrawging forthe m ostcurrentand accurate design inform ation.
-9-
相关型号:
TM11APA-88P(03)
Telecom and Datacom Connector, 8 Contact(s), Male, Straight, Crimp Terminal, Plug, ROHS COMPLIANT
HRS
TM11APA1-88P(06)
Plug with EMI protection; HRS No: 222-2783-4 06; No. of Positions: 8; Connector Type: Cable; Contact Gender: Male; Port Style: 8 Pos.; Termination Style: IDC; Current Rating(Amps)(Max.): 0.5; Rated Voltage(VAC): 125; Mating/Unmating Cycles: 200; Operating Temperature Range (degrees C): -25 to 60; Generic Name: RJ-45; General Description: Modular plug; EMI protection; Cover:Black; T-shaped; Only Cover/Cable bushing
HRS
©2020 ICPDF网 联系我们和版权申明