PVO402APPBF [INFINEON]

Transistor Output SSR, 1-Channel, 3750V Isolation, PLASTIC, SURFACE MOUNT, THIN-PAK, DIP-8;


型号：	PVO402APPBF
厂家：	Infineon
描述：	Transistor Output SSR, 1-Channel, 3750V Isolation, PLASTIC, SURFACE MOUNT, THIN-PAK, DIP-8 输入元件输出元件光电
文件：	总6页 (文件大小：88K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Data Sheet No. PD10045_D

PVO402AP

Microelectronic Power IC

HEXFET^®Power MOSFET Relay

Single Pole, Normally Open + Ring Detector

0-400V, 150mA AC/DC

Features

General Description

The PVO402AP Photovoltaic Relay is a single pole,

normally open solid-state relay plus ring detector. By

integrating these two functions in one package it can

replace two discrete components, i.e., a relay and an

AC-input opto-coupler. The relay portion of PVO402AP

utilizes International Rectifier’ s HEXFET power

MOSFET as the output switch, driven by an integrated

circuit photovoltaic generator of novel construction. The

output switch is controlled by radiation from a GaAlAs

light emitting diode (LED) which is optically isolated from

the photovoltaic generator. The ring detector portion of

PVO402AP has two LEDs in inverse parallel connec-

tion as the input sensing element and a silicon NPN

photo-transistor as the output switch.

HEXFET Power MOSFET output

Bounce-free operation

3,750 V_RMSI/O Isolation

Linear AC/DC operation

Solid-State Reliability

BABT certified

PVO402AP is ideally suited for PCMCIA fax/modem

cards. Its extremely low profile allows it to be used in

Type II cards whose outer shells are only 5mm thick.

PVO402AP Relays are packaged in an 8-pin, molded

‘ Thin-Pak’ DIP package with ‘ gull-wing’ surface mount

terminals. It is available in plastic shipping tubes or on

tape-and-reel. Please refer to Part Identification (oppo-

site) for details.

PVO402AP ‘Thin-Pak’

Part Identification

Applications

PVO402AP

PVO402AP-T SMT, tape and reel

SMT, plastic shipping tube

! On/Off Hook switch

! Dial pulsing

! Ringer injection

! Ring detection

! Loop current detection

(HEXFET is the registered trademark for International Rectifier Power MOSFETs)

www.irf.com

PVO402AP

Electrical Specifications (-40°C ≤ T_A≤ +85°C unless otherwise specified)

RELAY

INPUT CHARACTERISTICS

Min. Control Current (See Fig.1)

Limits

5.0

Units

Max. Control Current for Off-State Resistance @T =+25°C

0.4

Control Current Range (Caution: current limit input LED, see Fig.6)

5.0 to 25

Max. Reverse Voltage

7.0

OUTPUT CHARACTERISTICS

Operating Voltage Range

Limits

0 to ±400

Units

V_{(DC or AC peak)}

Max. Load Current @ T_A=+40°C

5mA Control (See Fig.1)

150

Max. On-State Resistance @T_A=+25°C

For 50mA Pulsed Load, 5mA Control (See Fig.4)

Max. Off-State Leakage @T_A=+25°C, ±400V (See Fig.5)

Max. Turn-On Time @T_A=+25°C (See Fig. 7)

For 50mA, 100 V_DCLoad, 5mA Control

Max. Turn-Off Time @T_A=+25°C (See Fig. 7)

For 50mA, 100 V_DCLoad, 5mA Control

Max. Output Capacitance @ 50V_DC

1.0

Ω

µA

1.0

0.5

DETECTOR

INPUT CHARACTERISTICS

Limits

5.0

Units

Min. Control Current @ I_C= 2mA, V_CE= 0.5V

Max. Control Current for Off-State Leakage I_C=1µA, V_CE=5V @T_A=+25°C

µA

Control Current Range (Caution: current limit input LED, see Fig.6)

5.0 to 25

OUTPUT CHARACTERISTICS

Limits

0.5

500

150

Units

V_DC

Min. Collector-Emitter Breakdown Voltage @ I_C= 10µA

Min.Current Transfer Ratio @ I_LED= 6mA, V_CE= 5V (see Fig. 9)

Max. Saturation Voltage @ I_LED= 16mA, I_C= 2mA

Max. Leakage Current @ I_LED=0mA, V_CE= 5V

Max. Power Dissipation @T_A=+25°C (derate linearly 2.0mW/°C)

COMBINED

GENERAL CHARACTERISTICS

Limits

3750

1000

Units

V_RMS

V_DC

Min. Dielectric Strength, Input-Output

Min. Dielectric Strength, Relay-Detector

Min. Insulation Resistance, Input-Output

@T_A=+25°C, 50%RH, 100V_DC

10¹²

3.0

Ω

Max. Capacitance, Input-Output

Max. Pin Soldering Temperature (10 seconds max.)

Ambient Temperature Range: Operating

Storage

+260

-40 to +85

-40 to +100

°C

International Rectifier does not recommend the use of this product in aerospace, avionics, military or life support applications.

Users of this International Rectifier product in such applications assume all risks of such use and indemnify International

Rectifier against all damages resulting from such use.

www.irf.com

PVO402AP

Connection Diagram

200

Relay

I_LED= 5mA

Relay

150

100

Ambient Temperature (deg. C)

Vdd, Drain to Drain Voltage (V)

Figure 1. Current Derating Curve

Figure 2. Typical Output Capacitance

www.irf.com

PVO402AP

200

150

100

2.5

2.0

1.5

1.0

0.5

Relay

5 mA Control

= 10 mA

-5.0 -4.0 -3.0 -2.0 -1.0

1.0 2.0 3.0 4.0 5.0

-50

-100

-150

-200

5 mA Control

@25 C, pulsed

75 100 125

-50 -25

Relay’s Output Voltage Drop (Vdd)

Ambient Temperature (deg. C)

Figure 3. Linearity Characteristics

Figure 4. Typical Normalized On-Resistance

100

CAUTION:Providecurrent

Relay

limitingsothat25mAmax.

steady-statecontrolcurrent

ratingisnotexceeded.

Relay and

Detector

3.0

1.0

0.3

0.1

65 85

105

-35 -15

0.5

1.0

1.5

2.0

Ambient Temperature (deg. C)

LED Forward Voltage Drop (Volts DC)

Figure 5. Typical Normalized Off-State

Leakage

Figure 6. Input Characteristics

(Current Controlled)

www.irf.com

PVO402AP

Relay

LED

90%

10%

dly

off

50 100

Delay Time (microseconds)

dly

200

1000 2000

500

Figure 7. Typical Delay Times

Figure 8. Delay Time Definitions

10 mA

LED

Detector

5 mA

2 mA

1 mA

Collector-Emitter Voltage (V)

Figure 9.Typical Transfer Characteristics

www.irf.com

PVO402AP

Case Outline

01-2011 00

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105

Data and specifications subject to change without notice. 10/17/2003

www.irf.com

相关型号：