E225MD3V6BE [ITT]

Pushbutton Switch, DPDT, On-(on), Momentary, 0.02A, 20VDC, 10 PCB Hole Cnt, Solder Terminal, Through Hole-straight, ROHS COMPLIANT;


型号：	E225MD3V6BE
厂家：	ITT Cannon
描述：	Pushbutton Switch, DPDT, On-(on), Momentary, 0.02A, 20VDC, 10 PCB Hole Cnt, Solder Terminal, Through Hole-straight, ROHS COMPLIANT 开关 PC 光电二极管按钮开关
文件：	总8页 (文件大小：969K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

Features/Benefits

Typical Applications

• Process sealed with disposable

• Instrumentation

splashproof boot

• Telecommunications and

• Long life contact design

networking equipment

• Snap-fitting plunger available

• RoHS compliant models available

• Computers and peripherals

Models Available

Specifications

Materials

CONTACT RATING: B contact material (EX25 Models): 0.4 VA max.

@ 20 V AC or DC max. G contact material (EX21 Models): 1 AMP

@120 V AC or 28 V DC or 0.4 VA max. @ 20 V AC or DC max.

Note: Break-before-make contacts. Multi-pole contacts

do not make and break simultaneously. See page A-24 for

additional ratings.

CASE & BUSHING: Glass filled nylon 6/6, flame retardant

(UL 94V-0).

PLUNGER: Glass filled nylon or glass filled polyester (PBT)

(UL 94V-0).

SWITCH SUPPORT: Brass or steel, matte-tin.

SWITCH SUPPORT RETAINER: Stainless steel.

ELECTRICAL LIFE: 60,000 make-and-break cycles at full load.

N.O. & N.C. CONTACTS: EX25 MODELS: B contact material: Copper

alloy, with gold plate over nickel plate. EX21 MODELS: G contact

material: Coin silver, with gold plate over nickel plate. See page

A-28 for additional contact materials.

CONTACT RESISTANCE: Below 50 mΩ typ. initial @

2–4 V DC, 100 mA, for both silver and gold plated contacts.

INSULATION RESISTANCE: 10 Ω min.

DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level.

OPERATING TEMPERATURE: –30ºC to 75ºC.

COMMON CONTACTS & ALL TERMINALS: Copper alloy, with

gold plate over nickel plate. See page A-24 for additional

contact materials.

CAP INSTALLATION FORCE: 10 lbs. max. permissible.

SOLDERABILITY: Per MIL-STD-202F method 208D, or

EIA RS-186E method 9 (1 hour steam aging).

TERMINAL SEAL: Epoxy.

DISPOSABLE BOOT: Vinyl splashproof boot supplied standard.

Remove and discard only after soldering and cleaning

processes are complete.

NOTE: Any models supplied with P, R, B or G contact material are RoHS compliant. For

the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

NOTE: Specifications and materials listed above are for switches with standard options.

For information on specific and custom switches, consult Customer Service Center.

Build-A-Switch

To order, simply select desired option from each category and place in the appropriate box. Available options are shown

and described on pages A-20 thru A-26. For additional options not shown in catalog, consult our Customer Service Center.

All models are process sealed to withstand machine soldering temperatures and pressure wash cleaning methods.

Switch Function

E121 SPDT On-Mom. 1 Amp

E221 DPDT On-Mom. 1 Amp

E125 SPDT On-Mom. 0.4VA

E225 DPDT On-Mom. 0.4VA

Plunger

.282" high

.331" high, snap-fitting

Bushing

D1 Unthreaded

D3 .180" high, unthreaded

S1 .332" high

Terminations

Right angle, PC thru-hole

AV2 Vertical right angle, PC thru-hole

PC Thru-hole

Contact Material

Gold

Gold, tin-lead

Gold, matte-tin

Gold over silver

Gold over silver, tin-lead

Gold over silver, matte-tin

A3 Right angle, snap-in, PC thru-hole

AV3 Vertical right angle, snap-in, PC thru-hole

V3 .460" high, V-bracket

V4 .630" high, V-bracket

V6 .460" high, V-bracket

V8 .953" high, V-bracket

Seal

Epoxy and disposable

splashproof boot

V31 .460" high, snap-in V-bracket

V41 .630" high, snap-in V-bracket

V61 .460" high, snap-in V-bracket

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–19

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

SWITCH FUNCTION

POS. 1 POS. 2

CONNECTED TERMINALS

POS. 1

POS. 2

NO.

POLES

MODEL

NO.

C&K marking this side

SCHEMATIC

E121

E125

MOM.

1-3

1-2

SPDT

Terminal Nos.

For Reference Only

Part number shown: E121SD1CGE

E221

MOM.

1-3,4-6

1-2,4-5

E225

DPDT

Terminal Nos.

For Reference Only

Part number shown: E221SD1CBE

MOM. = Momentary

EX25 models must be ordered with B, K or P contact material.

EX21 models must be ordered with G, L or R contact material.

E121, E221 models

with all options

when ordered with G, L or R contact material.

PLUNGER

.282" HIGH

S1 .332" HIGH

.332" HIGH SNAP-FITTING

Not Available with D1 bushing.

NOTE: Caps available for all plunger options, see page A-25.

BUSHING

D1 UNTHREADED

D3 .180" HIGH UNTHREADED

Not available with S1 actuator.

Third Angle

Projection

NOTE: Disposable splashproof vinyl over actuator and bushing supplied std., see page A-24.

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–24

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

TERMINATIONS

PC THRU-HOLE

PC MOUNTING

SPDT and DPDT

RIGHT ANGLE, PC THRU-HOLE

E121SD1AGE

SPDT

SECTION A-A

PC MOUNTING

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

NOTE: Terminal bend radii and lead-in manufacturing option.

RIGHT ANGLE, PC THRU-HOLE

E221SD1AGE

DPDT

SECTION A-A

A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE

PC MOUNTING

NOTE: Terminal bend radii and lead-in manufacturing option.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–21

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

TERMINATIONS

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E121SD1AV2GE

SPDT

SECTION A-A

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

.150" PITCH

PC MOUNTING

NOTE: Terminal bend radii and lead-in manufacturing option.

AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE,

.150" PITCH

E221SD1AV2GE

DPDT

SECTION A-A

AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,

.150" PITCH

PC MOUNTING

NOTE: Terminal bend radii and lead-in manufacturing option.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–22

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

TERMINATIONS

V3, V4 VERTICAL MOUNT, V-BRACKET

V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

Dim 'A'

E121SD3__GE

SPDT

SNAP-IN

OPTION

CODE

DIM ‘A’

V3, V31

V4, V41

.460 (11,68)

.630 (16,00)

V3, V4 VERTICAL MOUNT, V-BRACKET

V31, V41 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

E221SD3__GE

DPDT

Dim 'A'

OPTION

CODE

SNAP-IN

DIM ‘A’

V3, V31

V4, V41

.460 (11,68)

.630 (16,00)

V6, V8 VERTICAL MOUNT, V-BRACKET

V61, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN

.122 DIA.

PC MOUNTING

.192

(4,88)

.060 MAX.

(1,53)

C&K MARKING ON

OPPOSITE SIDE

E121SD3V__GE

SPDT

.180

(4,57)

DIM ’A’

OPTION

CODE

DIM ‘A’

NO NC

.185

(4,70)

.050

(1,27)

V6, V61

V8, V81

.460 (11,68)

.953 (24,21)

.020 TYP.

(0,51)

.030 X .050 TYP.

(0,76) (1,27)

.250

(6,35)

.185 TYP.

(4,70)

.360

(9,14)

.750

(19,05)

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–23

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

TERMINATIONS

V6, V8 VERTICAL MOUNT, V-BRACKET

V61, V81 VERTICAL MOUNT, V-BRACKET, SNAP-IN

PC MOUNTING

Dim 'A'

SNAP-IN

OPTION

CODE

E221SD3V6GE

DPDT

DIM ‘A’

V6, V61

V8, V81

.460 (11,68)

.953 (24,21)

CONTACT MATERIAL

OPTION

CODE

RoHS

CONTACT

MATERIAL

TERMINAL

PLATING

COMPLIANT * COMPATIBLE *

RATINGS

GOLD

YES

EX25 MODELS ONLY: 0.4 VA MAX.

@ 20 V AC OR DC MAX.

LOW LEVEL/DRY CIRCUIT

TIN-LEAD

GOLD

MATTE-TIN

YES

GOLD

GOLD OVER

EX21 MODELS ONLY: 0.4 VA MAX @ 20 V AC OR

DC MAX. OR 1 AMP @ 120 V AC OR 28 V DC.

2,3

TIN-LEAD

LOW LEVEL/DRY CIRCUIT OR POWER

SILVER

YES

MATTE-TIN

* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.

NOTE: Any models supplied with P, R, B or G contact material are RoHS compliant. For the

latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.

CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.

N.O. AND N.C. CONTACTS: Coin silver, with gold plate over nickel plate.

E121, E221 models

with all options when ordered with mandatory

COMMON CONTACTS & ALL TERMINALS: Copper alloy, with gold plate

over nickel plate.

G, R or L contact material.

P, B or K contact material must be ordered with EX25 models.

R, G or L contact material must be ordered with EX21 models.

TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.

TERMINALS: Copper alloy, with matte-tin alloy over nickel plate.

SEAL

EPOXY SEAL AND DISPOSABLE SPLASHPROOF BOOT

Disposable splashproof boot supplied standard.

Remove and discard boot only after soldering and

cleaning processes are complete.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–24

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

AVAILABLE HARDWARE

Cap

.200 DIA.

(5,08 )

.120

(3,05)

.155

(3,94)

PART NO.

708901000 WHITE

708902000 BLACK

708903000 RED

752701000 WHITE

752702000 BLACK

752703000 RED

801801000 WHITE

801802000 BLACK

801803000 RED

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Cap, Snap-fitting plunger

Cap

PART NO.

894001000 WHITE

894002000 BLACK

894003000 RED

894101000 WHITE

894102000 BLACK

894103000 RED

484601000 WHITE

484602000 BLACK

484603000 RED

798201000 WHITE

798202263 BLACK

798203000 RED

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Gloss

Material: Nylon

Finish: Matte

NOTE: Other cap colors available, consult Customer Service Center.

TYPICAL APPLICATION

Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC

mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and

frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.

.047" (1,19) PANEL THK.

.062" (1,57) PANEL THK.

.090" (2,29) PANEL THK.

.125" (3,18) PANEL THK.

PART NO.

432501000

432502263

432503000

432601000

432602263

432603000

432701000

432702263

432703000

432801000 WHITE

432802263 BLACK

432803000 RED

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–25

C&K E020 Series

Sealed Snap-acting Momentary Pushbutton Switches

AVAILABLE HARDWARE

PANEL INSERTS

Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for

indicator light assembly. Order insert separately from frame. Blank insert panel (without hole

for LED) also available. LED not included.

PANEL INSERT

BLANK PANEL INSERT

WITH HOLE FOR LED

WITHOUT HOLE FOR LED

PART NO.

894901000

894902000

894903000

476601000 WHITE

476602000 BLACK

476603000 RED

Special colors, custom markings available, consult Customer Service Center.

Third Angle

Projection

Dimensions are shown: Inches (mm)

Specifications and dimensions subject to change

www.ittcannon.com

A–26

E225MD3V6BE [ITT]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E