7703406YA [INFINEON]

Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, METAL, BFM-2;
7703406YA
型号: 7703406YA
厂家: Infineon    Infineon
描述:

Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, METAL, BFM-2

局域网 输出元件 调节器
文件: 总4页 (文件大小:104K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PD- 97266  
Three Terminal, Adjustable  
Negative Voltage Regulator  
OM1325NK  
1.5A  
Product Summary:  
Adjustable  
VOUT  
Standard Military  
Part Number  
VIN  
Package  
Drawing Number  
OM1325NK  
7703406Y  
-4.25V to -41.25V -1.2V to -37V TO-204  
TO-204  
These three terminal negative voltage regulators are  
supplied in hermetically sealed packages. All  
protective features are designed into the circuit,  
including thermal shutdown, current-limiting, and safe-  
area control. With heat sinking, these devices can  
deliver up to 1.5 amps of output current. The unit also  
features output voltages that can be fixed from -1.2  
volts to -37 volts using external resistors.  
Features:  
n Similar to Industry Standard LM137A  
n Approved to DSCC Standardized Military  
Drawing Number 7703406  
n Built-in Thermal Overload Protection  
n Short Circuit Current Limiting  
n Maximum Output Voltage Tolerence is  
Guaranteed ±1%  
n This part is also available in  
TO-257AA Package as OM1325ST(Isolated),  
TO-257AA Package as OM1325NT(Non-Isolated),  
SMD-1 Package as OM1325NM,  
SMD-3 Package as OM1325SM  
Absolute Maximum Ratings @ TC = 25°C  
Parameter  
Symbol  
Value  
Units  
VOUT  
VIN  
IOUT  
PD  
-1.2 to -37  
-4.25 to -41.25  
Recommended Output Voltage Range  
Recommended Input Voltage Range  
Output Current  
VDC  
1.5  
20  
A
W
Power Dissipation  
Input - Output Voltage Differential  
Thermal Resistance, Junction to Case  
Operating Temperature Range  
Storage Temperature Range  
VDIFF  
RTHJC  
TJ  
TS  
TL  
40  
3
V
°C/W  
-55 to +150  
-65 to +150  
300  
°C  
Lead Temperature (Soldering 10 seconds)  
www.irf.com  
1
10/27/06  
OM1325NK  
Electrical Characteristics: -55°C £ TA £ 125°C, IL = 8.0mA (Unless Otherwise Specified)  
Parameter  
Test Conditions  
VDIFF = 3.0V, TA = 25°C  
Symbol Min.  
Max. Units  
-1.262 -1.238  
VREF  
Reference Voltage  
V
V
DIFF = 3.0V  
DIFF = 40V  
-1.280 -1.220  
-1.280 -1.220  
V
3.0V VDIFF 40V, TA = 25°C  
3.0V VDIFF 40V  
-4.5  
-13.8  
-25  
4.5  
13.8  
25  
RLINE  
Line Regulation  
8.0mA IL 1.5A, VDIFF = 5.0V  
8.0mA IL 1.5A, VDIFF = 12V , TA = 25°C  
8.0mA IL 200mA, VDIFF = 40V, TA = 25°C  
8.0mA IL 100mA, VDIFF = 40V  
-25  
25  
RLOAD  
Load Regulation  
Thermal Regulation  
mV  
-25  
25  
-50  
50  
V
IN = -14.6V, IL = 1.5A  
VRTH  
-5.0  
66  
5.0  
-
PD = 20W, t = 10ms, TA = 25°C  
f = 120Hz, VOUT = VREF  
CADJ = 10µF  
RN  
Ripple Rejection  
dB  
Adjustment Pin Current  
V
DIFF = 3.0V  
DIFF = 40V  
-
-
100  
100  
IADJ  
V
µA  
IADJ (line)  
IADJ (load)  
3.0V VDIFF 40V  
-5.0  
-5.0  
-
5.0  
5.0  
3.0  
3.0  
5.0  
3.5  
Adjustment Pin Current Change  
Minimum Load Current  
Current Limit  
8.0mA IL 1.5A, VDIFF = 5.0V  
V
V
V
DIFF = 3.0V, VOUT = -1.4V(forced)  
DIFF = 10V, VOUT = -1.4V (forced)  
DIFF = 40V, VOUT = -1.4V (forced)  
ILmin  
mA  
A
-
-
VDIFF = 5.0V  
DIFF = 40V, TA = 25°C  
1.5  
0.24  
ICL  
V
1.2  
NOTES:  
 Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.  
Changes in output voltage due to heating effects must be taken into account separately.  
‚ If not tested, shall be guaranteed to the specified limits.  
ƒ Denotes the specifications which apply over the full operating temperature range.  
2
www.irf.com  
OM1325NK  
Standard Application  
IPROG  
R2  
+
+
CIN*  
CO**  
1.0 F  
1.0 F  
R1  
120  
IADG  
OM1325NK  
-VIN  
+VIN  
-VOUT  
+VOUT  
* Cin is required if regulator is located more than 4 inches from power supply filter. A 1.0µF solid  
tantalum or 10µF aluminum electrolytic is recommended.  
** Co is necessary for stability. A 1.0µF solid tantalum or 10µF aluminum electrolytic is recommended.  
VOUT = -1.25V (1+ R2/R1)  
www.irf.com  
3
OM1325NK  
Case Outline and Dimensions -TO-204  
NOTES:  
PIN ASSIGNMENTS  
Pin 1 - Adjust  
Pin 2 - Output  
Case -Input  
Part Numbering Nomenclature  
OM 1325  
N
K
M
Screening  
M = MIL-PRF-38535  
Package Code  
K = TO-204  
Device Number  
Isolated / Non-Isolated  
N = Non-Isolated  
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105  
IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776  
Data and specifications subject to change without notice. 10/2006  
4
www.irf.com  

相关型号:

7703406ZA

Negative Adjustable Voltage Regulator
ETC

77034072A

Positive Adjustable Voltage Regulator
ETC

77034074A

Adjustable Positive Standard Regulator, 1.5V Min, 5.5V Max, BIPolar,
INFINEON

7703407MA

Positive Adjustable Voltage Regulator
ETC

7703407NA

Regulator, 1 Output, BIPolar,
INFINEON

7703407TA

Positive Adjustable Voltage Regulator
ETC

7703407UA

Positive Adjustable Voltage Regulator
ETC

7703407UX

Adjustable Positive Standard Regulator, 1.2V Min, 57V Max, PSFM3,
WEDC

7703407XA

Positive Adjustable Voltage Regulator
ETC

7703407YA

Regulator, 1 Output, BIPolar,
INFINEON

7703407ZA

Positive Adjustable Voltage Regulator
ETC

7703407ZX

1.2 V-57V ADJUSTABLE POSITIVE REGULATOR, MBFM2
ACTEL