5962-9162503HZX [INFINEON]
DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid, FM-10;型号: | 5962-9162503HZX |
厂家: | Infineon |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 20W, Hybrid, FM-10 局域网 |
文件: | 总11页 (文件大小:176K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AHE2800S Series
Hybrid - High Reliability
DC/DC Converters
DESCRIPTION
FEATURES
The AHE2800S Series of DC/DC converters feature
high power density and an extended temperature
range for use in military and industrial applications.
Designed to MIL-STD-704 input requirements,
these devices have nominal 28VDC inputs with +5v,
+12v and +15v single outputs to satisfy a wide range
of requirements. The circuit design incorporates a
pulse width modulated push-pull topology operating
in the feed-forward mode at a nominal switching
frequency of 250 KHz. Input to output isolation is
achieved through the use of transformers in the
forward and feedback circuits.
■ 17-40VDC input range
(28VDC nominal)
■ 5V, 12V and 15V outputs available
■ Indefinite short circuit and overload
protection
■ 17W/in3 power density
■ 15 and 20 watts output power models
■ Fast loop response for superior transient character-
istics
■ Operating temperature range from
-55°C to + 125°C available
The advanced feedback design provides fast loop
response for superior line and load transient charac-
teristics and offers greater reliability and radiation
tolerance than devices incorporating optical feed-
back circuits.
■ Popular industry standard pin-out
■ Resistance seam welded case for superior long
term hermeticity
■ Efficiencies up to 84%
■ Shutdown from external signal
■ Military screening
Three standard temperature grades are offered with
screening options. Refer to Part Number section.
They can be provided in a standard plug-in package
for PC mounting or in a flanged package for more
severe environments.
■ 325,000 hour MTBF at 85°C (AUC)
These converters are manufactured in a facility
fully qualified to MIL-PRF-38534. All processes used
to manufacture these converters have been
qualified to enable Lambda Advanced Analog to
deliver compliant devices. Two screening grades are
available to satisfy a wide range of requirements.
The CH grade converters are fully compliant to
MIL-PRF-38534 class H. The HB grade converters
are processed to full class H screening but do not
have class H element evaluation as required by
MIL-PRF-38534. Both grades are fully tested and
operate over the full military temperature range
without derating of output power. Variations in
electrical, mechanical and screening can be
accommodated. Extensive computer simulation
using complex modeling enables rapid design
modification to be provided. Contact Lambda
Advanced Analog with specific requirements.
SPECIFICATIONS
T
CASE = -55°C to +85°C, VIN = + 28V ±5% unless otherwise specified.
ABSOLUTE MAXIMUM RATINGS
Input Voltage1
Power Output
Soldering
-0.5V to +50V
Internally Limited, 17.5W typical for AHE2805S, 22.5W typical for AHE2812S and AHE2815S
300°C for 10 seconds
Operating
Storage
Temperature Range1
-55°C to +125°C case
-65°C to + 135°C
Conditions
-55°C - Tc - +85°C, VIN - 28 VDC
AHE2805S
Typ
AHE2812S
Typ
AHE2815S
Typ
Parameter
±5%, C=0, unless otherwise specified
Min
Max
Min
Max
Min
Max
Units
STATICCHARACTERISTICS
OUTPUT
Voltage
Current
Ripple
V
IN = 17 TO 40 VDC
I
OUT = 0 TO Full Load
4.90
0.0
5.00
5.10 11.76 12.00
3000 0.0
60
12.24 14.70
1667 0.0
60
15.00 15.30
1333
V
DC
mADC
mVpp
Full Load, DC to 1MHz
CASE = 25°C, IOUT = 0
20
5.00
30
30
60
Accuracy
T
4.95
15
5.05 11.88 12.00
12.12 14.85
15.00 15.15 VDC
Power1
20
20
W
REGULATION
Line
Load
V
IN = 17 to 40VDC
±0.5
±0.5
±1.0
±1.0
±0.5
±0.5
±1.0
±1.0
±0.5
±0.5
±1.0
±1.0
%
%
I
OUT = 0 to Full Load
INPUT
Voltage Range4
Current
17.0
80
28.0
8
40.0
18
35
17.0
79
28.0
8
40.0
18
35
17.0
80
28.0
8
40.0
18
35
V
DC
Inhibited
No Load
Full Load
mADC
mADC
mV p-p
Ripple Current
EFFICIENCY
20
82
50
25
83
50
25
84
50
T
CASE = +25°C
Half Load to Full Load
%
CAPACITIVE LOAD
No effect on performance
500
200
200
µF
LOAD FAULT POWER
DISSIPATION4
6
6
6
W
ISOLATION
Input to Output @ 500VDC
100
100
100
MΩ
DYNAMICCHARACTERISTICS
STEP LOAD CHANGES
Output
Transient
50% Load 100% Load
±150
±200
±200
mVpk
mVpk
mVpk
µsec
µsec
msec
No Load 50% Load
50% Load No Load
50% Load 100% Load
No Load 50% Load
50% Load No Load
-300
+300
25
500
7
-400
+400
25
500
7
-400
+400
25
500
7
Recovery2
STEP LINE CHANGES
Output
Input step 17 to 40VDC
Input step 40 to 17VDC
Input step 17 to 40VDC
Input step 40 to 17VDC
+180
-600
400
+180
-600
400
+180
-600
400
mVpk
mVpk
µsec
µsec
Transient
Recovery2
400
400
400
TURN-ON
Overshoot
Delay3
V
IN = 17 to 40VDC
I
OUT = 0 to Full Load
0
8
500
14
300
8
600
14
300
8
500
14
mVpk
msec
LOAD FAULT RECOVERY4
V
IN = 17 to 40VDC
8
14
8
14
8
14
msec
WEIGHT
Standard Package
Flange Package
55
58
55
58
55
58
grams
grams
Notes:
1. Above +85°C case temperature, derate output power linearly to 0 and maximum input voltage linearly to 42V at 115°C case.
2. Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1% of VOUT at 50% load. See typical waveforms.
3. Turn-on delay time measurement is for either an application of power at the input or a signal at the shutdown pin.
4. For operation at 16VDC, derate output power by 33%.
2
SPECIFICATIONS
T
CASE = -55°C to +105°C, VIN = + 28V ±5% unless otherwise specified.
ABSOLUTE MAXIMUM RATINGS
Input Voltage5
Power Output
Soldering
-0.5V to +50V
Internally Limited, 17.5W typical for AHE2805S/ES, 22.5W typical for AHE2812S/ES and AHE2815S/ES
300°C for 10 seconds
Operating
Storage
Temperature Range1
-55°C to +125°C case
-65°C to + 135°C
Conditions
-55°C - Tc - +105°C, VIN - 28 VDC
AHE2805S/ES
Typ
AHE2812/ES
Typ
AHE2815S/ES
Typ
Parameter
±5%, C=0, unless otherwise specified
Min
Max
Min
Max
Min
Max
Units
STATICCHARACTERISTICS
OUTPUT
Voltage
Current
Ripple
V
IN = 17 TO 40 VDC
I
OUT = 0 TO Full Load
4.90
0.0
5.00
5.10 11.76 12.00
3000 0.0
60
12.24 14.70
1667 0.0
60
12.12 14.85
20
15.00 15.30
1333
V
DC
mADC
mVpp
Full Load, DC to 1MHz
CASE = 25°C, IOUT = 0
20
5.00
30
30
60
Accuracy
T
4.95
15
5.05 11.88 12.00
20
15.00 15.15 VDC
Power1
W
REGULATION
Line
Load
V
IN = 17 to 40VDC
±0.5
±0.5
±1.0
±1.0
±0.5
±0.5
±1.0
±1.0
±0.5
±0.5
±1.0
±1.0
%
%
I
OUT = 0 to Full Load
INPUT
Voltage Range4
Current
17.0
78
28.0
8
40.0
18
35
17.0
79
28.0
8
40.0
18
35
17.0
80
28.0
8
40.0
18
35
V
DC
Inhibited
No Load
Full Load
mADC
mADC
mV p-p
Ripple Current
EFFICIENCY
20
82
50
25
83
50
25
84
50
T
CASE = +25°C
Half Load to Full Load
%
CAPACITIVE LOAD
No effect on performance
500
200
200
µF
LOAD FAULT POWER
DISSIPATION4
6
6
6
W
ISOLATION
Input to Output @ 500VDC
100
100
100
MΩ
DYNAMICCHARACTERISTICS
STEP LOAD CHANGES
Output
Transient
50% Load 100% Load
±150
±200
±200
mVpk
mVpk
mVpk
µsec
µsec
msec
No Load 50% Load
50% Load No Load
50% Load 100% Load
No Load 50% Load
50% Load No Load
-300
+300
25
500
7
-400
+400
25
500
7
-400
+400
25
500
7
Recovery2
STEP LINE CHANGES
Output
Input step 17 to 40VDC
Input step 40 to 17VDC
Input step 17 to 40VDC
Input step 40 to 17VDC
+180
-600
400
+180
-600
400
+180
-600
400
mVpk
mVpk
µsec
µsec
Transient
Recovery2
400
400
400
TURN-ON
Overshoot
Delay3
V
IN = 17 to 40VDC
I
OUT = 0 to Full Load
0
8
500
14
300
8
600
14
300
8
750
14
mVpk
msec
LOAD FAULT RECOVERY4
VIN = 17 to 40VDC
8
14
8
14
8
14
msec
WEIGHT
Standard Package
Flange Package
60
65
60
65
60
65
grams
grams
Notes:
1. Above +105°C case temperature, derate output power linearly to 0 at 125°C case.
2. Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1% of VOUT at 50% load. See typical waveforms.
3. Turn-on delay time measurement is for either an application of power at the input or a signal at the shutdown pin.
4. For operation at 16VDC, derate output power by 33%.
5. Above +85°C case temperature, derate maximum input voltage linearly to 33V at +125°C case.
3
SPECIFICATIONS
T
CASE = -55°C to +125°C, VIN = + 28V ±5% unless otherwise specified.
ABSOLUTE MAXIMUM RATINGS
Input Voltage1
Power Output
Soldering
-0.5V to +50V
Internally Limited, 17.5W typical for AHE2805S/HB&CH, 22.5W typical for AHE2812S/HB&CH and AHE2815S/HB&CH
300°C for 10 seconds
Operating
Temperature Range1
-55°C to + 125°C case
Storage
-65°C to + 135°C
Conditions
-55°C - Tc - +125°C, VIN - 28 VDC
AHE2805S/HB&CH
Min Typ Max
AHE2812S/HB&CH
Min Typ Max
AHE2815S/HB&CH
Min Typ Max
Parameter
±5%, C=0, unless otherwise specified
Units
STATICCHARACTERISTICS
OUTPUT
Voltage
Current
Ripple
V
IN = 17 TO 40 VDC
I
OUT = 0 TO Full Load
4.90
0.0
5.00
5.10 11.76 12.00
3000 0.0
60
12.24 14.70
1667 0.0
60
12.12 14.85
20
15.00 15.30
1333
V
DC
mADC
mV p-p
Full Load, DC to 1MHz
CASE = 25°C, IOUT = 0
20
5.00
30
30
60
Accuracy
T
4.95
15
5.05 11.88 12.00
20
15.00 15.15 VDC
Power1
W
REGULATION
Line
V
T
I
IN = 17 to 40VDC
CASE = 25°C
OUT = 0 to Full Load
1025
10
30
17.0
80
60
40
75
50
mv
35
150
5
50
30
120
Load
50
mv
INPUT
Voltage Range4
Current
17.0
80
28.0
8
40.0
18
35
28.0
8
40.0
17.0
80
28.0
8
40.0
V
DC
Inhibited
No Load
Full Load
18
35
50
18
35
50
mADC
mADC
mV p-p
Ripple Current
EFFICIENCY
20
82
50
25
83
25
84
T
CASE = +25°C Full Load
No effect on performance
Short Circuit T = 25°C
Overload T = 25°C
Input to Output @ 500VDC
%
CAPACITIVE LOAD
500
1000
200
1000
200
1000
µF
LOAD FAULT POWER
DISSIPATION
C
4.5
6
4.5
6
4.5
6
W
W
C
ISOLATION
100
100
100
MΩ
DYNAMICCHARACTERISTICS
STEP LOAD CHANGES
Output
T
C
= 25°C
50% Load 100% Load
No Load 50% Load
50% Load No Load
50% Load 100% Load
No Load 50% Load
50% Load No Load
±150
-300
+300
25
±300
±200
-400
+400
25
±300
-500
+500
70
±200
-400
+400
25
±300
-500
+500
70
mVpk
mVpk
mVpk
µsec
µsec
msec
Transient
-500
+500
70
200
5
Recovery2
100
500
1500
500
1500
5
5
STEP LINE CHANGES
Output = 25°C
T
C
Input Step 17 to 40VDC
Input Step 40 to 17VDC
Input Step 17 to 40VDC
Input Step 40 to 17VDC
+180
-600
400
+300
-1000
800
+180
-600
400
+500
-1500
800
+180
-600 -1500
400
400
+500
mVpk
mVpk
µsec
µsec
Transient
Recovery2
800
800
400
800
400
800
TURN-ON
Overshoot
Delay3
V
IN = 17 to 40VDC
I
OUT = 0 to Full Load
0
8
550
10
300
8
600
10
300
8
500
10
mVpk
msec
LOAD FAULT RECOVERY4
V
IN = 17 to 40VDC
8
10
8
10
8
10
msec
WEIGHT
Standard Package
Flange Package
55
58
55
58
55
58
grams
grams
Notes:
1. Above +125°C case temperature, derate output power linearly to 0 at 135°C case.
2. Recovery time is measured from the initiation of the transient to where VOUT has returned to within ±1% of VOUT at 50% load. See typical waveforms.
3. Turn-on delay time measurement is for either an application of power at the input or a signal at the shutdown pin.
4. For operation at 16VDC, derate output power by 33%.
4
BLOCK DIAGRAM
INPUT
FILTER
1
OUTPUT
FILTER
5
CONTROLLER
2
9
ERROR
AMP
& REF
3
4
10
APPLICATION INFORMATION
InhibitFunction
DeviceSynchronization
Whenever multiple DC/DC converters are utilized in
a single system, significant low frequency noise
may be generated due to slight difference in the
switching frequencies of the converters (beat fre-
quencynoise). Becauseofthelowfrequencynature
of this noise (typically less than 10KHz), it is difficult
to filter out and may interfere with proper operation
of sensitive systems (communications, radar or
telemetry). Lambda Advanced Analog offers an option
whichprovidessynchronizationofmultipleAHE/ATW/
ATO type converters, thus eliminating this type of noise.
Connecting the inhibit input (Pin 2) to input common
(Pin 10) will cause the converter to shut down. It is
recommended that the inhibit pin be driven by an
open collector device capable of sinking at least
400µA of current. The open circuit voltage of the
inhibit input is 11.5 ±1VDC.
EMI Filter
An optional EMI filter (AFC461) will reduce the input
ripple current to levels below the limits imposed by
MIL-STD-461 CEO3.
To take advantage of this capability, the system
designer must assign one of the converters as the
master. Then, by definition, the remaining convert-
ers become slaves and will operate at the masters’
switching frequency. The user should be aware that
the synchronization system is fail-safe; that is, the
slaves will continue operating should the master
frequency be interrupted for any reason. The layout
must be such that the synchronization output (pin 9)
of the master device is connected to the synchroni-
zation input (pin 9) of each slave device. It is
advisable to keep this run short to minimize the
possibility of radiating the 250KHz switching fre-
quency.
Output Adjust (AHE2805) only
The output voltage of the AHE2805 can be adjusted
upward by connecting Output Adjust (Pin 3) and
Output Common (Pin 4) as shown in Table 1.
Resistance
Pin 3 to 4
Output Voltage
Increase %
×
0
390k
145k
63k
22k
0
+ 1%
+ 2%
+ 3%
+ 4%
+ 5%
The appropriate parts must be ordered to utilize this
feature. After selecting the converters required for
the system, an ‘MSTR’ suffix is added for the master
converter part number and an ‘SLV’ suffix is added
for slave part number. See Part Number section.
Table 1 Output adjustment resistor values
5
STANDARDIZED MILITARY DRAWING
CROSS REFERENCE
1
5
4
+5 V
FILTER
AFC461
AHE2805S/ES-MSTR
MASTER
Standardized
militarydrawing
PIN
Vendor
CAGE
number
Vendor
similar
PIN
10
COMM
2
5962-8968301HXX
5962-8968301HZX
5962-8968302HXX
5962-8968302HZX
5962-8968303HXX
5962-8968303HZX
52467
52467
52467
52467
52467
52467
AHE2805S/CH
3
4
5
1
+15 V
AHE2815D/ES-SLV
SLAVE
AHE2805SF/CH
COMM
–15 V
10
AHE2805S/CH-SLV
AHE2805SF/CH-SLV
AHE2805S/CH-MSTR
AHE2805SF/CH-MSTR
SYSTEM
BUS
1
5
4
+12 V
AHE2812S/ES-SLV
SLAVE
10
COMM
2
9
Standardized
militarydrawing
PIN
Vendor
CAGE
number
Vendor
similar
PIN
Typical Synchronization Connection Diagram
5962-9158001HXX
5962-9158001HZX
5962-9158002HXX
5962-9158002HZX
5962-9158003HXX
5962-9158003HZX
52467
52467
52467
52467
52467
52467
AHE2812S/CH
AHE2812SF/CH
PIN DESIGNATION
AHE2812S/CH-SLV
AHE2812SF/CH-SLV
AHE2812S/CH-MSTR
AHE2812SF/CH-MSTR
Pin 1 Positive Input
Pin 2 Inhibit Input
Pin 3 Output adjust*
Pin 4 Output common
Pin 5 Positive output
Pin 10 Input common
Pin 9 N/C or sync
Pin 8 Case gnd
Pin 7 N/C
Pin 6 N/C
Standardized
militarydrawing
PIN
Vendor
CAGE
number
Vendor
similar
PIN
*AHE2805S only. AHE2812S/2815S have N/C on Pin 3
5962-9162501HXX
5962-9162501HZX
5962-9162502HXX
5962-9162502HZX
5962-9162503HXX
5962-9162503HZX
52467
52467
52467
52467
52467
52467
AHE2815S/CH
PART NUMBER
AHE2815SF/CH
AHE2815S/CH-SLV
AHE2815SF/CH-SLV
AHE2815S/CH-MSTR
AHE2815SF/CH-MSTR
AHE 28 xx S x / x - xxx
Model
Synchronization Option
MSTR—Master
SLV—Slave
Input Voltage
Output Voltage
05 – 5VDC
12 – 12VDC
15 – 15VDC
Temperature Range
Omit for -55°C to +85°C
ES – -55°C to +105°C
HB – -55°C to +125°C
Single Output
Package option
F – Flange
Omit Standard
6
AHE2812S EFFICIENCY
AHE2805S OUTPUT POWER DERATING vs AMBIENT TEMPERATURE
Ambient Temperature ( ½C )
Output Power ( Watts )
AHE2815S EFFICIENCY
AHE2805 TEMPERATURE RISE ABOVE AMBIENT vs OUTPUT POWER
Output Power (Watts)
Output Power (Watts)
AHE2812S EFFICIENCY
Output Power (Watts)
7
8
9
MECHANICAL OUTLINE
Input
Pos. Input
10
9
1
Common
.090R max
1.12max
(34.163)
0.800
(20.320)
N/C or sync
Inhibit Input
Case
Ground
Bottom
View
Output Adjust
Pin #1
Output Common
Pos. Output
0.040D 0.260L
(1.016) (6.604)
x
6
5
N/C
2.110
(53.594)
AHE2805S
0.495
12.573
4 x 0.400 1.600
=
(10.160) (40.640)
Standard
2.870 ± .010
(72.898 ±.254)
Input
Pos. Input
10
9
1
Common
.050R
1.110*
(28.194)
0.800*
(20.320)
N/C or sync
Inhibit Input
N/C
Case
Ground
Bottom
View
Pin #1
Output Common
Pos. Output
2.550* ± .010
(64.770)
6
5
N/C
0.162D* 2 places
(4.115)
2.120 max
AHE2812S/AHE2815S
0.050* typ
(1.270)
0.495*
(12.573)
4 x 0.400* 1.600*
=
0.040D* 0.260L
x
(10.160) (40.640)
(1.016) (6.604)
*±.005 (±0.127)
F option
HB & CH SCREENING PROCESS
Per MIL-STD-883
ES SCREENING PROCESS
Same as HB screening except as follows:
TestInspection
Method
TestInspection
Method
Conditlon
ConstantAcceleration
Burn-in
FinalElectrical
2001,500g's
1015, 96 hrs.
25°C only
Pre-SealInternalVisual
StabilizationBake
TemperatureCycling
ConstantAcceleration
Burn-in
Final Electrical Test
ExternalVisual
Gross Leak
2017
1008
1010
2001
1015
C
C
A, Y1 direction
TC = +125°C
TC = -55,+25,+125°C
2009
1014
1014
C
A
FineLeak
10
NOTES
The information in this data sheet has been carefully checked and is believed to be accurate; however no
responsibility is assumed for possible errors. These specifications are subject to change without notice.
Ó
9849
Lambda Advanced Analog
2270 Martin Avenue
Santa Clara CA 95050-2781
(408) 988-4930 FAX (408) 988-2702
MIL-PRF-38534 Certified
ISO9001 Registered
l
LAMBDA ADVANCED ANALOG INC.
相关型号:
©2020 ICPDF网 联系我们和版权申明