MURB1629-1TRL [INFINEON]

Ultrafast Rectifier; 超快整流器


型号：	MURB1629-1TRL
厂家：	Infineon
描述：	Ultrafast Rectifier 超快整流器
文件：	总9页 (文件大小：298K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Bulletin PD-21083 08/05

MURB1620CTPbF

MURB1620CT-1PbF

Ultrafast Rectifier

Features

t_rr= 25ns

I_F(AV)= 16Amp

V_R= 200V

•

Ultrafast Recovery Time

Low Forward Voltage Drop

Low Leakage Current

175°C Operating Junction Temperature

Lead-Free ("PbF" suffix)

Description/ Applications

International Rectifier's MUR.. series are the state of the art Ultra fast recovery rectifiers specifically designed with

optimized performance of forward voltage drop and ultra fast recovery time.

The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness

and reliability characteristics.

These devices are intended for use in the output rectification stage of SMPS, UPS, DC-DC converters as well as

free-wheeling diode in low voltage inverters and chopper motor drives.

Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over

dissipation in the switching element and snubbers.

Absolute Maximum Ratings

Parameters

Max

Units

V_RRM

I_F(AV)

Peak Repetitive Peak Reverse Voltage

Average Rectified Forward Current

Total Device, (Rated V_R), T_C= 150°C

Non Repetitive Peak Surge Current

Peak Repetitive Forward Current

200

8.0

100

Per Leg

Total Device

Per Leg

I_FSM

I_FM

Per Leg

(Rated V_R, Square wave, 20 KHz), T_C= 150°C

T_J, T_STGOperating Junction and Storage Temperatures

-65 to 175

°C

Case Styles

MURB1620CT-1PbF

MURB1620CTPbF

BASE

COMMON

CATHODE

ANODE COMMON ANODE

ANODE COMMON

CATHODE

ANODE

CATHODE

D²PAK

TO-262

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

Electrical Characteristics @ T = 25°C (unless otherwise specified)

Parameters

Min Typ Max Units Test Conditions

V_BR, V_r

V_F

Breakdown Voltage,

Blocking Voltage

200

I_R= 100µA

Forward Voltage

0.975

I_F= 8A

0.895

I_F= 8A, T_J= 150°C

V_R= V_RRated

I_R

Reverse Leakage Current

µA

250

T_J= 150°C, V_R= V_RRated

V_R= 200V

C_T

L_S

Junction Capacitance

Series Inductance

8.0

Measured lead to lead 5mm from package body

Dynamic Recovery Characteristics @ T = 25°C (unless otherwise specified)

Parameters

Min Typ Max Units Test Conditions

t_rr

Reverse Recovery Time

I_F= 1.0A, di_F/dt = 50A/µs, V_R= 30V

I_F= 0.5A, I_R= 1.0A, I_REC= 0.25A

1.7

4.2

T_J= 25°C

T_J= 125°C

T_J= 25°C

T_J= 125°C

T_J= 25°C

T_J= 125°C

I_F= 8A

V_R= 160V

di_F/dt = 200A/µs

I_RRM

Peak Recovery Current

Q_rr

Reverse Recovery Charge

Thermal - Mechanical Characteristics

Parameters

Min

Typ

Max

Units

T_J

Max. Junction Temperature Range

Max. Storage Temperature Range

Thermal Resistance, Junction to Case

- 65

175

°C

T_Stg

- 65

175

3.0

R_thJC

R_thJA

R_thCS

Per Leg

°C/W

Thermal Resistance, Junction to Ambient Per Leg

Thermal Resistance, Case to Heatsink

Weight

0.5

2.0

0.07

(oz)

Mounting Torque

Marking Device

6.0

5.0

Kg-cm

lbf.in

MURB1620CT

Case style D²Pak

MURB1620CT-1

Case style TO-262

Mounting Surface, Flat, Smooth and Greased

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

100

= 175˚C

150˚C

125˚C

100˚C

25˚C

0.1

0.01

0.001

= 175˚C

= 150˚C

100

150

200

250

Reverse Voltage-V_R(V)

Fig.2-Typical Values Of Reverse Current

Vs. Reverse Voltage

= 25˚C

1000

100

= 25˚C

0.1

0.2 0.4 0.6 0.8

1.2 1.4 1.6 1.8

100

1000

Forward Voltage Drop-V_FM(V)

Reverse Voltage-V_R(V)

Fig.3-Typical Junction Capacitance

Vs. Reverse Voltage

Fig.1-Typical Forward Voltage Drop Characteristics

D = 0.50

D = 0.20

D = 0.10

D = 0.05

D = 0.02

D = 0.01

0.1

Notes:

Single Pulse

(Thermal Resistance)

1. Duty factor D = t1/t 2

2. Peak Tj = Pdm x ZthJC + Tc

0.01

0.00001

0.0001

t1,Rectangular Pulse Duration (Seconds)

Fig.4-Max. Thermal Impedance Z_thJCCharacteristics

0.001

0.01

0.1

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

180

170

D = 0.01

D = 0.02

D = 0.05

D = 0.10

D = 0.20

D = 0.50

160

150

Square wave (D = 0.50)

Rated Vr applied

RMS Limit

140

see note (2)

130

Average Forward Current - IF_(AV)(A)

Average Forward Current-IF_(AV)(A)

Fig.5-Max. Allowable CaseTemperature

Vs. Average Forward Current

Fig.6-Forward Power Loss Characteristics

200

= 30 A

= 15 A

= 8 A

V_R= 160V

T_J= 125˚C

T_J

= 25˚C

160

120

= 30 A

= 15 A

= 8 A

V_R= 160V

T_J= 125˚C

T_J

= 25˚C

100

1000

100

1000

di_F/dt (A/µs)

di _F/dt (A/µs)

Fig.7-TypicalReverseRecovery vs.di _F/dt

Fig.8-TypicalStoredCharge vs.di_F/dt

(2) Formulaused:T_C=T_J-(Pd+Pd_REV)xR_thJC

;

Pd=ForwardPowerLoss=I_F(AV)xV_FM@(I_F(AV)/D) (seeFig.6);

Pd_REV=InversePowerLoss=V_R1xI_R(1-D); I_R@V_R1=ratedV_R

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

Reverse Recovery Circuit

= 200V

0.01

Ω

L = 70µH

D.U.T.

di /dt

dif/_Fdt

ADJUST

IRFP250

Fig. 9- Reverse Recovery Parameter Test Circuit

0.5

di(rec)M/dt

RRM

0.75

RRM

di /dt

di _F/dt

1. di /dt - Rate of change of current through zero

4. Q_rr- Area under curve defined by t

crossing

and I

RRM

x I

RRM

2. I

- Peak reverse recovery current

RRM

3. t - Reverse recovery time measured from zero

5. di

/ dt - Peak rate of change of

(rec) M

current during t portion of t

crossing point of negative going I to point where

RRM

a line passing through 0.75 I

extrapolated to zero current

and 0.50 I

RRM

Fig. 10 - Reverse Recovery Waveform and Definitions

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

Outlines Table

BASE

COMMON

CATHODE

ANODE COMMON

CATHODE

ANODE

Conform to JEDEC outline D²Pak (SMD-220)

Dimensions in millimeters and (inches)

Modified JEDEC outline TO-262

Dimensions in millimeters and (inches)

BASE

COMMON

CATHODE

ANODE COMMON

CATHODE

ANODE

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

Part Marking Information

D²PAK

PART NUMBER

INTERNATIONAL

RECTIFIER

LOGO

THIS IS A MURB1620CT

LOT CODE 8024

ASSEMBLED ON WW 02, 2000

MURB1620CT

DATE CODE

YEAR 0 = 2000

WEEK 02

ASSEMBLY

LOT CODE

P = LEAD-FREE

TO-262

PART NUMBER

DATE CODE

INTERNATIONAL

RECTIFIER

LOGO

THIS IS A MURB1620CT-1

LOT CODE 8024

ASSEMBLED ON WW 02, 2000

MURB1620CT-1

YEAR 0 = 2000

WEEK 02

ASSEMBLY

LOT CODE

P = LEAD-FREE

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

Tape & Reel Information

TRR

1.60 (0.063)

1.50 (0.059)

4.10 (0.161)

3.90 (0.153)

1.60 (0.063)

1.50 (0.059)

DIA.

0.368 (0.0145)

0.342 (0.0135)

FEED DIRECTION

TRL

1.85 (0.073)

1.65 (0.065)

11.60 (0.457)

11.40 (0.449)

24.30 (0.957)

23.90 (0.941)

15.42 (0.609)

15.22 (0.601)

1.75 (0.069)

DIA.

10.90 (0.429)

10.70 (0.421)

1.25 (0.049)

16.10 (0.634)

15.90 (0.626)

4.72 (0.186)

4.52 (0.178)

FEED DIRECTION

13.50 (0.532)

12.80 (0.504)

26.40 (1.039)

24.40 (0.961)

DIA.

SMD-220 Tape & Reel

When ordering, indicate the part

number, part orientation, and the

quantity. Quantities are in multiples

of 800 pieces per reel for both

TRL and TRR.

60 (2.362)

DIA. MIN.

360 (14.173)

DIA. MAX.

Dimensionsinmillimetersand(inches)

www.irf.com

MURB1620CTPbF, MURB1620CT-1PbF

Bulletin PD-21083 08/05

Ordering Information Table

Device Code

MUR

16 20 CT

-1

TRL PbF

Ultrafast MUR Series

= D²Pak/ TO-262

Current Rating(16 = 16A)

Voltage Rating (20 = 200V)

CT = Center Tap (Dual) TO-220 /D²PAK/ TO-262

-1 = TO-262

y none = Tube (50 pieces)

y TRL = Tape & Reel (Left Oriented, for D²PAk package)

y TRR = Tape & Reel (Right Oriented, for D²PAk package)

y none = Standard Production

y PbF = Lead-Free

Data and specifications subject to change without notice.

This product has been designed and qualified for Industrial Level and Lead-Free.

Qualification Standards can be found on IR's Web site.

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7309

Visit us at www.irf.com for sales contact information. 08/05

www.irf.com

相关型号：