KPT02B9-36PXDN_技术文档

KPT/KPSE

C O N N E C T O R S

KP-6/898

KPT/KPSE

Miniature circular connectors

Contents

Introduction

Introduction............................................................. 2

Standard Data........................................................ 3

Series KPT............................................................. 4

Series KPSE........................................................... 6

Contact arrangements............................................ 9

The miniature circular connectors series KPT and

KPSE from ITT Cannon are manufactured acc. to

MIL-C-26482 with three point bayonet coupling and

five-keyway polarization.They offer general purpose

solder connectors and high performance crimp

connectors. The broad product range provides the

most complete familiy of connectors conform to MIL-

C-26482, NFC 93422 HE 301 model, VG 95328 and

LN 29500 specifications.

Wall mounting receptacles....................................13

Cable connecting plugs...........................................14

Box mounting receptacles......................................15

Thru-bulkhead receptacles....................................15

Straight plugs.......................................................16

Jam nut receptacles.............................................17

Right angle plugs.................................................18

The versatility of these connectors has been proven

by their usage in general as well as in high per-

formance environmental applications.

Special versions

Connectors with grounding continuity.................19

Receptacles with straight solder pins................. 22

In addition to the basic series presented in this

catalogue, connectors for special applications are

available. They include corrosion resistant types,

filter connectors for electromagnetic compatability

and non-outgasing, radiation resistant versions.

Panel cutouts........................................................ 24

Dummy receptacle.............................................. 25

Protective caps..................................................... 26

Tools ..................................................................... 27

Assembly instructions ........................................ 28

Cross reference lists ........................................... 29

All connectors conform to the above mentioned

specifications are fully intermateable and accept a

wide range of interchangeable accessories. Thereby

design modifications can be achieved more easily

and at lower cost with connectors of the KPT/KPSE

series.

Product safety information................................... 31

2

Subject to changes

KPT/KPSE

Technical Data

Material and Finishes

Miniature circular connectors

KPT

KPSE

Shell

Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416

Insulator

Polychloroprene

Grommet and Seal

Contacts

Polychloroprene

Copper alloy, gold plated

Polychloroprene

Copper alloy, gold plated

Mechanical Data

Shell styles

00 – Wall mounting receptacle

01 – Cable connecting plug

02 – Box mounting receptacle

07 – Jam nut receptacle

08 – Plug with 90 termination assemblies

B – Thru-bulkhead receptacle (KPT only)

°

06 – Straight plug

Shell sizes

8 thru 24

Polarisation/Coupling

Service classes

five keyways/three point bayonet

A – General duty

B – General duty with strain relief

E – Grommet seal

G – Gland seal for jacketed cable

J – Gland nut with strain relief for jacketed cable

P – for potting

E – Grommet seal

Water tightness

F – Grommet seal with strain relief

see also pages 5 and 8

Acc. to VG 95319 Part 2, Test No. 5.9.2

For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only

Test pressure 0,2 bar overpressure Test duration 48 h

Test temperature 25

– 55 / 125

±

3

°C

The connector shall be free of moisture

Operating temperature

Durability

Vibration

°C

min. 500 mating cycles

200 m/s²at 10 to 2000 Hz

Electrical Data

Number of contacts

Wire size AWG

Contact termination

2 thru 61

16 thru 24

Solder

3 thru 61

12 thru 24

Crimp

Contact rating

Size AWG

20

Rated current A

7,5

Test current A

7,5

Millivolt drop mV

less than 55

16

22,0

13,0

less than 50

Insulation resistance

Service rating

5000 MW

Test voltage

Sea level

Service class

Vrms

1500

2300

375

VDC

2100

3200

535

With scoop proof connectors

operating voltages

acc. to MIL-C-26482 and

VG 96912 are

1

2

1

2

Exception

Service rating between the

central contact and the housing

of the coaxial contact

21336 m

(70 000 ft.)

550

770

permitted

Operating voltage

Service class

VG 95328

MIL-C-26482

1

2

140 VDC/100 VAC

165 VDC/115 VAC

850 VDC/600 VAC

1400 VDC/1000 VAC

Operating voltage and connector usage

Connectors are equipment which must not be separated or mated when used as per determination. As acc. to

specification the connectors are suitable for an operating voltage of 50 V (see Product Safety Information).

However, this is only valid when the connectors are free accessible during operation and consequently might

be touchable. When the connectors will be operated with line voltage, ITT Cannon offers a solution, too. Please

consult factory.

3

KPT/KPSE

Miniature circular connectors

KPT General purpose solder contact connectors

ꢀ

General purpose

Solder termination

Closed entry socket contacts

Series KPT from ITT Cannon offers general purpose

connectors, qualified for use in military applications

but also widely used in industrial applications calling

for a circular connector with fixed contacts for solder

termination.

The KPT series is MIL-C-26482 approved and is

intermateable with all connectors acc. to the above

mentioned specifications.

4

Subject to changes

KPT/KPSE

Miniature circular connectors

KPT General purpose solder contact connectors

How to order*

*

KPT 02 E 22 - 36 P W

Series Prefix

KPT – ITT Cannon Prefix

Shell style

ITT Cannon designation

00 – wall mounting receptacle

01 – cable connecting plug

02 – box mounting receptacle (class E only), not with

contact arrangement 14A4

06 – straight plug

07 – jam nut receptacle (hermetic version also available)

08 – 90° angle plug

B

– thru-bulkhead receptacle (class E only)

Class

A – general duty with intermediate endbell

B – general duty with strain relief

(may be used for potting)

E – with a grommet seal, not for 02 and 3112 (MS Spec)

F – grommet seal with strain relief (MS Spec)

G – gland seal for jacketed cable

J – watertight gland seal with strain relief

for jacketed cable

P – for potting (MS Spec)

Shell sizes

8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangement

see page 9 – 11

Contact type

P – pin

S – socket

Alternate insert position

W, X, Y and Z (omit for normal)

see page 12

Modification code

DN – Shrink boot adapter for shell styles 00, 01, 06 and 07

DZ – Endbell for shielding braids and shrink boots.

Class E will always be used for these modifications.

Consult factory for other modifications. Omit first digit (0) of shell style

indication when using a modification code.

*Note:

The above mentioned order reference explanation refers only to the ITT Cannon

ordering system. For other order references according to a specification, please

consult the cross reference list on pages 29 – 30.

5

KPT/KPSE

Miniature circular connectors

KPSE High performance crimp contact connectors

ꢀ

High performance

Crimp termination

Closed entry socket contacts

Series KPSE environmental, miniature circular, quick

disconnect connectors are designed for the exacting

requirements of today`s electronic industry.

They are intermateable, intermountable and

interchangeable with all connectors manufactured

acc. to MIL-C-26482, LN 29500, VG 95328, NFC

93422 HE 301 and NFL 54125.

Connectors of ITT Cannon series KPSE have

obtained the VDE Expertise No. 63761.

4

Contact retaining clip

is completely encased in a tough plastic wafer to protect

the clip from damage.

1

2

Standard MIL-C-26482 or NFL 54 125 Hardware

mates with any connector designed to MIL-C-26 482,

LN 29500 or NF L 54 125 or NF C 93 422, HE 301

model

Complete moisture sealing

is achieved by combining four seals: shell, peripheral,

interfacial and wire seals.

Crimp, snap-in contacts

are designed to MIL-C-23216 and can be crimped with

the standard M22520/1 crimp tool.

SHELL SEAL

CLOSED-ENTRY SOCKET CONTACTS

eliminate damage from abuse by test probes and help

to correct any misaligned pins during engagement.

is effected when the plug shell pushes against the

sealing ring in the receptacle when the connectors are

mated.

CONTACT INSERTION

PERIPHERAL SEAL

is accomplished from the rear of the connector. When

the contact is fully inserted, the clip tines snap securely

behind the contact shoulder.

around the edge of the pin insulator is designed so that

mating the connector puts tension on the seal and

greatly reduces compression set.

CONTACT EXTRACTION

INTERFACIAL SEAL

is accomplished with a front-inserted extraction tool.

Pressing the tool plunger pushes the contact out

through the rear of the connector.

is achieved by the insulator faces meeting when the

plug and receptacle are mated.

WIRE SEAL

is accomplished by a multiple ripple design, exceeding

the wire sealing requirements of MIL-C-26482.

3

Monobloc insulator

does not leave any access to moisture and avoids

interfacial empty space.

5

Positive insert-to-shell mechanical retention

with hard plastic wafer firmly locked into a groove in

the shell, in addition to a strong adhesive bond between

the insert and shell.

6

Subject to changes

KPT/KPSE

Miniature circular connectors

KPSE High performance crimp contact connectors

How to order acc. to VG 95328

VG 95328 A 18 - 1 S N

Specification

Shell style

A – wall mouting receptacle with straight endbell

B – wall mounting receptacle with cable clamp

C – box mounting receptacle

D – jam nut receptacle

E – jam nut receptacle with cable clamp

J – straight plug with adapter DN

K – straight plug with cable clamp

M– straight plug, version DZ

N – straight plug

R – wall mounting receptacle, version DZ

S – jam nut receptacle with adapter DN

T – jam nut receptacle, version DZ

Shell size

8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangement

see pages 9 – 11

Contact type

P – pin

S – socket

Alternate insert position

see page 12

7

KPT/KPSE

Miniature circular connectors

KPSE High performance crimp contact connectors

How to order

KPSE 00 E 18 - 32 P X *

Series prefix

KPSE – ITT Cannon prefix

MS – MIL-C-26482 prefix

Shell style

ITT Cannon designation

00 – wall mounting receptacle

01 – cable connecting plug

02 – box mounting receptacle

06 – straight plug

07 – jam nut receptacle

08 – 90° angle plug

Class

A – general duty (not MS approved)

B – general duty with strain relief (not MS approved)

E – grommet seal (MS specification)

F – grommet seal with strain relief (MS specification)

G – gland seal for jacketed cable

J – gland seal with strain relief for jacketed cable

(not MS approved)

P – for potting (MS specification)

Shell style

8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangement

see pages 9 – 11

Contact type

P – pin

S – socket

Alternate insert position

W, X, Y and Z (omit for normal), see page 12

Modification code

DN – Shrink boot adapter for shell styles 00, 01, 06 and 07

DZ – Endbell for shielding braids and shrink boots.

Class E will always be used for these modifications.

Consult factory for other modifications. Omit first digit (0) of shell style

indication when using a modification code.

*Note:

The above mentioned order reference explanation refers only to the ITT Cannon

ordering system. For other order references according to a specification, please

consult the cross reference list on pages 29 – 30.

8

Subject to changes

KPT/KPSE

Miniature circular connectors

Contact Arrangements

No. of

Contact

Service

rating

Insulator position

Insulator weight (g)

contacts

arrangement

Contact size

AWG

W

X

Y

-

Z

-

including contacts

pin socket

2

3

8-2 ꢀ᭝

20

1

58

60

90

122

210

-

8-3 ꢀ᭝

20

-

8-3A ᭝᭹᭛᭢

20

-

8-33 ꢀ᭛᭝

-

16S

4

8-4 ꢀ᭝

16S

1

2

1

45

90

-

6

10-6 ᭹᭝᭛᭢

20

-

3

12-3 ꢀ᭹᭛᭝᭢

16

-

180

270

-

10

12-10 ꢀ᭹᭛᭝᭢

60

155

295

20

5

14-5 ꢀ᭝

16

2

1

40

43

92

90

184

-

273

-

12

14-12 ꢀ᭝

20 (8)

16 (4)

Legende

ꢀ KPT ꢀ ᭛ KPSE ᭢ LN29500 ꢀ᭝ authorized per MIL-C-26482 ꢀ ᭹ authorized per VG95328

9

KPT/KPSE

Miniature circular connectors

Contact Arrangements

No. of

contacts

Contact

Service

rating

Insulator position

Insulator weight (g)

including contacts

arrangement

Contact size

AWG

W

X

Y

Z

pin socket

15

19

5

14-15 ꢀ᭹᭛᭝᭢

20

1

2

1

17

110

155

124

14-19 ꢀ᭹᭛᭝᭢

20

30

165

315

-

14-22ꢀ᭹

12 (1)

20 (4)

-

4

14A4

ꢀ

-

Coax RG188U

8

16-8 ꢀ᭹᭛᭝

16

54

158

152

270

180

331

23

16-23 ꢀ᭹᭛

20 (22)

-

16 (1)

26

11

16-26 ꢀ᭹᭛᭝

20

1

2

60

62

-

275

241

338

340

18-11 ꢀ᭹᭛᭝᭢

119

16

32

18-32 ꢀ᭹᭛᭝᭢

1

85

138

222

265

20

Legende

ꢀ KPT ꢀ ᭛ KPSE ᭢ LN29500 ꢀ᭝ authorized per MIL-C-26482 ꢀ ᭹ authorized per VG95328

10

Subject to changes

KPT/KPSE

Miniature circular connectors

Contact Arrangements

No. of

contacts

Contact

Service

rating

Insulator position

Insulator weight (g)

including contacts

arrangement

Contact size

AWG

W

X

Y

Z

pin socket

16

5

20-16 ꢀ᭹᭛᭝᭢

16

2

1

2

238

318

333

347

20A6

12

᭛

ꢀ

90

70

63

45

16

180

145

114

126

135

270

215

252

225

175

-

24

39

41

21

20-24

290

333

-

20

20-39 ꢀ᭹᭛᭝

20 (37)

16 (2)

20-41 ꢀ᭹᭛᭝᭢

20

22-21 ꢀ᭹᭛᭝

349

16

36

41

55

22-36 ꢀ᭹

20

1

72

39

30

144

135

142

216

264

226

288

22-41 ꢀ᭹᭛᭝᭢

20 (27)

16 (14)

1

2

-

22-55 ꢀ᭹᭛᭝᭢

1

314

20

Legende

ꢀ KPT ꢀ ᭛ KPSE ᭢ LN29500 ꢀ᭝ authorized per MIL-C-26482 ꢀ ᭹ authorized per VG95328

11

KPT/KPSE

Miniature circular connectors

Contact arrangements

No. of

contacts

Contact

Service

rating

Insulator position

Insulator weight (g)

including contacts

arrangement

Contact size

AWG

W

X

Y

Z

socket

61

24-61 ꢀ᭹᭛᭝

1

90

180

270

324

20

Alternate Insert Position

Shell

size

Nbr. of

contacts

2

3

8-4

6

3

10

4

5

12

15

19

8

23

26

11

32

5

16

24

39

41

21

36

41

55

61

Contact

arr.

Degree of rotation

V

-

45

-

W

58

60

90

-

X

Y

-

Z

-

The diagram indicates alternate insert positions. The

six positions N, V, W, Y, Z differ in degree of rotation

for various sizes and arrangements. For the exact

degree of rotation, for the list of contact arrange-

ments and for alternate positions available, refer to

the table at the right.

8

8-2

122

8-3

8-3A

8-33

-

10-6

12-3

210

-

--

-

4

10

12

90

-

--

-

295

-

180

270

-

12-10

14A4

14-22

14-5

14-15

14-19

16-8

16-23

16-26

18-11

18-32

20A6*

20-16

20-24

20-39

20-41

22-21

22-36

22-41

22-55

24-61

60

-

155

-

14

-

40

43

17

30

54

158

60

62

85

90

238

70

63

45

16

72

39

30

90

92

90

110

165

52

270

-

119

138

180

318

145

114

126

135

144

135

142

180

184

-

273

-

155

315

180

-

234

-

331

-

338

340

265

-

347

290

333

-

349

288

-

314

324

16

275

241

222

270

333

215

252

225

175

216

264

226

270

18

20

22

24

* This contact arrangement features five contacts size 12. Four are standard contacts and one is a first-to-mate contact.

12

Subject to changes

KPT/KPSE

Miniature circular connectors

Wall mounting receptacles

KPT00/MS3110 KPSE00/MS3120

Solder

Crimp

KPT00/MS3110

KPSE00/MS3120

Without termination assembly

KPT/KPSE

KPT

Shell

size*

ꢀ8

Ø A

L

Q

K

±

M

R

S

T

±

Z

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

max.

21,6

26,8

Thread Type 2A

7/16-28UNEF

9/16-24UNEF

11/16-24UNEF

13/16-20UNEF

15/16-20UNEF

1- 1/16-18UNEF

1- 3/16-18UNEF

1- 5/16-18UNEF

1- 7/16-18UNEF

0,25

±

0,15

±0,15

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

0,15

max.

12,3

10,8

10,0

13,5

16,5

17,3

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

3,05

3,75

10

12

14

16

18

20

22

24

With termination assemblies

Type

A

Typ A

B_A

Typ B and F

B_BF

Shell

size*

ꢀ8

D_A

L_A

V

C

D_BF

min.

6,0

G_BF

min.

2,9

4,5

7,7

H_BF

L_BF

max.

15,0

18,2

21,2

24,6

27,7

30,9

33,9

37,1

40,3

min.

8,5

max.

38,0

43,1

Thread Type 2A

1/2-28UNEF

5/8-24UNEF

3/4-20UNEF

7/8-20UNEF

max.

14,0

17,2

20,4

23,6

26,7

29,5

32,7

35,9

Thread

6-32

8-32

max.

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

max.

45,1

48,2

50,0

10

12

14

16

18

20

22

24

11,8

15,0

17,9

21,1

24,1

26,5

30,4

32,8

7,5

10,7

13,9

15,5

19,6

23,6

25,2

9,3

1 -20UNEF

12,4

15,6

18,8

20,1

1-3/16-18UNEF

1-7/16-18UNEF

39,0

Type E

B_E

Type P

B_P

max.

Mod. DN or F 185

D2

Shell

size*

ꢀ8

L_E

D_P

min.

8,3

L_P

L1

L2

±0,5

max.

14,2

17,2

20,4

23,4

26,6

29,6

32,8

36,0

39,2

max.

32,5

34,5

max.

36,9

42,2

43,9

-0,5

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

max.

35,0

37,0

42,0

15,3

17,6

21,6

24,3

27,6

31,0

34,3

37,1

40,5

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

11,3

14,2

17,3

20,5

23,1

26,3

29,4

32,6

* See page 5, 7 and 8 for ordering number information

ꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

13

KPT/KPSE

Miniature circular connectors

Cable connecting plugs

KPT01/MS3111 KPSE01/MS3121

Solder

Crimp

KPT01/MS3111

KPSE01/MS3121

Without termination assembly

KPT/KPSE

KPT

Shell

size*

ꢀ8

Ø A

K

±

L

M

Q

S

Ø Y

Z

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

0,25

max.

21,5

26,8

±

0,15

Thread Type 2A

7/16-28UNEF

9/16-24UNEF

11/16-24UNEF

13/16-20UNEF

15/16-20UNEF

1- 1/16-18UNEF

1- 3/16-18UNEF

1- 5/16-18UNEF

1- 7/16-18UNEF

max.

18,5

23,0

29,0

29,5

32,0

35,0

38,5

42,0

46,0

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

max.

12,3

10,8

10,0

13,5

16,5

17,5

11,6

14,25

15,1

10

12

14

16

18

20

22

24

With termination assemblies

Type

A

Typ A

Type B and F

Shell

size*

ꢀ8

B_A

D_A

min.

8,5

L_A

V

B_BF

C

D_BF

min.

6,0

G_BF

min.

2,9

4,5

7,7

H_BF

L_BF

max.

15,0

18,2

21,2

24,6

27,7

30,9

33,9

37,1

40,3

max.

38,0

43,1

Thread Type 2A

1/2-28UNEF

5/8-24UNEF

3/4-20UNEF

7/8-20UNEF

max.

14,0

17,2

20,4

23,6

26,7

29,5

32,7

35,9

39,0

Thread

6-32

8-32

max.

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

max.

46,0

49,0

51,1

10

12

14

16

18

20

22

24

11,8

15,0

17,9

21,1

24,1

26,5

30,4

32,8

7,5

10,7

13,9

15,5

19,6

23,6

25,2

9,3

1 -20UNEF

12,4

15,6

18,8

20,1

1-3/16-18UNEF

1-7/16-18UNEF

Type E

B_E

Type P

B_P

Mod. DN or F 185

D2

Shell

size*

ꢀ8

L_E

D_P

min.

8,3

L_P

L1

L2

0,5

max.

14,2

17,2

20,4

23,4

26,6

29,6

32,8

36,0

39,2

max.

32,5

34,5

max.

15,3

17,6

21,6

24,3

27,6

31,0

34,3

37,1

40,5

max.

36,9

42,2

43,9

-0,5

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

max.

35,0

37,0

42,0

±

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

11,3

14,2

17,3

20,5

23,1

26,3

29,4

32,6

* See page 5, 7 and 8 for ordering number information

ꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

14

Subject to changes

KPT/KPSE

Miniature circular connectors

Box mounting receptacles

KPT02/MS3112 KPSE02/MS3122

Solder

Crimp

KPT02/MS3112

KPSE02/MS3122

Without termination assemblies

KPT/KPSE

KPT

Shell

size*

ꢀ8

Ø A

L

N

K

±

M

R

S

T

±

Z

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

max.

21,1

22,7

max.

11,1

14,3

17,5

20,6

23,8

27,0

30,2

33,4

36,5

0,25

±

0,15

±0,15

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

0,15

max.

12,3

10,8

10,0

13,5

16,5

17,3

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

3,05

3,75

10

12

14

16

18

20

22

24

* See page 5, 7 and 8 for ordering number information ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

Thru-bulkhead receptacles

KPTB/MS3119

Receptacle assembly

Shell

size*

ꢀ8

Ø A

K

±

L

M

T

R

S

X

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

0,5

max.

28,6

31,9

±

0,25

max.

6,0

9,2

8,0

±0,15

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

±0,15

16,1

20,1

14,5

17,7

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

3,05

3,75

10

12

14

16

18

20

22

24

* See page 5, 7 and 8 for ordering number information ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

15

KPT/KPSE

Miniature circular connectors

Straight plugs

KPT06/MS3116 KPSE06/MS3126

Solder

KPT06/MS3116

Crimp

KPSE06/MS3126

Without termination assemblies

KPT/KPSE

G

KPT

Z

Thread Type 2A

7/16-28UNEF

Shell

size*

ꢀ8

J L

Q Thread

max.

21,4

25,1

max.

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

±0,15

max.

16,3

15,0

9,1

10

12

14

16

18

20

22

24

9/16-24UNEF

11/16-24UNEF

13/16-20UNEF

15/16-20UNEF

1- 1/16-18UNEF

1- 3/16-18UNEF

1- 5/16-18UNEF

1- 7/16-18UNEF

9,1

10,7

25,1

With termination assemblies

Type

A

Type

B

or

F

Type A

B_A

Typ B and F

B_BF

Shell

size*

ꢀ8

D_A

L_A

V

C

D_BF

min.

6,0

G_BF

min.

2,9

4,5

7,7

H_BF

L_BF

max.

15,0

18,2

21,2

24,6

27,7

30,9

33,9

37,1

40,3

min.

8,5

max.

42,0

45,0

Thread Type 2A

1/2-28UNEF

5/8-24UNEF

3/4-20UNEF

7/8-20UNEF

1 -20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

max.

14,0

17,2

20,4

23,6

26,7

29,5

32,7

35,9

Thread

6-32

8-32

max.

19,3

20,8

24,4

27,2

28,7

35,3

39,9

43,2

max.

46,0

49,0

10

12

14

16

18

20

22

24

11,8

15,0

17,9

21,1

24,1

26,5

30,4

32,8

7,5

10,7

13,9

15,5

19,6

23,6

25,2

9,3

12,4

15,6

18,8

20,1

39,0

Type E

B_E

Type P

B_P

Mod. DN or F 185

D2

Shell

size*

ꢀ8

L_E

max.

D_P

min.

8,3

L_P

L1

L2

0,5

max.

14,2

17,2

20,4

23,4

26,6

29,6

32,8

36,0

39,2

max.

15,3

17,6

21,6

24,3

27,6

31,0

34,3

37,1

40,5

max.

36,9

42,2

43,9

-0,5

15,6

18,4

23,7

24,5

29,8

32,0

36,1

38,5

41,6

max.

35,0

37,0

42,0

±

32,5

34,5

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

11,3

14,2

17,3

20,5

23,1

26,3

29,4

32,6

* See page 5, 7 and 8 for ordering number information

ꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

16

Subject to changes

KPT/KPSE

Miniature circular connectors

Jam nut receptacle

KPT07/MS3114 KPSE07/MS3124

Solder

Crimp

KPT07/MS3114 Type A

KPSE07/MS3124

Without termination assemblies

KPT/KPSE

KPT

Shell

size*

ꢀ8

A

F

±

H

K

M

R

S

T Panel thickness

Ø Y

Z

+0,03 -0,13

12,0

15,0

19,05

22,23

25,40

28,58

31,75

34,93

38,10

0,15

±

0,15

±0,25

±

0,15

Thread Type 2A

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

1 -20UNEF

1- 1/8-18UNEF

1- 1/4-18UNEF

1- 3/8-18UNEF

1- 1/2-18UNEF

1- 5/8-18UNEF

±0,5

min.

1,6

max.

3,5

6,5

max.

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

max.

7,9

4,7

3,8

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

24,0

27,0

32,0

35,0

38,5

41,5

46,0

49,5

52,5

10

12

14

16

18

20

22

24

* See page 5, 7 and 8 for ordering number information ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

With termination assemblies

Type B or F

Type E

Modification

DN or F 185

Type B and F

B_BF

max.

18,2

21,5

24,6

27,8

31,0

34,1

38,1

Type E

L_BF

Type DN

L_E

Shell

size*

ꢀ8

D_BF

min.

6,0

G_BF

min.

2,9

4,5

7,7

H_BF

B_E

L₁

L₂

0,5

D₂

max.

19,3

20,8

24,2

27,2

28,7

35,3

39,8

43,2

max.

44,9

48,4

50,3

max.

18,2

21,5

24,6

27,8

31,0

34,1

38,1

41,3

44,5

max.

33,5

39,0

max.

43,0

45,5

52,6

51,6

±

max.

15,6

18,4

23,7

24,7

29,8

32,0

36,1

28,5

41,6

12,2

14,5

15,8

14,9

10

12

14

16

18

20

22

24

7,5

10,7

13,9

15,5

19,6

23,6

25,2

9,3

12,4

15,6

18,8

20,1

41,3

44,5

* See page 5, 7 and 8 for ordering number information

ꢀin series KPSE only contact arrangements 8-3A and 8-33 available

17

KPT/KPSE

Miniature circular connectors

Right angle plug, 90

°

KPT08 KPSE08

Solder

Crimp

KPT08

KPSE08

Without termination assemblies

KPT/KPSE

G

KPT

Z

Shell

size*

ꢀ8

J

L

Q

max.

19,8

23,6

26,5

30,1

33,2

35,4

39,0

42,1

45,2

±

0,15

9,1

max.

21,4

25,1

Thread Type 2A

7/16-28UNEF

9/16-24UNEF

11/16-24UNEF

13/16-20UNEF

15/16-20UNEF

1- 1/16-18UNEF

1- 3/16-18UNEF

1- 5/16-18UNEF

1- 7/16-18UNEF

max.

16,3

15,0

10

12

14

16

18

20

22

24

10,7

* See page 5, 7 and 8 for ordering number information ꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

With termination assemblies

Typ A or E

Type B or F

Typ A and E

B_AE

max.

15,6

18,9

21,2

24,8

27,7

31,4

34,7

Type B and F

B_BF

Shell

size*

ꢀ8

L_AE

D_AE

V

D_BF

L_BF

max.

36,1

38,3

40,9

41,6

42,5

44,7

48,3

52,1

max.

20,9

21,7

23,3

24,9

26,5

28,1

29,6

31,7

33,6

Thread Type 2A

1/2-28UNEF

5/8-24UNEF

3/4-20UNEF

7/8-20UNEF

1 -20UNEF

1-3/16-18UNEF

1-7/16-18UNEF

max.

15,6

18,9

21,2

24,8

27,7

31,4

34,7

36,9

41,1

max.

31,4

32,2

35,4

38,6

40,2

41,8

43,4

47,9

49,9

max.

36,1

38,3

40,9

41,6

42,5

44,7

48,3

52,1

10

12

14

16

18

20

22

24

36,9

41,1

* See page 5, 7 and 8 for ordering number information ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

18

Subject to changes

KPT/KPSE

Miniature circular connectors

Special versions with grounding continuity

These connectors are designed to ensure electrical

continuity

ꢀ

at the cable shielding level

(to protect it against radio frequency

intererences)

ꢀ

at the grounding level

(if it is connected to the shielding).

The plugs are manufactured with grounding fingers

soldered to the front face of the shell. They make

contact with the inner side of the receptacle shell.

Plug and receptacle feature a special endbell which

supports the cable shielding. The connectors are in

accordance with the VG 95328 specification.

Receptacle with grounding continuity (for shielded cable)

KPT/KPSE 0E ... DZ

Shell

size*

ꢀ8

A

B

min.

6,6

C

D

E

K

±

L

M

R

S

ØT

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

+0,5

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

max.

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

1,00

15,0

17,0

18,0

0,25

max.

52,0

53,0

58,0

±0,15

±

0,15

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

±0,15

13,5

16,5

17,3

11,6

14,25

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,7

34,9

3,05

3,75

10

12

14

16

18

20

22

24

9,2

12,2

15,2

18,3

20,0

23,0

26,0

28,8

* See pages 5 and 8 for ordering number information

ꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

19

KPT/KPSE

Miniature circular connectors

Cable connecting plug with grounding continuity (for shielding cable)

KPT/KPSE 1E ... DZ

Shell

size*

ꢀ8

A

B

min.

6,6

C

D

E

±

K

±

L

M

S

Ø Y

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

+0,50

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

max.

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

1,0

0,25

max.

52,0

53,0

58,0

±0,15

max.

18,5

23,0

29,0

29,5

32,0

35,0

38,5

42,0

46,0

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

15,0

17,0

18,0

13,5

16,5

17,5

11,6

14,25

15,10

10

12

14

16

18

20

22

24

9,2

12,2

15,2

18,3

20,0

23,0

26,0

28,8

* See pages 5 and 8 for ordering number information ꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

Straight plug with grounding continuity

KPT/KPSE6E.DZ

Shell

size*

ꢀ8

A

min.

6,6

B

C

D

E

L

max.

S

±

+0,50

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

max.

19,1

22,0

26,2

29,4

32,8

35,4

39,0

42,1

45,2

max.

20,0

15,0

26,0

30,0

33,0

36,0

40,0

43,0

46,0

±1,0

0,2

15,0

17,0

18,0

48,0

49,0

53,0

17,0

19,0

23,0

26,0

29,0

33,0

35,0

39,0

42,0

10

12

14

16

18

20

22

24

9,2

12,2

15,2

18,3

20,0

23,0

26,0

28,8

* See pages 5 and 8 for ordering number information ꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

20

Subject to changes

KPT/KPSE

Miniature circular connectors

Jam nut receptacle with grounding continuity (for shielded cable)

KPT/KPSE 7E ... DZ

Shell-

size

ꢀ8

Ø A

min.

6,6

Ø B

Ø C

max.

18,2

21,4

24,6

27,8

30,9

34,1

38,1

41,3

44,4

D

E

1,0

L

S

±

T

±

+0,5

16,0

18,0

22,0

25,0

28,0

32,0

34,0

38,0

41,0

max.

13,3

16,1

20,0

22,2

26,2

28,5

32,5

34,8

37,9

max.

47,0

49,0

50,0

55,0

0,25

15,0

17,0

18,0

23,0

27,0

31,7

34,9

38,1

41,3

46,0

49,2

52,3

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

10

12

14

16

18

20

22

24

9,2

12,2

15,2

18,3

20,0

23,0

26,0

28,8

* See pages 5 and 8 for ordering number information

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

Assembly of a connector with a ground continuity endbell

KPT/KPSE ... DZ

Shell

size*

± A

max.

± B

max.

ꢀ8

6,6

8,0

10

12

14

16

18

20

22

24

9,2

10,0

14,0

17,0

20,0

24,0

27,0

30,0

33,0

12,2

152

18,3

20,0

23,0

26,0

28,8

* See pages 5 and 8 for ordering number information

ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀin series KPSE only contact arrangements 8-3A and 8-33 available

21

KPT/KPSE

Miniature circular connectors

Receptacles with straight solder pins

How to order

KPT

2

E

22

-

36

P

W

*

Series

KPT – ITT Cannon designation

Shell type

ITT Cannon designation

2 – box mounting receptacle (only class E),

not layout 14 A 4

7 – jam nut receptacle

(hermetic version also available)

Class

A – general duty (shell type 7 only)

E – with grommet seal, not for 02 and

3112 (MS-Spezification), only shell type 2

Shell size

8, 10, 12, 14, 16, 18, 20, 22 und 24

Contact arrangements

see page 9 – 11

Contact type

P – pin

S – socket

Alternate insert position

W, X, Y and Z (omit for normal position)

see page 12

Modification

EW – solder pin 0,6 x 7 mm

EX – solder pin 0,76 x 7 mm

22

Subject to changes

KPT/KPSE

Miniature circular connectors

Box mounting receptacle

KPT 2* P/S** ^.***

Shell

size

8

10

12

14

16

18

20

A

K

L

M

N

R

S

Ø T

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

±0,25

max.

21,1

22,7

±

0,15

max.

11,10

14,30

17,50

20,60

23,80

27,00

30,20

33,40

36,50

±0,15

max.

21,00

24,20

26,60

29,00

31,30

33,70

36,90

40,10

43,30

±0,15

13,50

16,50

17,30

11,60

14,25

15,10

18,30

20,60

23,00

24,60

27,00

29,40

31,70

34,90

3,05

3,75

22

24

Order ref. see page 22

Jam nut receptacle

KPT 7* P/S** ^.***

S

size*

8

hell

A

F

±

H

K

±

M

R

S

Panel thickness

Y

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

0,15

±

0,15

0,25

±

0,15

Thread Type 2 A

9/16-24UNEF

11/16-24UNEF

7/8-20UNEF

±0,5

min.

1,6

max.

28,0

31,0

36,0

39,0

42,0

45,0

50,0

55,0

57,0

13,3

16,5

20,6

23,8

26,9

30,1

33,3

36,5

39,6

19,0

22,2

27,0

30,2

33,3

36,5

39,7

42,9

46,0

3,2

4,0

17,7

22,5

23,3

24,0

27,0

32,0

35,0

38,5

41,5

46,0

49,5

52,5

10

12

14

16

18

20

22

24

1- 20UNEF

1- 1/8-18UNEF

1- 1/4-18UNEF

1- 3/8-18UNEF

1- 1/2-18UNEF

1- 5/8-18UNEF

Order ref. see page 22

23

KPT/KPSE

Miniature circular connectors

Box and wall mounting receptacle

Panel cutouts

Shell size

for rear mounting

for front mounting

D +0,25 / -0

14

17

22

25

28

31

34,5

37,5

41

D +0,25 / -0

12,7

16

R ±0,15

8

10

12

14

16

18

20

22

24

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

19

22,2

25,5

28,5

31,7

35

38

Mounting hole diameter

Shell size

KPT/KPSE

T +0,3

3,1

P - Panel thickness

screw head height included

8

10

12

14

16

18

20

22

24

2,2

5,4

3,1

3,6

front mounting

rear mounting

Jam nut receptacle

Shell

size

KPT/KPSE

A +0,25

-0

B +0

-0,12

8

10

12

14

16

18

20

22

24

14,5

17,7

22,7

25,7

28,8

32

35,1

38,4

41,5

13,6

16,8

20,9

24,1

27,2

30,4

33,6

36,8

40

24

Subject to changes

KPT/KPSE

Miniature circular connectors

How to order

Dummy receptacles

KPT

MS

15 -

3115 - 10

8

A

Series

Dummy receptacle

Shell size

Flange

A-Standard

Shell size

A

K

M

R

S

Ø T

+0,03 -0,13

12,00

15,00

19,05

22,23

25,40

28,58

31,75

34,93

38,10

±

0,4

±

0,15

±

0,15

max.

21,0

24,2

26,6

29,0

31,3

33,7

36,9

40,1

43,3

±

0,15

* 8 A

1,6

2,4

12,1

14,5

15,4

15,1

18,3

20,6

23,0

24,6

27,0

29,4

31,8

34,9

3,05

3,75

* 10 A

* 12 A

* 14 A

* 16 A

* 18 A

* 20 A

* 22 A

* 24 A

* Add KPT 15 or MS 3115 prefixes

25

KPT/KPSE

Miniature circular connectors

Protective caps

80 / 3180 – for plugs

cap with nylon cord D / preferred type

Material and finishes

Protective cap

Sash chain

Cord

Aluminum alloy

Stainless steel

Polyamide

Ring

Stainless steel

Clip

Aluminum alloy

Gasket

Fluor Silicone

Endlink / rivet

Bayonet pin

Finishes

Stainless steel, passivated

A34

Nickel

A66

Olive drab chromate over cadmium

How to order

KPT80 - 10 D - A34

MS3180 - 10

Series

KPT80 – for plug

KPT81 – for receptacle

81 / 3181 – for receptacles

cap with nylon cord D / preferred type

Shell size

8 – 24

Termination

D – Preferred type: with nylon cord and end link

clip and end link attached

C – sash chain

N – sash chain with ring (81 or 3181 only)

Modification

A34 – nickel plated

without code = A66 – oliv drab chromate over cadmium

VG95328 - Z2 C 10

VG Specification

Shell

A

L1

B

L2

H

N

size

max

max.

18,0

20,3

25,1

28,2

31.5

34,5

37,8

40,9

44,2

max.

76

89

101

Style

Z1 – for receptacle

Z2 – for plug

8

18,26

21,44

25,40

28,58

31,75

34,92

38,10

41,28

44,45

19,84

21,44

22,22

21,44

22,22

14,7

17,9

22,6

25,8

29,0

32,2

35,3

38,5

41,7

10

12

14

16

18

20

22

24

Termination

C – with nylon cord and end link

clip and end link attached

Shell size

8 – 24

Crimp tool for clips upon request

81 / 3181 – for receptacles

80 / 3180 – for plugs

cap with sash chain C or N

26

Subject to changes

KPT/KPSE

Miniature circular connectors

Tools and Accessories

Series

KPSE

Hand crimp tool

M22520/1-01

Locator for contact

sizes 20, 16 and 12

M22520/1-02

Test gage for

Hand crimp tool

M22520/3-1

Crimp tools

Insertion/Extraction tool

KPSE

Contact size

Insertion tool

Extraction tool

MS

-

ITT Cannon

CIT-20-18

CIT-20-5A

CIT-16-1

MS/ITT Cannon

MS24256R20

MS24256R16

MS24256R12

LN

20 without insulation support

20 with insulation support

16

12

W0,6LN29500

W1,2LN29500

MS24256A20

MS24256A16

MS24256A12

KPT14A4

Contact type

Coaxial

Insertion tool

-

Extraction tool

CET-C 6 B

KPSE/VG 95328

Contact size

Contacts

Contact type

Socket with

Contact order ref.

KPSE version

031-8704-203

VG 95328 version

031-8704-203

20

insulation support

Pin with

430-8560-006

insulation support

Socket

16

12

031-8704-000

430-8560-004

031-8704-012

430-8560-016

430-8560-020

031-8704-000

430-8560-004

Grounding pin

KPT14A4

Coaxial

Socket

DM 53740-5001

DM 53742-5001

KPSE

Wire hole fillers/Grommet sealing plugs

Contact size

20

16

12

Colour code

Red

Blue

Yellow

MS

LN

ITT Cannon

MS3187A20

MS3187-16A

MS3187-12

BL0,6LN 29500

BL1,2LN 29500

225-1012-000

225-1011-000

225-0072-000

225-0018-000

Koax 14A4

Flange gaskets

KPSE

Shell

size

8

Alu-Flex

conductive

Chloroprene

Shell

size

18

20

22

Alu-Flex

conductive

075-8543-005

075-8543-006

075-8543-007

075-8543-008

Chloroprene

non conductive

075-8543-010

075-8543-011

075-8543-012

075-8543-013

075-8543-014

non conductive

075-8543-015

075-8543-016

075-8543-017

075-8543-018

075-8543-000

075-8543-001

075-8543-002

075-8543-003

075-8543-004

10

12

14

16

24

27

Assembly Instructions

Miniature circu ar connector

KPT/KPSE

Contact

size

20

16

12

Cable size

Strip

mm²(AWG)

insulation

5,0 mm

6,5 mm

0,93-0,21 (20-24)

1,91-0,60 (16-20)

3,18-1,91 (12-14)

RG179B/u

14A4 Coax

Crimping contacts

1. Strip wires according to the table above taking care

not to cut or nick strands.

2. Insert stripped wire into contact crimp pot. Wire must

be visible thru inspection hole.

3. Using correct crimp tool and locator, cycle the tool

once to be sure the indentors are open. Insert contact

and wire into locator. Squeeze tool handles firmly and

completely to insure a proper crimp. The tool will not

release unless the crimp indentors in the tool head

have been fully actuated.

4. Release crimped contact and wire from tool. Be

certain the wire is visible thru inspection hole in contact.

Contact insertion

6. Use the proper contact insertion tool, and slide the

tool over the terminal end of the contact. The size 16

contact lies in the tool and the tool tip butts against the

contact shoulder. The rear, or insulation support, of the

size 20 contact butts against an internal shoulder in

the tool tip.

5. Remove hardware from plug and receptacle. Slide

hardware over wire bundle in proper order for re-

assembly.

7. Beginning from center cavity and working outwards,

insert wired contacts into rear of connector by hand

until the front of the contact shoulder is no more than

1/8" from the grommet. Holding the connector securely,

position tool behind contact. Push tool straight into

contact cavity until contact snaps into position. A light

pull on wire will assure that contact is locked securely.

Repeat for remaining contacts.

8. Use wire hole fillers or grommet sealing plugs to fill

any empty cavities and assemble hardware to rear of

plug or receptacle.

Completion

9. Check face of plug or receptacle for proper contact

installation.

pin contacts while the second index line is for removing

socket contacts. Carefully place the tool tip over the

contact to be extracted until the tool tip touches the

insulator face. Carefully rotate the tool until the index

line is slightly below the insulator face. Keep an even

pressure against tool body; push plunger forward with

thumb and index finger; and push the contact out

through the clip. Carefully remove extraction tool from

connector. Pull the wire by hand to complete the rem-

oval of the contact.

Contact extraction

10. Slide hardware back over wire bundle. Using pro-

per extraction tool or extraction end of proper insertion/

extraction tool, proceed as follows:

11. Use the proper extraction tool. There are two lines

on the clip sleeve which are vital to the contact rem-

oval process. The first index line is used for removing

Please ask for our detailed

Assembly Instruction

28

Subject to changes

KPT/KPSE

Miniature circular connectors

Cross Reference List KPT/MIL-C-26482, NFL 54125, VG 95328

Part No. KPT

ITT Cannon

KPT00B*-***

KPT00E*-***

KPT00F*-***

KPT00G*-***

KPT00J*-***

KPT00P*-***

KPT0E*-***DN

KPT0E*-***DZ

KPT01A*-***

KPT01B*-***

KPT01E*-***

KPT01F*-***

KPT01G*-***

KPT01J*-***

KPT01P*-***

KPT1E*-***DN

KPT06A*-***

KPT06B*-***

KPT06E*-***

KPT06F*-***

KPT06G*-***

KPT1E*-***DZ

Part No.

MIL-26482

Part No.

NFL 54125

Part No.

VG 95328

Part No.

LN 29500

25100A*-***50

25100AC*-***50

25100E*-***50

25100EC*-***50

25100J*-***50

MS3110E*-***

MS3110J*-***

MS3110P*-***

25100P*-***50

25101A*-***50

25101AC*-***50

25101E*-***50

25101EC*-***50

25101J*-***50

MS3111E*-***

MS3111F*-***

MS3111J*-***

MS3111P*-***

25101P*-***50

25106A*-***50

25106AC*-***50

25106E*-***50

25106EC*-***50

25106J*-***50

MS3116E*-***

MS3116F*-***

25102E*-***50Y11*

25107A*-***50Y11*

KPT06J*-***

KPT06P*-***

KPT6A*-***88

KPT6E*-***DN

KPT6E*-***DZ

KPT02E*-***

KPT07A*-***

KPT07E*-***

KPT07F*-***

KPT08E*-***

KPT08F*-***

KPT08P*-***

KPT7E*-***DN

KPTB*-***

MS3116J*-***

MS3116P*-***

25106P*-***50

MS3112E*-***

25102E*-***50

25107A*-***50

25107E*-***50

25107EC*-***50

H*-***VG 95328

MS3114E*-***

MS3114F*-***

25108EC*-***50

25108P*-***50

MS3119E*-***

251B*-***

Please note: Connectors acc. to VG 95328 and connectors of ITT Cannon series KPSE use different contacts – see page 27

Cross Reference List Protective Caps

Part No.

ITT Cannon

KPT80

Part No.

MIL-C-26482

MS 3180

Part No.

NFL 54125

Part No.

VG95328

Part No.

LN 29500

KPT80...C

KPT81

KPT81...C

KPT81...N

MS 3180...C

MS 3181

MS 3181...C

MS 3181...N

Z 2...VG 95328

Z 1...VG 95328

29

KPT/KPSE

Miniature circular connectors

Cross Reference List KPSE/MIL-C-26482, NFL 54125, VG95328

Part No. KPSE

ITT Cannon

Part No.

MIL-C-26482

Part No.

NFL 54-125

25100RA*-***50

Part No.

VG 95328

KPSE00A*-***

KPSE00B*-***

KPSE00E*-***

KPSE00F*-***

KPSE0E*-***DZ

KPSE00J*-***

KPSE00P*-***

KPSE0E*-***DN

KPSE00G*-***

KSPE01A*-***

KPSE01B*-***

KPSE01E*-***

KPSE01F*-***

KPSE01G*-***

KPSE01J*-***

KPSE01P*-***

KPSE*-***DN

KPSE02E*-***

KPSE06A*-***

KPSE06B*-***

KPSE06E*-***

KPSE06F*-***

KPSE06G*-***

KPSE06J*-***

KPSE06P*-***

KPSE6A*-***88

KPSE6E*-***88

KPSE6E*-***DN

KPSE6E*-***DZ

KPSE07A*-***

KPSE1E*-***DZ

KPSE7E*-***DN

KPSE07E*-***

KPSE07F*-***

KPSE08E*-***

KPSE08F*-***

KPSE08P*-***

KPSE7E*-***DZ

MS3120E*-***

MS3120F*-***

25100R*-***50

25100RC*-***50

A*-***VG 95328

B*-***VG 95328

R*-***VG 95328

MS3120P*-***

25100RP*-***50

25106RJ*-***50

25101RA*-***50

MS3121E*-***

MS3121F*-***

25101R*-***50

25101RC*-***50

25101RJ*-***50

MS3121P*-***

MS3122E*-***

25101RP*-***50

25102R*-***50

25106RA*-***50

C*-***VG 95328

K*-***VG 95328

MS3126E*-***

MS3126F*-***

25106R*-***

25106RC*-***50

25106RJ*-***50

MS3126P*-***

25106RP*-***50

25107RA*-***50

N*-***VG 95328

J*-***VG 9532

M*-***VG 95328

S*-***VG 95328

D*-***VG 95328

E*-***VG 95328

MS3124E*-***

MS3124F*-***

25107R*-***50

25107RC*-***50

25108RC*-***50

25108RP*-***50

T*-***VG 95328

Please note: Connectors acc. to VG 95328 and connectors of ITT Cannon series KPSE use different contacts – see page 27

30

Subject to changes

KPT/KPSE

Miniature circular connectors

Product Safety Information

THIS NOTE SHOULD BE READ IN CON-JUNCTION

WITH THE PRODUCT DATA SHEET/CATALOGUE.

FAILURE TO OB-SERVE THE ADVICE IN THIS INFOR-

MATION SHEET AND THE OPERATING CONDITIONS

SPECIFIED IN THE PRODUCT DATA SHEET/

CATALOGUE COULD RESULT IN HAZAR-DUOUS

SITUATIONS.

Electrical connectors may be damaged in transit to

the customers, and damage may result in creation

of hazards. Products should therefore be examined

prior to installation/use and rejected if found to be

damaged.

Always use the correct application tools as specified

in the Data Sheet/Catalogue.

Do not permit untrained personnel to wire, assemble

or tramper with connectors.

4. DISPOSAL

Incineration of certain materials may release

noxious or even oxid fumes.

For operation voltage please see appropriate national

regulations

1. MATERIAL CONTENT AND PHYSICAL

FORM

IMPORTANT GENERAL INFORMATION.

Electrical connectors do not usually contain

hazardous materials. They contain conducting and

non-conducting materials and can be divided into

two groups.

5. APPLICATION

1. Air and creepage paths/Operating voltage

The admissible operating voltages depend on the

individual applications and the valid national and

other applicable safety regulations.

Connectors with exposed contacts should not be

selected for use on the current supply side of an

electrical circuit, because an electric shock could

result from touching exposed contacts on an

unmated connector. Voltages in excess of 30 V ac

or 42.5 V dc are potentially hazardous and care

should be taken to ensure that such voltages can

not be transmitted in any way to exposed metal parts

of the connector body. The connector and wiring

should be checked, before making live, to have no

damage to metal parts of insulators, no solder blobs,

loose strands, conducting lubricants, swarf, or any

other undersired conducting particles. Insulation

resistance should be checked to make certain that

no low resistance joints or spurious conducting path

are existing between contacts and exposed metal

parts of the connector body. Further the contact

resistance of the connectors should be measured

within the electrical circuit in order to identify high

resistances which result in excessive connector

heating.

a) Printed circuit types and low cost audio types

which employ all plastic insulators and casings.

For this reason the air and creepage path date

are only reference values. Observe reduction of air

and creepage paths due to PC board and/or harnes-

sing.

b) Rugged, Fire Barrier and High Reliability types

with metal casings and either natural rubber,

synthetic rubber, plastic or glass insulating

materials.

2. Temperature

All information given are temperature limits. The

operation temperature depends on the individual

application.

Contact materials vary with type of connector and

also application and are usually manufactured from

either copper, alloys, nickel, alumel, chromel or

steel. In special applications, other alloys may be

specified.

3. Other important information

Cannon continuously endeavours to improve their

products. Therefore, Cannon products may deviate

from the description, technical data and shape as

shown in this catalogue and data sheets.

2. FIRE CHARACTERISTICS AND ELECTRIC

SHOCK HAZARD

There is no fire hazard when the connector is

correctly wired and used within the specified

parameters.

4. Harnessing and Assembly Instructions

If applicable, our special harnessing and/or assem-

bly instruction has to be adhered to. This is provid-

ed at request.

Incorrect wiring or assembly of the connector or

careless use of metal tools or conductive fluids,

or transit damage to any of the component parts

may cause electric shock or burns. Live circuits

must be broken by separating mated connectors

as this may cause arcing, ionisation and burning.

Heat dissipation is greater at maximum resistance

in a circuit. Hot spots may occur when resistance

is raised locally by damage, e.g. cracked or

deformed contacts, broken strangs of wire. Local

overheating may also result from the use of the

incorrect application tools or from poor quality

soldering or slack screw terminals. Overheating may

occur if the ratings in the Product Data Sheet/

Catalogue are exceeded and can cause breakdown

of insulation and hence electric shock.

If heating is allowed to continue it intensifies by

further increasing the local resistance through loss

of temper of spring contacts, formation of oxide

film on contacts and wires, and leakage currents

through carbonisation of insulation and tracking

paths. Fire can then result in the presence of

combustible materials and this may release noxious

fumes. Overheating may not be visually apparent.

Burns may result from touching overheated

components.

ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended

to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating

specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed

to create any liability on the part of ITT Cannon. Any new issue of this catalog shall automatically invalidate and supersede

any and all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT

Cannon under this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or

consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or

strict liability arising in connection with the design, manufacture, sale, use or repair of the products.Product availability,

prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders

based on development samples delivered. This catalog is not be construed as an offer. It is intended merely as an

invitation to make an offer. By this publication, ITT Cannon does not assume responsibility or any liability for any patent

infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted,

indicating the source. However, ITT Cannon's prior consent must be obtained in all cases.

3. HANDLING

Care must be taken to avoid damage to any

component parts of electrical connectors during

installation and use. Although there are normally

no sharp edges, care must be taken when handling

certain components to avoid injury to fingers.

Cannon is a trademark of ITT Industries, Inc

31


型号：	KPT02B9-36PXDN
厂家：	ITT Cannon
描述：	General purpose solder contact connectors 通用焊接触点连接器连接器
文件：	总31页 (文件大小：326K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

KPT02B9-36PXDN [ITT]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E