XDPE152C4D-0000 [INFINEON]

The XDP™ XDPE152C4D is a hyper transient phase controller. Core voltage is provided by a multiphase buck converter with up to 12 synchronous-rectified channels in parallel while a second loop provides voltage for the I/O. The XDPE152C4D phase configuration is flexible in how the phases are allocated to the 2 loops. Any phase can be assigned to either loop, and the phase firing order is fully programmable to offer the ultimate in phase configuration flexibility. Typically, configurations of 12+0, 11+1, 10+2, 8+4, or 6+6 phases are supported.;
XDPE152C4D-0000
型号: XDPE152C4D-0000
厂家: Infineon    Infineon
描述:

The XDP™ XDPE152C4D is a hyper transient phase controller. Core voltage is provided by a multiphase buck converter with up to 12 synchronous-rectified channels in parallel while a second loop provides voltage for the I/O. The XDPE152C4D phase configuration is flexible in how the phases are allocated to the 2 loops. Any phase can be assigned to either loop, and the phase firing order is fully programmable to offer the ultimate in phase configuration flexibility. Typically, configurations of 12+0, 11+1, 10+2, 8+4, or 6+6 phases are supported.

文件: 总7页 (文件大小:148K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
XDPE152C4D  
XDPE152C4D Digital Multi-phase Controller  
12-phase Dual Loop Voltage Regulator  
Features  
Digital controller assisted with high performance analog front ends with a fully programmable ARM®  
CortexTM –M0 Processor  
Compliant with IntelVR13, VR13HC, and VR14 Server VR Vendor PWM Enabling Specification Rev 1.88  
(October 2021)  
Compliant with IntelSVID Rev 1.94 (April 2021)  
Compliant with PMBus Rev 1.3.1 (March 2015) serial interface  
Query voltage, current, temperature faults  
Fault Response  
Maximum supported bus speed 1 MHz  
Support 1.8/3.3 V operation  
Output voltage regulation range  
0.25 V to 1.52 V (5 mV/step)  
0.5 V to 3.04 V (10 mV/step)  
Digitally controlled phasing for full flexibility in both loop configuration and phase firing order  
Digital current emulation for TLVR inductor support  
Configurable autonomous phase add/drop  
Automatic phase detection at start-up  
Supports start-up into pre-bias voltage  
Integrated power stage current sense  
Differential output voltage sense  
Fast current balancing with current-mode control  
Digitally programmable PID (Proportional, Integral, Differential) loop compensation  
Digitally programmable loadline slope  
Digital temperature compensation  
Direct input (+12 V) voltage and current sense  
Extensive fault detection and protection capability  
IUVP, OUVP & OOVP (fixed and tracking)  
OCP instantaneous (total current)  
Multiple OTP thresholds  
Peak phase current pulse limiting  
Negative current limit protection  
TLVR secondary Open/Short detection  
Internal non-volatile memory (NVM) to store multiple custom configurations  
RoHS compliant and Halogen free 48-lead QFN plastic package  
Final Datasheet  
www.infineon.com  
Please read the Important Notice and Warnings at the end of this document  
1 of 7  
Rev 2.0  
2022-03-31  
 
XDPE152C4D Digital Multi-phase Controller  
12-phase Dual Loop Voltage Regulator  
Potential applications  
Potential applications  
Vcore power regulation for IntelVR13, VR13HC, VR14 based Microprocessors  
Servers  
Workstations  
High-end desktops  
High Current ASIC, PMBus POLs  
Product validation  
Qualified for industrial applications according to the relevant tests of JEDEC47/20/22/78  
Description  
The XDPE152C4 digital dual loop 12 phase controller provides power for IntelVR13, VR13HC, VR14 server,  
workstation, and high-end desktop applications. Core voltage is provided by a multi-phase buck converter with  
up to 12 synchronous-rectified channels in parallel while a second loop provides voltage for the I/O. The  
XDPE152C4 phase configuration is flexible in how the phases are allocated to the 2 loops. Any phase can be  
assigned to either loop and the phase firing order is fully programmable to offer the ultimate in phase  
configuration flexibility. Typically, configurations of 12+0, 11+1, 10+2, 8+4 or 6+6 phases are supported.  
Command and monitoring functions are controlled through the PMBus and SVID interfaces which supports  
dynamic voltage identification with 5 mV/step or 10 mV/step in Intel mode, output range up to 3.04 V, offset  
and trim resolution of 625 uV and accuracy better than 0.5%.  
The XDPE152C4 controller utilizes digital technology to implement all control functions, providing the ultimate  
system solution in terms of flexibility and stability. Advanced control loop features, such as current mode  
control, variable frequency operation, Active Transient Response (ATR/FATR), fast DVID response, automatic  
phase shedding and Pulse Frequency Modulation (PFM) enable optimal response to a highly dynamic load with  
fast di/dt load transients across a wide range of load current.  
The XDPE152C4 controller supports multi-vendor pin compatible integrated power stages with trivalent PWM  
interfaces, fast response, integrated current sense, integrated temperature sense, and advanced fault  
detection capability, interface and signaling.  
In addition to supporting power stage fault protection features, the XDPE152C4 controller also includes a set of  
sophisticated over-voltage, under-voltage, over-temperature, over-current, and phase fault protections. These  
attributes provide a complete and advanced protection feature set for microprocessor and power systems.  
Infineon strongly recommends pairing Infineon’s powerstages with our Digital XDPfamily of controllers to ensure  
correct interoperability. Interoperability when pairing with other vendor power stages/ discrete power  
components cannot be guaranteed by Infineon and requires thorough evaluation and characterization by the  
power stage/ discrete power component vendor.  
Table 1  
Part number and package summary  
Package  
Part Number  
XDPE152C4D  
48-lead 6 mm x 6 mm QFN  
PG-VQFN-48  
Final Datasheet  
2 of 7  
Rev 2.0  
2022-03-31  
 
 
 
XDPE152C4D Digital Multi-phase Controller  
12-phase Dual Loop Voltage Regulator  
Table of contents  
Table of contents  
Features ........................................................................................................................................ 1  
Potential applications..................................................................................................................... 2  
Product validation.......................................................................................................................... 2  
Description .................................................................................................................................... 2  
Table of contents............................................................................................................................ 3  
1
2
3
Ordering information ............................................................................................................. 4  
Package marking ................................................................................................................... 5  
Environmental qualifications .................................................................................................. 6  
Final Datasheet  
3 of 7  
Rev 2.0  
2022-03-31  
 
XDPE152C4D Digital Multi-phase Controller  
12-phase Dual Loop Voltage Regulator  
Ordering information  
1
Ordering information  
Table 2  
Ordering information  
Base Part Number  
Package Type  
Standard Pack  
Orderable Part Number  
Form and Quantity  
XDPE152C4D  
QFN 6 mm x 6 mm  
Tape and Reel  
4000  
XDPE152C4D0000XUMA1  
Note 1  
XDPE152C4DxyzzXUMA1  
Note 2  
Note:  
1. Standard Part Number with default configuration  
2. Customer Specific Part Number, where x = Firmware ID, and yzz = Custom Config File ID (Codes assigned by  
Product Marketing).  
Sample Programming  
The customer can program the parts to their specific system requirements using software/hardware available  
from Infineon or through other controller programming 3rd Parties (contact Infineon for recommendations).  
Infineon Field Application Engineers are available to assist with system and configuration file optimization and  
programming of the controllers. Alternatively, samples can be ordered with a customer specific configuration  
pre-programmed at the factory, but lead times for these types of samples are significantly longer than for  
standard default configuration samples. The generic part numbering format is shown below:  
X D P E 1 5 2 C 4 D xyzz  
Prefix  
Configuration Control  
Version Control  
Part Number  
5 characters  
Figure 1  
Part number decoding  
Final Datasheet  
4 of 7  
Rev 2.0  
2022-03-31  
 
 
 
XDPE152C4D Digital Multi-phase Controller  
12-phase Dual Loop Voltage Regulator  
Package marking  
2
Package marking  
Figure 2  
Package marking  
Final Datasheet  
5 of 7  
Rev 2.0  
2022-03-31  
 
XDPE152C4D Digital Multi-phase Controller  
12-phase Dual Loop Voltage Regulator  
Environmental qualifications  
3
Environmental qualifications  
Table 3  
Qualification Level  
Moisture Sensitivity  
Industrial  
QFN Package  
MSL3  
Human Body Model  
JESD22-A114-F, Class 2  
JESD22-C101-F, Class C3  
JESD78D Class 2  
Yes  
Charged Device Model  
Latch-up  
ESD  
RoHS Compliant  
Final Datasheet  
6 of 7  
Rev 2.0  
2022-03-31  
 
Trademarks  
All referenced product or service names and trademarks are the property of their respective owners.  
IMPORTANT NOTICE  
Edition 2022-03-31  
The information given in this document shall in no For further information on the product, technology,  
event be regarded as a guarantee of conditions or delivery terms and conditions and prices please  
Published by  
characteristics (“Beschaffenheitsgarantie”) .  
contact your nearest Infineon Technologies office  
(www.infineon.com).  
Infineon Technologies AG  
81726 Munich, Germany  
With respect to any examples, hints or any typical  
values stated herein and/or any information  
regarding the application of the product, Infineon  
Technologies hereby disclaims any and all  
warranties and liabilities of any kind, including  
without limitation warranties of non-infringement  
of intellectual property rights of any third party.  
WARNINGS  
Due to technical requirements products may  
contain dangerous substances. For information on  
the types in question please contact your nearest  
Infineon Technologies office.  
© 2022 Infineon Technologies AG.  
All Rights Reserved.  
Do you have a question about this  
document?  
In addition, any information given in this document  
is subject to customer’s compliance with its  
obligations stated in this document and any  
applicable legal requirements, norms and  
standards concerning customer’s products and any  
use of the product of Infineon Technologies in  
customer’s applications.  
Except as otherwise explicitly approved by Infineon  
Technologies in  
a written document signed by  
authorized  
representatives  
of  
Infineon  
Email: erratum@infineon.com  
Technologies, Infineon Technologies’ products may  
not be used in any applications where a failure of  
the product or any consequences of the use thereof  
can reasonably be expected to result in personal  
injury.  
Document reference  
The data contained in this document is exclusively  
intended for technically trained staff. It is the  
responsibility of customer’s technical departments  
to evaluate the suitability of the product for the  
intended application and the completeness of the  
product information given in this document with  
respect to such application.  

相关型号:

XDPL8210

Switching Controller,
INFINEON

XDPL8219

数字高功率因数 XDP™ 控制器,可用于具有次级侧稳压恒压输出的经济型双级 LED 驱动器
INFINEON

XDPL8220XUMA1

Power Factor Controller, PDSO16, DSO-16
INFINEON

XDPL8221

Digital high power factor XDP™ controller for advanced, dual stage LED drivers with constant voltage primary side regulation
INFINEON

XDPP1100-Q024

英飞凌推出业界中尺寸最小的 24 引脚 VQFN 封装数字电源控制器。这款高度集成的可编程XDP™ 数字电源控制器 XDPP1100-Q024 可提供先进的电源控制解决方案。该产品面向广泛的直流-直流电源应用,并支持各种隔离和非隔离拓扑。
INFINEON

XDPP1100-Q040

XDPP1100-Q040 是一款高度集成的可编程 XDP™数字电源控制器。该器件为各种直流-直流电源应用提供高级电源控制解决方案,并支持各种隔离和非隔离拓扑。
INFINEON

XDPS21071

Switching Controller,
INFINEON

XDPS21081

英飞凌 XDPS21081 是一款反激式控制器IC,其初级侧引入 ZVS (零电压开关),通过简化电路和经济型开关来实现更高的工作效率。与传统的谷值开关方案相比,通过驱动外部低压开关产生负电流使主高压开关 MOSFET 放电,从而进一步降低开关损耗。 为了以同步整流实现更高效率,XDPS21081 多模式数字强制准谐振 (FQR) 反激控制器 IC 通过谷值检测来确保 DCM (非连续导通模式)工作模式,从而实现更安全可靠的运行。
INFINEON

XDPS2201

XDP™ 数字电源 XDPS2201是一种多模式、数字可配置的混合反激控制器,它结合了传统简化的反激拓扑结构和谐振变换器的性能。通过使用两个高压MOSFET,例如CoolMOSTM,混合反激XDPS2201控制器能够在不对称半桥反激拓扑中驱动高压侧和低压侧MOSFET。通过调节正负磁化电流的方法,可以在初级实现零电压开关和次级实现零电流开关,提高了效率。此外,变压器漏感能量被回收,更进一步提高效率。
INFINEON

XDR1

REIBAHLE HEXIBIT3 BIS 7MM
ETC

XDRA821UXXGALM

Dual Arm Cortex-A72, quad Cortex-R5F, 4-port Ethernet switch, and a PCIe controller | ALM | 433 | -40 to 125
TI

XDS510

Comprehensive DSP Tool Solutions
SPECTRUM