U.FL-LP-068N2-A-(L)_技术文档

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height

U.FL Series

Up to 6GHz Transmission Speed

Mated Height Comparison

(With E.FL series)

E.FL-LP-040

E.FL-LP-066

U.FL-LP-040

U.FL-LP-066

U.FL-LP(V)-040

U.FL

E.FL

ꢀSpace Factor of Mated Connector

ꢀFeatures

1.Extremely Small Occupied Mounting Area

Reduced board space requirement by 18% to 7.7mm², when

compared with Hirose’s E.FL connectors.

2.Light Weight

Cable

U.FL-LP-040

Plug

Dia.0.81

One of the world’s lightest coaxial connectors.

Receptacle: 15.7mg

U.FL-R-SMT

Receptacle

3.Frequencies of Up to 6GHz

To meet the frequency requirements of a wide variety of

miniature equipment, these connectors offer high frequency

performance from DC to 6 GHz.

Cable

U.FL-LP-066

Plug

Dia.1.32

Dia.1.13

4.Board Placement with Automatic Equipment

Supplied on tape-and-reel packaging.

U.FL-R-SMT

Receptacle

5.Use of Ultra-fine Teflon Cable

Several of ultra-fine single and double shielded Teflon^®

coaxial cables terminate to U.FL plug.

NEW

Cable

U.FL-LP(V)-040

Plug

6. Simple Disconnection

Dia.0.81

Dedicated tool allows reliable un-mating of the plug.

7.User Friendly Mating Operation

Tactile lock feeling ensures and confirms reliable connection.

U.FL-R-SMT

Receptacle

Cable

ꢀApplications

U.FL-LP-062

Plug

Mobile phones, Wireless LAN, Mini-PCI, Bluetooth, PDA, GPS,

electronic measuring instruments, etc.

Dia.1.00

U.FL-R-SMT

Receptacle

NEW

Cable

U.FL-LP-088

Plug

Dia.1.37

U.FL-R-SMT

Receptacle

*Teflon is a registered trademark of DuPont.

2004.2

1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀ Product Specifications

Nominal characteristic impedance

Voltage rating

50 ohms

60 V AC (rms)

DC to 6 GHz

Operating temperature range

Operating humidity

-40˚C to +90˚C

90% max.

Ratings

Frequency range

Item

Specification

Conditions

1. Contact resistance

Center: 20 m ohms max.

Outside: 10 m ohms max.

500 M ohms min.

10 mA max.

2. Insulation resistance

3. Withstanding voltage

4. V.S.W.R.*

100 V DC

No flashover or insulation breakdown.

Part No.

200 V AC / 1 minute

Up to 3GHz

1.3 Max

3 to 6GHz

U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly

1.35 Max

1.3 Max

1.4 Max

1.5 Max

1.3 Max

1.4 Max

U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly

U.FL-LP-068 dia.1.13mm Coaxial Cable Assembly

U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly

U.FL-LP-062 dia.1mm Coaxial Cable Assembly

U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly

1.3 Max

5. Center contact holding force 0.15 N min.

Measured with a Ø 0.475 pin gauge

6. Durability

Contact resistance

(mating/un-mating,

with corresponding plug)

7. Vibration

Center: 25 m ohms max.

Outside: 15 m ohms max.

30 cycles

Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration

of 59m/s², for 5 cycles in the direction of each of the 3 axis.

Acceleration of 735 m/s², 11ms duration, sine half-wave

waveform, 6 cycles in each of 3 axes.

No electrical discontinuity of 1µs min.

No damage, cracks or parts dislocation.

8. Shock

9. Humidity

No damage, cracks or parts dislocation.

(Steady state)

Insulation resistance 100 M ohms min.(when humidity high) 96 hours at temperature of 40ç and humidity of 95%.

Insulation resistance 500 M ohms min.(when dry)

10. Temperature cycle

No damage, cracks or parts dislocation.

Contact resistance:25 m ohms max. (Center)

15 m ohms max. (Outside)

Temperature:-40˚C +5 to +35˚C +90˚C +5 to +35˚C

/

Time:

30

5 max.

30

/

5 max.(Minutes)

/

5 cycles

11. Salt spray test

No excessive corrosion

5% salt water solution, 48 hours

*V.S.W.R. Measurement System

The above V.S.W.R. standard values were measured using the measurement connection shown below.

Note 1: Cable type connectors were measured with SMA conversion adapters

attached to both ends of the harness product of a suitable 100cm cable.

Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and

measurements were conducted with SMA conversion adapters attached.

ꢀMaterial/Finishes

Part

Material

Phosphor bronze

Brass

Finish

Remarks

—————

UL94V-0

Shell

Silver plated

Gold plated

Color: Black

Color: Beige

Male center contact

Female center contact

Phosphor bronze

Plug

Receptacle

PBT

LCP

Insulator

UL94V-0

2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀReceptacles

Cut Out Prohibition Area

4

0.05

GND

1.9 0.05

SIG

GND

Ø2

GND

SIG

1 0.05

3

2.6

0.6

Note 1: Receptacles of (01) specification are sold by the

bag with 100 pieces per bag.

Please order in pack units.

Note 2: Receptacles of (10) specification are sold by the

reel (which contains 2,500 pieces).

Recommended PCB mounting pattern

Please order in reel units.

Note 3: This area may be covered by insulating material.

Part No.

CL No.

Packaging

Weight (mg)

15.7/unit

U.FL-R-SMT(01)

U.FL-R-SMT(10)

331-0471-0-01

331-0471-0-10

Bag packaging (100 pieces/bag)

Reel packaging (2500 pieces/reel)

ꢀPackaging Specifications

Embossed Carrier Tape Dimensions

2

0.1

4 0.1

Center contact

0.3

1.6

Unreeling direction

8

0.1

Reel Dimensions

1.8

14

3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀCable Assembly (Plug)

U.FL-LP-040

U.FL-LP-066

U.FL-LP(V)-040

U.FL-LP-062

U.FL-LP-088

Part No.

4

3.4

5

4

2.5mm Max.

2.0mm Max.

2.4mm Max.

Mated Height

(2.4mm Nom.)

(1.9mm Nom.)

(2.3mm Nom.)

Dia. 1.13mm and

Dia. 1.32mm

Dia. 0.81mm

Coaxial cable

Dia. 0.81mm

Coaxial cable

Dia. 1mm

Dia. 1.37mm

Coaxial cable

Applicable

cable

Coaxial cable

53.7

59.1

34.8

45.5

71.7

Weight (mg)

ꢀCable Guide

Cable Specification

Jacket

Cable

Description

Type

Nominal attenuation

Inner

Conductor^*

Dielectric

Outer

Conductor^*

Nominal

Diameter

Dia.0.40

PFA

Diameter

Dia.0.81

PFA

Impedance

At 3GHz

At 6GHz

Dia.0.81mm

04

Coaxial Cable

7/0.05 SA

(AWG36)

7/0.08 SA

(AWG32)

7/0.08 SA

(AWG32)

7/0.071 SA

(AWG33)

7/0.102 SA

(AWG30)

Single

50 ohms

6.45dB/m

9.42dB/m

Shield SA

Single

Dia.1.13mm

068

Coaxial Cable

Dia.0.68

FEP

Dia.1.13

FEP

3.43dB/m

5.13dB/m

50 ohms

Shield SA[TA]

Double

[3.73dB/m]

[5.44dB/m]

Dia.1.32mm

066

Coaxial Cable

Dia.0.66

FEP

Dia.1.32

FEP

3.8dB/m

3.1dB/m

2.8dB/m

5.6dB/m

4.4dB/m

4.3dB/m

Shield TA

Tape, single

Shield TAT

Single

Dia.1mm

062

Coaxial Cable

Dia.0.62

FEP

Dia.1

FEP

Dia.1.37mm

088

Coaxial Cable

Dia.0.88

FEP

Dia.1.37

FEP

Shield TA

(data as provided by cable suppliers, for reference only)

* SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin

4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀHow to Specify Plug Cable Assembly

Dimensions of U.FL Series assembly products should be made as indicated below.

Single-Ended Cable Assembly

Double-Ended Cable Assembly

L

ꢀ

Total Standard Tolerance for Total Length of Cable Assembly

ꢀOrdering Information

Total Length(mm)

Standard Tolerance (mm)

U.FL - [] LP - [] - A - (L)

< <

00350 L 00200

= =

04

08

1

2

3

4

<

02000<L 00500

=

<

1

Series name

U.FL

05000<L 01000

=

12

<

2 Assembly type

LP: Single ended

10000<0L=1000

1.5%

2LP: Double ended

Note: Shortest length L is 35 mm.

04 : Dia.0.81mm Coaxial Cable

3 Cable type

068 : Dia.1.13mm Coaxial Cable

066 : Dia.1.32mm Coaxial Cable

062 : Dia.1 mm Coaxial Cable

088 : Dia.1.37mm Coaxial Cable

4 Total Length(mm)

Length is expressed in mm units.

Part No. of Plug Part No. of Cable Assembly

Description

U.FL-2LP-04N1-A-(L)

Dia. 0.81mm double ended coaxial cable, color: white

Dia. 0.81mm double ended coaxial cable, color: black

Dia. 0.81mm single ended coaxial cable, color: white

Dia. 0.81mm single ended coaxial cable, color: black

Dia. 1.13mm double ended coaxial cable, color: gray

Dia. 1.13mm double ended coaxial cable, color: black

Dia. 1.13mm single ended coaxial cable, color: gray

Dia. 1.13mm single ended coaxial cable, color: black

Dia. 1.32mm double ended coaxial cable, color: gray

Dia. 1.32mm double ended coaxial cable, color: black

Dia. 1.32mm single ended coaxial cable, color: gray

Dia. 1.32mm single ended coaxial cable, color: black

Dia. 0.81mm double ended coaxial cable, color: white

Dia. 0.81mm double ended coaxial cable, color: black

Dia. 0.81mm single ended coaxial cable, color: white

Dia. 0.81mm single ended coaxial cable, color: black

Dia. 1mm double ended coaxial cable, color: gray

Dia. 1mm double ended coaxial cable, color: black

Dia. 1mm single ended coaxial cable, color: gray

Dia. 1mm single ended coaxial cable, color: black

Dia. 1.37mm double ended coaxial cable, color: gray

Dia. 1.37mm double ended coaxial cable, color: black

Dia. 1.37mm single ended coaxial cable, color: gray

Dia. 1.37mm single ended coaxial cable, color: black

U.FL-2LP-04N2-A-(L)

U.FL-LP-040

U.FL-LP-04N1-A-(L)

U.FL-LP-04N2-A-(L)

U.FL-2LP-068N1-A-(L)

U.FL-2LP-068N2-A-(L)

U.FL-LP-068

U.FL-LP-068N1-A-(L)

U.FL-LP-068N2-A-(L)

U.FL-2LP-066J1-A-(L)

U.FL-2LP-066J2-A-(L)

U.FL-LP-066

U.FL-LP-066J1-A-(L)

U.FL-LP-066J2-A-(L)

U.FL-2LP(V)-04N1-A-(L)

U.FL-2LP(V)-04N2-A-(L)

U.FL-LP(V)-040

U.FL-LP(V)-04N1-A-(L)

U.FL-LP(V)-04N2-A-(L)

U.FL-2LP-062N1D-A-(L)

U.FL-2LP-062N2D-A-(L)

U.FL-LP-062

U.FL-LP-062N1D-A-(L)

U.FL-LP-062N2D-A-(L)

U.FL-2LP-088K1T-A-(L)

U.FL-2LP-088K2T-A-(L)

U.FL-LP-088

U.FL-LP-088K1T-A-(L)

U.FL-LP-088K2T-A-(L)

Please contact Hirose Sales Representative for cable length and cable end treatment.

5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀConversion Adapters

ꢀSMA Conversion Adapter

(Mating portion: U.FL side jack - SMA side plug)

(10.7)

8HEX

Note: The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

Part No.

CL No.

HRMP-U.FLJ

311-0300-2

ꢀSMA Conversion Adapter

(Mating portion: U.FL side plug - SMA side jack)

14.05

6

(4.05)

5.6

1/4-36UNS-2A

Note: The U.FL side mating portions has a lower lock retention

force than the regular product, therefore, cannot be used

for purposes other than performance measurements.

Part No.

CL No.

HRMJ-U.FLP

311-0301-5

ꢀSMA Conversion Adapter

(Mating portion: U.FL side plug-SMA side jack)

(18.6)

(4)

6

5.5

1/4-36UNS-2A

Part No.

CL No.

Note: This connector is used by compressing the mated

portion of U.FL side onto the U.FL-R-SMT portion.

HRMJ-U.FLP-ST1

311-0385-5

ꢀReceptacle Inspection

12.9

This receptacle is used for inspecting the continuity, withstand

voltage, and other aspects of the harness product.

7HEX

(7.9)

(4.4)

5

1

M5∞0.5

Part No.

U.FL-R-1

CL No.

This receptacle is used for check the continuity, withstanding

voltage, and other performance of the cable assembly products.

331-0466-0

ꢀPlug Extraction Tool

(90)

This jig is used for extraction from a mating condition.

50

U.FL

Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088.

Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062.

Part No.

CL No.

U.FL-LP-N-2

331-0494-5

331-0493-2

U.FL-LP(V)-N-2

6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

ꢀUsage Precautions

1. Plugs

1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges

and pull off vertically, in the direction of the connector mating axis.

2) To mate the connectors, the mating axes of both connectors must be

aligned and the connectors can be mated. The "click" will confirm fully

mated connection.Do not attempt to insert on an extreme angle.

Extraction Jig

(1) Connection/

disconnection of

connectors

U.FL Cable

Assembly

U.FL-R-SMT

After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram

below.

U.FL-LP-040

2N max.

U.FL-R-SMT

(2) Permissible load on

the cable after

4N max.

connector are mated.

2N max.

(3) Precautions

Do NOT forcefully twist or deform wires.

2. Receptacles

Heating peak

240ç 3 seconds

(ç)

260

240

220

200

180

160

140

120

100

80

183ç

Preheating

(130 to 165ç)

(1) Recommended

soldering temperature

profile

40 to 50

seconds

Within 2 minutes

Time

1) The temperature profile indicates the board surface temperature at the point of contacts with the connector

terminals.

2) The temperature profile will change depending on conditions which include such factors as the size of the board,

the solder used, and the solder thickness.

(2) Recommended

manual soldering

Manual soldering: 350˚C for 5 seconds

(3) Recommended screen

thickness

0.1 to 0.15 mm

7


型号：	U.FL-LP-068N2-A-(L)
厂家：	HRS
描述：	Ultra Small Surface Mount Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
文件：	总7页 (文件大小：258K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

U.FL-LP-068N2-A-(L) [HRS]

相关型号：

U.FL-LP-068N2T-A-L

U.FL-LP-088

U.FL-LP-088K1T-A-(L)

U.FL-LP-088K2T-A-(L)

U.FL-LP-088N1T-A-(50)

U.FL-LP-088N1T-A-(L)

U.FL-LP-088N1T-A-L

U.FL-LP-088N2T-A-(L)

U.FL-LP-088N2T-A-L

U.FL-LP-5016-A-(200)

U.FL-LP-5016-A-(35)

U.FL-LP-5016-A-(500)