HS-1410RH [INTERSIL]

Radiation Hardened, High Speed, Low Power, Current Feedback Op Amp with Output Disable; 抗辐射，高速，低功耗，电流反馈运算放大器输出禁用


型号：	HS-1410RH
厂家：	Intersil
描述：	Radiation Hardened, High Speed, Low Power, Current Feedback Op Amp with Output Disable 抗辐射，高速，低功耗，电流反馈运算放大器输出禁用运算放大器
文件：	总2页 (文件大小：26K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HS-1410RH

Data Sheet

August 1999

File Number 4470.1

Radiation Hardened, High Speed, Low

Power, Current Feedback Op Amp with

Output Disable

Features

• Electrically Screened to SMD # 5962-98518

• QML Qualiﬁed per MIL-PRF-38535 Requirements

• Radiation Environment

The Radiation Hardened HS-1410RH is a high speed, low

power current feedback ampliﬁer built with Intersil’s

proprietary complementary bipolar UHF-1 (DI, bonded

wafer) process. This technology provides an immunity to

Single Event Latch-up and the capability of highly reliable

performance in any radiation environment. These devices

are QML approved and are manufactured and screened in

full compliance with MIL-PRF-38535.

- Total Dose. . . . . . . . . . . . . . . . . . . . . . . 3 x 10 RAD(Si)

- SEL. . . . . . . . . . . . . . None (Bonded Wafer DI Process)

• Wide 3dB Bandwidth (Typ). . . . . . . . . . . . . . . . . . 360MHz

• High Slew Rate (Typ) . . . . . . . . . . . . . . . . . . . . 1000V/µS

• High Output Current (Typ) . . . . . . . . . . . . . . . . . . . . 60mA

• Low Supply Current (Typ). . . . . . . . . . . . . . . . . . . . 5.9mA

• Output Enable/Disable Time (Typ) . . . . . . . . . 180ns/35ns

• Upgrade for CLC410/411

This amplifier features a TTL/CMOS compatible DISABLE

control, pin 10, which when pulled low, reduces the supply

current and forces the output into a high impedance state.

This allows easy implementation of simple, low power

multiplexing circuits in redundant spacecraft designs. The

wide bandwidth and fast slew rate make these devices

ideal for pulse and video amplifier and routing applications.

The high output current and disable feature provide the

perfect combination needed for A/D driver/multiplexer

circuits.

Applications

• Multiplexing Flash A/D Drivers

• High Speed Signal Switching and Routing

• Pulse and Video Ampliﬁers

• Wideband Ampliﬁers

Speciﬁcations for Rad Hard QML devices are controlled

by the Defense Supply Center in Columbus (DSCC). The

SMD numbers listed here must be used when ordering.

• Imaging Systems

Detailed Electrical Speciﬁcations for these devices are

contained in SMD 5962-98518. A “hot-link” is provided

on our homepage for downloading.

Pinout

HS9-1410RH (FLATPACK) CDFP3-F10

TOP VIEW

http://www.intersil.com/spacedefense/space.htm

-IN

+IN

V-

DISABLE

V+

Ordering Information

INTERNAL

TEMP. RANGE

OUT

ORDERING NUMBER

MKT. NUMBER

( C)

5962F9851801VXC

HS9-1410RH-Q

-55 to 125

CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.

HS-1410RH

Die Characteristics

DIE DIMENSIONS:

Substrate:

UHF-1, Bonded Wafer, DI

59 mils x 59 mils x 19 mils ±1 mil

(1500µm x 1500µm x 483µm ± 25.4µm)

ASSEMBLY RELATED INFORMATION:

INTERFACE MATERIALS:

Glassivation:

Substrate Potential (Powered Up):

Floating (Recommend Connection to V-)

Type: Nitride

Thickness: 4kÅ ±0.5kÅ

ADDITIONAL INFORMATION:

Transistor Count:

Top Metallization:

Type: Metal 1: AICu(2%)/TiW

Thickness: Metal 1: 8kÅ ±0.4kÅ

Type: Metal 2: AICu(2%)

Thickness: Metal 2: 16kÅ ±0.8kÅ

Metallization Mask Layout

HS-1410RH

DISABLE

-IN

V+

OUT

+IN

V-

OPTIONAL GND (NOTE)

NOTE: This pad is not bonded out on packaged units. Die users may set a GND reference, via this pad, to ensure the TTL compatibility of the DIS

input when using asymmetrical supplies (e.g. V+ = 10V, V- = 0V).

All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certiﬁcation.

Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-

out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and

reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result

from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.

For information regarding Intersil Corporation and its products, see web site http://www.intersil.com

相关型号：