ICS8624BYILFT [IDT]
PLL Based Clock Driver, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LQFP-32;型号: | ICS8624BYILFT |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | PLL Based Clock Driver, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LQFP-32 驱动 逻辑集成电路 |
文件: | 总15页 (文件大小:511K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
GENERAL DESCRIPTION
FEATURES
The ICS8624I is a high performance, 1-to-5
• Fully integrated PLL
ICS
HiPerClockS™
Differential-to-HSTL zero delay buffer and
a member of the HiPerClockS™ family of High
Performance Clock Solutions from ICS. The
ICS8624I has two selectable clock input pairs.
• Five differential HSTL compatible outputs
• Selectable differential CLKx, nCLKx input pairs
• CLKx, nCLKx pairs can accept the following differential
input levels: LVPECL, LVDS, HSTL, SSTL, HCSL
The CLK0, nCLK0 and CLK1, nCLK1 pair can accept most
standard differential input levels.The VCO operates at a fre-
quency range of 250MHz to 630MHz. Utilizing one of the
outputs as feedback to the PLL, output frequencies up to
630MHz can be regenerated with zero delay with respect to
the input. Dual reference clock inputs support redundant
clock or multiple reference applications.
• Output frequency range: 31.25MHz to 630MHz
• Input frequency range: 31.25MHz to 630MHz
• VCO range: 250MHz to 630MHz
• External feedback for “zero delay” clock regeneration
• Cycle-to-cycle jitter: 35ps (maximum)
• Output skew: 50ps (maximum)
• Static phase offset: 30ps 125ps
• 3.3V core, 1.8V output operating supply
• -40°C to 85°C ambient operating temperature
• Available in both standard and lead-free RoHS-compliant
packages
BLOCK DIAGRAM
PIN ASSIGNMENT
Q0
nQ0
PLL_SEL
Q1
nQ1
÷4, ÷8
0
1
32 31 30 29 28 27 26 25
CLK0
nCLK0
Q2
nQ2
0
1
1
2
3
4
5
6
7
8
24
23
22
21
20
19
18
17
SEL0
SEL1
VDDO
Q3
CLK1
nCLK1
Q3
nQ3
CLK0
nQ3
Q2
PLL
nCLK0
CLK1
Q4
nQ4
CLK_SEL
ICS8624I
nQ2
Q1
nCLK1
CLK_SEL
MR
FB_IN
nFB_IN
nQ1
VDDO
9
10 11 12 13 14 15 16
SEL0
SEL1
MR
32-Lead LQFP
7mm x 7mm x 1.4mm body package
Y Package
TopView
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
1
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 1. PIN DESCRIPTIONS
Number
Name
Type
Pulldown
Description
Determines the input and output frequency range noted in Table 3.
LVCMOS / LVTTL interface levels.
Determines the input and output frequency range noted in Table 3.
LVCMOS / LVTTL interface levels.
1
SEL0
Input
Input
2
SEL1
Pulldown
3
4
5
6
CLK0
nCLK0
CLK1
Input
Input
Input
Input
Pulldown Non-inverting differential clock input.
Pullup Inverting differential clock input.
Pulldown Non-inverting differential clock input.
nCLK1
Pullup
Inverting differential clock input.
Clock select input. When LOW, selects CLK0, nCLK0. When HIGH, selects
CLK1, nCLK1 inputs. LVCMOS / LVTTL interface levels.
Active HIGH Master Reset. When logic HIGH, the internal dividers are
reset causing the true outputs Qx to go low and the inverted outputs nQx
to go high. When logic LOW, the internal dividers and the outputs are
enabled. LVCMOS / LVTTL interface levels.
7
CLK_SEL
MR
Input
Pulldown
8
Input
Pulldown
9, 32
10
VDD
Power
Input
Input
Core supply pins.
nFB_IN
FB_IN
Pullup
Feedback input to phase detector for regenerating clocks with "zero delay".
11
Pulldown Feedback input to phase detector for regenerating clocks with "zero delay".
12, 13
28, 29
GND
Power
Output
Power
Output
Output
Output
Power supply ground.
Differential clock outputs. 50Ω typical output impedance.
HSTL interface levels.
14, 15
nQ0, Q0
VDDO
16, 17,
24, 25
Output supply pins.
Differential clock outputs. 50Wtypical output impedance.
HSTL interface levels.
Differential clock outputs. 50Ω typical output impedance.
HSTL interface levels.
Differential clock outputs. 50Ω typical output impedance.
HSTL interface levels.
18, 19
20, 21
22, 23
nQ1, Q1
nQ2, Q2
nQ3, Q3
Differential clock outputs. 50Ω typical output impedance.
HSTL interface levels.
26, 27
30
nQ4, Q4
VDDA
Output
Power
Analog supply pin.
Selects between the PLL and clock as the input to the dividers.
31
PLL_SEL
Input
Pullup
When HIGH, selects PLL. When LOW, selects reference clock.
LVCMOS / LVTTL interface levels.
NOTE 1: Pullup and Pulldown refer to internal input resistors. See Table 2, Pin Characteristics, for typical values.
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
2
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 2. PIN CHARACTERISTICS
Symbol
CIN
Parameter
Test Conditions
Minimum
Typical
Maximum Units
Input Capacitance
Input Pullup Resistor
Input Pulldown Resistor
4
pF
kΩ
kΩ
RPULLUP
RPULLDOWN
51
51
TABLE 3A. CONTROL INPUT FUNCTION TABLE
Inputs
Outputs
PLL_SEL = 1
PLL Enable Mode
SEL1
SEL0
Reference Frequency Range (MHz)*
Q0:Q4, nQ0:nQ4
0
0
1
1
0
1
0
1
250 - 630
125 - 315
÷ 1
÷ 1
÷ 1
÷ 1
62.5 - 157.5
31.25 - 78.75
*NOTE: VCO frequency range for all configurations above is 250MHz to 700MHz.
TABLE 3B. PLL BYPASS FUNCTION TABLE
Outputs
Inputs
PLL_SEL = 0
PLL Bypass Mode
SEL1
SEL0
Q0:Q4, nQ0:nQ4
0
0
1
1
0
1
0
1
÷ 4
÷ 4
÷ 4
÷ 8
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
3
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
ABSOLUTE MAXIMUM RATINGS
SupplyVoltage, V
4.6V
NOTE: Stresses beyond those listed under Absolute
Maximum Ratings may cause permanent damage to the
device.These ratings are stress specifications only.Functional
operation of product at these conditions or any conditions be-
yond those listed in the DC Characteristics or AC Character-
istics is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect product reliability.
DD
Inputs, V
-0.5V to VDD + 0.5V
I
Outputs, IO
Continuous Current
Surge Current
50mA
100mA
PackageThermal Impedance, θ
47.9°C/W (0 lfpm)
-65°C to 150°C
JA
StorageTemperature, T
STG
TABLE 4A. POWER SUPPLY DC CHARACTERISTICS, VDD = VDDA = 3.3V 5ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter
Test Conditions
Minimum
3.135
3.135
1.6
Typical
3.3
Maximum Units
VDD
VDDA
VDDO
IDD
Core Supply Voltage
3.465
3.465
2.0
V
V
Analog Supply Voltage
Output Supply Voltage
Power Supply Current
Analog Supply Current
Output Supply Current
3.3
1.8
V
120
mA
mA
mA
IDDA
IDDO
15
No Load
0
TABLE 4B. LVCMOS / LVTTL DC CHARACTERISTICS, VDD = VDDA = 3.3V 5ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter Test Conditions Minimum Typical Maximum Units
VIH
VIL
Input High Voltage
2
VDD + 0.3
0.8
V
V
Input Low Voltage
-0.3
SEL0, SEL1,
CLK_SEL, MR
V
DD = VIN = 3.465V
VDD = VIN = 3.465V
DD = 3.465V, VIN = 0V
150
5
µA
µA
µA
µA
IIH
Input High Current
PLL_SEL
SEL0, SEL1,
CLK_SEL, MR
V
-5
IIL
Input Low Current
PLL_SEL
VDD = 3.465V, VIN = 0V
-150
TABLE 4C. DIFFERENTIAL DC CHARACTERISTICS, VDD = VDDA = 3.3V 5ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter
IIH Input High Current
Test Conditions
Minimum Typical Maximum Units
CLK0, CLK1, FB_IN
nCLK0, nCLK1, nFB_IN
CLK0, CLK1, FB_IN
nCLK0, nCLK1, nFB_IN
VDD = VIN = 3.465V
150
5
µA
µA
µA
µA
V
V
DD = VIN = 3.465V
VDD = 3.465V, VIN = 0V
DD = 3.465V, VIN = 0V
-5
IIL
Input Low Current
V
-150
0.15
0.5
VPP
Peak-to-Peak Input Voltage
1.3
VCMR
Common Mode Input Voltage; NOTE 1, 2
VDD - 0.85
V
NOTE 1: For single ended applications, the maximum input voltage for CLKx, nCLKx is VDD + 0.3V.
NOTE 2: Common mode voltage is defined as VIH.
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
4
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 4D. HSTL DC CHARACTERISTICS, VDD = VDDA = 3.3V 5ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter Test Conditions Minimum Typical Maximum Units
VOH
Output High Voltage; NOTE 1
1.0
0
1.4
0.4
60
V
V
VOL
Output Low Voltage; NOTE 1
VOX
Output Crossover Voltage; NOTE 2
Peak-to-Peak Output Voltage Swing
40
0.6
ꢀ
V
VSWING
1.1
NOTE 1: Outputs terminated with 50Ω to ground.
NOTE 2: Defined with respect to output voltage swing at a given condition.
TABLE 5. INPUT FREQUENCY CHARACTERISTICS, VDD = VDDA = 3.3V 5ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter
fIN Input Frequency
Test Conditions
PLL_SEL = 1
PLL_SEL = 0
Minimum Typical Maximum Units
31.25
630
630
MHz
MHz
CLK0, nCLK0,
CLK1, nCLK1
TABLE 6A. AC CHARACTERISTICS, VDD = VDDA = 3.3V 5ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter
fMAX Output Frequency
tPD
Test Conditions
Minimum
Typical
Maximum
630
4.5
Units
MHz
ns
Propagation Delay; NOTE 1
Static Phase Offset; NOTE 2, 5
Output Skew; NOTE 3, 5
Cycle-to-Cycle Jitter; NOTE 5, 6
Phase Jitter; NOTE 4, 5, 6
PLL Lock Time
IJ 630MHz
PLL_SEL = 3.3V
3.4
-95
3.9
30
t(Ø)
tsk(o)
tjit(cc)
tjit(Ø)
tL
155
50
ps
ps
35
ps
50
ps
1
ms
ps
tR
Output Rise Time
20ꢀ to 80ꢀ
20ꢀ to 80ꢀ
300
300
700
700
tF
Output Fall Time
ps
tPW
Output Pulse Width
tPeriod/2 - 85 tPeriod/2 tPeriod/2+ 85
ps
All parameters measured at fMAX unless noted otherwise.
NOTE 1: Measured from the differential input crossing point to the differential output crossing point.
NOTE 2: Defined as the time difference between the input reference clock and the averaged feedback input signal
across all conditions, when the PLL is locked and the input reference frequency is stable.
NOTE 3: Defined as skew between outputs at the same supply voltage and with equal load conditions.
Measured at output differential cross points.
NOTE 4: Phase jitter is dependent on the input source used.
NOTE 5: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 6: Characterized at VCO frequency of 622MHz.
TABLE 6B. AC CHARACTERISTICS, VDD = VDDA = 3.3V 10ꢀ, VDDO = 1.8V 0.2V, TA = -40°C TO 85°C
Symbol Parameter
tjit(cc) Cycle-to-Cycle Jitter; NOTE 1
NOTE 1: This parameter is defined in accordance with JEDEC Standard 65.
Test Conditions
Minimum
Typical
Maximum
Units
40
ps
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
5
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
PARAMETER MEASUREMENT INFORMATION
1.8V 0.2V
3.3V 5ꢀ
or 10ꢀ
VDD
SCOPE
,
VDD
VDDA
Qx
nCLK0,
nCLK1
VDDO
VPP
VCMR
Cross Points
HSTL
CLK0,
CLK1
nQx
GND
GND = 0V
3.3V CORE/1.8V OUTPUT LOAD AC TEST CIRCUIT
DIFFERENTIAL INPUT LEVEL
nQx
Qx
nQx
nQ
➤
➤
tcycle n
tcycle n+1
➤
➤
nQy
Qy
tjit(cc) = tcycle n –tcycle n+1
tsk(o)
1000 Cycles
CYCLE-TO-CYCLE JITTER
OUTPUT SKEW
nCLK0,
VOH
VOL
nCLK1
CLK0,
CLK1
VOH
VOL
nFB_IN
80ꢀ
tF
80ꢀ
tR
VOD
FB_IN
➤
Clock
Outputs
t(Ø)
20ꢀ
20ꢀ
➤
tjit(Ø) = t(Ø) — t(Ø) mean = Phase Jitter
t(Ø) mean = Static Phase Offset
(where t(Ø) is any random sample, and t(Ø) mean is the average
of the sampled cycles measured on controlled edges)
OUTPUT RISE/FALL TIME
PHASE JITTER AND STATIC PHASE OFFSET
nCLK0,
nCLK1
nQ0:nQ4
VDDO
2
VDDO
2
VDDO
2
Q0:Q4
CLK0,
CLK1
Pulse Width
nQ0:nQ4
tPERIOD
Q0:Q4
tPD
OUTPUT PULSE WIDTH/PERIOD
PROPAGATION DELAY
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
6
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
APPLICATION INFORMATION
POWER SUPPLY FILTERING TECHNIQUES
As in any high speed analog circuitry, the power supply pins
are vulnerable to random noise.The ICS8624I provides sepa-
rate power supplies to isolate any high switching
noise from the outputs to the internal PLL.VDD, VDDA, and VDDO
should be individually connected to the power supply
plane through vias, and bypass capacitors should be
used for each pin. To achieve optimum jitter performance,
power supply isolation is required. Figure 1 illustrates how
a 10Ω resistor along with a 10μF and a .01μF bypass
capacitor should be connected to each VDDA pin.
3.3V
VDD
.01μF
.01μF
10Ω
VDDA
10μF
FIGURE 1. POWER SUPPLY FILTERING
WIRING THE DIFFERENTIAL INPUT TO ACCEPT SINGLE ENDED LEVELS
Figure 2 shows how the differential input can be wired to accept of R1 and R2 might need to be adjusted to position theV_REF in
single ended levels. The reference voltage V_REF = VDD/2 is the center of the input voltage swing. For example, if the input
generated by the bias resistors R1, R2 and C1.This bias circuit clock swing is only 2.5V andVDD = 3.3V, V_REF should be 1.25V
should be located as close as possible to the input pin.The ratio and R2/R1 = 0.609.
VDD
R1
1K
Single Ended Clock Input
CLKx
V_REF
nCLKx
C1
0.1u
R2
1K
FIGURE 2. SINGLE ENDED SIGNAL DRIVING DIFFERENTIAL INPUT
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
7
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
RECOMMENDATIONS FOR UNUSED INPUT AND OUTPUT PINS
INPUTS:
OUTPUTS:
CLK/nCLK INPUT:
HSTL OUTPUT
For applications not requiring the use of the differential input, All unused HSTL outputs can be left floating. We recommend
both CLK and nCLK can be left floating. Though not required, that there is no trace attached. Both sides of the differential
but for additional protection, a 1kΩ resistor can be tied from output pair should either be left floating or terminated.
CLK to ground.
LVCMOS CONTROL PINS:
All control pins have internal pull-ups or pull-downs; additional
resistance is not required but can be added for additional
protection. A 1kΩ resistor can be used.
LAYOUT GUIDELINE
The schematic of the ICS8624I layout example is shown in will depend on the selected component types, the density of
Figure 3A. The ICS8624I recommended PCB board layout for the components, the density of the traces, and the stack up
this example is shown in Figure 3B. This layout example is of the P.C. board.
used as a general guideline. The layout in the actual system
VDD
SP = Space (i.e. not intstalled)
R7
VDD
VDDA
RU2
SP
RU3
1K
RU4
1K
RU5
SP
10
C11
0.01u
VDD=3.3V
C16
10u
VDDO=1.8V
CLK_SEL
PLL_SEL
SEL0
SEL1
Zo = 50 Ohm
Zo = 50 Ohm
155.5 MHz
DIV_SEL[1:0] = 01
+
-
VDDO
RD2
1K
RD3
SP
RD4
SP
RD5
LVHSTL_input
1K
VDD
U1
R4A
50
R4B
50
3.3V
(155.5 MHz)
Zo = 50 Ohm
SEL0
SEL1
1
2
3
4
5
6
7
8
24
23
22
21
20
19
18
17
SEL0
SEL1
VDDO
Q3
nQ3
Q2
nQ2
Q1
nQ1
VDDO
CLK0
nCLK0
CLK1
nCLK2
CLK_SEL
MR
Bypass capacitor located near the power pins
Zo = 50 Ohm
CLK_SEL
VDD
(U1-9)
(U1-32)
3.3V PECL Driver
C1
0.1uF
C6
0.1uF
R8
50
R9
50
8624
VDDO
(U1-16)
(U1-17)
(U1-24)
(U1-25)
R10
50
R2B
50
R2A
50
C2
0.1uF
C4
0.1uF
C5
0.1uF
C7
0.1uF
FIGURE 3A. ICS8624I HSTL ZERO DELAY BUFFER SCHEMATIC EXAMPLE
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
8
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
The following component footprints are used in this layout
example:
trace delay might be restricted by the available space on the board
and the component location.While routing the traces, the clock
signal traces should be routed first and should be locked prior to
routing other signal traces.
All the resistors and capacitors are size 0603.
POWER AND GROUNDING
• The differential 50Ω output traces should have same
Place the decoupling capacitors C1, C6, C2, C4, and C5, as
close as possible to the power pins. If space allows, placement
of the decoupling capacitor on the component side is preferred.
This can reduce unwanted inductance between the decoupling
capacitor and the power pin caused by the via.
length.
• Avoid sharp angles on the clock trace.Sharp angle
turns cause the characteristic impedance to change on
the transmission lines.
• Keep the clock traces on the same layer.Whenever pos-
sible, avoid placing vias on the clock traces. Placement
of vias on the traces can affect the trace characteristic
impedance and hence degrade signal integrity.
Maximize the power and ground pad sizes and number of vias
capacitors.This can reduce the inductance between the power
and ground planes and the component power and ground pins.
• To prevent cross talk, avoid routing other signal traces in
parallel with the clock traces. If running parallel traces is
unavoidable, allow a separation of at least three trace
widths between the differential clock trace and the other
signal trace.
The RC filter consisting of R7, C11, and C16 should be placed
as close to the VDDA pin as possible.
CLOCK TRACES AND TERMINATION
Poor signal integrity can degrade the system performance or
cause system failure. In synchronous high-speed digital systems,
the clock signal is less tolerant to poor signal integrity than other
signals. Any ringing on the rising or falling edge or excessive ring
back can cause system failure. The shape of the trace and the
• Make sure no other signal traces are routed between the
clock trace pair.
• The matching termination resistors should be located as
close to the receiver input pins as possible.
GND
R7
C16
C11
C7
VDDO
C6
C5
VDD
U1
Pin 1
VDDA
VIA
50 Ohm
Traces
C4
C1
C2
FIGURE 3B. PCB BOARD LAYOUT FOR ICS8624I
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
9
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
POWER CONSIDERATIONS
This section provides information on power dissipation and junction temperature for the ICS8624I.
Equations and example calculations are also provided.
1. Power Dissipation.
The total power dissipation for the ICS8624I is the sum of the core power plus the power dissipated in the load(s).
The following is the power dissipation for VDD = 3.3V + 5% = 3.465V, which gives worst case results.
NOTE: Please refer to Section 3 for details on calculating power dissipated in the load.
•
•
Power (core)MAX = VDD_MAX * IDD_MAX = 3.465V * 135mA = 467.8mW
Power (outputs)MAX = 32.8mW/Loaded Output pair
If all outputs are loaded, the total power is 5 * 32.8mW = 164mW
Total Power_MAX (3.465V, with all outputs switching) = 467.8mW + 164mW = 631.8mW
2. Junction Temperature.
Junction temperature, Tj, is the temperature at the junction of the bond wire and bond pad and directly affects the reliability of the
device.The maximum recommended junction temperature for HiPerClockSTM devices is 125°C.
The equation for Tj is as follows: Tj = θJA * Pd_total + TA
Tj = JunctionTemperature
θJA = Junction-to-AmbientThermal Resistance
Pd_total = Total Device Power Dissipation (example calculation is in section 1 above)
TA = AmbientTemperature
In order to calculate junction temperature, the appropriate junction-to-ambient thermal resistance θJA must be used. Assuming a
moderate air flow of 200 linear feet per minute and a multi-layer board, the appropriate value is 42.1°C/W perTable 7 below.
Therefore, Tj for an ambient temperature of 85°C with all outputs switching is:
85°C + 0.632W * 42.1°C/W = 111.6°C. This is below the limit of 125°C.
This calculation is only an example.Tj will obviously vary depending on the number of loaded outputs, supply voltage, air flow,
and the type of board (single layer or multi-layer).
TABLE 7. THERMAL RESISTANCE θJA FOR 32-PIN LQFP, FORCED CONVECTION
θJA byVelocity (Linear Feet per Minute)
0
200
55.9°C/W
42.1°C/W
500
50.1°C/W
39.4°C/W
Single-Layer PCB, JEDEC Standard Test Boards
Multi-Layer PCB, JEDEC Standard Test Boards
67.8°C/W
47.9°C/W
NOTE: Most modern PCB designs use multi-layered boards.The data in the second row pertains to most designs.
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
10
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
3. Calculations and Equations.
The purpose of this section is to derive the power dissipated into the load.
HSTL output driver circuit and termination are shown in Figure 4.
VDDO
Q1
VOUT
RL
50Ω
FIGURE 4. HSTL DRIVER CIRCUIT AND TERMINATION
To calculate worst case power dissipation into the load, use the following equations which assume a 50Ω load.
Pd_H is power dissipation when the output drives high.
Pd_L is the power dissipation when the output drives low.
Pd_H = (V
Pd_L = (V
/R ) * (V
- V
)
OH_MIN
L
DDO_MAX
OH_MIN
/R ) * (V
- V
)
OL_MAX
L
DDO_MAX
OL_MAX
Pd_H = (1V/50Ω) * (2V - 1V) = 20mW
Pd_L = (0.4V/50Ω) * (2V - 0.4V) = 12.8mW
Total Power Dissipation per output pair = Pd_H + Pd_L = 32.8mW
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
11
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
RELIABILITY INFORMATION
TABLE 8. θJAVS. AIR FLOW TABLE FOR 32 LEAD LQFP
θJA byVelocity (Linear Feet per Minute)
0
200
500
Single-Layer PCB, JEDEC Standard Test Boards
Multi-Layer PCB, JEDEC Standard Test Boards
67.8°C/W
47.9°C/W
55.9°C/W
50.1°C/W
42.1°C/W
39.4°C/W
NOTE: Most modern PCB designs use multi-layered boards.The data in the second row pertains to most designs.
TRANSISTOR COUNT
The transistor count for ICS8624I is: 1565
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
12
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
PACKAGE OUTLINE - Y SUFFIX FOR 32 LEAD LQFP
TABLE 9. PACKAGE DIMENISIONS
JEDEC VARIATION
ALL DIMENSIONS IN MILLIMETERS
BBA
SYMBOL
MINIMUM
NOMINAL
MAXIMUM
N
A
32
1.60
0.15
1.45
0.45
0.20
A1
A2
b
0.05
1.35
0.30
0.09
1.40
0.37
c
D
9.00 BASIC
7.00 BASIC
5.60
D1
D2
E
9.00 BASIC
7.00 BASIC
5.60
E1
E2
e
0.80 BASIC
0.60
L
0.45
0.75
θ
0°
7°
ccc
0.10
Reference Document: JEDEC Publication 95, MS-026
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
13
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
TABLE 10. ORDERING INFORMATION
Part/Order Number
ICS8624BYI
Marking
Package
Shipping Packaging
tray
Temperature
-40°C to 85°C
-40°C to 85°C
-40°C to 85°C
-40°C to 85°C
ICS8624BYI
ICS8624BYI
32 Lead LQFP
ICS8624BYIT
32 Lead LQFP
1000 tape & reel
tray
ICS8624BYILF
ICS8624BYILFT
ICS8624BYILF
ICS8624BYILF
32 Lead "Lead-Free" LQFP
32 Lead "Lead-Free" LQFP
1000 tape & reel
NOTE: Parts that are ordered with an "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
The aforementioned trademark, HiPerClockS is a trademark of Integrated Circuit Systems, Inc. or its subsidiaries in the United States and/or other countries.
While the information presented herein has been checked for both accuracy and reliability, Integrated Circuit Systems, Incorporated (ICS) assumes no responsibility for either its use or
for infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal
commercial and industrial applications. Any other applications such as those requiring high reliability or other extraordinary environmental requirements are not recommended without
additional processing by ICS. ICS reserves the right to change any circuitry or specifications without notice. ICS does not authorize or warrant any ICS product for use in life support devices
or critical medical instruments.
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
14
ICS8624I
LOW SKEW, 1-TO-5
DIFFERENTIAL-TO-HSTL ZERO DELAY BUFFER
Integrated
Circuit
Systems, Inc.
REVISION HISTORY SHEET
Description of Change
Rev
Table
Page
11 - 12 Revised Figures 3A & 3B.
Date
A
8/13/02
T1
2
Pin Description Table - revised VDD description to Core supply pins from
Positive supply pins.
T3A
T4A
3
Control Input Function Table - corrected note to read ...250MHz to 630MHz
from ...250 to 700MHz.
A
10/8/02
4
Power Supply Table - revised VDD Parameter description to read
Core Supply Voltage from Positive Supply Voltage.
13
Corrected power dissipation equation. Replaced VOH_MIN with VOH_MAX.
T2
3
4
5
Pin Characteristics Table - changed CIN 4pF max. to 4pF typical.
Absolute Maximum Ratings - updated Output rating.
HSTL DC Characteristics Table - changed VOX to 40ꢀ min. - 60ꢀ max. and
added note.
T4D
T6B
B
B
2/19/04
5
Added Table 6B AC Characteristics Table with VDD = VDDA = 3.3V 10ꢀ.
Changed LVHSTL to HSTL throughout the data sheet.
Added lead-free bullet.
1
8
Added Recommendations for Unused Input and Output Pins.
11/15/05
10-11 Corrected Power Considerations, Power Dissipation calculation.
T10
14
Ordering Information Table - added lead-free part number and note.
8624BYI
www.icst.com/products/hiperclocks.html
REV.B NOVEMBER 15, 2005
15
相关型号:
ICS8624BYIT
PLL Based Clock Driver, 5 True Output(s), 0 Inverted Output(s), PQFP32, 7 X 7 MM, 1.40 MM HEIGHT, LQFP-32
IDT
ICS8633AF-01
PLL Based Clock Driver, 8633 Series, 3 True Output(s), 0 Inverted Output(s), PDSO28, 5.30 X 10.20 MM, 1.75 MM HEIGHT, MO-150, SSOP-28
IDT
ICS8633AF-01LF
PLL Based Clock Driver, 8633 Series, 3 True Output(s), 0 Inverted Output(s), PDSO28, 5.30 X 10.20 MM, 1.75 MM HEIGHT, ROHS COMPLIANT, MO-150, SSOP-28
IDT
ICS8633AF-01LFT
PLL Based Clock Driver, 8633 Series, 3 True Output(s), 0 Inverted Output(s), PDSO28, 5.30 X 10.20 MM, 1.75 MM HEIGHT, ROHS COMPLIANT, MO-150, SSOP-28
IDT
ICS8634BK-01
PLL Based Clock Driver, 8634 Series, 5 True Output(s), 0 Inverted Output(s), 5 X 5 MM, 0.95 MM HEIGHT, MO-220, VFQFN-32
IDT
ICS8634BK-01LF
PLL Based Clock Driver, 8634 Series, 5 True Output(s), 0 Inverted Output(s), 5 X 5 MM, 0.95 MM HEIGHT, MO-220, VFQFN-32
IDT
ICS8634BK-01LFT
PLL Based Clock Driver, 8634 Series, 5 True Output(s), 0 Inverted Output(s), 5 X 5 MM, 0.95 MM HEIGHT, MO-220, VFQFN-32
IDT
ICS8634BK-01T
PLL Based Clock Driver, 8634 Series, 5 True Output(s), 0 Inverted Output(s), 5 X 5 MM, 0.95 MM HEIGHT, MO-220, VFQFN-32
IDT
©2020 ICPDF网 联系我们和版权申明