TLE9461ES [INFINEON]
Lite LDO System Basis Chip supports CAN Flexible Data-Rate(FD) and Partial Networking (PN);型号: | TLE9461ES |
厂家: | Infineon |
描述: | Lite LDO System Basis Chip supports CAN Flexible Data-Rate(FD) and Partial Networking (PN) |
文件: | 总2页 (文件大小:539K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product Brief
TLE9461
Lite LDO System Basis Chip supports CAN Flexible Data-Rate
(FD) and Partial Networking (PN)
The Lite SBC family (TLE94x1) is available as 5V or 3.3V output voltage version for
Key features
microcontrollers, network transceivers, sensors and other peripherals’ power supply.
The Lite LDO SBCs feature a low-dropout voltage regulator with an output current of
150mA as well as an auxiliary 5V low-dropout voltage regulator with 100mA of output
current. The communication interface incorporates one CAN transceiver with Flexible
Data-Rate performance up to 5Mbit/s according to ISO 11898-2:2016 (including
Partial Networking option). It complies with the latest automotive standards and OEM
requirements. All devices feature a PG-TSDSO-24 (8.65mm x 6mm). The entire Lite
SBC family (TLE94x1) is hardware compatible, and is also software compatible with
TLE926x & TLE927x.
› 5V/3.3V Linear Voltage Regulator up to
150mA (Vcc1)
› 5V Linear Voltage Regulator up to
100mA (Vcc2)
› CAN FD up to 5Mbps (acc. to ISO
11898-2:2016), CAN PN and FD
Tolerant (“-3” variants)
› 1x HV Wake input, Watchdog, Reset,
Interrupt, Fail Output
Key benefits
› Charge Pump Output for Load Switch /
Reverse Current Protection
› Alternative Functions for Fail Output:
Wake, Low-Side or High-Side Switch
(up to 45mA)
› Reduced system cost through low component count and small PCB footprint
› Integrated charge pump that can drive an external N-FET
› Extends battery life with very low quiescent current modes
› Enables design flexibility and reduces software design effort by shared state
machine and SPI access within the entire Lite SBC family
› Meets major car OEM requirements with excellent EMC and ESD performance
› Low Power Modes with full wake
capability
Block diagram
Key applications
› Steering column and steering lock
› Seat control module
› Seat belt pretension
› Closure (power lift gate, sliding door,
etc.)
› Heating, ventilation and air conditioning
(HVAC)
› Gear shifter and selectors
› Light Control Unit (LCU) for front, and
rear
› Smart Power Distribution modules
› Fuel pump
ꢀwww.infineon.com
Product Brief
TLE9461
Lite LDO System Basis Chip supports CAN Flexible Data-Rate
(FD) and Partial Networking (PN)
Application diagram
Product Table
Product Variant
TLE9461ES
TLE9461-3ES
TLE9461ESV33
TLE9461-3ESV33
VCC1
VCC2
CAN FD
CAN PN
×
x
5V up to 150mA
5V up to 150mA
3.3V up to 150mA
3.3V up to 150mA
5V up to 100mA
5V up to 100mA
5V up to 100mA
5V up to 100mA
Published by
Please note!
Additional information
Infineon Technologies AG
85579 Neubiberg, Germany
THIS DOCUMENT IS FOR INFORMATION PURPOSES
ONLY AND ANY INFORMATION GIVEN HEREIN SHALL IN
For further information on technologies, our products, the
application of our products, delivery terms and conditions
and/or prices please contact your nearest Infineon
Technologies office (www.infineon.com).
NO EVENT BE REGARDED AS
GUARANTEE OR DESCRIPTION
FUNCTIONALITY, CONDITIONS AND/OR QUALITY OF
OUR PRODUCTS OR ANY SUITABILITY FOR
A
WARRANTY,
© 2015 Infineon Technologies AG.
All Rights Reserved.
OF ANY
A
Warnings
PARTICULAR PURPOSE. WITH REGARD TO THE
TECHNICAL SPECIFICATIONS OF OUR PRODUCTS, WE
KINDLY ASK YOU TO REFER TO THE RELEVANT
PRODUCT DATA SHEETS PROVIDED BY US. OUR
CUSTOMERS AND THEIR TECHNICAL DEPARTMENTS
ARE REQUIRED TO EVALUATE THE SUITABILITY OF
OUR PRODUCTS FOR THE INTENDED APPLICATION.
Due to technical requirements, our products may contain
dangerous substances. For information on the types in
question please contact your nearest Infineon Technologies
office.
Except as otherwise explicitly approved by us in a written
document signed by authorized representatives of Infineon
Technologies, our products may not be used in any life
endangering applications, including but not limited to medical,
nuclear, military, life critical or any other applications where a
failure of the product or any consequences of the use thereof
can result in personal injury.
WE RESERVE THE RIGHT TO CHANGE THIS DOCUMENT
AND/OR THE INFORMATION GIVEN HEREIN AT ANY
TIME.
Order Number: B000-H0000-X-X-7600
Date: MMꢀ/ꢀ2015
相关型号:
TLE9461ESV33
Lite LDO System Basis Chip supports CAN Flexible Data-Rate(FD) and Partial Networking (PN)
INFINEON
TLE9561QX
The device is designed for various motor control automotive applications. To support these applications, the device provides the main functions, such as a 5 V lowdropout voltage regulator one HS-CAN transceiver supporting CAN FD, four half-bridges for DC motor control, and one 32 bit serial peripheral interface (SPI). The device includes diagnostic and supervision features, such as drain-source monitoring and open-load detection, short circuit protection, configurable time-out and window watchdog, fail-safe output, as well as overtemperature protection.
INFINEON
TLE9562-3QX
The device is designed for various motor control automotive applications. To support these applications, the device provides the main functions, such as a 5 V lowdropout voltage regulator one HS-CAN transceiver supporting CAN FD, CAN Partial Networking (incl. FD Tolerant Mode), one LIN transceiver, four half-bridges for DC motor control, and one 32 bit serial peripheral interface (SPI). The device includes diagnostic and supervision features, such as drain-source monitoring and open-load detection, short circuit protection, configurable time-out and window watchdog, fail-safe output, as well as overtemperature protection.
INFINEON
TLE9563-3QX
The device is designed for various motor control automotive applications. To support these applications, the device provides the main functions, such as a 5 V lowdropout voltage regulator one HS-CAN transceiver supporting CAN FD, CAN Partial Networking (incl. FD Tolerant Mode), three half-bridges for BDLC motor control, one current sense amplifier and one 32 bit serial peripheral interface (SPI). The device includes diagnostic and supervision features, such as drain-source monitoring and open-load detection, short circuit protection, configurable time-out and window watchdog, fail-safe output, as well as overtemperature protection.
INFINEON
TLE9564QX
The device is designed for various motor control automotive applications. To support these applications, the device provides the main functions, such as a 5 V lowdropout voltage regulator , one LIN transceiver, three half-bridges for BDLC motor control, one current sense amplifier and one 32 bit serial peripheral interface (SPI). The device includes diagnostic and supervision features, such as drain-source monitoring and open-load detection, short circuit protection, configurable time-out and window watchdog, fail-safe output, as well as overtemperature protection.
INFINEON
TLE9831QV
Smart LIN-based Relay Driver IC & Switch Panel Interface with integrated 8-bit MCU
INFINEON
©2020 ICPDF网 联系我们和版权申明