CCM03-3001R102 [ITT]
CCM03-3517;
| 型号： | CCM03-3001R102 |
| 厂家： | 
ITT Cannon |
| 描述： | CCM03-3517 |
| 文件： | 总8页 (文件大小：673K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CCM03 MK II
A new range of CCM03 connectors
have been developed to interface with
SIM/SAM cards as defined by GSM11-
11 and ENV1375-1. The connectors are
available with either hinged covers or
fixed covers and have been designed to
minimize the amount of space needed
for PCB mounting.
Construction
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay or gold over nickel
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Stainless steel
Moldings
Slide lock/metal cover
Mechanical Data
Features
Number of Contacts
6 or 8
Mechanical life, hinged cover
Mechanical life, fixed cover
Card insertion force
10,000 cycles min
50,000 cycles
Hinged cover: 1 N max
Fixed cover: 3 N max
Hinged Cover
• Available with 6 or 8 contacts, with or
without PCB locating pegs.
Card extraction force
Hinged cover: 1 N max
• Available with insulated card presence
switch.
Fixed cover: 0.80 N min / 3 N max
Contact force
Slide locking force
Vibration
0.25 N min / 0.50 N max
2 N min / 6 N max
Frequency 10 to 500 Hz. Acceleration 50m/s
• The cover springs open when
unlocked while the card is in place.
2
Duration 6 hours - amplitude 0,35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
2
Shock
• The cover can be replaced without
removing the connector from the PCB.
Contact Electrical Data
• Inspection slots allow an electrical test
to be made without opening the cover.
Insulation resistance
Resistance
1,000 MΩ min
100 mΩ max
Current rating
Dielectric strength
10 µA min / 1 A max
750 Vrms min
• The overall height of the connector is
only 2,5 mm. The amount of space
needed to mount the connector is just
29,65 mm x 17,2 mm.
Switch Electrical Data
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open
100 mΩ max
250 Vrms min
1 mA min / 10m A max
0.2 VA
Fixed Cover
• Available with 6 or 8 contacts.
• The overall height of the connector is
2,85 mm max. Only 25,5 mm x 17,2
mm of board space is required to
mount the connector.
Maximum power
Environmental Data
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
General
• With tape and reel packaging as stan-
dard, the connectors are designed to
be automatically pick-and-placed.
Damp heat
Salt mist
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Packaging
• The high temperature thermoplastic
moldings are suited for infrared and
convection soldering processes.
Quantity per reel, see table next page.
• By using an inlay finish in the contact
area the life of the precious metal is
extended by over 10 times that of
standard gold plating.
• Robustly formed printed circuit tails
allow a co-planarity of 0,05 mm to
be maintained.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
19
CCM03 MK II
Ordering Code
Part Number
Number of
Contacts
Cover
PCB Locating
Pegs
Quantity
per reel
Contact
Finish
Switch
lock
Card Presence
switch
CCM03-3001 R102
CCM03-3002 R102
CCM03-3003 R102
CCM03-3004 R102
CCM03-3009 R102
CCM03-3010 R102
CCM03-3011 R102
CCM03-3012 R102
CCM03-3013 R102
CCM03-3514 R122
6
6
8
8
6
6
8
8
6
6
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
Hinged
No
Yes
No
Yes
No
Yes
No
Yes
No
No
1000
1000
1000
1000
1000
1000
1000
1000
1000
1200
Inlay
Inlay
Inlay
Inlay
Gold
Gold
Gold
Gold
Gold
Inlay
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
No
No
No
Yes (insulated)
No
CCM03-3504 R122
CCM03-3505 R122
8
6
Fixed
Fixed
No
No
1200
1200
Inlay
Inlay
No
No
No
No
Dimensional Drawings
Hinged Cover CCM03 - 3001 (6 contacts)
MICROSIM CARD
3002 (6 contacts - PCB locating pegs)
3003 (8 contacts)
3004 (8 contacts - PCB locating pegs)
180˚max
Mated condition
3,81 3,81
0,7
25˚0'
SEE DETAIL A
29,65
25,5(REF.)
DETAIL A
5,65±0,2
13,8
R 1,9
3,5
2,45
1,25
0,8
Notes:
Slider locked
Bump
25,5(REF.)
Coplanarity of soldering surfaces: 0,05 mm
*Pegs: Height 0,7 mm and Ø 1 mm
Pick and place area
ø3,5
XX-XXX
Date Code area
3,81 3,8
R 1,9
PCB Layout
CCM03-3001 / 3002
CCM03-3003 / 3004
(Component side)
(Component side)
1,5
23,2
20,32
2x
1,5
Plastic outline
1,5
23,2
1,5
1,55
1,44
Plastic outline
0,8 x 1
Pad
Contact foot area
0,8 x 1
+00,1
5,5 2,5 5,5
1,2
ø
ø0,1
5,5 2,5 5,5
Pad
C5
C6
C7
C8
C1
C2
C3
C4
C5
C6
C7
C1
C2
C3
3,81 3,81
25,5
9,34
Prohibited area
Contact location according to
ENV1375-1 & GSM11-11
3,81 3,81
25,5
6,35
9,34
Prohibited area
Current location according to
ENV1375-1 & GSM11-11
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
20
CCM03 MK II Hinged Cover
Insulated Card Presence Switch
Dimensional Drawings
Hinged Cover CCM03 - 3013 (6 contacts + Card Presence Switch)
25,5 ±0,2
0,4
MICROSIM CARD
2,1
13,15
180˚max
Mated condition
3,81 3,81
0,7
25˚0'
25,5 (REF.)
SEE DETAIL A
29,65
DETAIL
insulated blade switch
DETAIL A
5,65 ±0,2
13,8
3,5
2,45
1,25
Plastic actuator
0,8
25,5 (REF.)
R 1,9
Slider locked
XX-XXX
Pick and place area
ø 3,5
3,8
3,81
Date Code area
R 1,9
Note: Coplanarity of soldering surfaces: 0,05 mm
PCB Layout
CCM03 - 3013 (6 contacts + Card Presence Switch)
(Component side)
Plastic outline
Contact foot area
0,8 x 1
1,5
23,2
1,5
1,55
5,5 2,5 5,5
Pad
C5
C6
C7
SW
C1
C2
C3
SW
3,81 3,81
25,5
9,34
Prohibited area
Contact location according to
ENV1375-1 & GSM11-11
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
21
CCM03 MK II Hinged Cover
Dimensional Drawings
Hinged Cover CCM03 - 3514 (6 contacts - with switch on metal lock)
25,5 ±0,2
0,4
Right lock switch terminal
2,1
13,15
MICROSIM CARD
180˚max
Left lock switch terminal
Mated condition
3,81 3,81
0,7
25˚0'
25,5 (REF.)
SEE DETAIL A
DETAIL A
on right lock switch terminal only
on contacts & left lock switch terminal
29,65
5,65 ±0,2
13,8
3,5
2,45
R 1,9
1,25
0,8
Slider locked
Bump
25,5 (REF.)
Pick and place area
ø3,5
XX-XXX
Date Code area
3,81 3,8
R 1,9
Note: Coplanarity of soldering surfaces: 0,05 mm
PCB Layout
CCM03 - 3514 (6 contacts - with switch on metal lock)
(Component side)
Plastic outline
1,5
23,2
1,5
Contact foot area
0,8 x 0,6
3,4 5,5
7,6
2,5 5,5
Pad
1,55
C5
C6
C7
C1
C2
C3
5,6
3,81 3,81
25,5
9,34
Prohibited area
Contact location according to
ENV1375-1 & GSM11-11
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
22
CCM03 MK II Fixed Cover
Dimensional Drawings
Fixed cover CCM03 - 3504 (8 contacts)
25,5 ±0,2
12,75
2,5
DETAIL
A
10,16
40˚0'
Mated condition
3,81 3,81
SEE DETAIL
A
3,45 (REF.)
9,75 (REF.)
25,5 (REF.)
0,8
25,5 (REF.)
2,65
12,1
30˚0'
25,5
B
0,15 min
Pick and place area
ø3,5
Card stop
+0,05
1,4 0
ø
A
A
XX-XXX
ø1,6
0,75
2,3
Date Code area
B
+0,05
1,4 0
12,9
21,55
Note: Coplanarity of soldering surfaces: 0,05 mm
PCB Layout
CCM03 - 3504
CCM03 - 3505
(Component side)
(Component side)
23,2
1,5
23,2
1,5
1,44
Plastic outline
1,5
1,5
1,44
1,4+00,05
2x
Plastic outline
Contact foot area
ø
1,4+00,05
2x
Contact foot area
0,8 x 1
ø
0,8 x 1
Pad
5,5
2,5 5,5
Pad
5,5
2,5 5,5
C5
C6
C7
C8
C1
C5
C6
C7
C1
C2
C3
C4
C2
C3
Prohibited area
3,81
3,81
6,35
Prohibited area
3,81
3,81
6,35
Contact location according to
ENV1375-1 & GSM11-11
ENV1375-1 & GSM11-11
25,5
25,5
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
23
CCM03 MK II with Auto Lock cover
A new range of CCM03 connectors
have been developed to interface with
SIM/SAM cards as defined by GSM11-
11 and ENV1375-1. The connectors are
available with a hinged metallic cover
and have been designed to provide an
easier open/lock function and side card
entry.
Construction
Contacts
Copper alloy
Gold over nickel
Tin lead (2µ min)
High temp. thermoplastic, UL94V-0
Stainless steel
Contacts finish
PC tail plating
Molding
Cover
Mechanical Data
Number of Contacts
Mechanical life
Contact force
Vibration
6
Features
10,000 cycles min
0.35 N min / 0.50 N max
Frequency 10 to 500 Hz. Acceleration 50m/s
Duration 6 hours - amplitude 0.35 mm
(0.014) Max electrical discontinuity 1µs
• Available with 6 cross contacts which
are designed to give a consistently
reliable normal force over the life of
the connector.
2
Contact Electrical Data
• The hinged metallic cover can auto-
matically lock by pressure.
Insulation resistance
Resistance
1,000 MΩ min
100 mΩ max
Current rating
Dielectric strength
10 µA min / 1 A max
750 Vrms min
• Side entry of the card ensures easier
positioning of the card into the con-
nector.
Switch Electrical Data
• Insulated blade switch version
available for detection card when
cover is closed.
Card detection switch
Contact resistance
Dielectric strength
Current rating
Normally open
100 mΩ max
250 Vrms min
1mA min / 10m A max
0.2 VA
• The molding is polarized so that the
cover can only be closed if the card is
correctly inserted.
Maximum power
Environmental Data
• Inspection slots allow an electrical test
to be made without opening the cover.
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
• With tape and reel packaging as
standard, the connectors are designed
to be automatically pick-and-placed.
Damp heat
Salt mist
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Ordering Code
• The moldings are made from high-
temperature thermoplastics suited to
infrared and convection soldering
processes.
Part Number
Number of
Cover
Card Presence
Switch
No
Yes (insulated)
No
Quantity
per reel
1300
1300
1300
Contacts
CCM03-3517
CCM03-3518
CCM03-3529
6
6
6
Side Hinged
Front Hinged
Front Hinged
• Robustly formed printed circuit tails
allow a coplanarity of 0,05 mm to
be maintained.
Packaging
5 reels per box.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
24
CCM03 MK II with Auto Lock cover
Dimensional Drawings
Hinged Cover CCM03 - 3517 (6 contacts)
24,6±0,2
12,05
0,25
LOCKED
UNLOCKED
5
DETAIL
A
4,9
1,3
2,2
1,8
LOCKED
UNLOCKED
DETAIL
A
1
29,6
24,6 (REF.)
Pick and place area
ø3,2
Date Code area
OPEN
OPEN
1,9
Manual
opening
Manual
closing
1
2
Card insertion
onto the base
Card withdrawal
from the base
2
1
xx-xxx
2
11,61
CARD INSERTION
CARD WITHDRAWAL
0,25
29,1
0,25
Note: Coplanarity of soldering surfaces: 0,05 mm
PCB Layout
CCM03 - 3517 (6 contacts)
(Component side)
22,1
Plastic outline
Contact foot area
1 x 1
1,5
1,5
Pad
1,25
5,5 2,5
5,5
C5
C6
C7
C1
C2
C3
2
16,1
11,1
2
Prohibited area
3,81 3,81
24,6
8,24
Contact location according to
ENV1375-1 & GSM 11-11
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
25
CCM03 MK II with Auto Lock cover
Dimensional Drawings
Hinged Cover CCM03 - 3518 (6 contacts and switch)
24,6±0,2
5,1
11,8
11,8
0,5
OPEN
UNLOCKED
LOCKED
UNLOCKED
Manual
opening
1
DETAIL
Insulated blade switch
A
Plastic actuator
Card withdrawal
from the base
2
LOCKED
SEE DETAIL
2,8
A
2
1
Blade switch
29,65
24,6 (REF.)
OPEN
OPEN
Pick and place area
ø3,2
Date Code area
Manual
closing
2
Card insertion
onto the base
1
4,4 3,2 4,4
0,95
Note: Coplanarity of soldering surfaces: 0,05 mm
PCB Layout
CCM03 - 3518 (6 contacts and switch)
CCM03-3529 (without switch) layout is similar except SW pads
CARD WITHDRAWAL
CARD INSERTION
(Component side)
22,1
Plastic outline
Contact foot area 1 x 1
1,5
1,5
1,7
Pad
5
5,5
2,5
5,5
C5
C1
C6
C7
SW
C2
C3
SW
3,81
3,81
7,24
Contact location according to
24,6
ENV1375-1 & GSM 11-11
Prohibited area
Unless otherwise stated, tolerances are 0,10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com
26
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明