OM1325STMPBF [INFINEON]
Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, MSFM3, ISOLATED, HERMETIC SEALED, TO-257, 3 PIN;型号: | OM1325STMPBF |
厂家: | Infineon |
描述: | Adjustable Negative Standard Regulator, 1.2V Min, 37V Max, MSFM3, ISOLATED, HERMETIC SEALED, TO-257, 3 PIN 局域网 输出元件 调节器 |
文件: | 总4页 (文件大小:41K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
OM1325SMM OM1325NMM OM1325STM
OM1325N2M
OM1325NKM OM1325NTM
1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE
REGULATOR APPROVED TO DESC DRAWING 7703406
Three Terminal, Precision Adjustable
Negative Voltage Regulator In Hermetic
Style Packages (LM137A)
Please see mechanical
outlines herein
FEATURES
• Similar To Industry Standard LM137A
• Approved To DESC Standardized Military Drawing Number 7703406
• Built In Thermal Overload Protection
• Short Circuit Current Limiting
• Available In Six Package Styles
• Maximum Output Voltage Tolerance Is Guaranteed to + 1%
DESCRIPTION
These three terminal negative regulators are supplied in hermetically sealed
packages. All protective features are designed into the circuit, including thermal
shutdown, current-limiting, and safe-area control. With heat sinking, these devices
can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5
amps. The unit also features output voltages that can be fixed from -1.2 volts to -37
volts using external resistors.
ABSOLUTE MAXIMUM RATINGST @ 25°C
c
Power Dissipation
Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W
Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W
Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C
Thermal Resistance, Junction to Case:
3.3
Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W
Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W
Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W
Case Y, TO-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0°C/W
Maximum Output Current:
Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A
Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Recommended Operating Conditions:
Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-1.2 to -37 VDC
Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C
Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -4.25 to -41.25 VDC
4 11 R2
Supersedes 1 07 R1
3.3 - 21
OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM, OM1325N2M
ELECTRICAL CHARACTERISTICS -55°C TA 125°C, IL = 8mA (unless otherwise specified)
OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM
Parameter
Symbol
Test Conditions
VDIFF = 3.0V, TA = 25°C
VDIFF = 3.0V
Min.
-1.262
-1.280
-1.280
-4.5
Max.
-1.238
-1.220
-1.220
4.5
Unit
Reference Voltage
VREF
•
•
V
VDIFF = 40V
Line Regulation
(Note 1)
RLINE
3.0 V VDIFF 40V, TA = 25°C
3.0V VDIFF 40V
•
•
-13.8
-25
13.8
25
mV
mV
Load Regulation
(Note 1)
RLOAD
VDIFF = 5V, 8mA IL 1.5A
VDIFF = 12V, 8mA IL 1.5A, TA = 25°C
VDIFF 40V, 8mA IL 1.5A, TA = 25°C
VDIFF = 40V, 8mA IL 1.5A
Vin = -14.6V, IL = 1.5A
-25
25
-25
25
•
•
-50
50
Thermal Regulation
VRTH
-5
5
mV
dB
Pd = 20 Watts, t = 10 ms, TA = 25°C
f = 120 Hz, Vout = Vref
Ripple Rejection
(Note 2)
RN
66
CAdj = 10 µF
Adjustment Pin Current
IAdj
VDIFF = 3.0V
VDIFF = 40V
•
•
100
100
µA
µA
µA
mA
Adjustment Pin
Current Change
³IAdj
(line)
³IAdj
3V VDIFF 40V
•
-5
-5
5
(load)
ILmin
VDIFF = 5V, 8mA IL 1.5A
VDIFF = 3.0V, Vout = -1.4V (forced)
VDIFF = 10V, Vout = -1.4V (forced)
VDIFF = 40V, Vout = -1.4V (forced)
VDIFF 5V
•
•
•
•
•
5
Miminum Load Current
3.0
3.0
5.0
3.5
1.2
Current Limit
(Note 2)
ICL
1.5
VDIFF = 40V, TA = 25°C
0.24
A
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. If not tested, shall be guaranteed to the specified limits.
3. The • denotes the specifications which apply over the full operating temperature range.
3.3
PART NUMBER DESIGNATOR
Standard Military Drawing Number
Omnirel Part Number
Omnirel Package Designation
7703406M
7703406U
7703406T
7703406Y
7703406N
77034062
OM1325SMM
OM1325STM
OM1325NTM
OM1325NKM
OM1325NMM
OM1325N2M
SMD-3
TO-257 (Isolated)
TO-257 (non-Isolated)
TO-3
SMD-1
LCC-20
3.3 - 22
OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM, OM1325N2M
ELECTRICAL CHARACTERISTICS -55°C TA 125°C, IL = 8mA (unless otherwise specified)
OM1325N2M
Parameter
Symbol
Test Conditions
VDIFF = 3.0V, TA = 25°C
Min.
-1.262
-1.280
-1.280
-4.5
Max.
-1.238
-1.220
-1.220
4.5
Unit
Reference Voltage
VREF
VDIFF = 3.0V
•
•
V
VDIFF = 40V
Line Regulation
(Note 1)
RLINE
3.0 V VDIFF 40V, TA = 25°C
3.0V VDIFF 40V
•
•
-13.8
-25
13.8
25
mV
mV
Load Regulation
(Note 1)
RLOAD
VDIFF = 5V, 8mA IL 200 mA
VDIFF = 15V, 8mA IL 200m, ATA = 25°C
VDIFF 40V, 8mA IL 150 mA, ATA = 25°C
VDIFF = 40V, 8mA IL 50 mA
Vin = -16.25V, IL =330 mA
Pd =5 Watts, t = 10 ms, TA = 25°C
f = 120 Hz, Vout = Vref
-25
25
-25
25
•
•
-50
50
Thermal Regulation
VRTH
-5
5
mV
dB
Ripple Rejection
(Note 2)
RN
66
CAdj = 10 µF
Adjustment Pin Current
IAdj
VDIFF = 3.0V
VDIFF = 40V
•
•
100
100
µA
µA
µA
mA
Adjustment Pin
Current Change
³IAdj
(line)
³IAdj
3V VDIFF 40V
•
-5
-5
5
(load)
ILmin
VDIFF = 5V, 8mA IL 500 mA
VDIFF = 3.0V, Vout = -1.4V (forced)
VDIFF = 10V, Vout = -1.4V (forced)
VDIFF = 40V, Vout = -1.4V (forced)
VDIFF 5V
•
•
•
•
•
5
Miminum Load Current
3.0
3.0
5.0
1.8
0.65
Current Limit
(Note 2)
ICL
0.5
VDIFF = 40V, TA = 25°C
0.15
A
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. If not tested, shall be guaranteed to the specified limits.
3. The • denotes the specifications which apply over the full operating temperature range.
3.3
TYPICAL APPLICATION
* Cin is required if regulator is located more
than 4 inches from power supply filter. A 1 µF
IPROG
solid tantalum or 10 µF aluminum electrolytic is
recommended.
+
+
R2
CIN*
1.0µF
CO**
R1
1.0µF
120
** Co is necessary for stability. A 1 µF solid
tantalum or 10 µF aluminum electrolytic is
recommended.
IAdj
VIN
VOUT
-VIN
-VOUT
Vout = -1.25 V (1 +R2)
OM1325STM
R1
3.3 - 23
OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM, OM1325N2M
MECHANICAL OUTLINE
.200
.190
.425
.420
.410
.045
.035
1
2
.100
3
.200
.425
.665
.645
.035 WIDE
FLAT 3 PLCS.
.150
.140
.537
.527
.430
.410
1 2 3
.350 MIN.
± .020
.115
.038 MAX.
.005
.160
.750
.500
.020
.080
OM1325SMM
Front View
Pin 1 - Adjust
Pin 2 - Output
Pin 3 - Input
Case - Isolated
.120 TYP.
.100 TYP.
.035
.025
OM1325STM
Isolated
Front View
OM1325NTM
Non-Isolated
Front View
.140
.140
.140
.015
.075
.157
.075
.030
Pin 1 - Adjust
Pin 2 - Input
Pin 3 - Output
Tab - Isolated
Pin 1 - Adjust
Pin 2 - Input
Pin 3 - Output
Tab - Input
2
1
MIN.
.415
.062
3
.375
OM1325NMM
Pin 1 - Adjust
Pin 2 - Output
Pin 3 - Input
1.197
1.177
1.53
REF.
0.675
0.655
.009 R.
20 PLCS.
0.875
MAX.
0.440
0.420
.065
0.188 R.
MAX.
0.135
MAX.
.020 X45°
REF.
.040
4
.075 (±.010)
TYP.
0.450
0.250
(±.003)
.025
TYP.
2
1
.010
9
3
.160
SQ. REF.
1
0.312
MIN.
.085
13
19
0.525 R.
MAX.
0.225
0.205
0.043
0.038
0.161
0.151
.025 SQ.
TYP.
14
.050
TYP.
18
SEATING
PLANE
.003
3.3
2 PLCS.
.050 (±.005)
.040 X45°
REF (3 PL)
TYP.
OM1325N2M
OM1325NKM
Pin 1 VOUT
Pin 11 VIN
Pin 12 NC
Pin 1 - Adjust
Pin 2 VOUT(Sense)
Pin 2 - Output
Case - Input
Pin 3 NC
Pin 4 NC
Pin 5 NC
Pin 6 NC
Pin 7 NC
Pin 8 NC
Pin 9 NC
Pin 10 NC
Pin 13 NC
Pin 14 NC
Pin 15 NC
Pin 16 ADJUST
Pin 17 NC
Pin 18 NC
Pin 19 NC
Pin 20 NC
For additional information please see the mechanical outline section.
205 Crawford Street, Leominster, MA 01453 USA (508) 534-5776 FAX (508) 537-4246
相关型号:
OM1326NMM
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326NMM with Standard Packaging
INFINEON
OM1326SMM
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326SMM with Standard Packaging
INFINEON
OM1326STM
Hi-Rel Adjustable Voltage 3-Terminal Positive Regulator - A OM1326STM with Standard Packaging
INFINEON
©2020 ICPDF网 联系我们和版权申明