ICS7151M-40 [ICSI]
Spread Spectrum Clock Generator; 扩频时钟发生器型号: | ICS7151M-40 |
厂家: | INTEGRATED CIRCUIT SOLUTION INC |
描述: | Spread Spectrum Clock Generator |
文件: | 总8页 (文件大小:166K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ICS7151
Spread Spectrum Clock Generator
Description
Features
The ICS7151-10, -20, -40, and -50 are clock
generators for EMI (Electro Magnetic Interference)
reduction (see below for frequency ranges and
multiplier ratios). Spectral peaks can be attenuated by
slightly modulating the oscillation frequency. Both down
and center spread profiles are selectable. Down spread
maintains an average frequency less than an unspread
clock, and will not exceed the maximum frequency of
an unspread clock.
• Operating voltage of 3.3 V 0.3 V
• Packaged in 8-pin SOIC
• Available in Pb (lead) free package
• Input frequency range of 16.5 to 33.4 MHz
• Output frequency ranges of 8.3 to 16.7 MHz, 16.5 to
33.4 MHz, 33.3 to 66.7 MHz, 66.6 to 133.4 MHz
• Provides a spread spectrum clock output ( 0.5%,
1.5% center spread; -1.0%, -3.0% down spread)
• Multiplication rates of x1/2, x1, x2, and x4
• Advanced, low-power CMOS process
Block Diagram
VDD
2
S1:0
PLL Clock
Synthesis
and Spread
Spectrum
Circuitry
ENS
CKOUT
XIN
Clock Buffer/
Crystal
Ocsillator
XOUT
External caps required with crystal for
accurate tuning of the clock
GND
Product Lineup
Product
Input Frequency Range
16.5 MHz to 33.4 MHz
16.5 MHz to 33.4 MHz
16.5 MHz to 33.4 MHz
16.5 MHz to 33.4 MHz
Multiplier Ratio
Output Frequency Range
ICS7151M-10, ICS7151MI-10
ICS7151M-20, ICS7151MI-20
ICS7151M-40, ICS7151MI-40
ICS7151M-50, ICS7151MI-50
X1
X2
16.5 MHz to 33.4 MHz
33.3 MHz to 66.7 MHz
66.6 MHz to 133.4 MHz
8.3 MHz to 16.7 MHz
X4
X1/2
MDS 7151 E
1
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
Pin Assignment
Spread Direction and Percentage
Select Table
8
7
6
5
XOUT
VDD
XIN
GND
S0
1
2
3
4
S1
Pin 4
(note1) (note1)
S0
Pin 3
Spread
Direction
Spread
Percentage (%)
ENS
0
0
1
1
0
1
0
1
Center
Center
Down
Down
±1.5
±0.5
-1.0
-3.0
S1
CKOUT
8 pin (150 mil) SOIC
ENS
Spread Spectrum
(note 2)
OFF
ON
0
1
Notes:
1. The modulation rate varies with input frequency.
2. Spread will default to ON when ENS pin is left open.
Pin Descriptions
Pin
Pin
Pin Type
Pin Description
Number
Name
1
2
3
4
5
6
7
8
XIN
GND
S0
Input
Resonator connection pin/clock input pin.
Power Connect to ground.
Input
Input
Select pin 0. Modulation rate setting pin.
Select pin 1. Modulation rate setting pin.
S1
CKOUT
ENS
VDD
XOUT
Output Modulated clock output pin.
Input
Modulation enable setting pin. Internal pull-up resistor.
Power Connect to +3.3 V.
Output Resonator connection pin.
MDS 7151 E
2
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
underneath the device, or on layers adjacent to the
ground plane layer used by the device.
External Components
The ICS7151 requires a minimum number of external
components for proper operation.
Crystal Information
Decoupling Capacitor
The crystal used should be a fundamental mode (do
not use third overtone), parallel resonant. Crystal
capacitors should be connected from pins X1 to ground
and X2 to ground to optimize the initial accuracy. The
value of these capacitors is given by the following
equation:
A decoupling capacitor of 0.01µF must be connected
between GND and VDD on pin 7, as close to this pin as
possible. For optimum device performance, the
decoupling capacitor should be mounted on the
component side of the PCB. Avoid the use of vias in the
decoupling circuit.
Crystal caps (pF) = (C - 6) x 2
L
Series Termination Resistor
In the equation, C is the crystal load capacitance. So,
for a crystal with a 16 pF load capacitance, two 20 pF
[(16-6) x 2] capacitors should be used.
L
Series termination should be used on the clock output.
To series terminate a 50Ω trace (a commonly used
trace impedance) place a 27Ω resistor in series with
the clock line, as close to the clock output pin as
possible. The nominal impedance of the clock output is
25Ω.
Spread Spectrum Profile
The ICS7151 low EMI clock generator uses a triangular
frequency modulation profile for optimal down stream
tracking of zero delay buffers and other PLL devices.
The frequency modulation amplitude is constant with
variations of the input frequency.
PCB Layout Recommendations
For optimum device performance and lowest output
phase noise, the following guidelines should be
observed.
1) The 0.01µF decoupling capacitor should be mounted
on the component side of the board as close to the
VDD pin as possible. No vias should be used between
the decoupling capacitor and VDD pin. The PCB trace
to VDD pin should be kept as short as possible, as
should the PCB trace to the ground via.
Modulation Rate
2) To minimize EMI, the 27Ω series termination resistor
(if needed) should be placed close to the clock output.
3) An optimum layout is one with all components on the
same side of the board, minimizing vias through other
signal layers. Other signal traces should be routed
away from the ICS7151. This includes signal traces just
Time
MDS 7151 E
3
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS7151. These ratings,
which are standard values for ICS commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Rating
Supply Voltage, VDD
7 V
All Inputs and Outputs (referenced to GND)
Ambient Operating Temperature
Storage Temperature
-0.5 V to VDD+0.5 V
-40 to +85°C
-55 to +125°C
-40 to +125°C
260°C
Junction Temperature
Soldering Temperature
Overshoot (V
)
VDD + 1.0 V (t < 50 ns)
OVER
IOVER
Undershoot (V
)
GND - 1.0 V (t
< 50 ns)
IUNDER
UNDER
Overshoot/Undershoot
tUNDER < 50 ns
VIOVER < VDD + 1.0 V
VDD
Input pin
GND
VIUNDER < GND - 1.0 V
tOVER < 50 ns
Recommended Operation Conditions
Parameter
Min.
-40
Typ.
Max.
+85
3.6
Units
°C
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
+3.0
3.3
V
MDS 7151 E
4
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
DC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±±.3 V, Ambient Temperature -40 to +85°C
Parameter
Operating Voltage
Supply Current
Symbol
VDD
Conditions
Min.
Typ.
3.3
Max.
3.6
Units
V
3.0
IDD
No load, at 3.3 V
XIN, S0, S1, ENS
XIN, S0, S1, ENS
10
20
mA
V
Input High Voltage
Input Low Voltage
Output High Voltage
Output Low Voltage
Input Capacitance
V
VDDx0.8
0.0
VDD + 0.3
VDDx0.20
IH
V
V
IL
V
CKOUT, I = -4 mA
2.0
V
OH
OH
V
CKOUT, I = 4 mA
0.4
16
15
V
OL
OL
C
XIN, S0, S1, ENS
pF
pF
IN
CKOUT, 8.3 to 66.7
MHz
CKOUT, 66.7 to 100
MHz
10
7
pF
pF
kΩ
Load Capacitance
C
L
CKOUT, 100 to 133.4
MHz
Input Pull-up Resistor
R
ENS
100
240
400
PU
AC Electrical Characteristics
Unless stated otherwise, VDD = 3.3 V ±±.3 V, Ambient Temperature -40 to +85° C
Parameter
Input Crystal Frequency
Input Clock Frequency
Symbol
Conditions
Min.
16.5
16.5
16.5
Typ.
Max. Units
33.4
33.4
33.4
MHz
MHz
MHz
f
IN
CKOUT, Multiply by 1
(ICS7151-10)
CKOUT, Multiply by 2
(ICS7151-20)
33.3
66.6
8.3
66.7
133.4
16.7
MHz
MHz
MHz
Output Frequency
f
OUT
CKOUT, Multiply by 4
(ICS7151-40)
CKOUT, 2-frequency
division (ICS7151-50)
Input Clock Duty Cycle
Output Clock Duty Cycle
Output Slew Rate
XIN, 16.5 to 33.4 MHz
CKOUT, 1.5 V
40
40
50
60
60
%
%
t
DCC
CKOUT, 0.4 to 2.4 V,
CL = 15 pF
0.5
3.0
V/ns
MDS 7151 E
5
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
Parameter
Cycle to Cycle Jitter
Power-up Time
Symbol
Conditions
Min.
Typ.
Max. Units
No load, spread off
(ICS7151-10, -20)
100
150
200
5
ps
ps
ps
ms
No load, spread off
(ICS7151-40)
t
JC
No load, spread off
(ICS7151-50)
PLL lock-time from
power-up to 1% of final
value
2
Modulation Frequency
f
CKOUT
33
kHz
MOD
Input Frequency (fIN = 1/tIN)
tIN
0.8 VDD
XIN
Output Slew Rate
2.4 V
0.4 V
CKOUT
tr
tf
SR = (2.4 - 0.4) /tr, SR = (2.4 - 0.4) /tf
Thermal Characteristics 8 SOIC
Parameter
Symbol
Conditions
Min.
Typ. Max. Units
Thermal Resistance Junction to
Ambient
θ
θ
θ
θ
Still air
150
140
120
40
°C/W
°C/W
°C/W
°C/W
JA
JA
JA
JC
1 m/s air flow
3 m/s air flow
Thermal Resistance Junction to Case
MDS 7151 E
6
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
Package Outline and Package Dimensions (8-pin SOIC, 15± Mil. Body)
Package dimensions are kept current with JEDEC Publication No. 95
8
Millimeters
Inches
Symbol
Min
Max
1.75
0.25
0.51
0.25
5.00
4.00
Min
Max
A
1.35
0.10
0.33
0.19
4.80
3.80
.0532
.0040
.013
.0075
.1890
.1497
.0688
.0098
.020
.0098
.1968
.1574
A1
B
C
D
E
e
E
H
INDEX
AREA
1
2
1.27 BASIC
0.050 BASIC
H
h
L
5.80
0.25
0.40
0°
6.20
.2284
.010
.016
0°
.2440
.020
.050
8°
D
0.50
1.27
8°
α
A
h x 45
A1
C
- C -
e
SEATING
PLANE
B
L
.1± (.±±4)
C
MDS 7151 E
7
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
ICS7151
Spread Spectrum Clock Generator
Ordering Information
Part / Order Number
ICS7151M-10
Marking
Shipping Packaging
Tubes
Package
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
8-pin SOIC
Temperature
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
0 to +70° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
-40 to +85° C
7151M-10
7151M-10
7151M10L
7151M10L
7151M-20
7151M-20
7151M20L
7151M20L
7151M-40
7151M-40
7151M40L
7151M40L
7151M-50
7151M-50
7151M50L
7151M50L
7151MI10
7151MI10
51MI10LF
51MI10LF
7151MI20
7151MI20
51MI20LF
51MI20LF
7151MI40
7151MI40
51MI40LF
51MI40LF
7151MI50
7151MI50
51MI50LF
51MI50LF
ICS7151M-10T
ICS7151M-10LF
ICS7151M-10LFT
ICS7151M-20
ICS7151M-20T
ICS7151M-20LF
ICS7151M-20LFT
ICS7151M-40
ICS7151M-40T
ICS7151M-40LF
ICS7151M-40LFT
ICS7151M-50
ICS7151M-50T
ICS7151M-50LF
ICS7151M-50LFT
ICS7151MI-10
ICS7151MI-10T
ICS7151MI-10LF
ICS7151MI-10LFT
ICS7151MI-20
ICS7151MI-20T
ICS7151MI-20LF
ICS7151MI-20LFT
ICS7151MI-40
ICS7151MI-40T
ICS7151MI-40LF
ICS7151MI-40LFT
ICS7151MI-50
ICS7151MI-50T
ICS7151MI-50LF
ICS7151MI-50LFT
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Tubes
Tape and Reel
Parts that are ordered with a “LF” suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems (ICS)
assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would
result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial
applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary
environmental requirements are not recommended without additional processing by ICS. ICS reserves the right to change any
circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices or
critical medical instruments.
MDS 7151 E
8
Revision 012306
Integrated Circuit Systems, Inc. ● 525 Race Street, San Jose, CA 95126 ● tel (408) 297-1201 ● www.icst.com
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明