HE300 [HVPSI]

SECONDARY SURGE LIGHTNING ARRESTER; 二级浪涌避雷器


型号：	HE300
厂家：	HIGH VOLTAGE POWER SOLUTIONS, INC.
描述：	SECONDARY SURGE LIGHTNING ARRESTER 二级浪涌避雷器
文件：	总2页 (文件大小：57K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SECONDARY

SURGE

"LIGHTNING"

ARRESTER

HE300

120 VAC

1#, 2W

FEATURES

ꢀ

Industrial/Commercial Version

MOV Circuit Design

Made in America utilizing

American Components

Cost Effective

ꢀ

Reliable Solid-State Protection

Maintenance Free

Molded Plastic Case

Threaded 1/2" NPT conduit nipple with locknut

18 " Stranded 12 AWG color coded leads

Suitable for indoor or outdoor installation

Automatic Recovery, Self Restoring

DESCRIPTION

The HE300 is a MOV (Metal Oxide Varistor) based hardwired Secondary Surge Arrester, often referred to as a

Lightning Arrester. The device is designed to protect electrical equipment from damaging effects of Spikes (+) and

Notches (-) caused by lightning, utility switching, insulation arcing, electrical motor cycling, and other large or sudden

changes in electrical power flow on incoming AC power lines.

The HE300 is a single phase, two wire, arrester intended to protect 120 VAC systems. The epoxy encapsulated

arrester is designed to be easily installed in any position indoors or outdoors utilizing the integral 1/2" threaded nipple

and supplied metal lock nut.

The housing is molded from flame retardant plastic that is both weather and UV resistant, and complies with the UL

standard for strength and flame resistance properties. The arrester is sealed with UL component recognized epoxy

potting compound. The HE300 has three 18" long, 12 AWG multi-stranded leads that are color coded for ease of

installation.

The HVPSI HE300 is ideal protection for outdoor lighting and pole lamps, panelboards, oilfield pumps, workshops,

irrigation and sump pumps, refrigeration systems, farm equipment including milking machines and poultry processing

equipment, electric motors and controls, heat pumps and air conditioning equipment and many other electrical

devices.

The HE300 utilizes a single MOV per pole to reduce the potential load balancing/sharing problems during operation.

UL listed versions :

HE500 120/240V, Single Phase, Three Wire, Industrial/Commercial Version.

HE510 120/240V, Single Phase, Three Wire, Residential Version.

HE1203 120/208V, Three Phase, Four Wire, Industrial/Commercial Version.

HE4803 277/480V, Three Phase, Four Wire, Industrial/Commercial Version.

Rev 2, Aug 2007

PO Box 700968 ꢀ Dallas TX 75370

Ph (972) 248-7691 ꢀ Fax (972) 381-9998

ELECTRICAL CHARACTERISTICS

HE300

PART

NUMBER

SERVICE

VOLTAGE

PHASE

WIRE

CONFIGURATION

TYPICAL CLAMP VOLTAGE

8 X 20uS Current Wave (Line to Ground)

1.5kA

500V(1)

625V⁽²⁾

5kA

10kA

750V⁽¹⁾

1400V⁽²⁾

20kA

950V⁽¹⁾

2200V⁽²⁾

25kA

HE300

120V

175V Max

(rms)

SINGLE

Line (Black)

Neutral/Ground (White)

650V⁽¹⁾

950V⁽²⁾

1050V⁽¹⁾

2600V⁽²⁾

⁽¹⁾1" leads ⁽²⁾18" leads

DIMENSIONS AND WIRING DIAGRAMS

ARCHITECT and ENGINEERS

SUGGESTED SPECIFICATIONS

SPECIFICATIONS and STANDARDS

The single phase, two wire Secondary Surge Arrester for

120 volt AC service or machine equipment shall be a

High Voltage Power Solutions Model HE300. The

lightning arrester shall be of a single MOV per pole

design and provide protection for Category C Transient

Surges as defined in ANSI C62.41 (Formerly IEEE Std.

587-1980) without degradation of the components. The

surge protector shall protect between the line and

neutral/ground conductor. The enclosure shall be

molded of fire retardant plastic. The unit will be sealed

with a UL component recognized epoxy potting

compound to minimize moisture and pollution intrusion.

A one-half inch conduit nipple and metal lock nut shall

be provided. 18 inch, stranded 12 gauge color coded

leads shall be provided. The arrester shall carry a one

year warrantee.

TECHNOLOGY: Metal Oxide Varistors (MOV) each

line to neutral/ground.

PEAK SURGE CURRENT: (8x20uS) 25,000 Amps

M C O V: 175 VAC rms (Line to Neutral).

ENCLOSURE: Black molded flame retardant plastic

housing with 1/2" x 20 threaded nipple. The

housing is weatherproof and UV resistant.

ENCAPSULATION: UL component recognized epoxy

potting material.

WIRING: Two12 gauge stranded color coded leads.

Black for line.

White for neutral/ground.

OPERATION TEMPERATURE: -40ꢁC to +85ꢁC

RESPONSE TIME: <5ns

CURRENT DRAIN: <100uA

UNIT WEIGHT: 7.5 ounces

SHIPPING WEIGHT: per arrester 8.5 ounces

per carton (12) 6.75 lbs.

HIGH VOLTAGE POWER SOLUTIONS, INC. reserves the right to make changes in

these specifications at any time and without notice in order to supply the best product

possible.

per case (48) 28.5 lbs

@ 2002 ꢀ HIGH VOLTAGE POWER SYSTEMS, INC. ꢀ Printed in U.S.A.

ANSI : C62.11-1987 (Formerly IEEE Std. 587-1980)

PO Box 700968 ꢀ Dallas TX 75370

Ph (972) 248-7691 ꢀ Fax (972) 381-9998

相关型号：