SLE66C162PM5 [INFINEON]
Security & Chip Card ICs; 安全和芯片卡IC型号: | SLE66C162PM5 |
厂家: | Infineon |
描述: | Security & Chip Card ICs |
文件: | 总7页 (文件大小:35K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Security & Chip Card ICs
SLE 66C162P
16-Bit Security Controller
with Memory Management and Protection Unit
in 0.25 µm CMOS Technology
72-Kbytes ROM, 2304 bytes RAM, 16-Kbytes EEPROM
Short Product Information 08.01
SLE 66C162P Short Product Information
Ref.: SPI_SLE66C162P_0801.doc
This document contains preliminary information on a new product under development.
Details are subject to change without notice.
Revision History: Current Version 08.01
Previous Releases:
Page
Subjects (changes since last revision)
Important: Further information is confidential and on request. Please contact:
Infineon Technologies AG in Munich, Germany,
Security & Chip Card ICs,
Tel +49 - (0)89 234-80000
Fax +49 - (0)89 234-81000
E-Mail: security.chipcard.ics@infineon.com
Edition 2001
Published by Infineon Technologies AG, CC Applications Group
St.-Martin-Strasse 53, D-81541 München
© Infineon Technologies AG 2001
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered as warranted characteristics.
Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits,
descriptions and charts stated herein.
Infineon Technologies is an approved CECC manufacturer.
Information
For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon
Technologies Office in Germany or our Infineon Technologies Representatives world-wide (see address list).
Warnings
Due to technical requirements components may contain dangerous substances. For information on the types in question please
contact your nearest Infineon Technologies Office.
Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of
Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support
device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended
to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
SLE 66C162P
16-Bit Security Controller with MMU in 0.25µm CMOS Technology
72-Kbytes ROM, 2304 bytes RAM, 16-Kbytes EEPROM
Features
Slim-EEPROM
· 16-bit microcomputer in 0.25 µm CMOS
· Reading, erasing and writing byte by byte
technology
· Flexible page mode for 1 to 64 bytes
· Instruction set opcode compatible with
write/erase operation
standard SAB 8051 processor
· 32 bytes security area (OTP)
· Erase + Write time < 4.5 ms
· Enhanced 16-bit arithmetic
· Additional powerful instructions optimized
· Minimum of 500.000 write/erase cycles at
for chip card applications
25°C
· Dedicated, non-standard architecture with
execution time 6 times faster (18 times
by PLLmax) than standard SAB 8051
processor at same external clock
· Data retention for a minimum of 10 years
· EEPROM programming voltage generated on
chip
· 70 Kbytes User ROM for application
Memory Management and Protection Unit
programs
· Addressable memory up to 1 Mbyte
· Additional 2 Kbytes reserved ROM for
Resource Management System (RMS+
light) with intelligent EEPROM write/erase
routines
· Separates OS (system) and application
(user)
· System routines called by traps
· OS can restrict access to peripherals in
· 16 Kbytes Slim-EEPROM
· 2 Kbytes XRAM, 256 Bytes IRAM
application mode
· Code execution from XRAM possible
· Memory Management and Protection
Unit (MMU)
Security Features
· CRC Module
Operation state monitoring mechanism
· Low and high voltage sensors
· Frequency sensors and filters
· Interrupt Module
· Two 16-bit Autoreload Timer
· PLL
· Power saving sleep mode
· External clock frequency 1 to 7.5 MHz
Memory Security
for internal clock £ 10 MHz
· 16 bytes security PROM, hardware
· UART for handling serial interface in
protected
accordance with ISO/IEC 7816 part 3
supporting transmission protocols T=1
and T=0
· Unique chip identification number for each
chip
· MED - memory encryption/decryption device
· I/O routines realized in software executable
· Supply voltage range: 2.7 V to 5.5 V
for XRAM, ROM and EEPROM
· True Random Number Generator with
· Current consumption
Firmware test function
< 10 mA @ 5.5 V
· Security optimised layout and layout
< 6 mA @ 3.3 V
scrambling
· Temperature range: -25 to +85°C
· ESD protection larger than 6 kV
Short Product Information
3 / 7
08.01
SLE 66C162P
Testmode
Document References
· Irreversible Lock - Out of testmode
· Confidential Data Book SLE 66CxxxP
· Qualification report
Anti Snooping
· Chip delivery specification for wafer with
chip-layout (die size, orientation,...)
· HW-countermeasures against SPA/DPA-,
Timing- and DFA-attacks (differential fault
analysis – DFA)
· Module specification containing description
of package, etc.
· Qualification report module
· CRC – Module
· Non standard dedicated Smart Card CPU
– Core
Development Tools Overview
· Short
Product
Development Kit SDK CC
Information
Software
Support
· Short Product Information Card Emulator
· HW-& SW-Tools (Emulator, ROM Monitor,
CE66P
Card Emulator, Simulator, Softmasking)
· Short Product Information ROM Monitor
· Application notes
RM66P
· Short Product Information Emulator ET66P
Supported Standards
Hitex or ET66P KSC
· Short Product Information Smart Mask
· ISO/IEC 7816
· EMV 2000
Package
· GSM 11.1x
· ETS I TS 102 221
Short Product Information
4 / 7
08.01
SLE 66C162P
Ordering Information
Type
Package1
Voltage
Range
Temperature
Range
Frequency Range
(ext. clock frequency)
SLE 66C162P M5
M5
die
M5
die
M5
Die
2.7 V - 5.5 V – 25°C to + 70°C 1 MHz - 5 MHz
2.7 V - 5.5 V – 25°C to + 85°C 1 MHz - 5 MHz
2.7 V - 5.5 V – 25°C to + 70°C 1 MHz – 7.5 MHz
SLE 66C162P C
SLE 66C162P-T85 M5
SLE 66C162P-T85 C
SLE 66C162P-F7 M5
SLE 66C162P-F7 C
Production sites:
· Dresden SLE 66CxxxP
· UMC Taiwan SLE 66CxxxPU
1 available as wire-bonded module (M5) for embedding in plastic cards or as die (C) for customer packaging
Short Product Information
5 / 7
08.01
SLE 66C162P
Pin Configuration
VCC GND
CLK
RST
I/O
SLE
66C162P
Figure 1: Pin Configuration
Pin Definitions and Functions
Symbol
VCC
RST
Function
Operating voltage
Reset input
CLK
Processor clock input
Ground
GND
I/O
Bi-directional data port
Short Product Information
6 / 7
08.01
SLE 66C162P
General Description
SLE 66C162P is another member of Infineon Technologies high-end security controller family in
advanced 0.25 µm CMOS technology. The CPU provides the high efficiency of the SAB 8051-
instruction set extended by additional powerful instructions together with enhanced performance,
memory sizes and security features. The internal clock frequency can be adjusted up to 15 MHz
independent of the clock rate of the terminal with the help of the PLL.
The controller IC offers 70 Kbytes of User-ROM, 256 bytes internal RAM, 2048 bytes XRAM and
16 Kbytes Slim-EEPROM. The Memory Management and Protection Unit allows a secure
separation of the operating system and the applications. Furthermore the MMU makes a secure
downloading of applications possible after the personalization of a card. These new features suit
the requirements of the next generation of multi application operating systems. For code
compatibility to the SLE 66CxxS family, a transparent mode for the MMU is established which
allows to keep the memory mapping of the SLE 66CxxS products.
Voltage
Clock
Reset
ROM
72 Kbyte
XRAM
2 Kbyte
EEPROM
16 Kbyte
UART
16-Bit CPU with
MMU
&
Address-/Data Bus
two
ECO 2000
Instruction Set
Sleep Mode Logic
Sensors/Filters
Interrupt
16-bit
Timer
CRC
RNG
PLL
Voltage Regulator
Figure 2: Block Diagram SLE 66C162P
The CRC module allows the easy generation of checksums according to ISO/IEC 3309 (16-Bit-
CRC). To minimize the overall power consumption, the chip card controller IC offers a sleep mode.
The UART supports the half-duplex transmission protocols T=0 and T=1 according to ISO/IEC
7816-3. All relevant transmission parameters can be adjusted by software, as e.g. the clock
division factor, direct/inverse convention and the number of stop bits. Additionally, the I/O port can
be driven by communication routines realized in software.
The random number generator (RNG) is able to supply the CPU with true random numbers on all
conditions.
As an important feature, the chip provides a new and enhanced level of on-chip security.
In conclusion, the SLE 66C162P fulfills the requirements of today's chip card applications, as
GSM, and offers a powerful platform for future multi application cards. The SLE 66C162P
integrates outstanding memory sizes, additional peripherals in combination with enhanced
performance and optimized power consumption on a minimized die size. Therefore, the SLE
66C162P offers the basis for a generation of new chip card applications.
Short Product Information
7 / 7
08.01
相关型号:
©2020 ICPDF网 联系我们和版权申明