ICS552G-02IT [IDT]
Low Skew Clock Driver, 552 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 4.40 MM, 0.65 MM PITCH, MO-153, TSSOP-16;型号: | ICS552G-02IT |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | Low Skew Clock Driver, 552 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 4.40 MM, 0.65 MM PITCH, MO-153, TSSOP-16 复用器 输入元件 时钟 |
文件: | 总7页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATASHEET
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
ICS552-02
Description
Features
The ICS552-02 is a low skew, single-input to eight-
output clock buffer. The device offers a dual input with
pin select for switching between two clock sources. It is
part of IDT’s ClockBlocksTM family. See the ICS553 for
a 1 to 4 low skew buffer. For more than 8 outputs see
the MK74CBxxx BuffaloTM series of clock drivers.
•
•
•
•
•
•
•
•
•
•
Extremely low skew outputs (50ps maximum)
Packaged in 16 pin TSSOP
Available in Pb (lead) free package
Low power CMOS technology
Operating Voltages of 2.5 V to 5 V
Output Enable pin tri-states outputs
5 V tolerant input clocks
IDT makes many non-PLL and PLL based low skew
output devices as well as Zero Delay Buffers to
synchronize clocks. Contact us for all of your clocking
needs.
Input/Output clock frequency up to 200 MHz
Input clock multiplexer simplifies clock selection
Industrial temperature
NOTE: EOL for non-green parts to occur on
5/13/10 per PDN U-09-01
Block Diagram
Q0
Q1
Q2
Q3
Q4
Q5
Q6
Q7
INA
INB
1
0
SELA
OE
IDT™ / ICS™ LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
1
ICS552-02
REV K 092309
ICS552-02
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
CLOCK MUX AND BUFFER
Pin Assignment
Input Source Select
SELA
Input
INB
OE
VDD
Q0
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
SELA
VDD
Q7
0
1
INA
Q1
Q6
Q2
Q5
Q3
Q4
GND
INB
GND
INA
16 Pin TSSOP
Pin Descriptions
Pin
Number
Pin
Name
OE
Pin
Type
Pin Description
1
Input
Output Enable. Tri-states outputs when low. Internal pull-up resistor.
2
VDD
Q0
Power Connect to +2.5V, +3.3V or +5.0V. Must be the same as pin 15.
Output Clock Output 0
3
4
Q1
Output Clock Output 1
5
Q2
Output Clock Output 2
6
Q3
Output Clock Output 3
7
GND
INB
INA
GND
Q4
Power Connect to ground.
8
Input
Input
Clock Input B. 5V tolerant input.
Clock Input A. 5V tolerant input.
9
10
11
12
13
14
15
16
Power Connect to ground.
Output Clock Output 4
Q5
Output Clock Output 5
Q6
Output Clock Output 6
Q7
Output Clock Output 7
VDD
SELA
Power Connect to + 2.5V, +3.3V or +5.0V. Must be the same as pin 2.
Input
Selects either INA or INB. Internal pull-up resistor.
External Components
A minimum number of external components are required for proper operation. Decoupling capacitors of
0.01 µF should be connected between VDD on pin 2 and GND on pin 7, and between VDD on pin 15 and
GND on pin 10, as close to the device as possible. A 33 Ωseries terminating resistor should be used on
each clock output if the trace is longer than 1 inch.
To achieve the low output skews that the ICS552-02 is capable of, careful attention must be paid to board
layout. Essentially, all 8 outputs must have identical terminations, identical loads, and identical trace
geometries. If they do not, the output skew will be degraded. For example, using a 30Ω series termination
on one output (with 33Ωon the others) will cause at least 15ps of skew.
IDT™ / ICS™ LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
2
ICS552-02
REV K 092309
ICS552-02
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
CLOCK MUX AND BUFFER
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the ICS552-02. These ratings,
which are standard values for IDT commercially rated parts, are stress ratings only. Functional operation of
the device at these or any other conditions above those indicated in the operational sections of the
specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can
affect product reliability. Electrical parameters are guaranteed only over the recommended operating
temperature range.
Item
Rating
Supply Voltage, VDD
SELA, OE, and all Outputs
INA and INB
7 V
-0.5 V to VDD+0.5 V
-0.5V to 5.5V
-40 to +85 ° C
-65 to +150 ° C
175 ° C
Ambient Operating Temperature
Storage Temperature
Junction Temperature
Soldering Temperature
260 ° C
Recommended Operation Conditions
Parameter
Min.
Typ.
Max.
+85
Units
° C
Ambient Operating Temperature
Power Supply Voltage (measured in respect to GND)
-40
–
+2.375
+5.25
V
DC Electrical Characteristics
VDD=2.5 V 5%, Ambient temperature -40 to +85 °C, unless stated otherwise
Parameter
Operating Voltage
Symbol
VDD
VIH
Conditions
Min.
2.375
Typ.
Max.
Units
2.625
5.5
V
V
Input High Voltage, INA, INB
Input Low Voltage, INA, INB
Input High Voltage, OE, SELA
Input Low Voltage, OE, SELA
Output High Voltage
Note 1
Note 1
VDD/2+0.5
VIL
VDD/2-0.5
VDD
V
VIH
1.8
2
V
VIL
0.7
V
VOH
VOL
IDD
IOS
IOH = -16 mA
IOL = 16 mA
V
Output Low Voltage
0.4
V
Operating Supply Current
Short Circuit Current
No load, 135 MHz
Each output
35
60
mA
mA
IDT™ / ICS™ LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
3
ICS552-02
REV K 092309
ICS552-02
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
CLOCK MUX AND BUFFER
DC Electrical Characteristics (continued)
VDD=3.3 V 5%, Ambient temperature -40 to +85 °C, unless stated otherwise
Parameter
Operating Voltage
Symbol
VDD
VIH
Conditions
Min.
3.135
Typ.
Max.
3.465
5.5
Units
V
V
V
V
V
V
V
V
Input High Voltage, INA, INB
Input Low Voltage, INA, INB
Input High Voltage, OE, SELA
Input Low Voltage, OE, SELA
Output High Voltage
Note 1
Note 1
VDD/2+0.7
VIL
VDD/2-0.7
VDD
VIH
2
VIL
0.8
VOH
VOL
IOH = -25 mA
IOH = 25 mA
IOH = -12 mA
2.4
Output Low Voltage
0.4
Output High Voltage (CMOS
Level)
VOH
VDD-0.4
Operating Supply Current
Short Circuit Current
IDD
IOS
No load, 135 MHz
Each output
50
80
mA
mA
VDD=5 V 5%, Ambient temperature -40 to +85 ° C, unless stated otherwise
Parameter
Operating Voltage
Symbol
VDD
VIH
Conditions
Min.
4.75
Typ.
Max.
5.25
Units
V
V
V
V
V
V
V
V
Input High Voltage, INA, INB
Input Low Voltage, INA, INB
Input High Voltage, OE, SELA
Input Low Voltage, OE, SELA
Output High Voltage
Note 1
Note 1
VDD/2+1
5.5
VIL
VDD/2-1
VDD
0.8
VIH
2
VIL
VOH
VOL
IOH = -35 mA
IOL = 35 mA
IOH = -12 mA
2.4
Output Low Voltage
0.4
Output High Voltage (CMOS
Level)
VOH
VDD-0.4
Operating Supply Current
Short Circuit Current
IDD
IOS
No load, 135 MHz
Each output
85
mA
mA
100
Note: 1. Nominal switching threshold is VDD/2
IDT™ / ICS™ LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
4
ICS552-02
REV K 092309
ICS552-02
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
CLOCK MUX AND BUFFER
AC Electrical Characteristics
VDD = 2.5V 5%, Ambient Temperature -40 to +85 ° C, unless stated otherwise
Parameter
Input Frequency
Symbol
Conditions
Min.
Typ. Max. Units
0
200
1.5
1.5
MHz
ns
Output Rise Time
tOR
0.8 to 2.0 V, CL=15 pF
2.0 to 0.8 V, CL=15 pF
1.0
1.0
3.5
0
Output Fall Time
tOF
ns
Propagation Delay
Output to output skew
Input A to Input B skew
Note 1
Note 2
Note 3
ns
Rising edges at VDD/2
50
50
ps
0
ps
VDD = 3.3V 5%, Ambient Temperature -40 to +85 ° C, unless stated otherwise
Parameter
Input Frequency
Symbol
Conditions
Min.
Typ. Max. Units
0
200
1.0
1.0
5.5
50
MHz
ns
Output Rise Time
Output Fall Time
tOR
0.8 to 2.0 V, CL=15 pF
2.0 to 0.8 V, CL=15 pF
0.6
0.6
3.0
0
tOF
ns
Propagation Delay
Output to output skew
Input A to Input B skew
Part to Part Skew
Note 1
Note 2
Note 3
2.0
ns
Rising edges at VDD/2
ps
0
50
ps
3.5
ns
VDD = 5.0V 5%, Ambient Temperature -40 to +85 ° C, unless stated otherwise
Parameter
Input Frequency
Symbol
Conditions
Min.
Typ. Max. Units
0
200
0.7
0.7
MHz
ns
Output Rise Time
tOR
0.8 to 2.0 V, CL=15 pF
2.0 to 0.8 V, CL=15 pF
0.3
0.3
2.8
0
Output Fall Time
tOF
ns
Propagation Delay
Output to output skew
Input A to Input B skew
Note 1
Note 2
Note 3
ns
Rising edges at VDD/2
50
50
ps
0
ps
Notes: 1. With rail-to-rail input clock.
2. Between any two outputs with equal loading.
3. Propagation delay matching through the part.
4. Duty cycle on outputs will match incoming clock duty cycle. Consult IDT for tight duty cycle clock
generators.
IDT™ / ICS™ LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
5
ICS552-02
REV K 092309
ICS552-02
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
CLOCK MUX AND BUFFER
Package Outline and Package Dimensions (16 pin TSSOP, 4.40 mm Body, 0.65 mm Pitch)
Package dimensions are kept current with JEDEC Publication No. 95, MO-153
16
Millimeters
Min Max
Inches
Max
Symbol
Min
--
A
A1
A2
b
--
1.20
0.15
1.05
0.30
0.20
5.1
0.047
0.006
0.041
0.012
E1
E
0.05
0.80
0.19
0.09
4.90
0.002
0.032
0.007
INDEX
AREA
C
0.0035 0.008
0.193 0.201
0.252 BASIC
0.169 0.177
0.0256 Basic
0.018 0.030
D
1
2
E
6.40 BASIC
E1
e
4.30
4.50
D
0.65 Basic
L
0.45
0.75
α
0
°
8°
0°
8°
aaa
--
0.10
--
0.004
A
2
A
A
1
c
- C -
e
SEATING
PLANE
α
b
L
aaa
C
Ordering Information
Part / Order Number
552G-02I*
Marking
Shipping Packaging
Tubes
Package
Temperature
-40 to +85 °C
-40 to +85 °C
-40 to +85 °C
-40 to +85 °C
552G-02I
552G-02I
16-pin TSSOP
16-pin TSSOP
16-pin TSSOP
16-pin TSSOP
552G-02IT*
Tape and Reel
Tubes
552G-02ILN
552G02IN
552G02IN
552G-02ILNT
Tape and Reel
*NOTE: EOL for non-green parts to occur on 5/13/10 per PDN U-09-01
Parts that are ordered with an “LN” suffix to the part number are the Pb-Free configuration and are RoHS
compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT)
assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result
from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial
applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary
environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or
critical medical instruments.
IDT™ / ICS™ LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
6
ICS552-02
REV K 092309
ICS552-02
LOW SKEW 2 INPUT MUX AND 1 TO 8 CLOCK BUFFER
CLOCK MUX AND BUFFER
Innovate with IDT and accelerate your future networks. Contact:
www.IDT.com
For Sales
800-345-7015
408-284-8200
Fax: 408-284-2775
For Tech Support
www.idt.com/go/clockhelp
Corporate Headquarters
Integrated Device Technology, Inc.
www.idt.com
© 2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device
Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered
trademarks used to identify products or services of their respective owners.
Printed in USA
相关型号:
ICS552G-02LF
Low Skew Clock Driver, 552 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.173 INCH, TSSOP-16
IDT
ICS552G-03I
Low Skew Clock Driver, 552 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.173 INCH, TSSOP-16
IDT
ICS552G-03IT
Low Skew Clock Driver, 552 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.173 INCH, TSSOP-16
IDT
ICS552G-03LFT
Low Skew Clock Driver, 552 Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.173 INCH, 0.65 MM PITCH, TSSOP-16
IDT
©2020 ICPDF网 联系我们和版权申明