AUIPS2031RTR [INFINEON]
INTELLIGENT POWER LOW SIDE SWITCH;型号: | AUIPS2031RTR |
厂家: | Infineon |
描述: | INTELLIGENT POWER LOW SIDE SWITCH |
文件: | 总14页 (文件大小:246K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Automotive grade
AUIPS2031R
INTELLIGENT POWER LOW SIDE SWITCH
Features
Product Summary
•
•
•
•
•
•
•
Over temperature shutdown
Over current shutdown
Active clamp
Low current & logic level input
ESD protection
Optimized Turn On/Off for EMI
Diagnostic on the input current
Rds(on)
Vclamp
Ishutdown
60mΩ (max.)
68V
10A (min.)
Description
Packages
The AUIPS2031R is a three terminal Intelligent Power
Switch (IPS) that features a low side MOSFET with over-
current, over-temperature, ESD protection and drain to
source active clamp. This device offers protections and
the high reliability required in harsh environments. The
switch provides efficient protection by turning OFF the
power MOSFET when the temperature exceeds 165°C or
when the drain current reaches 15A. The device restarts
once the input is cycled. A serial resistance connected to
the input provides the diagnostic. The avalanche capability
is significantly enhanced by the active clamp and covers
most inductive load demagnetizations.
DPak
AUIPS2031R
Typical Connection
+Bat
Load
2
3
D
IN
Control
Input R
1
Input Signal
S
V Diag
1
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
†
Qualification Information
Automotive
(per AEC-Q100††)
Qualification Level
Comments: This family of ICs has passed an Automotive qualification. IR’s
Industrial and Consumer qualification level is granted by extension of the
higher Automotive level.
MSL1, 260°C
Moisture Sensitivity Level
DPAK-3L
(per IPC/JEDEC J-STD-
020)
Class M3 (+/-400V)
(per AEC-Q100-003)
Class H1C (+/-2000V)
Machine Model
ESD
Human Body Model
(
)
per AEC-Q100-002
Class C4 (+/-1000V)
(per AEC-Q100-011)
Class II, Level A
(per AEC-Q100-004)
Yes
Charged Device Model
IC Latch-Up Test
RoHS Compliant
†
††
Qualification standards can be found at International Rectifier’s web site http://www.irf.com/
Exceptions to AEC-Q100 requirements are noted in the qualification report.
††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International
Rectifier sales representative for further information.
2
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Absolute Maximum Ratings
Absolute maximum ratings indicate sustained limits beyond which damage to the device may occur. (Tj= -40°C..150°C,
Vcc=6..50V unless otherwise specified).
Symbol
Vds
Vin
Parameter
Maximum drain to source voltage
Maximum input voltage
Max diode continuous current (limited by thermal dissipation) Rth=50°C/W
Maximum power dissipation (internally limited by thermal protection)
Rth=50C°/W
Maximum operating junction temperature
Maximum storage temperature
Min. Max. Units
-0.3
-0.3
60
6
2.5
V
V
A
Isd cont.
Pd
W
-40
-55
2.5
150
150
Tj max.
°C
Thermal Characteristics
Symbol
Rth1
Parameter
Typ. Max. Units
Thermal resistance junction to ambient IPS2031R D-Pak std. footprint
Thermal resistance junction to ambient IPS2031R D-Pak 1” sqr. footprint
Thermal resistance junction to case IPS2031R D-Pak
70
50
2.5
Rth2
Rth3
°C/W
Recommended Operating Conditions
These values are given for a quick design. For operation outside these conditions, please consult the application notes.
Symbol
VIH
VIL
Ids
Rin
Parameter
High level input voltage
Low level input voltage
Continuous drain current, Tambient=85°C, Tj=125°C, Vin=5V,Rth=70°C/W
Min. Max. Units
4
0
0.5
0.5
5.5
0.5
2.3
1.5
1
A
Recommended resistor in series with IN pin
Input signal voltage=5V (1)
Input signal voltage=4V (1)
kΩ
Max. t rise
Max. input signal rising time (from 10% to 90%)(2)
0.5
µs
(1) Input signal of the pulse generator not the voltage on the IN pin of the device. Do not connect any other component on
the input.
(2) Max. t rise is for the input signal of the pulse generator not on the IN pin voltage of the device
3
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Static Electrical Characteristics
Tj=-40..150°C, Vcc=6..50V (unless otherwise specified)
Symbol
Rds(on)
Parameter
Min. Typ. Max. Units Test Conditions
ON state resistance Tj=25°C
ON state resistance Tj=150°C
Drain to source leakage current
45
80
0.1
60
110
1
Vin=5V, Ids=5A
mΩ
Idss1
Idss2
Vcc=14V, Vin=0V,
Tj=25°C
µA
Drain to source leakage current
0.15
2
Vcc=50V, Vin=0V,
Tj=25°C
75
7.5
2.8
80
V clamp1
V clamp2
Vin clamp
Vth
Iin, on
Iin, off
Drain to source clamp voltage 1
Drain to source clamp voltage 2
IN to source pin clamp voltage
Input threshold voltage
ON state IN positive current
OFF state IN positive current
( after protection latched )
63
5.5
1.1
10
68
68
6.2
2
40
250
Id=20mA See fig. 3 & 4
Id=1A
Iin=1mA
Id=200mA
Vin=5V
V
µA
120
350
Switching Electrical Characteristics
Vcc=28V, Resistive load=10Ω, Rinput=50Ω, Vin=5V, Tj=25°C
Symbol
Tdon
Tr
Tdoff
Tf
Parameter
Min. Typ. Max. Units Test Conditions
Turn-on delay time to 20%
Rise time 20% to 80%
Turn-off delay time to 80%
Fall time 80% to 20%
Turn on and off energy
0.5
0.2
3
2
1.4
8
5
3
12
3
µs
µJ
See figure 2
0.2
1.4
110
Eon + Eoff
Protection Characteristics
Tj=-40..150°C, Vcc=6..50V (unless otherwise specified)
Symbol
Tsd
Isd
Vreset
Treset
Parameter
Min. Typ. Max.
Units
°C
A
V
µs
Test Conditions
See figure 1
See figure 1
20
2
Over temperature threshold
Over current threshold
IN protection reset threshold
Time to reset protection
150(2) 165
10
0.9
15
15
1.6
50
500
Vin=0V, Tj=25°C
(2) Guaranteed by design
4
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Lead Assignments
Functional Block Diagram
All values are typical
DRAIN
66V
75V
75Ω
1kΩ
20kΩ
IN
S
R
Q
Q
6V
Tj > 165°C
I > Isd
SOURCE
5
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
All curves are typical values. Operating in the shaded area is not recommended.
Vin
Ids
t<T reset
t>T reset
Ishutdown
Vin
Ids
Isd
80%
20%
Tj
Tsd
165°C
Tshutdown
Td on
Td off
Tr
Tf
Vdiag
Vds
normal
fault
Figure 1 – Timing diagram
Figure 2 – IN rise time & switching definitions
T clamp
Vin
Ids
L
Rem : During active clamp,
Vload is negative
V load
R
+
14V
-
D
Vds clamp
IN
Vds
5V
S
Vin
Vds
Ids
0V
Vcc
See Application Notes to evaluate power dissipation
Figure 3 – Active clamp waveforms
Figure 4 – Active clamp test circuit
6
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
200%
150%
100%
50%
200%
150%
100%
50%
0%
-50
0
50
100
150
0
1
2
3
4
5
6
Vin, input voltage (V)
Tj, junction temperature (°C)
Figure 5 – Normalized Rdson (%) Vs Input voltage (V)
Figure 6 - Normalized Rds(on) (%) Vs Tj (°C)
20
15
10
200
180
160
140
120
100
80
60
5
40
I limit
20
I shutdown
0
0
0
1
2
3
4
5
6
0
1
2
3
4
5
6
Vin, input voltage (V)
Vin, input voltage (V)
Figure 7 – Current limitation and current shutdown
Vs Input voltage (V)
Figure 8 – Over temperature shutdown (°C)
Vs input voltage (V)
7
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
20
15
10
5
5
4
3
2
1
0
25°C
DPak 70°C/W
125°C
-40°C
0
0.01
-50
0
50
100
150
0.1
1
10
100
1000
Tamb, Ambient temperature (°C)
Protection response time (s)
Figure 9 – Max. continuous output current (A) Vs
Ambient temperature (°C)
Figure 10 – Ids (A) Vs over temperature protection
response time (s)
100
10
1
100
10
1
0.1
0.01
0.1
1e-5 1e-4 1e-3 1e-2 1e-1 1e+0 1e+1 1e+2 1e+3
0.01
0.1
1
10
Inductive load (mH)
Time (s)
Figure 11 – Max. ouput current (A)
Vs Inductive load (mH)
Figure 12 – Transient thermal impedance (°C/W)
Vs time (s)
This is for single pulse when Tj=165°C and for repetitive
pulses when Tj<115°C before turning off.
8
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
300
250
200
150
100
50
Iin on
Iin off
0
-50
0
50
100
150
Tj, junction temperature (°C)
Figure 13 – Input current (µA) On and Off
Vs junction temperature (°C)
9
www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Case outline – Dpak
10 www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Tape & Reel – Dpak
11 www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Part Marking Information
Ordering Information
Standard Pack
Form
Base Part Number
Package Type
Complete Part Number
Quantity
75
Tube
AUIPS2031R
AUIPS2031RTR
AUIPS2031RTRL
AUIPS2031RTRR
Tape and reel
2000
3000
3000
AUIPS2031R
D-Pak-5-Lead
Tape and reel left
Tape and reel right
12 www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR)
reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and
services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU”
prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and
process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order
acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with
IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to
support this warranty. Except where mandated by government requirements, testing of all parameters of each product is
not necessarily performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their
products and applications using IR components. To minimize the risks with customer products and applications,
customers should provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and
is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with
alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation.
Information of third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or
service voids all express and any implied warranties for the associated IR product or service and is an unfair and
deceptive business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into
the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the
IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products
for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers,
employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such
unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of
the product.
Only products certified as military grade by the Defense Logistics Agency (DLA) of the US Department of Defense, are
designed and manufactured to meet DLA military specifications required by certain military, aerospace or other
applications. Buyers acknowledge and agree that any use of IR products not certified by DLA as military-grade, in
applications requiring military grade products, is solely at the Buyer’s own risk and that they are solely responsible for
compliance with all legal and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR
products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the
designation “AU”. Buyers acknowledge and agree that
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
101 N. Sepulveda Blvd., El Segundo, California 90245
Tel: (310) 252-7105
13 www.irf.com
© 2013 International Rectifier
April 25, 2013
AUIPS2031R
Revision History
Revision
Date
Notes/Changes
Add tri-temp ds
Update before qual
Final release
Remove ESD section page3
Update qual page
Update storage temperature
Update switching losses
Add a note figure 11
A4
A5
A6
A7
A8
B
March, 25th, 2010
May, 10th 2010
November, 17th 2010
December, 7th 2010
December, 9th 2010
June, 21st 2012
December, 3rd 2012
C
D
April, 18th 2013
Update Recommended Input resistor
14 www.irf.com
© 2013 International Rectifier
April 25, 2013
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明