CCM04-1221 [ITT]
PCB Connector;
| 型号： | CCM04-1221 |
| 厂家： | 
ITT Cannon |
| 描述： | PCB Connector PC |
| 文件： | 总6页 (文件大小：313K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CCM04 MKII
The CCM04 without card guidance is
used where space is at a premium and
the card guidance can be built around
the connector (rather than provided by
the connector itself).
Construction
Contacts
Plating
Copper alloy
Contact area : Gold alloy inlay
Terminals : Tin lead (2µ min)
High temp. thermoplastic UL 94V-0 rated
Moldings
The CCM04 low profile without card
guidance is dedicated to applications
where the overall height of the
connector is paramount. A range of low
profile CCM04 connectors are available
with 1.25 mm thick moldings.
Mechanical data
Number of Contacts
Mechanical life
Durability of inlay
Contact force
6, 8 or 16
50,000 cycles min
5,000 cycles min (see note 1)
0.25 N min / 0.5 N max
Card detection switch
actuation force
0.8 N max for actuation (end travel switch
actuates when card is 0.9 mm from
card stop) 1.8 N max for complete
depression
The wide choice of contact
configurations and molding heights suit
a broad range of applications.
Vibration
50m/s2
Frequency 10 to 500 Hz. Acceleration
Duration 6 hours - amplitude 0.35 mm
Max electrical discontinuity 1µs
Peak value 500 m/s2 – Duration 11 ms
3 shocks in each direction of each axis
Max electrical discontinuity 1 µs
Features
• Available in a variety of molding heights
from 1.25 mm to 5 mm.
Shock
• The integrated card detection switch
(optional) is sealed against dust and grit.
Electrical data
• By using an inlay finish in the contact
area, the life of the precious metal is
extended by more than 10 times that
of standard gold plating.
Insulation resistance
Contact resistance max
Switching current
1,000 MΩ min
100 mΩ max
10 µA min / 1 A max
750 Vrms min
Normally open (closes on card insertion)
100mΩ max
Dielectric strength
• The height of the contact above the
insulator is 0.75 mm, so allowing a
wider tolerance for the card entry slot.
Card detection switch
Switch contact resistance
Dielectric switch contacts
Maximum switch power
250 Vrms min
0.2 VA
• The contact area is spooned to
reduce the risk of accidental (or
deliberate) damage, and to optimize
the electrical connection with the card.
Environmental data
Operating temperature
Soldering temperature
-40°C to +85°C
Temperature/time profile acc. to CECC00802
para. 6.1, Fig. 3 with peak temperature 250°C
IEC 512 test number 11c (10 days)
IEC 512 test number 11f (96 hours)
Sealed IP 54 For CCM04 1889 & 1905
Sealed against dust for other versions
• The tip of the contact is protected by
the molding so that it cannot catch on
the card as the card is being inserted.
Damp heat
Salt mist
Card detection switch
• The contact design ensures a
consistent and reliable contact force
over the life of the connector.
Note 1: Inlay (precious metal) rating is based on a very abrasive card being used and is
intended to represent worst case.
• Robustly formed printed circuit tails
are well protected by the insulator
body: a coplanarity of ± 0.05 mm is
guaranteed.
• The moldings are made from high
temperature thermoplastic suited for
infrared and convection soldering
processes.
• With tape and reel packaging as
standard, the connectors are designed
to be automatically picked & placed.
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
43
CCM04 MKII
Ordering code
Without Switch
2 x 3 contacts
With Switch
Molding Height
1.25 mm
1.25 mm
2.00 mm
2.75 mm
2.75 mm
3.50 mm
4.25 mm
5.00 mm
SMT Tails
2 x 4 contacts
CCM04-1814
CCM04-1813*
CCM04-1415*
CCM04-1217*
CCM04-1218
CCM04-1219*
CCM04-1220
CCM04-1221
2 x 4 contacts
2 x 8 contacts
Standard
Straight
CCM04-1801
CCM04-1800*
CCM04-5004**
CCM04-1200
CCM04-1201
CCM04-1202
CCM04-1203*
CCM04-1889
CCM04-1888*
CCM04-1905
Standard
Straight
CCM04-1316
CCM04-1317
CCM04-1318
CCM04-1319*
CCM04-1320
CCM04-1333*
CCM04-1334
Standard
Standard
Standard
Standard
*Note: On request
**Note: Replaced by CCM04-5102 (see page 53)
Packaging
Connectors without a switch are packaged in accordance with EIA 481-2 or IEC 286-3.
Connectors with a switch are packaged in accordance with EIA 481-3 or IEC 286-3
Standard packaging is in tape and reel. A modification code is added to the part number that indicates
reel packaging and the number of components per reel (which varies according to the molding height).
Example: A CCM04 with 8 contacts plus switch and a molding height of 3.50 mm has a part number
CCM04-1318-R751.
Without Switch
2 x 4
With Switch
Molding Height
SMT Tails
2 x 3
contacts
2 x 4
2 x 8
N° reels
per box
contacts
contacts
contacts
1.25 mm
1.25 mm
2.00 mm
2.75 mm
2.75 mm
3.50 mm
4.25 mm
5.00 mm
Standard
Straight
R182 (1800pcs)
R182 (1800pcs)
R122 (1200pcs)
R122 (1200pcs)
R122 (1200pcs)
R112 (1100pcs)
R951 (950pcs)
R132 (1300pcs)
R132 (1300pcs)
R901 (900pcs)
R901 (900pcs)
R901 (900pcs)
R801 (800pcs)
R701 (700pcs)
R651 (650pcs)
R102 (1000pcs)
R102 (1000pcs)
R651 (650pcs)
5
5
5
5
5
5
5
5
Standard
Straight
R801 (800pcs)
R801 (800pcs)
R751 (750pcs)
R651 (650pcs)
R601 (600pcs)
R451 (450pcs)
R451 (450pcs)
Standard
Standard
Standard
Standard
R = Reel
Reel Diameter
Reel Width
24.4 mm
X
Y
Z
360 mm
344 mm
350 mm
152
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
44
CCM04 MK II Low Profile
Dimensional Drawings
CCM04-1801 2 x 3 contacts
CCM04-1801 PCB Layout
CCM04-1814 PCB layout
CCM04-1814 2 x 4 contacts
CCM04-1889 2 x 4 contacts + switch
CCM04-1889 PCB Layout
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
45
CCM04 MK II Low Profile
Dimensional Drawings
CCM04-1905 2 x 8 contacts
PCB Layout
CCM04-1905
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
46
CCM04 MK II
Dimensional Drawings
CCM04-1200
2x3 contacts straight surface mount
CCM04-1200 PCB Layout
PCB Configuration 1
PCB Configuration 2
CCM04-1316 2 x 4 contacts straight surface mount
CCM04-1316 PCB Layout
PCB Configuration 1
CCM04-1218/1219/1220/1221/1415 2x4 contacts
CCM04-1218/1219/1220/1221/1415 PCB Layout
CCM04-1415
CCM04-1218
CCM04-1219
CCM04-1220
CCM04-1221
A = 2mm
A = 2.75
A = 3.50
A = 4.25
A = 5.00
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
47
CCM04 MK II
Dimensional Drawings
CCM04-1317/1318/1319/1320 2 x4 contacts plus switch
CCM04-1317/1318/1319/1320 PCB Layout
CCM04-1317
CCM04-1318
CCM04-1319
CCM04-1320
A = 2.75
A = 3.50
A = 4.25
A = 5.00
Unless otherwise stated, tolerances are ± 0.10 mm
CCM04-1334 2 x 8 contacts standard surface mount
CCM04-1334 PCB Layout
CCM04-5004/1201/1202/1203/1204
2x3 contacts standard surface mount
CCM04-5004*/1201/1202/1203/1204 PCB Layout
CCM04-5004*
CCM04-1201
CCM04-1202
CCM04-1203
CCM04-1204
A = 2.75
A = 3.50
A = 4.25
A = 5.00
*CCM04-5004 replaced by
CCM04-5102 (see page 53)
Unless otherwise stated, tolerances are ± 0.10 mm
Dimensions are shown in mm
Dimensions subject to change
www.ittcannon.com/ccm
48
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明