PMB2314 [INFINEON]

Prescaler Circuit 2.1 GHz; 预分频电路2.1 GHz的
PMB2314
型号: PMB2314
厂家: Infineon    Infineon
描述:

Prescaler Circuit 2.1 GHz
预分频电路2.1 GHz的

文件: 总14页 (文件大小:476K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Data Sheet, Version 1.2, December 2003  
Prescaler Circuit 2.1 GHz  
PMB 2314T  
Version 1.5  
Wireless Infrastructure  
N e v e r s t o p t h i n k i n g .  
Edition 2003-12-04  
Published by Infineon Technologies AG,  
St.-Martin-Strasse 53,  
81669 München, Germany  
© Infineon Technologies AG 2003.  
All Rights Reserved.  
Attention please!  
The information herein is given to describe certain components and shall not be considered as a guarantee of  
characteristics.  
Terms of delivery and rights to technical change reserved.  
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding  
circuits, descriptions and charts stated herein.  
Information  
For further information on technology, delivery terms and conditions and prices please contact your nearest  
Infineon Technologies Office (www.infineon.com).  
Warnings  
Due to technical requirements components may contain dangerous substances. For information on the types in  
question please contact your nearest Infineon Technologies Office.  
Infineon Technologies Components may only be used in life-support devices or systems with the express written  
approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure  
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support  
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain  
and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may  
be endangered.  
Prescaler Circuit 2.1 GHz  
Revision History:  
2003-12-04  
Version 1.2  
Previous Version:  
none  
Page  
All  
Subjects (major changes since last revision)  
Updated Format  
We Listen to Your Comments  
Any information within this document that you feel is wrong, unclear or missing at all?  
Your feedback will help us to continuously improve the quality of this document.  
Please send your proposal (including a reference to this document) to:  
mcdocu.comments@infineon.com  
PMB 2314T  
Version 1.5  
Table of Contents  
1
2
3
4
5
6
7
8
9
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
AC/DC Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Test Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Application Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
- Definition of Modulus Set-Up Time  
- Input Dynamic Range  
10  
Package Outlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Data Sheet  
<Doc_Subtype>  
4
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Overview  
1
Overview – Prescalar Circuit 2.1 GHz  
1.1  
Functional Description/ Application  
The IC is designed for use in mobile radio communication devices up to 2100 MHz and upconversion systems up  
2500 MHz.  
Due to low power consumption and low phase noise generation, the PMB2314T is suitable for use in battery  
powered handheld systems, e.g. GSM, cordless telephones and cordless consumer products, as well as in  
basestations.  
Low supply voltage down to 2.7V. It can be switched to a low-power standby mode.  
Internal current source at the emitter follower output. No external resistor needed in typical applications.  
The divide ratio is 1:64/65 or 1:128/129 depending on the external circuit configuration.  
1.2  
Circuit Description  
The differential inputs of the IC may be connected either balanced or single ended. In the latter case the unused  
input must be RF-grounded with a capacitor (about 10 pF) with a low serial inductance.  
Depending on the logic level at SW input the basic divide ratio of the ECL-stages is fixed to 1:64/65 or 1:128/129.  
The MOD input determines whether modulus 1:n or 1:n+1 (n=64 or 128 according to SW-level) is active.  
The IC can be switched to a low-power standby mode (input STB).  
The MOD input is TTL/CMOS compatible.  
The emitter follower output is CMOS compatible according to the application circuit on page 12. The minimum logic  
swing is 0.8 Vpp.  
Table 1  
Function Table  
Input pin  
SW  
Logic level  
Prescaler function  
HIGH = US-0.1 V to US  
1:64/65  
LOW = GND to 0.8 V or open  
1:128/129  
MOD  
STB  
HIGH = 2.0 V to US or open  
LOW = GND to 0.8 V  
1:64/1:128  
1:65/1:129  
HIGH = US-0.1 V to US  
LOW = GND to 0.8 V  
Divider  
Q=HIGH, STANDBY-mode  
Data Sheet  
5
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Pin Assignment  
2
Pin Assignment  
I2  
I1  
1
2
3
8
7
US  
STB  
MOD  
SW  
Q
6
5
GND  
4
Pin 1 RF-input I1  
Pin 2 supply voltage US  
Pin 3 divide ratio 1:64/65 - 1:128/129 control input (SW)  
Pin 4 output Q  
Pin 5 GND  
Pin 6 modulus 1:n/n+1 (n=64 or 128) control input (MOD)  
Pin 7 standby mode control input (STB)  
Pin 8 RF-input I2  
Data Sheet  
6
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Block Diagram  
3
Block Diagram  
US  
2
7
STB  
Uref  
4
6
8
Q
I2  
1:64/65  
1:128/129  
1
I1  
I
3
MOD  
SW  
5
GND  
Data Sheet  
7
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Absolute Maximum Ratings  
4
Absolute Maximum Ratings  
TA = -40 to 85 °C  
Parameter  
Symbol  
US  
Limit Values  
min. max.  
Unit  
Remarks  
Supply voltage  
-0.3  
6
2
V
V
Input level  
(Pin 1; Pin 8)  
UI  
US=0V  
Voltage swing  
(Pin 1 to 8)  
UI18  
-2  
2
V
V
Input level  
(Pin 3; Pin 6; Pin 7)  
USW,  
UMOD,  
USTB,  
-0.3  
US+0.7V  
or 5.5V if  
US+0.7V >  
5.5V  
US=2.7...5.5V  
Output level  
(Pin 4)  
UQ  
-IQ  
US  
V
Output current  
(Pin 4)  
5
mA  
Junction temperature  
Storage temperature  
Tj  
TS  
Rthsa  
125  
125  
185  
°C  
-65  
°C  
Thermal resistance  
system-ambient  
K/W  
The maximum ratings may not be exceeded under any circumstances, not even momentarily and  
individually, as permanent damage to the IC will result.  
ESD-integrity ( according MIL-STD 883D, Meth. 3015.7): 500V  
5
Operating Range  
Parameter  
Symbol  
Limit Values  
Unit  
Remarks  
min.  
2.7  
max.  
5.5  
Supply Voltage  
US  
ƒ
V
Input frequency  
100  
-40  
2300  
85  
MHz  
°C  
Ambient temperature  
TA  
Within the operational range the IC operates as described in the circuit description. The AC / DC  
characteristic limits are not guaranteed.  
Data Sheet  
8
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
AC/DC Characteristics  
6
AC/DC Characteristics  
Supply voltage VS=2.7 to 5.5V  
Ambient temperature TA = -20 to 85 °C (refered to the test circuit)  
Parameter  
Symbol  
Limit Values  
typ.  
Unit  
Test Condition  
min.  
max.  
Supply Current  
Supply current  
normal operation  
IS  
2.7  
2.8  
2.9  
3.3  
mA  
mA  
mA  
mA  
inputs RF-grounded,  
US=2.7, TA = 25 °C,  
STB= VS output open  
inputs RF-grounded,  
US=4.0, TA = 25 °C,  
STB= VS output open  
inputs RF-grounded,  
VS=5.5, TA = 25 °C,  
STB= VS output open  
IS  
3.4  
IS  
3.5  
0.1  
Supply current  
standby-mode  
ISTB  
inputs RF-grounded,  
output open, STB = GND  
RF Input I1,I2  
Input level  
dynamic range  
Pin  
Pin  
-20  
4
dBm  
dBm  
100-1500MHz (sine wave)  
2100 MHz ( diagram 2 )  
-20  
-3  
Output Q  
Output logic swing  
UQ  
UQ  
I
1
1.1  
1.1  
400  
VPP  
VPP  
µA  
CL <= 12pF, RL=2kΩ  
CL <= 8pF  
0.8  
Internal current source  
see block diagram  
Divider Ratio Control Input SW  
age high  
VSWH  
VSWL  
ISWH  
-ISWL  
VS-0.1  
GND  
VS  
0.8  
60  
30  
V
Voltage low  
V
Input current high  
Input current low  
µA  
µA  
SW=VS  
SW=GND  
Modulus Control Input MOD  
Voltage high  
VMODH  
2.3  
VS  
V
Voltage low  
VMODL  
IMODH  
-IMODL  
GND  
0.8  
V
Input current high  
Input current low  
50  
µA  
µA  
MOD=VS  
MOD=GND  
120  
Standby Mode Control Input STB  
Voltage high  
VSTBH  
VSTBL  
ISTBH  
-ISTBL  
US-0.1  
GND  
VS  
0.8  
30  
60  
V
Voltage low  
V
Input current high  
Input current low  
Delay times  
µA  
µA  
STB=VS  
STB=GND  
MOD setup time  
(diagram 1)  
tset  
8
14  
ns  
AC /DC characteristics involve the spread of values guaranteed within the specified suply voltage and ambient temperature range. Typical cha-  
racteristics are the median of the production.  
Data Sheet  
9
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Test Circuit  
7
Test Circuit  
Input sensitivity and output logic swing measurement  
spectrum  
analyser  
UQ  
GND  
Frequency  
counter  
5
4
US  
US  
US  
1n  
USW  
6
3
PMB  
2314  
UMOD  
Scope  
Cload  
2
1
7
USTB  
RL  
Signal  
generator  
(50Ω)  
UI  
8
UI2  
1n  
1n  
50Ω  
C
load <= 8pF inc.  
jig and instrument  
input capacitance  
RL only needed for  
enhanced driving  
capability.  
Data Sheet  
10  
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Application Circuit  
8
Application Circuit  
MOD  
CMOS-PLL  
GND  
5
Q
F
4
ca. 1nF  
TBB 206  
MOD  
SW  
PMB 2304  
6
3
PMB  
PMB 2307  
PD  
STB  
2314  
7
US  
I1  
US  
2
1
I2  
8
1nF  
1n  
LF  
VCO  
(SW connected for 1:64/65 divider ratio)  
Data Sheet  
11  
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Diagrams  
9
Diagrams  
Diagram 1 - Definition of Modulus Set-Up Time  
I
MOD  
tset  
Q
Changes of the mod-level made up to  
this time will still affect the Q-output  
Diagram 2 - Input Dynamic Range  
PMB 2314 T V1.3 Dynamic Range 2.7V Ratio 65  
Operating Window  
20  
10  
0
-10  
-20  
-30  
-40  
-50  
0
500  
1000  
1500  
2000  
2500  
f / [ MHz ]  
Data Sheet  
12  
Version 1.2, 2003-12-04  
PMB 2314T  
Version 1.5  
Package Outlines  
10  
Package Outlines  
5,2 max  
4 -0,2  
5
0,7  
0,19+0,06  
6±0,2  
8
5
4
1
0,35+0,15  
0,7 max  
1,27  
3,81  
Plastic Package, P-DSO-8, Dual-in-Line-Package, 20 A 8 DIN 41870 T16 (SMD)  
Data Sheet  
13  
Version 1.2, 2003-12-04  
w w w . i n f i n e o n . c o m  
Published by Infineon Technologies AG  

相关型号:

PMB2314-T

Prescaler Circuit 2.1 GHz PMB 2314T
INFINEON

PMB2314T

Prescaler Circuit 2.1 GHz
INFINEON

PMB2330

2-GHz-Mixer
INFINEON

PMB2330T

2-GHz-Mixer
INFINEON

PMB2331

The mixer used in this design is a general purpose up-/downconversion gilbert cell mixer
INFINEON

PMB2331-T

Double Balanced Mixer, 2000MHz Max
INFINEON

PMB2332

RF Mixer
ETC

PMB2332-R

Narrow Band Low Power Amplifier, 1100MHz Max,
INFINEON

PMB2333

ICs for Communications
INFINEON

PMB2333-R

暂无描述
INFINEON

PMB2335

RF Mixer
ETC

PMB2341

10-pin Single PLL
INFINEON