IDT60LVCR2245ASO [IDT]
3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O; 具有三态输出和5V兼容的I / O 3.3V CMOS八路总线收发器型号: | IDT60LVCR2245ASO |
厂家: | INTEGRATED DEVICE TECHNOLOGY |
描述: | 3.3V CMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS AND 5 VOLT TOLERANT I/O |
文件: | 总6页 (文件大小:65K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
3.3V CMOS
OCTAL BUS TRANSCEIVER
IDT74LVCR2245A
WITH 3-STATE OUTPUTS
AND 5 VOLT TOLERANT I/O
FEATURES:
DESCRIPTION:
• 0.5 MICRON CMOS Technology
TheLVCR2245Aoctalbustransceiverisbuiltusingadvanceddualmetal
CMOS technology. This device is designed for asynchronous communi-
cationbetweendatabuses. ThedevicetransmitsdatafromtheAbustothe
B bus or from the B bus to the A bus, depending on the logic level at the
direction-control (DIR) input. The output-enable (OE) input can be used to
disable the device so the buses are effectively isolated.
• ESD > 2000V per MIL-STD-883, Method 3015; > 200V using
machine model (C = 200pF, R = 0)
• VCC = 3.3V ± 0.3V, Normal Range
• VCC = 2.7V to 3.6V, Extended Range
• CMOS power levels (0.4µ W typ. static)
• Rail-to-rail output swing for increased noise margin
• All inputs, outputs, and I/O are 5V tolerant
• Available in SOIC, SSOP, QSOP, and TSSOP packages
The LVCR2245A has series resistors in the output structure which will
significantly reduce line noise when used with light loads. The driver has
been designed to drive ±12mA at the designated threshold.
Inputs can be driven from either 3.3V or 5V devices. This feature allows
the use of this device as a translator in a mixed 3.3V/5V environment.
DRIVE FEATURES:
• Balanced Output Drivers: ±12mA (B Port)
• Low switching noise
APPLICATIONS:
• 5V and 3.3V mixed voltage systems
• Data communication and telecommunication systems
FUNCTIONALBLOCKDIAGRAM
1
DIR
19
OE
2
A1
18
B1
TO SEVEN OTHER CHANNELS
TheIDTlogoisaregisteredtrademarkofIntegratedDeviceTechnology,Inc.
INDUSTRIAL TEMPERATURE RANGE
OCTOBER 1999
1
© 1999 Integrated Device Technology, Inc.
DSC-4610/1
IDT74LVCR2245A
3.3VCMOSOCTALBUSTRANSCEIVERWITH3-STATEOUTPUTS
INDUSTRIALTEMPERATURERANGE
ABSOLUTEMAXIMUMRATINGS(1)
PINCONFIGURATION
Symbol
VTERM
TSTG
Description
Terminal Voltage with Respect to GND
Storage Temperature
Max
Unit
V
–0.5 to +6.5
–65 to +150
–50 to +50
–50
°C
mA
mA
20
19
18
17
16
15
14
13
12
11
1
VCC
OE
B1
B2
DIR
A1
A2
A3
A4
A5
IOUT
DC Output Current
IIK
IOK
Continuous Clamp Current,
VI < 0 or VO < 0
2
3
4
ICC
ISS
Continuous Current through each
VCC or GND
±100
mA
NOTE:
1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause
permanent damage to the device. This is a stress rating only and functional operation
of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect reliability.
B3
B4
B5
B6
B7
B8
5
6
A6
A7
7
8
CAPACITANCE (TA = +25°C, F = 1.0MHz)
A8
Parameter(1)
Conditions
VIN = 0V
VOUT = 0V
VIN = 0V
Typ.
Max. Unit
9
Symbol
CIN
Input Capacitance
Output Capacitance
I/O Port Capacitance
4.5
6
8
8
pF
pF
pF
10
GND
COUT
CI/O
5.5
6.5
NOTE:
SOIC/ SSOP/ QSOP/ TSSOP
TOP VIEW
1. As applicable to the device type.
PINDESCRIPTION
Pin Names
Description
OE
Ax, Bx
DIR
Output Enable Input (Active LOW)
Data Inputs or 3-State Outputs
Direction Control Output
FUNCTIONTABLE(1)
Inputs
OE
L
DIR
L
Outputs
B Data to A Bus
L
H
A Data to B Bus
Isolation
H
X
NOTE:
1. H = HIGH Voltage Level
X = Don’t Care
L = LOW Voltage Level
2
IDT74LVCR2245A
INDUSTRIALTEMPERATURERANGE
3.3VCMOSOCTALBUSTRANSCEIVERWITH3-STATEOUTPUTS
DCELECTRICALCHARACTERISTICSOVEROPERATINGRANGE
FollowingConditionsApplyUnlessOtherwiseSpecified:
Operating Condition: TA = –40°C to +85°C
Symbol
Parameter
Test Conditions
Min.
1.7
2
Typ.(1)
—
Max.
—
Unit
VIH
Input HIGH Voltage Level
VCC = 2.3V to 2.7V
VCC = 2.7V to 3.6V
V
—
—
VIL
Input LOW Voltage Level
Input Leakage Current
VCC = 2.3V to 2.7V
VCC = 2.7V to 3.6V
—
—
—
—
0.7
0.8
V
IIH
IIL
VCC = 3.6V
VI = 0 to 5.5V
—
—
±5
µA
µA
IOZH
IOZL
High Impedance Output Current
(3-State Output pins)
VCC = 3.6V
VO = 0 to 5.5V
—
—
±10
IOFF
VIK
VH
Input/Output Power Off Leakage
Clamp Diode Voltage
VCC = 0V, VIN or VO ≤ 5.5V
—
—
—
±50
µA
V
VCC = 2.3V, IIN = –18mA
–0.7
–1.2
Input Hysteresis
VCC = 3.3V
VCC = 3.6V
—
—
100
—
—
10
mV
µA
ICCL
ICCH
ICCZ
Quiescent Power Supply Current
VIN = GND or VCC
3.6 ≤ VIN ≤ 5.5V(2)
—
—
—
—
10
500
∆ICC
Quiescent Power Supply Current
Variation
One input at VCC - 0.6V, other inputs at VCC or GND
µA
NOTES:
1. Typical values are at VCC = 3.3V, +25°C ambient.
2. This applies in the disabled state only.
OUTPUTDRIVECHARACTERISTICS
Symbol
Parameter
TestConditions(1)
VCC = 2.3V to 3.6V
Min.
Max.
—
Unit
V
VOH
Output HIGH Voltage
IOH = – 0.1mA
IOH = – 4mA
IOH = – 6mA
IOH = – 4mA
IOH = – 8mA
IOH = – 6mA
IOH = – 12mA
IOL = 0.1mA
IOL = 4mA
VCC – 0.2
VCC = 2.3V
VCC = 2.7V
VCC = 3V
1.9
1.7
2.2
2
—
—
—
—
2.4
2
—
—
VOL
OutputLOWVoltage
VCC = 2.3V to 3.6V
VCC = 2.3V
—
—
—
—
—
—
—
0.2
0.4
0.55
0.4
0.6
0.55
0.8
V
IOL = 6mA
VCC = 2.7V
VCC = 3V
IOL = 4mA
IOL = 8mA
IOL = 6mA
IOL = 12mA
NOTE:
1. VIH and VIL must be within the min. or max. range shown in the DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE table for the appropriate VCC range.
TA = – 40°C to + 85°C.
3
IDT74LVCR2245A
3.3VCMOSOCTALBUSTRANSCEIVERWITH3-STATEOUTPUTS
INDUSTRIALTEMPERATURERANGE
OPERATING CHARACTERISTICS, VCC = 3.3V ± 0.3V, TA = 25°C
Symbol
Parameter
Test Conditions
Typical
Unit
CPD
PowerDissipationCapacitanceperTransceiverOutputsenabled
PowerDissipationCapacitanceperTransceiverOutputsdisabled
CL = 0pF, f = 10Mhz
48
4
pF
CPD
SWITCHINGCHARACTERISTICS(1)
VCC = 2.7V
Max.
VCC = 3.3V ± 0.3V
Symbol
Parameter
Min.
Min.
Max.
Unit
tPLH
tPHL
PropagationDelay
Ax to Bx or Bx to Ax
OutputEnableTime
OE or DIR to Ax or Bx
OutputDisableTime
OE or DIR to Ax or Bx
OutputSkew(2)
—
7.3
9.5
8.5
—
1.5
6.3
ns
tPZH
tPZL
—
—
—
1.5
1.7
—
8.2
7.8
1
ns
ns
ns
tPHZ
tPLZ
tSK(o)
NOTES:
1. See TEST CIRCUITS AND WAVEFORMS. TA = – 40°C to + 85°C.
2. Skew between any two outputs of the same package and switching in the same direction.
4
IDT74LVCR2245A
INDUSTRIALTEMPERATURERANGE
3.3VCMOSOCTALBUSTRANSCEIVERWITH3-STATEOUTPUTS
TESTCIRCUITSANDWAVEFORMS
TESTCONDITIONS
VIH
VT
0V
SAME PHASE
INPUT TRANSITION
Symbol VCC(1)=3.3V±0.3V VCC(1)=2.7V VCC(2)=2.5V±0.2V
Unit
V
tPHL
tPLH
VOH
VT
VOL
OUTPUT
VLOAD
VIH
6
6
2 x Vcc
Vcc
2.7
1.5
300
300
50
2.7
1.5
300
300
50
V
tPLH
tPHL
VT
Vcc / 2
150
V
VIH
VT
0V
OPPOSITE PHASE
INPUT TRANSITION
VLZ
VHZ
CL
mV
mV
pF
150
LVC Link
30
Propagation Delay
VLOAD
Open
GND
VCC
DISABLE
ENABLE
VIH
VT
0V
CONTROL
INPUT
500Ω
tPZL
tPLZ
VIN
VOUT
(1, 2)
Pulse
D.U.T.
VLOAD/2
VLOAD/2
Generator
OUTPUT
NORMALLY
LOW
SWITCH
VLOAD
VT
VOL+VLZ
VOL
500Ω
RT
tPHZ
tPZH
CL
VOH
VOH-VHZ
OUTPUT
NORMALLY
HIGH
SWITCH
GND
VT
LVC Link
0V
0V
Test Circuit for All Outputs
LVC Link
DEFINITIONS:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the Pulse Generator.
Enable and Disable Times
NOTE:
1. Diagram shown for input Control Enable-LOW and input Control Disable-HIGH.
NOTES:
1. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2.5ns; tR ≤ 2.5ns.
2. Pulse Generator for All Pulses: Rate ≤ 10MHz; tF ≤ 2ns; tR ≤ 2ns.
VIH
DATA
INPUT
SWITCHPOSITION
VT
0V
Test
Switch
VLOAD
GND
tSU
tH
VIH
VT
0V
VIH
VT
0V
VIH
VT
0V
TIMING
INPUT
Open Drain
Disable Low
Enable Low
tREM
ASYNCHRONOUS
CONTROL
Disable High
Enable High
SYNCHRONOUS
CONTROL
All Other Tests
Open
tSU
tH
VIH
LVC Link
VT
0V
Set-up, Hold, and Release Times
INPUT
tPLH1
tPHL1
VOH
VT
VOL
LOW-HIGH-LOW
OUTPUT 1
VT
PULSE
tSK (x)
tSK (x)
VOH
tW
VT
VOL
HIGH-LOW-HIGH
PULSE
OUTPUT 2
VT
LVC Link
tPLH2
tPHL2
Pulse Width
tSK(x) = tPLH2 - tPLH1 or tPHL2 - tPHL1
LVC Link
Output Skew - tSK(X)
NOTES:
1. For tSK(o) OUTPUT1 and OUTPUT2 are any two outputs.
2. For tSK(b) OUTPUT1 and OUTPUT2 are in the same bank.
5
IDT74LVCR2245A
3.3VCMOSOCTALBUSTRANSCEIVERWITH3-STATEOUTPUTS
INDUSTRIALTEMPERATURERANGE
ORDERINGINFORMATION
IDT
XX
LVC
X
XXXX
XX
Temp. Range
Bus-Hold Device Type Package
SO
PY
Q
Small Outline IC (gull wing)
Shrink Small Outline Package
Quarter Size Small Outline Package
Thin Shrink Small Outline Package
PG
R2245A
Octal Bus Transceiver with 3-State Outputs, ±12mA
Blank
74
No Bus-hold
–40°C to +85°C
CORPORATE HEADQUARTERS
for SALES:
for Tech Support:
2975StenderWay
Santa Clara, CA 95054
800-345-7015 or 408-727-6116
fax: 408-492-8674
www.idt.com
logichelp@idt.com
(408) 654-6459
6
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明