E108J1AV2B322 [ITT]

Sealed Miniature Rocker and Lever Handle Switches; 密封微型摇臂开关手柄


型号：	E108J1AV2B322
厂家：	ITT Cannon
描述：	Sealed Miniature Rocker and Lever Handle Switches 密封微型摇臂开关手柄开关
文件：	总14页 (文件大小：812K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

Features/Benefits

Typical Applications

• Telecommunications

• Instrumentation

• Sealed against solder and cleaning

process contaminants

• ESD Resistance—all actuator options

• Rocker, case & bushing UL 94V-0

• RoUS compliant

• Computers & peripherals

Models Available

Specifications

Materials

CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or

DC max. Q contact material (E1XX & E2XX Models): 7.5 AMPS

@125 V AC or 28 V DC; 3 AMPS @ 250 V AC. (E3XX Models):

5 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC.

See page H-37 for additional ratings.

CASE & BUSHING: Glass filled nylon 6/6, flame retardant, heat

stabilized (UL 94V-0).

ACTUATOR: Nylon, black standard, internal o-ring seal standard

with all actuators.

FRAME: Spring steel, black standard.

ELECTRICAL LIFE: E1XX and E2XX models: 40,000 make-and-break

cycles at full load. E3XX models: 30,000 cycles.

SWITCH SUPPORT: Brass or steel, matte-tin plated.

ACTUATOR PIVOT & MOUNTING BRACKET: Nylon.

ACTUATOR PIVOT RETAINER: Stainless steel.

CONTACT RESISTANCE: Below 10 m Ω typ. initial @

2-4 V DC, 100 mA, for both silver and gold plated contacts.

CONTACTS & TERMINALS: B contact material: Copper alloy, with gold

plate over nickel plate. Q contact material: Copper alloy, silver

plated. See page H-37 for additional contact materials.

INSULATION RESISTANCE: 10 Ω min.

ELECTROSTATIC DISCHARGE (ESD) OPTION: All actuator

options: 15,000 V DC max. @ sea level, actuator to terminals.

TERMINAL SEAL: Epoxy.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 85ºC.

HARDWARE: Nut, Screw & Lockwasher: Stainless steel.

Standoff: Nylon standard, aluminum available, consult Customer

Service Center.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant. For

the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown and

described on pages H-26 through H-39. For additional options not shown in catalog, consult Customer Service Center. All

models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

E101 SP On-None-On

E103 SP On-Off-On

Contact Material

Actuator

J1 .531 long rocker

J2 Lever

J3 .906" long rocker

J11 Rocker with frame

J21 Lever with frame

J50 .362" long rocker

J60 Lever

Gold

Terminations

E105 SP Mom.-Off-Mom.

E107 SP On-Off-Mom.

E108 SP On-None-Mom.

E201 DP On-None-On

E203 DP On-Off-On

E205 DP Mom.-Off-Mom.

E207 DP On-Off-Mom.

E208 DP On-None-Mom.

E211 DP On-On-On

Gold, tin-lead

Gold, matte tin

Silver

Right angle, PC thru-hole

AV2 Vertical right angle, PC thru-hole

PC Thru-hole

Solder lug

M Silver, tin-lead

Silver, matte-tin

Gold over silver

Gold over silver, tin-lead

Gold over silver, matte-tin

A3 Right angle, snap-in, PC thru-hole

AV3 Vertical right angle, snap-in, PC thru-hole

V3 .460" high, V-bracket

V4 .630" high, V-bracket

V5 Vertical right angle, PC thru-hole

V6 .460" high, V-bracket

V7 .630" high, V-bracket

V8 .953" high, V-bracket

V21 .555" high, V-bracket, snap-in

V31 .460" high, V-bracket, snap-in

J90 Lever

Seal

E213 DP On-On-Mom.

E215 DP Mom.-On-Mom.

E301 3P On-None-On

Epoxy

Actuator Color

Black

Red

Frame Color

Black

NONE No frame color required

Metal Frame Color

(J11, J21 Actuators)

Black

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–26

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

SWITCH FUNCTION

POS. 2 POS. 3

CONNECTED TERMINALS

POS. 1

POS. 2

POS. 3

NO.

POLES

MODEL

NO.

C&K marking on opposite side

N/A

SCHEMATIC

E101

NONE

OFF

E103

E105

E107

E108

MOM.

OFF

MOM.

2-3

OPEN

N/A

2-1

OFF

NONE

SPDT

Terminal Nos.

For Reference Only

Part number shown: E101J1ZBE2

E201

E203

E205

NONE

OFF

NONE

N/A

OPEN

N/A

MOM.

E207

2-3,5-6

2-1,5-4

E208

E211**

E213**

E215**

MOM.

2-3,5-4

DPDT

MOM.

DPDT

Terminal Nos.

For Reference Only

Part number shown: E201J1ZBE2

MOM. = Momentary

** Wiring for 3-way switch, Hardware available seperately, see Technical Data section of this catalog.

All models

with all options when ordered with G, L, M or Q contact material.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–27

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

SWITCH FUNCTION

POS. 2 POS. 3

CONNECTED TERMINALS

POS. 1

POS. 2

POS. 3

NO.

POLES

MODEL

NO.

C&K marking on opposite side

SCHEMATIC

NONE

2-3,5-6,8-9

N/A

2-1,5-4,8-7

E301

3PDT

Terminal Nos.

For Reference Only

Part number shown: E301J1ZBE2

MOM. = Momentary

All models

with all options when ordered with G, L, M or Q contact material.

** Wiring for 3-way switch, see Technical Data section of this catalog.

ACTUATOR COLOR

ACTUATOR–PANEL REAR MOUNT

ACTUATOR

OPTION

CODE

ACTUATOR

COLOR

J1 LEVER

BLACK

RED

Finish: Matte. Other colors, custom actuator mark-

ings and legends available, consult Customer

Service Center.

NOTE: Hardware: two each—mounting screws,

nuts, lockwashers and standoffs for 1/8 inch thick

panel are supplied standard on switches with panel

mounting bracket. Internal o-ring actuator seal

standard. Actuators available separately, see

page H-37. Hardware available seperately, see

Technical Data section of this catalog. J1, J2 actua-

tors available with C, Z or Z3 terminations.

J2 LEVER

PANEL MOUNTING

J1 & J2 Actuators

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–28

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

ACTUATOR COLOR

ACTUATOR–REAR MOUNT

ACTUATOR

FRAME COLOR

J11 ROCKER WITH FRAME

OPTION

CODE

ACTUATOR

COLOR

BLACK

RED

OPTION

CODE

FRAME COLOR

BLACK

NOTE: This option has reduced anti-static capability.

J21 LEVER WITH FRAME

Actuator finish: Matte, frame finish: gloss.

Other colors, custom actuator markings

and legends available, consult Customer

Service Center.

NOTE: Internal o-ring actuator seal standard.

Actuators & frames available separately, see

page H-37. Hardware available seperately, see

Technical Data section of this catalog. N. J11

& J21 actuators available with C, Z & Z3 ter-

minations.

PANEL MOUNTING

NOTE: This option has reduced anti-static capability.

ACTUATOR COLOR

ACTUATOR–PC MOUNT

ACTUATOR

J1 ROCKER

OPTION

CODE

ACTUATOR

COLOR

BLACK

RED

Finish: Matte. Other colors, custom actuator

markings and legends available, consult

Customer Service Center.

J2 LEVER

NOTE: Hardware: two each—mounting

screws, nuts, lockwashers and standoffs for

1/8 inch thick panel are supplied standard on

switches with panel mounting bracket. Internal

o-ring actuator seal standard. Actuators

available separately, see page H-37. Hardware

available seperately, see Technical Data sec-

tion of this catalog. J1, J2 actuators available

with A, A3, AV2, AV3, V2-V61 terminations.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–29

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

ACTUATOR COLOR

ACTUATOR–PC MOUNT

ACTUATOR

J3 ROCKER

OPTION

CODE

ACTUATOR

COLOR

BLACK

RED

J50 ROCKER

Finish: Matte. Other colors, custom actuator

markings and legends available, consult

Customer Service Center.

NOTE: Hardware: two each—mounting screws,

nuts, lockwashers and standoffs for 1/8 inch

thick panel are supplied standard on switches

with panel mounting bracket. Internal o-ring

actuator seal standard. Actuators available

separately, see page H-37. Hardware available

seperately, see Technical Data section of this

catalog.

J60 LEVER

J3 actuators available with AV2, AV3

& V2-V61 terminations. Some permissible actua-

tor/termination combinations may lack clearance

between actuator and PC board, and care must

be exercised to accommodate this condition.

J50, J60 & J90 actuators available with

A, AV2, AV3, V2 – V61 terminations.

J90 LEVER

TERMINATIONS

SOLDER LUG

PC THRU-HOLE

PC MOUNTING

Not available with K, L, P, S, & R or M contact

materials. Available actuators, see page H-37.

SPDT thru 3PDT

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–30

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

TERMINATIONS

Z3 QUICK CONNECT

Not available with K, L, P, S, & R or M contact materials. Available

actuators, see pages H-28 thru H-30. Mating quick connector

available; order part number 530100000, page H-38.

SPDT thru 3PDT

RIGHT ANGLE, PC THRU-HOLE

E101J1ABE2

Horizontal Actuation

Actuator Shown In Pos. 1

SECTION A-A

SPDT

PC MOUNTING

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

NOTE: Not available with J3, J50, J60 and J90 actuators.

Available actuators, see pages H-28 thru H-30.

Terminal bend radii and lead-in manufacturing option.

NOTE: PC mounting pattern must clear

switch support leg.

RIGHT ANGLE, PC THRU-HOLE

E201J1ABE2

Actuator Shown In Pos. 1

Horizontal Actuation

SECTION A-A

DPDT

PC MOUNTING

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

NOTE: Not available with J3 actuator.

Available actuators, see pages H-28 and H-30.

Terminal bend radii and lead-in manufacturing option.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–31

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

TERMINATIONS

RIGHT ANGLE, PC THRU-HOLE

E301J1ABE2

Horizontal Actuation

3PDT

Actuator Shown In Pos. 1

SECTION A-A

PC MOUNTING

NOTE: Terminal bend radii and lead-in manufacturing option.

Available actuators, see pages H-28 and H-30.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E101J1AV2BE2

Vertical Actuation

Actuator Shown In Pos. 1

SECTION A-A

SPDT

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

.150" PITCH

PC MOUNTING

NOTE: Terminal bend radii and lead-in manufacturing option.

Available actuators, see pages H-28 and H-30.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–32

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

TERMINATIONS

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E201J1AV2BE2

Vertical Actuation

SECTION A-A

DPDT

Actuator Shown In Pos. 1

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

PC MOUNTING

.150" PITCH

NOTE: Terminal bend radii and lead-in manufacturing option.

Available actuators, see pages H-28 and H-30.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E301J1AV2BE2

Vertical Actuation

SECTION A-A

3PDT

Actuator Shown In Pos. 1

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

.150" PITCH

PC MOUNTING

NOTE: Terminal bend radii and lead-in manufacturing option.

Available actuators, see pages H-28 and H-30.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–33

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

TERMINATIONS

V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

PC MOUNTING

E101J1V5BE2

Vertical Actuation

Actuator Shown In Pos. 1

SECTION A-A

SPDT

NOTE: Terminal bend radii and lead-in manufacturing option.

Available actuators, see pages H-28 and H-30.

V5 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

PC MOUNTING

E201J1V5BE2

Vertical Actuation

SECTION A-A

DPDT

Actuator Shown In Pos. 1

NOTE: Terminal bend radii and lead-in manufacturing option.

Available actuators, see pages H-28 and H-30.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–34

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

TERMINATIONS

V6, V7, V8 VERTICAL MOUNT, V-BRACKET

PC MOUNTING

V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN

OPTION

CODE

DIM ‘A’

E101J1__BE2

V21

.555 (14, 10)

.460 (11, 68)

.630 (16, 00)

.953 (24, 21)

SPDT

NOTE: Available actuators, see pages H-28 and H-30.

V6, V7, V8 VERTICAL MOUNT, V-BRACKET

V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

OPTION

CODE

DIM ‘A’

V21

.555 (14, 10)

.460 (11, 68)

.630 (16, 00)

.953 (24, 21)

E201J1__BE2

DPDT

NOTE: Available actuators, see pages H-28 and H-30.

V7, V8 VERTICAL MOUNT, V-BRACKET

V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

OPTION

CODE

DIM ‘A’

E301J1__BE2

V21

.555 (14, 10)

.630 (16, 00)

.953 (24, 21)

3PDT

NOTE: Available actuators, see pages H-28 and H-30.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–35

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

TERMINATIONS

V3, V4 VERTICAL MOUNT, V-BRACKET

V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

E101J1__BE2

SPDT

OPTION

CODE

DIM ‘A’

V3, V31

.460 (11,68)

.630 (16,00)

NOTE: Available actuators, see pages H-28 and H-30.

V3, V4 VERTICAL MOUNT, V-BRACKET

V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

E201J1__BE2

DPDT

OPTION

CODE

DIM ‘A’

V3, V31

.460 (11,68)

.630 (16,00)

NOTE: Available actuators, see pages H-28 and H-30.

V4 VERTICAL MOUNT, V-BRACKET

VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

E301J1__BE2

3PDT

OPTION

CODE

DIM ‘A’

.630 (16,00)

V41

NOTE: Available actuators, see pages H-28 and H-30.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–36

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

CONTACT MATERIAL

RoHS

COMPLIANT *

RoHS

COMPATIBLE *

OPTION

CODE

CONTACT

MATERIAL

TERMINAL

PLATING

RATINGS

GOLD

YES

LOW LEVEL/

DRY CIRCUIT

GOLD

TIN-LEAD

0.4 VA MAX. @ 20 V AC OR DC MAX.

MATTE-TIN

YES

SILVER

E1XX & E2XX MODELS: 7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @

250 V AC.

E3XX MODELS: 5 AMPS @ 125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.

4,5

TIN-LEAD

SILVER

POWER

MATTE-TIN

YES

GOLD

E1XX AND E2XX MODELS: 0.4 VA MAX @20 V AC OR DC MAX. OR

7.5 AMPS @125 V AC OR 28 V DC; 3 AMPS @ 250 V AC.

DC E3XX MODELS: 0.4 VA MAX. @ 20 V AC OR DC MAX. OR 5 AMPS @

125 V AC OR 28 V DC; 2 AMPS @ 250 V AC.

GOLD OVER

LOW LEVEL/DRY

TIN-LEAD

2,3

SILVER

CIRCUIT OR POWER

YES

MATTE-TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

END CONTACTS: Coin silver, with gold plate over nickel plate.

NOTE: Any models supplied with Q, B, G, S P & R contact material are RoHS compliant.

For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate.

All models

with all options when ordered with G, L, M, Q, S & R contact material.

B contact material standard with all terminations.

END CONTACTS: Coin silver, silver plated.

K, L , M, P R & S contact materials not available with Z terminations.

CENTER CONTACT & ALL TERMINALS: Copper alloy, with gold flash over silver

plate. Or copper alloy, silver plated.

TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.

TERMINALS: Copper alloy, with matte-tin over nickel plate.

SEAL

EPOXY SEAL

AVAILABLE HARDWARE

J2, J21 Actuators

J3 Actuator

J1, J11 Actuators

PART NO.

760502263 BLACK

760503000 RED

766602263 BLACK

766603000 RED

776A02263 BLACK

776A03000 RED

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

J90 Actuator

J50 Actuator

J60 Actuator

PART NO.

598002263 BLACK

598003000 RED

775A02263 BLACK

775A03000 RED

613802263 BLACK

598103000 RED

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

Material: Nylon

Finish: Matte

NOTE: Additional nuts, screws and lockwashers available separately, see Technical

Data section of this catalog. Other colors available, consult Customer Service Center.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–37

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

AVAILABLE HARDWARE

Fits Z3 Termination

female connector

Frame for J11, J21 Actuators

J50, J60 & J90 Actuators

MATTE

GLOSS

PART NO.

486702000

PART NO.

764500746 BLACK ENAMEL

764601106 RETAINING SPRING

486802000 BLACK

PART NO.

Material: Nylon

Finish: Matte or Gloss

Material: Spring Steel

530100000

Available in loose pieces.

NOTE: Additional nuts, screws and lockwashers available separately, see Technical

Data section of this catalog. Other colors available, consult Customer Service Center.

TYPICAL APPLICATION

Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC

mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame.

Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.

J1 & J2 Actuators

.047” (1,19) PANEL THK.

PART NO.

.062” (1,57) PANEL THK.

PART NO.

.090” (2,29) PANEL THK.

PART NO.

.125” (3,18) PANEL THK.

PART NO.

452902263

452903000

452702263

452703000

452802263

452803000

452602263 BLACK

452603000 RED

J50, J60 & J90 Actuators

.047” (1,19) PANEL THK.

PART NO.

.062” (1,57) PANEL THK.

PART NO.

.090” (2,29) PANEL THK.

PART NO.

.125” (3,18) PANEL THK.

PART NO.

432502263

432503000

432602263

432603000

432702263

432703000

432802263 BLACK

432803000 RED

PANEL MOUNTING

For part numbers

4529xxxxx, 4527xxxxx,

4528xxxxx, 4526xxxxx

For part numbers

4325xxxxx, 4326xxxxx

For part numbers

4327xxxxx, 4328xxxxx

.005 R. MAX.

(0,13) TYP.

.005 R.

(0,13)

MAX. TYP.

.005 R.

(0,13)

MAX. TYP.

.495 – .505

(12,57 – 12,83)

.495 – .505

(12,57 – 12,83)

.495 – .505

(12,57 – 12,83)

.797 – .803

(20,24 – 20,40)

.595 – .605

(15,11 – 15,37)

.620 – .625

(15,75 – 15,88)

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–38

C&K E Series

Sealed Miniature Rocker and Lever Handle Switches

AVAILABLE HARDWARE

Panel Inserts

Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for

indicator light assembly. Order insert separately from frame. Blank insert panel (without hole

for LED) also available. LED not included.

Will fit separate snap-in frames for

J50, J60, J90 actuators.

PANEL INSERT

BLANK PANEL INSERT

WITH HOLE FOR LED

WITHOUT HOLE FOR LED

PART NO.

894902000

894903000

476602000 BLACK

476603000 RED

Special colors, custom markings available, consult Customer Service Center.

Dimensions are shown: Inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

H–39

E108J1AV2B322 [ITT]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E