BXNUC9I9QNX6 [INTEL]

NUC9VXQNX;


型号：	BXNUC9I9QNX6
厂家：	INTEL
描述：	NUC9VXQNX
文件：	总23页 (文件大小：1049K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Intel® NUC kit NUC9VXQNX

Intel® NUC kit NUC9V7QNX

Intel® NUC kit NUC9i9QNX

Intel® NUC kit NUC9i7QNX

Intel® NUC kit NUC9i5QNX

User Guide

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

You may not use or facilitate the use of this document in connection with any infringement or other legal analysis concerning Intel products

described herein. You agree to grant Intel a non-exclusive, royalty-free license to any patent claim thereafter drafted which includes subject

matter disclosed herein.

No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this document.

All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel product

specifications and roadmaps.

The products described may contain design defects or errors known as errata which may cause the product to deviate from published

specifications. Current characterized errata are available on request.

Copies of documents which have an order number and are referenced in this document may be obtained by calling 1-800-548-4725 or by

visiting: http://www.intel.com/design/literature.htm.

Intel technologies' features and benefits depend on system configuration and may require enabled hardware, software or service activation.

Performance varies depending on system configuration. No computer system can be absolutely secure.

Intel and the Intel logo are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other countries.

*Other names and brands may be claimed as the property of others.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

Contents

1.0

Introduction .............................................................................................................................5

1.1

1.2

1.3

Before You Begin...........................................................................................................................................5

Installation Precautions.............................................................................................................................6

Observe Safety and Regulatory Requirements.........................................................................6

2.0

3.0

4.0

5.0

6.0

7.0

8.0

9.0

Open the Chassis...................................................................................................................7

System Memory....................................................................................................................10

Change the M.2 SSD...........................................................................................................13

Install a 2.5” SSD or Hard Drive.................................................................................15

Close the Chassis.................................................................................................................16

Connect Power......................................................................................................................20

Install an Operating System.........................................................................................22

Install the Latest Device Drivers and Software ................................................23

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

Revision History

Date

Revision

Description

1.0

1.1

Initial release.

Updated the section 5.0

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

1.0

Introduction

This User Guide provides step-by-step installation instructions for these products:

•

Intel® NUC kit NUC9VXQNX

Intel® NUC kit NUC9V7QNX

Intel® NUC kit NUC9i9QNX

Intel® NUC kit NUC9i7QNX

Intel® NUC kit NUC9i5QNX

1.1

Before You Begin

CAUTIONS

The steps in this guide assume you’re familiar with computer terminology and

with the safety practices and regulatory compliance required for using and

modifying computer equipment.

Disconnect the computer from its power source and from any network before

performing any of the steps described in this guide.

Failure to disconnect power, telecommunications links, or networks before you open

the computer or perform any procedures can result in personal injury or equipment

damage. Some circuitry on the board can continue to operate even though the front

panel power button is off.

Follow these guidelines before you begin:

•

Always follow the steps in each procedure in the correct order.

Create a log to record information about your computer, such as model,

serial numbers, installed options, and configuration information.

Electrostatic discharge (ESD) can damage components. Perform the

procedures described in this chapter only at an ESD workstation using an

antistatic wrist strap and a conductive foam pad. If such a station isn’t

available, you can provide some ESD protection by wearing an antistatic wrist

strap and attaching it to a metal part of the computer chassis.

•

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

1.2

Installation Precautions

When you install and test the Intel NUC, observe all warnings and cautions in the

installation instructions.

To avoid injury, be careful of:

•

Sharp pins on connectors

Sharp pins on circuit boards

Rough edges and sharp corners on the chassis

Hot components (such as SSDs, processors, voltage regulators, and heat sinks)

Damage to wires that could cause a short circuit

Observe all warnings and cautions that instruct you to refer computer servicing

to qualified technical personnel.

1.3

Observe Safety and Regulatory Requirements

If you don’t follow these instructions, you increase your safety risk and the possibility

of noncompliance with regional laws and regulations.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

2.0

Open the Chassis

1. Unscrew the two top screws on the rear side of the chassis and shift the cover:

2. Remove the left side panel:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

3. Remove the cross bar bracket:

4. Fold the air guide back:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

5. Unscrew the two bottom screws and open the NUC door:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

3.0

System Memory

Intel® NUC kit NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX and NUC9i5QNX

have two 260-pin DDR4 SO-DIMM sockets. Be sure to select memory modules that

meet these requirements:

•

1.2V low voltage memory

1.35V via XMP support – NUC9i9QNX, NUC9i7QNX and NUC9i5QNX

SKUs Only

•

2666 MHz SO-DIMMs

Max capacity - 64GB

Non-ECC

ECC supported by the NUC9VXQNX only

Find compatible memory modules in the Intel Product Compatibility Tool

•

NUC9VXQNX

NUC9V7QNX

NUC9i9QNX

NUC9i7QNX

NUC9i5QNX

NOTE If you plan to install only one memory module, install it in the lower

memory socket.

To install memory, follow these steps:

1. Observe the precautions in "Before You Begin" on page 5.

2. Turn off all peripheral devices connected to the computer. Turn off the

computer and disconnect the power cord.

3. Remove the computer’s bottom chassis cover.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

4. Align the small space at the bottom edge of the memory module with the

key in the socket.

5. Insert the bottom edge of the module at a 45-degree angle into the socket (A).

6. When the module is inserted, push down on the outer edge of module

until the retaining clips snap into place (B). Make sure the clips are

firmly in place (C).

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

To remove a SO-DIMM, follow these steps:

1. Observe the precautions in "Before You Begin" on page 5.

2. Turn off all peripheral devices connected to the computer. Turn off the

computer and disconnect the power cord.

3. Remove the computer’s bottom chassis cover.

4. Gently spread the retaining clips at each end of the memory socket, which

causes the module to pop out of the socket (C).

5. Holding the module by the edges, lift it away from the socket, and store it in an

anti-static package.

6. Reinstall and reconnect any parts you removed or disconnected to reach the

memory sockets.

7. Replace the computer’s cover and reconnect the power cord.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

4.0

Change the M.2 SSD

Intel® NUC kit NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX and NUC9i5QNX

support dual 42, 80 and single 110mm SSDs.

There are no pre-installed SSD available out of the box for the above SKUs.

Find compatible M.2 SSDs in the Intel Product Compatibility Tool:

•

NUC9VXQNX

NUC9V7QNX

NUC9i9QNX

NUC9i7QNX

NUC9i5QNX

To install a different M.2 SSD:

1. Remove the small silver screw from the 110mm, 80mm or 42mm metal standoff

on the board (A).

2. Remove the pre-installed SSD from the connector if there are any.

3. Make sure there is the metal standoff in the right position, depending on the

length of the SSD you are going to install (B or C)

4. Align the space at the bottom of the new M.2 SSD to the key on the connector

(D).

5. Secure the card to the standoff with the small silver screw (E).

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

5.0

Install a 2.5” SSD or Hard Drive

Intel® NUC NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX and NUC9i5QNX

support an additional 2.5” Solid State Drive (SSD) or Hard Disk Drive (HDD).

Find compatible 2.5” drives in the Intel Product Compatibility Tool:

•

NUC9VXQNX

NUC9V7QNX

NUC9i9QNX

NUC9i7QNX

NUC9i5QNX

Note:

1) The internal FPC Style SATA/Power SATA 6.0 Gb/s powered port is available on NUC

9 Extreme/Pro Compute Element but is not usable on the NUC 9 Extreme/Pro Kit. The

SATA cable and the drive bay are not provided with the Kit and should be purchased

separately.

2) 3.5” drives are not supported.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

6.0

Close the Chassis

After all components have been installed, close the Intel NUC chassis. Intel

recommends this be done by hand with a screwdriver to avoid over-tightening and

possibly damaging the screws.

1. Close the NUC door and connect two bottom screws:

2. Fold the air guide into place:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

3. Install cross bar bracket:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

4. Install the left side panel:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

5. Install the top cover and apply the power cable:

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

7.0

Connect Power

Each Intel NUC model includes either a region-specific AC power cord or no AC power

cord.

Product codes

Power cord type

No power cord included. An AC power cord needs to be

purchased separately. The connector on the power

adapter is a C13 type connector.

BKNUC9VXQNX

BKNUC9V7QNX

BXNUC9i9QNX

BXNUC9i7QNX

BXNUC9i5QNX

BKNUC9VXQNX1

BKNUC9V7QNX1

BXNUC9i9QNX1

BXNUC9i7QNX1

BXNUC9i5QNX1

BKNUC9VXQNX2

BKNUC9V7QNX2

BXNUC9i9QNX2

BXNUC9i7QNX2

BXNUC9i5QNX2

BKNUC9VXQNX3

BKNUC9V7QNX3

BXNUC9i9QNX3

BXNUC9i7QNX3

BXNUC9i5QNX3

BKNUC9VXQNX4

BKNUC9V7QNX4

BXNUC9i9QNX4

BXNUC9i7QNX4

BXNUC9i5QNX4

BKNUC9VXQNX6

BKNUC9V7QNX6

BXNUC9i9QNX6

BXNUC9i7QNX6

BXNUC9i5QNX6

US power cord included.

EU power cord included.

UK power cord included.

Australia/New Zealand power cord included.

China power cord included.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

8.0

Install an Operating System

See Supported Operating Systems for a list of Intel-validated Windows* operating

systems.

The Intel Product Compatibility Tool lists versions of Linux* that have been reported

as compatible by Intel NUC owners. If you need assistance with Linux on your Intel

NUC, check the distribution’s website and forums for peer assistance.

Refer to Operating System Installation for system requirements and installation steps.

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

9.0

Install the Latest Device Drivers and Software

Here are the options for keeping device drivers current:

•

Allow the Intel® Driver & Support Assistant (Intel® DSA) to detect out-of-

date drivers

Manually download drivers, BIOS, and software from Download Center:

NUC9VXQNX

NUC9V7QNX

NUC9i9QNX

NUC9i7QNX

NUC9i5QNX

The following device drivers and software are available.

•

Intel® Chipset Device Software

Intel® Graphics

Intel® Management Engine

Intel® Gigabit Ethernet

Intel® Wireless

Intel® Bluetooth

Realtek* High Definition Audio

Intel® Rapid Storage Technology

Thunderbolt® Networking Driver

NUC9VXQNX, NUC9V7QNX, NUC9i9QNX, NUC9i7QNX, NUC9i5QNX

User Guide – May 2020

BXNUC9I9QNX6 [INTEL]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E