ICS8304AM-01 [ICSI]
LOW SKEW, 1-TO-4 LVCMOS / LVTTL INVERTING FANOUT BUFFER; 低偏移, 1到4 LVCMOS / LVTTL反相扇出缓冲器型号: | ICS8304AM-01 |
厂家: | INTEGRATED CIRCUIT SOLUTION INC |
描述: | LOW SKEW, 1-TO-4 LVCMOS / LVTTL INVERTING FANOUT BUFFER |
文件: | 总9页 (文件大小:135K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
GENERAL DESCRIPTION
FEATURES
The ICS8304-01 is a low skew, 1-to-4 Invert- • 4 LVCMOS / LVTTL outputs
ICS
ing Fanout Buffer and a member of the
HiPerClockS™ family of High Performance
Clock Solutions from ICS. The ICS8304-01
is characterized at full 3.3V for input VDD, and
• LVCMOS/LVTTL clock input
HiPerClockS™
• Maximum output frequency: 166MHz
• Output skew: 50ps (maximum)
mixed 3.3V and 2.5V for output operating supply modes
(VDDO). Guaranteed output and part-to-part skew char-
acteristics make the ICS8304-01 ideal for those clock
distribution applications demanding well defined per-
formance and repeatability.
• Part-to-part skew: 600ps (maximum)
• Small 8 lead SOIC package saves board space
• 3.3V input, outputs may be either 3.3V or 2.5V supply modes
• 0°C to 70°C ambient operating temperature
• Lead-Free package fully RoHS compliant
BLOCK DIAGRAM
PIN ASSIGNMENT
nQ0
VDDO
VDD
nQ3
nQ2
nQ1
nQ0
1
2
3
4
8
7
6
5
CLK
GND
nQ1
CLK
nQ2
ICS8304-01
8-Lead SOIC
3.8mm x 4.8mm x 1.47mm package body
M Package
nQ3
Top View
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
1
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 1. PIN DESCRIPTIONS
Number
Name
VDDO
VDD
Type
Description
1
2
3
4
5
6
7
8
Power
Power
Input
Output supply pin.
Core supply pin.
CLK
GND
nQ0
nQ1
nQ2
nQ3
Pulldown LVCMOS / LVTTL clock input.
Power supply ground.
Power
Output
Output
Output
Output
Inverted version of clock input. LVCMOS / LVTTL interface levels.
Inverted version of clock input. LVCMOS / LVTTL interface levels.
Inverted version of clock input. LVCMOS / LVTTL interface levels.
Inverted version of clock input. LVCMOS / LVTTL interface levels.
NOTE: Pulldown refers to internal input resistors. See Table 2, Pin Characteristics, for typical values.
TABLE 2. PIN CHARACTERISTICS
Symbol
Parameter
Test Conditions
Minimum
Typical
Maximum Units
CIN
Input Capacitance
4
pF
Power Dissipation Capacitance
(per output)
CPD
VDD, VDDO = 3.465V
15
pF
RPULLDOWN Input Pulldown Resistor
51
7
kΩ
ROUT
Output Impedance
Ω
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
2
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
ABSOLUTE MAXIMUM RATINGS
SupplyVoltage, VDDX
Inputs, VDD
4.6V
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device.These ratings are stress specifications only.Functional
operation of product at these conditions or any conditions be-
yond those listed in the DC Characteristics or AC Character-
istics is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect product reliability.
-0.5V to VDD + 0.5 V
-0.5V to VDDO + 0.5V
Outputs,VDDO
PackageThermal Impedance, θJA 112.7°C/W (0 lfpm)
StorageTemperature, TSTG -65°C to 150°C
TABLE 3A. POWER SUPPLY DC CHARACTERISTICS, VDD = VDDO = 3.3V 5ꢀ, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
3.135
Typical
3.3
Maximum Units
VDD
VDDO
IDD
Core Supply Voltage
3.465
3.465
15
V
Output Power Supply Voltage
Power Supply Current
3.135
3.3
V
mA
mA
IDDO
Output Supply Current
8
TABLE 3B. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = VDDO = 3.3V 5ꢀ, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum Units
VIH
VIL
IIH
Input High Voltage
2
VDD + 0.3
1.3
V
V
Input Low Voltage
-0.3
Input High Current
VDD = VIN = 3.465V
150
µA
µA
V
IIL
Input Low Current
VDD = 3.465V, VIN = 0V
-5
VOH
VOL
Output High Voltage; NOTE 1
Output Low Voltage; NOTE 1
2.6
0.5
V
NOTE 1: Outputs terminated with 50Ω to VDDO/2. See Parameter Measurement Information Section",
"3.3V Output Load Test Circuit".
TABLE 4A. AC CHARACTERISTICS, VDD = VDDO = 3.3V 5ꢀ, TA = 0°C TO 70°C
Symbol Parameter
fMAX Output Frequency
tPD
Test Conditions
Minimum
Typical
Maximum
166
Units
MHz
ns
Propagation Delay; NOTE 1
Output Skew; NOTE 2, 4
Part-to-Part Skew; NOTE 3, 4
Output Rise Time
IJ 166MHz
2.3
3.5
tsk(o)
tsk(pp)
tR
50
ps
600
ps
30ꢀ to 70ꢀ
30ꢀ to 70ꢀ
f ≤ 166MHz
250
250
40
500
ps
tF
Output Fall Time
500
ps
odc
Output Duty Cycle
60
ꢀ
All parameters measured at 166MHz unless noted otherwise.
NOTE 1: Measured from VDD/2 of the input to VDDO/2 of the output. Measured from the rising edge of
the input to the falling edge of the output.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at VDDO/2.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages
and with equal load conditions. Using the same type of inputs on each device, the outputs are measured
at VDDO/2.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
3
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 3C. POWER SUPPLY DC CHARACTERISTICS, VDD = 3.3V 5ꢀ, VDDO = 2.5V 5ꢀ, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
3.135
Typical
3.3
Maximum Units
VDD
VDDO
IDD
Core Supply Voltage
3.465
2.625
15
V
Output Supply Voltage
Power Supply Current
Output Supply Current
2.375
2.5
V
mA
mA
IDDO
8
TABLE 3D. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = 3.3V 5ꢀ, VDDO = 2.5V 5ꢀ, TA = 0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum Units
VIH
VIL
IIH
Input High Voltage
2
VDD + 0.3
1.3
V
V
Input Low Voltage
-0.3
Input High Current
VDD = VIN = 3.465V
150
µA
µA
V
IIL
Input Low Current
VDD = 3.465V, VIN = 0V
-5
VOH
VOL
Output High Voltage; NOTE 1
Output Low Voltage; NOTE 1
2.1
0.5
V
NOTE 1: Outputs terminated with 50Ω to VDDO/2. See Parameter Measurement Information Section,
"3.3V/2.5V Output Load Test Circuit".
TABLE 4B. AC CHARACTERISTICS, VDD = 3.3V 5ꢀ, VDDO = 2.5V 5ꢀ, TA = 0°C TO 70°C
Symbol Parameter
fMAX Maximum Output Frequency
tPD
Test Conditions
Minimum Typical Maximum Units
166
3.6
50
MHz
ns
Propagation Delay; NOTE 1
Output Skew; NOTE 2, 4
Part-to-Part Skew; NOTE 3, 4
Output Rise Time
IJ 166MHz
2.5
tsk(o)
tsk(pp)
tR
ps
600
500
500
60
ps
30ꢀ to 70ꢀ
30ꢀ to 70ꢀ
f ≤ 166MHz
250
250
40
ps
tF
Output Fall Time
ps
odc
Output Duty Cycle
ꢀ
All parameters measured at 166MHz unless noted otherwise.
NOTE 1: Measured from VDD/2 of the input to VDDO/2 of the output. Measured from the rising edge of
the input to the falling edge of the output.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at VDDO/2.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages
and with equal load conditions. Using the same type of inputs on each device, the outputs are measured
at VDDO/2.
NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
4
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
PARAMETER MEASUREMENT INFORMATION
1.65V 5ꢀ
1.25V 5ꢀ
2.05V 5ꢀ
SCOPE
SCOPE
VDD
VDD
,
VDDO
VDDO
Qx
Qx
LVCMOS
LVCMOS
GND
GND
VDDO
2
VDDO
2
-1.65V 5ꢀ
-1.25V 5ꢀ
3.3V OUTPUT LOAD AC TEST CIRCUIT
3.3V/2.5V OUTPUT LOAD AC TEST CIRCUIT
nQx
nQx
VDDO
VDDO
2
PART 1
2
VDDO
VDDO
2
nQy
nQy
2
tsk(o)
PART 2
tsk(pp)
OUTPUT SKEW
PART-TO-PART SKEW
VDD
2
70ꢀ
tF
70ꢀ
CLK
30ꢀ
30ꢀ
nQ0:nQ3
Clock
VDDO
tR
Outputs
2
tPD
OUTPUT RISE/FALL TIME
PROPAGATION DELAY
nQ0:nQ3
VDDO
2
tPW
t
PERIOD
OUTPUT DUTY CYLE/PULSE WIDTH/PERIOD
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
5
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
RELIABILITY INFORMATION
TABLE 5. θJAVS. AIR FLOW TABLE FOR 8 LEAD SOIC
θJA byVelocity (Linear Feet per Minute)
0
200
128.5°C/W
103.3°C/W
500
115.5°C/W
97.1°C/W
Single-Layer PCB, JEDEC Standard Test Boards
Multi-Layer PCB, JEDEC Standard Test Boards
153.3°C/W
112.7°C/W
NOTE: Most modern PCB designs use multi-layered boards.The data in the second row pertains to most designs.
TRANSISTOR COUNT
The transistor count for ICS8304-01 is: 416
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
6
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
PACKAGE OUTLINE - SUFFIX M FOR 8 LEAD SOIC
TABLE 6. PACKAGE DIMENSIONS - SUFFIX M
Millimeters
MINIMUN MAXIMUM
SYMBOL
N
A
A1
B
C
D
E
e
8
1.35
0.10
0.33
0.19
4.80
3.80
1.75
0.25
0.51
0.25
5.00
4.00
1.27 BASIC
H
h
5.80
0.25
0.40
0°
6.20
0.50
1.27
8°
L
α
Reference Document: JEDEC Publication 95, MS-012
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
7
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 6. ORDERING INFORMATION
Part/Order Number
ICS8304AM-01
Marking
8304AM01
8304AM01
8304A01L
8304A01L
Package
8 lead SOIC
Shipping Packaging Temperature
tube
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
ICS8304AM-01T
ICS8304AM-01LF
ICS8304AM-01LFT
8 lead SOIC
2500 tape & reel
tube
8 lead "Lead-Free" SOIC
8 lead "Lead-Free" SOIC
2500 tape & reel
NOTE: Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
The aforementioned trademark, HiPerClockS™ is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries.
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use
or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use
in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are
not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS
product for use in life support devices or critical medical instruments.
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
8
ICS8304-01
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
Integrated
Circuit
Systems, Inc.
REVISION HISTORY SHEET
Description of Change
Rev
Table
Page
Date
4A
3
AC Characteristics Table - revised tpLH row to tPD and revised NOTE 1.
Deleted tpHL row.
B
4B
4
4/9/02
AC Characteristics Table - revised tpLH row to tPD and revised NOTE 1.
Deleted tpHL row.
Updated Figures.
6 & 7
AC Characteristics Table - changed tsk(pp) Part-to-Part Skew from 250ps Max.
to 600ps Max.
4A
4B
3
4
C
C
5/20/02
6/17/02
AC Characteristics Table - changed tsk(pp) Part-to-Part Skew from 250ps Max.
to 600ps Max.
6
10
2
Ordering Information, updated marking from 8304-01 to 8304AM01
T1
Pin Descripiton Table - revised VDD description to read "Core supply pin."
(Also changed in Power Supply tables.) Deleted Pullup from note.
T2
T6
2
Pin Characteristics Table -CIN changed 4pF max. to 4pF typical.
Deleted RPULLUP row.
D
D
3/1/04
10
Ordering Information Table - changed Part/Order number ICS8304M-01/-01T
to ICS8304AM-01/-01T.
Updated format throughout data sheet.
Features Section - added Lead-Free bullet.
Ordering Information Table - add Lead-Free parts.
1
8
5/23/05
T6
8304AM-01
www.icst.com/products/hiperclocks.html
REV. D MAY 23, 2005
9
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明