TN-21P-88P(07) [HRS]
Telecom and Datacom Connector, 8 Contact(s), Male, Crimp Terminal, Plug, ROHS COMPLIANT;型号: | TN-21P-88P(07) |
厂家: | HRS |
描述: | Telecom and Datacom Connector, 8 Contact(s), Male, Crimp Terminal, Plug, ROHS COMPLIANT 连接器 |
文件: | 总8页 (文件大小:554K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Modular Plug Connectors Compliant to Enhanced Category 5 Standards
TM21P Series (Shielded Type)
TM22P-88P (Non-shielded Type)
ꢀFeatures
1. Supports High-Speed LAN Transmission
Conforms to requirements of TIA/EIA-568B data
wiring standard, meeting transmission performance
of Enhanced Category 5.
Supports Gigabit Ethernet (1000BASE-T) and Fast
Ethernet (100BASE-TX) high-speed LAN
transmission.
Protected latch tab
2. EMI protection (TM21*P-88P)
360° coverage of the engagement area with a metal
shield assures protection against electromagnetic
interference. When mated with corresponding
connector the shield surfaces are securely
connected to provide continuous circuit.
3. Protected latch tab (TM21P-88P)
Flexible case extends over the release tab
preventing the possibility of breaking-off during
handling of the complete cable assembly.
4. Termination of conductors
1
Self located 24 AWG conductors (solid or stranded)
are terminated against pre-inserted contacts using
simple tooling.
5. Simplified termination (TM21*P-88P)
1
2
Removeable one piece cover allows easy access to
the termination areas.
6. Conforms to the ISO 8877 Standard
(ISDN Interface Connector)
1
ꢀApplications
Telecom Hubs, Routers, Bridges and ATM
Transmission Equipment, Ethernet Switches and
Networking Equipment, Test and Measurement
Equipment and other equipment requiring this type of
simple and reliable connection.
Cover Installation Procedure
2006.8
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀProduct Specification
Current rating 1A
Operating temperature range-25 to +60 (Note)
Rating
ç
ç
Voltage rating 125 V AC
Item
Specification
Conditions
1. Insulation resistance 100 M ohms min.
2. Withstanding voltage
100 V DC
No flashover or insulation breakdown
500 V AC / one minute
(between adjacent contacts)
3. Withstanding voltage
No flashover or insulation breakdown
230 m ohms max.
1500 V AC / one minute
100mA DC
(between contact and shield)
4. Contact resistance
5. Vibration
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours / 3 axis
No electrical discontinuity of 5 ms or more
Contact resistance: 250m ohms max.
2
6. Shock
Acceleration of 490 m/s , 11 ms duration,
No electrical discontinuity of 5 ms. min.
Contact resistance: 250m ohms max.
sine half-wave waveform, 3 cycles in each of the 3 axis
7. Durability
(mating/un-mating)
Contact resistance: 250m ohms max.
200
Temperature: -55ç/+5ç to +35ç/+85ç/+5ç to +35ç
8. Temperature cycle
9. Humidity
Contact resistance: 250 m ohms max.
Insulation resistance: 100 M ohms min.
Duration: 30/5/30/5(Minutes)
5 cycles
Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
500 hours at temperature of 40ç and humidity of 90% to 95%
Insulation resistance: 10 M ohms min. (Dry state)
Contact resistance: 250 m ohms max.
10. Salt Spray
Exposed to density 5% salt water for 48 hours
Note :Includes temperature rise caused by current flow.
ꢀMaterials
Part
Material
Finish
Color: Clear
Remarks
UL94V-2
-------
Insulator
Contacts
Shield
Polycarbonate
Copper alloy
Copper alloy
Polycarbonate
Polyamide
Contact area: Gold plating
Tin plating
-------
Conductor holding tray
Cover
Color: Clear
UL94V-2
UL94V-2
Color: Light beige (Note)
Note :Cover available in various colors. Refer to page 3.
ꢀOrdering information
Plugs- Shielded
ꢀ
Plugs - Non-shielded
ꢀ
TM21 C P - 8 8P
TM22P - 8 8P
1
2
1
3
4
1
2
3
Series name
Cover Type
TM21P: Shielded
Series name
Size
TM22P : Non-shielded
8 : For 8 contacts
8P: 8
1
2
1
2
3
Blank: Protective latch cover
C: Short cover
Inserted contacts
Size
8: For 8 contacts
8P: 8
3
4
Inserted contacts
2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀPlug Connectors
Shielded
ꢀ
6.7
Cover
30.2
17.5
29.5
Conductor holding tray
Contact No. 1
Contact No.8
5.4
9.05
Part Number
TM21P-88P
CL No.
Cover Color
Light beige
Medium gray
Black
RoHS
222-2862-9-02
222-2862-9-02
222-2862-9-03
222-2862-9-04
222-2862-9-05
222-2862-9-06
222-2862-9-07
222-2862-9-08
222-2862-9-09
(
)
)
)
)
)
)
)
)
TM21P-88P 02
(
TM21P-88P 03
(
TM21P-88P 04
Natural light gray
Red
(
TM21P-88P 05
YES
(
TM21P-88P 06
Green
(
TM21P-88P 07
Blue
(
TM21P-88P 08
Yellow
(
TM21P-88P 09
Orange
BCover installed
BMated with corresponding receptacle
(shown for reference only)
(34)
(13.4)
(44.65)
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀPlug Connectors
Shielded-Short Cover
ꢀ
6.7
17.2
Cover
30.2
17.5
Conductor holding tray
Contact No.8
Contact No.1
5.4
9.05
Part Number
CL No.
Cover color
Black
RoHS
YES
(
)
TM21CP-88P 03
222-2884-1-03
Note: For other colors contact Hirose sales representative.
BCover installed
BMated with corresponding receptacle
(shown for reference only)
(21.7)
(32.35)
(13.4 )
BApplicable Shielded Cable Specifications
Specifications
Solid copper conductor: 0.5mm dia.
Conductor
Jacket
Shield
Insulation
Conductor
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
(
)
Individual conductor insulation dia.
Drain wire
0.9mm to 1.0mm
AWG#26 (tin coated)
(dia. 6.6mm)
Drain wire
Overall jacket dia.
Note: For cable termination procedures refer to:
[
]
[
]
TM21P-88P Cable Termination Procedure Manual (ETA-E2349) and TM21CP-88P Cable termination Procedure Manual
(ETA-E2353).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
4
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
ꢀPlug Connectors
Non-shielded
ꢀ
22.5
Conductor holding tray
9.05
5.4
Contact No.1
Contact No.8
Part Number
TM22P-88P
CL No.
RoHS
YES
222-2899-9
BMated with corresponding receptacle (shown for reference only)
(11.85)
BApplicable Non-shielded Cable Specifications
Specifications
Solid copper conductor: 0.5mm dia.
Jacket
Conductor
Stranded copper conductor: AWG#24
(Dia. 0.2mm x 7 pcs)
(
)
Individual conductor insulation dia.
Overall jacket dia.
0.9mm to 1.0mm
Conductor
Insulation
(dia. 5.4mm to 5.7mm)
Note: For cable termination procedures refer to:
[
]
TM22P-88P Cable Termination Procedure Manual (ETA-E2381).
Some cables may not meet the required service ratings. Contact Hirose sales representative for specific cable applications
recommendations.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BHand termination tools
For contact/conductor termination
ꢀ
Part Number
CL No.
Applicable connector
TM21P-88P
HT205/TM21P-88P
250-0234-4
TM21CP-88P
For cable and shield crimping (Shielded connectors only)
ꢀ
Part Number
CL No.
Applicable connector
TM21P-88P
HT206/TM21P-88P
250-0235-7
TM21CP-88P
For contact/conductor termination (Non-shielded connectors)
ꢀ
Part Number
CL No.
Applicable connector
TM22P-88P
HT501/TMP-88
902-2111-9*
*Scheduled for release soon. Please contact your Hirose Electric
account representative for information.
6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BTechnical Documentation
CAT5e Transmission Characteristics Data
ꢀ
These are the representative values of the various transmission characteristics data for connector assemblies
TM21P-88P and TM21R-5C-88-LP when fully mated.
All plugs in the TM21R-5C Series that were manufactured based on the De-embedded method of the TIA/EIA-
568-B.2 standard meet requirements of CAT5e single transmission performance.
• Signal Attenuation
0.5
0.4
0.3
0.2
0.1
0
0
10
20
30
40
50
60
70
80
90
100
Frequency(MHz)
1,2
3,6
4,5
7,8
CAT5e Spec
(Each two numbers are for the pair of individual contact position.)
• Near-End Crosstalk Attenuation (NEXT)
120
100
80
60
40
20
0
0
10
20
30
40
50
60
70
80
90
100
Frequency(MHz)
1,2-3,6
1,2-4,5
1,2-7,8
3,6-4,5
3,6-7,8
4,5-7,8
CAT5e Spec
• Return Loss
80
60
40
20
0
0
10
20
30
40
50
60
70
80
90
100
Frequency(MHz)
1,2
3,6
4,5
7,8
CAT5e Spec
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
• Far-End Crosstalk Attenuation (FEXT)
120
100
80
60
40
20
0
0
10
20
30
40
50
60
70
80
90
100
Frequency(MHz)
1,2-3,6
3,6-4,5
4,5-7,8
1,2-4,5
3,6-7,8
7,8-1,2
1,2-7,8
4,5-1,2
7,8-3,6
3,6-1,2
4,5-3,6
7,8-4,5
CAT-5e Spec
(Each two numbers are for pair of individual contact position.)
• Propagation Delay
3
2.5
2
1.5
1
0.5
0
0
10
20
30
40
50
60
70
80
90
100
Frequency(MHz)
1,2
3,6
4,5
7,8
CAT5e Spec
• Propagation Delay skew
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
10
20
30
40
50
60
70
80
90
100
Frequency(MHz)
Measurement Value
CAT5e Spec
®
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
8
相关型号:
TN-21P-88P(08)
Telecom and Datacom Connector, 8 Contact(s), Male, Crimp Terminal, Plug, ROHS COMPLIANT
HRS
TN-22P-88P
Telecom and Datacom Connector, 8 Contact(s), Male, Crimp Terminal, Plug, ROHS COMPLIANT
HRS
©2020 ICPDF网 联系我们和版权申明