MUR410EG [HY]

ULTRA FAST GLASS PASSIVATED RECTIFIERS;


型号：	MUR410EG
厂家：	HY ELECTRONIC CORP.
描述：	ULTRA FAST GLASS PASSIVATED RECTIFIERS
文件：	总3页 (文件大小：137K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MUR405EG thru MUR4100EG

ULTRA FAST GLASS PASSIVATED

RECTIFIERS

REVERSE VOLTAGE - 50 to 1000 Volts

FORWARD CURRENT - 4.0 Amperes

DO-201AE

FEATURES

●Low cost

●Diffused junction

.042(1.06)

.041(1.05)

.0.03387((00..9956))

●Ultra fast switching for high efficiency

●Low reverse leakage current

●Low forward voltage drop

DIA.

1.0(25.4)

MIN

●High current capability

●The plastic material carries UL recognition 94V-0

FEATURES

.375(9.5)

.335(8.5)

●Case: JEDEC DO-201AE molded plastic

●Weight: 1.04 grams

.220(5.6)

.197(5.0)

●Polarity: Color band denotes cathode end

●Mounting Position: Any

DIA.

1.0(25.4)

MIN

Dimensions in inches and (millimeters)

MAXIMUM RATINGS AND ELECTRICAL CHARACTERSITICS

Ratings at 25℃ambient temperature unless otherwise specified.

Single phase half-wave 60Hz,resistive or inductive load,

for capacitive load current derate by 20%.

MUR

SYMBOL

UNIT

CHARACTERISTICS

405EG 410EG 415EG 420EG 440EG 460EG 480EG 4100EG

Maximum recurrent peak reverse voltage

VRRM

VRMS

VDC

100

150

105

150

200

140

200

400

280

400

600

420

600

800

550

800

1000

700

Maximum RMS voltage

Maximum DC blocking voltage

100

1000

Maximum average forward rectified current

0.375”(9.5mm) lead length at T_A=55℃

4.0

I(AV)

Peak forward surge current 8.3ms single half sinewave

superimposed on rated load (JEDEC Method)

150

IFSM

1.28

1.85

Maximum instantaneous forward voltage at 4.0A

Maximum DC reverse current

at rated DC bolcking voltage

@TJ=25℃

μA

150

@TJ=100℃

Maximum Reverse Recovery Time(Note 1)

Operating junction capacitance

TRR

-55 to + 150

℃

Storage temperature range

TSTG

Note: Measured with IF=0.5A，IR=1A ，IRR=0.25A

Rev. 2, 13-Mar-2017

RATING AND CHARACTERTIC CURVES

MUR405EG thru MUR4100EG

FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT

200

FIG. 1 – FORWARD CURRENT DERATING CURVE

4.8

4.0

3.2

150

100

2.4

SINGLE PHASE HALF WAVE 60Hz

RESISTIVE OR INDUCTIVE LOAD

1.6

0.8

SINGLE HALF-SINE-WAVE

(JEDEC METHOD)

100

125

150

100

AMBIENT TEMPERATURE (℃)

NUMBER OF CYCLES AT 60Hz

FIG.3-TYPICAL FORWARD CHARACTERISTICS

FIG.4-TYPICAL REVERSE CHARACTERISTICS

10000

TJ=25°C

PULSE WIDTH=300μs

1%DUTY CYCLE

1000

100

T_J=100°C

MUR405EG-

MUR415EG

T_J=25°C

MUR420EG-

MUR460EG

MUR480EG-

MUR4100EG

0.1

PERCENT RATED PEAK REVERSE VOLTAGE,(%)

120

140

100

1.8

1.2

1.4 1.6

0.2

0.4

0.6

0.8

1.0

INSTANTANEOUS FORWARD VOLTAGE (VOLTS)

The cruve graph is for reference only, can't be the basis for judgment(曲线图仅供参考)!

Rev. 2, 13-Mar-2017

Legal Disclaimer Notice

Disclaimer

ALL specifications and data are subject to be changed without notice to improve reliability function or design or other reasons.

HY makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the co-

tinuing production of any product. To the maximum extent permitted by applicable law, HY disclaims (i) any and all liability arising

out of the application or use of any product, (ii) any and all liability, including without limitation special,consequential or incidental d-

amages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merch-

antability.

Statements regarding the suitability of products for certain types of applications are based on HY’s knowledge of typical require-

ments that are often placed on HY products in generic applications. Such statements are not binding statements about the suitabi-

lity of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties

described in the product specification is suitable for use in a particular application.Parameters provided in datasheets and specific-

ations may vary in different applications and performance may vary over time. All operating parameters, including typical paramet-

ers, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or

otherwise modify HY’s terms and conditions of purchase, including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, HY products are not designed for use in medical, life-saving, or life-sustaining applicati-

ons or for any other applications in which the failure of the HY product could result in personal injury or death. Customers using or

selling HY products not expressly indicated for use in such applications do so at their own risk.Please contact authorized HY pers-

onnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any

conduct of HY. Product names and markings noted herein may be trademarks of their respective owners.

声明

所有的规格及数据如因改进可靠性、功能、设计或其他原因发生变更，恕不另行通知。

HY 对产品特定用途的适用性或任何产品的连续生产不做担保、陈述或保证。在可适用法律允许的最大程度上，HY 不承担(i) 因应

用或使用任何产品产生的任何及全部责任，(ii) 包括但不限于特定、连带或附带损害产生的任何及全部责任，(iii) 不做任何形式默认担保，

包括不保证特定用途的使用性、非侵权及商业适销性。

关于产品适用于某类应用的声明以HY 掌握的HY 产品一般应用环境下的典型要求为准。此类声明与产品特定应用的适用性声明不存在

任何关联。客户自行负责根据产品技术规格的说明认证特定产品是否适用于特定的应用。数据手册和技术规格中提供的参数可能因不同

的应用而异，而且性能可能随时间而变化。所有工作参数，包括电型参数，必须有客户的技术专家根据每一个客户应用环境确认。产品

技术规格不扩展或不以其他方式修改HY 的采购条款与条件或不以其他方式修改HY 的采购条款与条件，包括但不限于规定的质保条件。

除非书面注明，否则HY产品不用于医疗、救护或生命维护，或其他因HY 产品发生故障有可能导致人身伤亡的应用场合。客户使用或

销售未明确指示可在上诉应用中使用的HY 产品风险自负。如欲获得有关指定用于上诉应用的产品的书面条款及条件，请与HY授权人员

联系。

本文档或任何 HY 的行为不以禁止反言或其他方式授予任何知识产权的许可，无论显示还是暗示。本文提到的产品名称和标识可能为

各自所有者的商标。

Rev. 2, 16-Mar-2017

相关型号：