MBR1004W [HY]

Silicon Bridge Rectifiers;


型号：	MBR1004W
厂家：	HY ELECTRONIC CORP.
描述：	Silicon Bridge Rectifiers 局域网二极管
文件：	总3页 (文件大小：354K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

www.hygroup.com.tw

MBR10005W THRU MBR1010W

Reverse Voltage - 50 to 1000 Volts

Silicon Bridge Rectifiers

Forward Current - 10 Amperes

Features

● Low forward voltage drop

MBRW

● Electrically isolated base -2000 Volts

● High surge forward current capability

RoHS

COMPLIANT

●Meet UL flammability classification 94V-0

Mechanical Data

● Polarity: Symbol Marked on body

● Mounting position: Any

Note: Products with logo

are made by HY Electronic (Cayman) Limited.

Applications

● General purpose use in AC/DC bridge full wave rectification,

for power supply, industrial automation applications, etc.

Package Outline Dimensions in Inches (Millimeters)

Maximum Ratings and Electrical Characteristics

Rating at 25℃ ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

MBR

Characteristics

Symbol

Unit

10005W 1001W 1002W 1004W 1006W 1008W 1010W

Maximum Repetitive Peak Reverse Voltage

Maximum RMS Voltage

VRRM

VRMS

I(AV)

100

200

140

400

280

600

420

800

560

1000

700

Maximum Average Forward Rectified Current @TC=55 ℃

Peak Forward Surge Current, 8.3mS Single Half Sine-Wave,

Superimposed on Rated Load (JEDEC Method)

IFSM

240

I²t Rating for Fusing (t<8.3mS)

I²t

A²s

240

1.1

Peak Forward Voltage per Diode at 5A DC

Maximum DC Reverse Current at Rated

DC Blocking Voltage per Diode @TJ=25℃

Operating Junction Temperature Range

Storage Temperature Range

μA

-55 to +150

℃

TSTG

MBR10*W-S-00-00

Rev. 11, 18-May-2020

Rating and Characteristic Curves

MBR10005W THRU MBR1010W

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-Repetitive Surge Current

300

250

200

150

100

8.3mS Single Half-Sine-Wave

(JEDEC METOD)

100

150

100

Case Temperature (℃)

Number of Cycles at 60Hz

Fig. 3 - Typical Reverse Characteristics

Fig. 4 - Typical Forward Characteristics

1000

100

Pulse Width 300uS

2%Duty Cycle

TJ=150°C

TJ=125°C

TJ=100°C

TJ=25°C

TJ=75°C

TJ=25°C

TJ=125°C

TJ=75°C

0.1

100

0.2 0.4 0.6 0.8

1.2 1.4 1.6

Instantaneous Forward Voltage (V)

Percent of Rated Peak Reverse Voltage (%)

The curve above is for reference only.

MBR10*W-S-00-00

Rev. 11, 18-May-2020

Legal Disclaimer Notice

Disclaimer

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons.

HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co-

tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising

out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d-

amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch-

antability.

Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require-

ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi-

lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties

described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific-

ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet-

ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or

otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati-

ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or

selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers-

onnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any

conduct of HY. Product names and markings noted herein may be trademarks of their respective owners.

Rev. 11, 18-May-2020

相关型号：