9221J1Z4QD12 [ITT]

Power Rocker and Lever Handle Switches; 电源摇臂开关手柄


型号：	9221J1Z4QD12
厂家：	ITT Cannon
描述：	Power Rocker and Lever Handle Switches 电源摇臂开关手柄开关
文件：	总5页 (文件大小：519K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C&K 9000 Series

Power Rocker and Lever Handle Switches

Features/Benefits

• Thermoset UL 94V-0 housing

• Rugged construction

Typical Applications

• Small equipment

• Shut-off switch

• Variety of actuator and

termination options

• RoHS compliant

Models Available

Specifications

Materials

CONTACT RATING: 9201 Model: 6 AMPS @ 120 V AC or 28 V DC;

3 AMPS @ 250 V AC. 9221 Model: 10 AMPS @ 125 V AC or

28 V DC; 5 AMPS @ 250 V AC.

CASE: Diallyl phthalate (DAP) (UL 94V-0).

ACTUATOR: Nylon, black standard.

FRAME-REAR MOUNT OPTIONS: Spring steel, black.

BUSHING: Brass, nickel plated.

ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.

CONTACT RESISTANCE: Below 10 m Ω typ. initial @

HOUSING: Stainless steel.

2–4 V DC, 100 mA.

SWITCH SUPPORT: Brass or steel, matte-tin plated.

MOUNTING BRACKET: Stainless steel.

INSULATION RESISTANCE: 10 Ω min.

DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

END CONTACTS: 9201 Model: Coin silver, silver plated.

9221 Model: Silver cadmium oxide.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

CENTER CONTACTS: Copper alloy, silver plated

ALL TERMINALS: 9201 Model: Copper alloy, silver plated.

9221 Model: Copper alloy, matte-tin plated.

NOTE: Any models supplied with Q contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

TERMINAL SEAL: Epoxy.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

HARDWARE: Nut, Screw & Lockwasher: Stainless steel. Standoff:

Nylon standard, aluminum available, consult Customer

Service Center.

*Cadmium used in electrical contacts is acceptable for RoHS.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages H-53 through H-57. For additional options not shown in catalog, consult Customer Service Center.

Switch Function

9201 DP On-On, 6 Amps

9221 DP On-On, 10 Amps

Actuator

J1 Rocker

J2 Lever

J3 Rocker

J37 Rocker with metal frame

Terminations

Solder lug (9201 only)

AV2 Vertical right angle, PC thru-hole (9201 only)

PC Thru-hole (9201 only)

Z4 Quick connect

Contact Material

Silver

Seal

Epoxy

No Seal

Actuator Color

Black

White

Red

Frame Color

Black

NONE No frame color required

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–53

C&K 9000 Series

Power Rocker and Lever Handle Switches

SWITCH FUNCTION

POS. 1 POS. 2

CONNECTED TERMINALS

POS. 1

POS. 2

NO.

POLES

MODEL NO.

RATING*

SCHEMATIC

9201

9221

6 AMPS

2-3,5-6

2-1,5-4

10 AMPS

DPDT

.140 DIA.(3,56ø)

w/ J10 actuator

1.875

1.625

(47,62)

w/ J10

actuator

(41,28)

w/ J10

actuator

Part number shown: 9201J1ZQE2

Terminal Nos.

Molded On Side Of Case

All 9000 Series models meet international dimensional and electrical requirements.

* See CONTACT MATERIAL, page H-58, for complete ratings.

9221 model must be ordered with Z4 terminations and D seal option.

ACTUATOR COLOR

ACTUATOR–PANEL MOUNT

ACTUATOR

J1 ROCKER

OPTION

CODE

ACTUATOR

COLOR

BLACK

WHITE

RED

Finish: Matte. Other colors, custom actuator

markings and legends available, consult

Customer Service Center.

NOTE: Hardware: two each—mounting screws, nuts,

lockwashers and standoffs for 1/8 inch

thick panel are supplied standard on all switches with

panel mounting brackets. Actuators available separate-

ly, see page H-56-57. Hardware available separately,

see Technical Data section of this catalog.

J2 LEVER

PANEL MOUNTING

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–54

C&K 9000 Series

Power Rocker and Lever Handle Switches

ACTUATOR COLOR

ACTUATOR–PANEL MOUNT

ACTUATOR

J3 ROCKER

OPTION

CODE

ACTUATOR

COLOR

BLACK

WHITE

RED

Actuator finish: Matte. Other colors, custom

actuator markings and legends available,

consult Customer Service Center.

PANEL MOUNTING

NOTE: Actuators available separately, see

page H–56-57. Hardware: two each—mounting

screws, nuts, lockwashers and standoffs for

1/8 inch thick panel are supplied standard on

all switches with panel mounting brackets.

Hardware available separately, see Technical

Data section of this catalog.

ACTUATOR COLOR

ACTUATOR–REAR MOUNT

ACTUATOR

FRAME COLOR

J37 ROCKER WITH METAL FRAME

OPTION

CODE

ACTUATOR

COLOR

.313

(7,95)

BLACK

WHITE

RED

OPTION

CODE

FRAME COLOR

BLACK

Actuator finish: Matte. Frame finish: Gloss.

Other colors, custom actuator markings

and legends available, consult Customer

Service Center.

NOTE: Actuators & frames available separately,

see page H-56-57. Hardware: two each—mount-

ing screws, nuts, lockwashers and standoffs for

1/8 inch thick panel are supplied standard on all

switches with panel mounting brackets. Hardware

available separately, see Technical Data section of

this catalog.

PANEL

MOUNTING

Not available with AV2 termination.

TERMINATIONS

SOLDER LUG

PC THRU-HOLE

Z4 QUICK CONNECT

PC MOUNTING

9201 and 9221

NOTE: Only termination available with 9221 model. Must be ordered with

D seal option. Mating terminal standard Nema .187" quick connect.

9201 Only

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–55

C&K 9000 Series

Power Rocker and Lever Handle Switches

TERMINATIONS

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE

9201J1AV2QE2

Vertical Actuation

DPDT

Terminal Nos. Molded

On Side of Case

9201 Only

NOTE: Terminal bend radii and lead-in manufacturing option.

Terminal spacing greater than 3mm at all points.

CONTACT MATERIAL

RoHS

COMPLIANT *

CONTACT

MATERIAL

RoHS

COMPATIBLE *

TERMINAL

PLATING

OPTION

CODE

RATINGS

MODEL

1,2

2,5

6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.

10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC.

9201

SILVER

SILVER OR TIN

YES

POWER

3,4,0

9221

SILVER CADMIUM OXIDE

TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

NOTE: Any models supplied with Q contact material is RoHS compliant.

For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

END CONTACTS: Coin silver, silver plated.

CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.

END CONTACTS: Silver cadmium oxide.

9221 model must be ordered with Z4 terminations and D seal option.

All 9000 Series models meet international dimensional and electrical requirements.

CENTER CONTACTS: Copper alloy, silver plated.

Z4 TERMINALS ONLY: Copper alloy, tin plated.

Cadmium used for electrical contacts is acceptable for RoHS.

SEAL

EPOXY SEAL

NO EPOXY SEAL

Not available with 9221 model or Z4 terminations.

Must be ordered with 9221 model and Z4 termination.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–56

C&K 9000 Series

Power Rocker and Lever Handle Switches

AVAILABLE HARDWARE

Panel mounting hardware for rocker and lever handle switches is

available separately. Mounting hardware consists of two screws,

two nuts, two standoffs and two lockwashers per switch, and is

available for panel thicknesses of 1/16, 3/32 and 1/8 inch.

SCREW

PANEL THICKNESS

TYPICAL ASSEMBLY

See part numbers below.

STAND-OFF

LENGTH

STAND-OFF

LOCKWASHER

NUT

J1 & J2 actuators

PART NO.

761101000

761102000

761103000

PANEL THK.

1/16 IN. (1,59)

3/32 IN. (2,38)

1/8 IN. (3,18)

STANDOFF LENGTH

.295 (7,49)

.264 (6,71)

.233 (5,92)

J1 Actuator

J2 Actuator

J3, J37 Actuators

PART NO.

760501000 WHITE

760502263 BLACK

760503000 RED

PART NO.

776A01000 WHITE

776A02263 BLACK

776A03000 RED

766601000 WHITE

766602263 BLACK

766603000 RED

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

J37 Actuators

NOTE: Additional nuts, screws and lockwashers available separately,

see Technical Data section of this catalog.

Other colors available, consult Customer Service Center.

PART NO.

445400746 BLACK ENAMEL

445400747 WHITE ENAMEL

Material: Spring Steel

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–57

相关型号：