ICS8304G-01T [IDT]
Low Skew Clock Driver, 0 True Output(s), 4 Inverted Output(s), PDSO8, TSSOP-8;型号: | ICS8304G-01T |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | Low Skew Clock Driver, 0 True Output(s), 4 Inverted Output(s), PDSO8, TSSOP-8 光电二极管 |
文件: | 总6页 (文件大小:86K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PRELIMINARY
ICS8304-01
Integrated
Circuit
Systems, Incꢀ
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
GENERAL DESCRIPTION
FEATURES
The ICS8304-01 is a low skew, 1-to-4 Invert- • 4 LVCMOS / LVTTL outputs
,&6
ing Fanout Bufferand a member of the
HiPerClockS™ family of High Performance
Clock Solutions from ICS. The ICS8304-01
is characterized at full 3.3V for input VDD,
• Output frequency up to 166MHz
HiPerClockS™
• LVCMOS clock input
• 3.3V input, outputs may be either 3.3V or 2.5V supply modes
• Small 8 lead SOIC package saves board space
• 0°C to 70°C ambient operating temperature
• Industrial temperature version available upon request
and mixed 3.3V and 2.5V for output operating supply
modes (VDDO). Guaranteed output and part-to-part
skew characteristics make the ICS8304-01 ideal for
those clock distribution applications demanding well
defined performance and repeatability.
BLOCK DIAGRAM
PIN ASSIGNMENT
nQ0
VDDO
VDD
CLK
nQ3
nQ2
nQ1
nQ0
1
2
3
4
8
7
6
5
nQ1
GND
CLK
nQ2
ICS8304-01
8-Lead SOIC
3.8mm x 4.8mm x 1.47mm package body
M Package
nQ3
Top View
The Preliminary Information presented herein represents a product in prototyping or pre-production. The noted characteristics are based on initial
product characterization. Integrated Circuit Systems, Incorporated (ICS) reserves the right to change any circuitry or specifications without notice.
ICS8304AM-01
www.icst.com/products/hiperclocks.html
REV. A JUNE 20, 2001
1
PRELIMINARY
ICS8304-01
Integrated
Circuit
Systems, Incꢀ
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
TABLE 1. PIN DESCRIPTIONS
Number
Name
VDDO
VDD
CLK
Type
Description
1
2
3
4
5
6
7
8
Power
Power
Input
Power supply pin. Connect to 3.3V or 2.5V.
Power supply pin. Connect to 3.3V.
Pulldown Clock input. LVCMOS / LVTTL interface levels.
Power supply ground. Connect to ground.
GND
nQ3
Power
Output
Output
Output
Output
Inverted version of clock input. LVCMOS / LVTTL interface levels.
Inverted version of clock input. LVCMOS / LVTTL interface levels.
Inverted version of clock input. LVCMOS / LVTTL interface levels.
Inverted version of clock input. LVCMOS / LVTTL interface levels.
nQ2
nQ1
nQ0
NOTE: Pullup and Pulldown refers to internal input resistors. See Table 2, Pin Characterisicts, for typical value.
TABLE 2. PIN CHARACTERISTICS
Symbol
CIN
Parameter
Test Conditions
Minimum
Typical
Maximum Units
Input Capacitance CLK
Power Dissipation Capacitance
Input Pullup Resistor
4
pF
pF
KΩ
KΩ
Ω
CPD
TBD
51
RPULLUP
RPULLDOWN Input Pulldown Resistor
51
ROUT
Output Impedance
ICS8304AM-01
www.icst.com/products/hiperclocks.html
REV. A JUNE 20, 2001
2
PRELIMINARY
ICS8304-01
Integrated
Circuit
Systems, Incꢀ
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VDDx
Inputs, VI
4.6V
-0.5V to VDD+ 0.5V
-0.5V to VDDO + 0.5V
Outputs, VO
Package Thermal Impedance, θJA
112°C/W
Storage Temperature, TSTG
-65°C to 150°C
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These ratings
are stress specifications only. Functional operation of product at these conditions or any conditions beyond those listed in the
DC Characteristics or AC Characteristics is not implied. Exposure to absolute maximum rating conditions for extended peri-
ods may affect product reliability.
TABLE 3A. POWER SUPPLY DC CHARACTERISTICS, VDD = VDDO = 3.3V±5%, TA=0°C TO 70°C
Symbol
VDD
Parameter
Test Conditions
Minimum
3.135
Typical
3.3
Maximum Units
Power Supply Voltage
Output Power Supply Voltage
Power Supply Current
3.465
3.465
50
V
V
VDDO
GND
3.135
3.3
mA
TABLE 3B. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = VDDO = 3.3V±5%, TA=0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum Units
VIH
VIL
IIH
Input High Voltage
CLK
CLK
CLK
CLK
2
3.765
0.8
V
V
Input Low Voltage
Input High Current
Input Low Current
Output High Voltage
Output Low Voltage
-0.3
150
µA
µA
V
IIL
-5
VOH
VOL
V
TABLE 3C. POWER SUPPLY DC CHARACTERISTICS, VDD = 3.3V±5%, VDDO = 2.5V±5%, TA=0°C TO 70°C
Symbol
VDD
Parameter
Test Conditions
Minimum
3.135
Typical
3.3
Maximum Units
Power Supply Voltage
Output Power Supply Voltage
Power Supply Current
3.465
2.625
50
V
V
VDDO
GND
2.375
2.5
mA
TABLE 3D. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = 3.3V±5%, VDDO = 2.5V±5%, TA=0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum Units
VIH
VIL
IIH
Input High Voltage
CLK
CLK
CLK
CLK
2
3.765
0.8
V
V
Input Low Voltage
Input High Current
Input Low Current
Output High Voltage
Output Low Voltage
-0.3
150
µA
µA
V
IIL
-5
VOH
VOL
V
ICS8304AM-01
www.icst.com/products/hiperclocks.html
REV. A JUNE 20, 2001
3
PRELIMINARY
ICS8304-01
Integrated
Circuit
Systems, Incꢀ
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
TABLE 4. AC CHARACTERISTICS, VDD = 3.3V±5%, VDDO = 2.5V±5%, TA=0°C TO 70°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum
Units
fMAX
tpLH
Maximum Input Frequency
166
MHz
Propagation Delay, Low-to-High;
NOTE 1
Propagation Delay, High-to-Low;
NOTE 1
2.1
3.9
ns
ns
tpHL
tsk(o)
Output Skew; NOTE 2
30
52
ps
ps
ps
ps
ns
ps
ns
ns
ns
ns
tsk(pp) Part-to-Part; NOTE 3
250
tR
tF
Output Rise Time
Output Fall Time
30% to 70%
30% to 70%
670
900
f = 166MHz
2.5
3.3
tPW
Output Pulse Width
0Hz ≤ f ≤ 166MHz
tcycle/2 - 700
tcycle/2 tcycle/2 + 700
tEN
tDIS
tS
Output Enable Time; NOTE 4
Output Disable Time; NOTE 4
Clock Enable Setup Time
Clock Enable Hold Time
tH
All parameters measured at 166MHz unless noted otherwise.
NOTE 1: Measured from the differential input crossing point to the differential output crossing point.
NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at the output differential cross points.
NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages
and with equal load conditions. Using the same type of inputs on each device, the outputs are measured
at the differential cross points.
NOTE 4: Measured by triggering on input signal and measuring the largest displacement between output cycles.
ICS8304AM-01
www.icst.com/products/hiperclocks.html
REV. A JUNE 20, 2001
4
PRELIMINARY
ICS8304-01
Integrated
Circuit
Systems, Incꢀ
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
PACKAGE OUTLINE - SUFFIX M
N
C
8
1
5
4
L
H
E
hx45˚
D
α
A2
A
A1
e
SEATING
PLANE
B
.10 (.004)
TABLE 5. PACKAGE DIMENSIONS
Millimeters
SYMBOL
Inches
MINIMUN
MAXIMUM MINIMUN MAXIMUM
N
A
A1
B
C
D
E
e
8
1.35
0.10
0.33
0.19
4.80
3.80
1.75
0.25
0.51
0.25
5.00
4.00
0.532
0.0040
0.013
0.0688
0.0098
0.020
0.0075
0.1890
0.1497
0.0098
0.1968
0.1574
1.27 BASIC
0.050 BASIC
H
h
5.80
0.25
0.40
0°
6.20
0.50
1.27
8°
0.2284
0.010
0.016
0°
0.2440
0.020
0.050
8°
L
α
Reference Document: JEDEC Publication 95, MS-013, MO-119
ICS8304AM-01
www.icst.com/products/hiperclocks.html
REV. A JUNE 20, 2001
5
PRELIMINARY
ICS8304-01
Integrated
Circuit
Systems, Incꢀ
LOW SKEW, 1-TO-4
LVCMOS / LVTTL INVERTING FANOUT BUFFER
TABLE 6. ORDERING INFORMATION
Part/Order Number
ICS8304G-01
Marking
ICS4A01
Package
8 lead TSSOP
Count
100 per tube
2500
Temperature
0°C to 70°C
0°C to 70°C
0°C to 70°C
0°C to 70°C
ICS8304G-01T
ICS8304M-01
ICS4A01
8 lead TSSOP on Tape and Reel
8 lead SOIC
ICS8304-01
ICS8304-01
96 per tube
2500
ICS8304M-01T
8 lead SOIC on Tape and Reel
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use
or for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use
in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are
not recommended without additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS
product for use in life support devices or critical medical instruments.
ICS8304AM-01
www.icst.com/products/hiperclocks.html
REV. A JUNE 20, 2001
6
相关型号:
ICS8304M-01
Low Skew Clock Driver, 0 True Output(s), 4 Inverted Output(s), PDSO8, 3.80 X 4.80 MM, 1.47 MM HEIGHT, MS-012, SOIC-8
IDT
ICS8304M-01LF
Low Skew Clock Driver, 0 True Output(s), 4 Inverted Output(s), PDSO8, 3.80 X 4.80 MM, 1.47 MM HEIGHT, MS-012, SOIC-8
IDT
ICS8304M-01LFT
Low Skew Clock Driver, 0 True Output(s), 4 Inverted Output(s), PDSO8, 3.80 X 4.80 MM, 1.47 MM HEIGHT, MS-012, SOIC-8
IDT
ICS8304M-01T
Low Skew Clock Driver, 0 True Output(s), 4 Inverted Output(s), PDSO8, 3.80 X 4.80 MM, 1.47 MM HEIGHT, MS-012, SOIC-8
IDT
ICS83052AGI-01LF
Multiplexer, 83052 Series, 2-Func, 2 Line Input, 1 Line Output, True Output, PDSO16, 4.40 X 3 MM, 0.92 MM HEIGHT, MO-153, TSSOP-16
IDT
©2020 ICPDF网 联系我们和版权申明