MS27497E18B35PA [ITT]
MIL Series Connector, 66 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle,;
| 型号： | MS27497E18B35PA |
| 厂家： | 
ITT Cannon |
| 描述： | MIL Series Connector, 66 Contact(s), Aluminum Alloy, Male, Crimp Terminal, Receptacle, |
| 文件： | 总40页 (文件大小：3010K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
38999-Style Connectors
Cannon 38999-Style Series I, II, III Connectors
ITT Cannon connectors set the industry standard for performance and reliability in the most demanding
conditions and harshest environments. Our 38999-Style Series I, II, III Connectors are designed to
withstand the extreme shock, exposure and vibration that are commonplace in Defense and
Commercial Aerospace applications.
We offer lightweight, space-saving solutions to our military customers, coupled with high bandwidth and
high power for severe service application needs. More than a century of experience, coupled with
unparalleled engineering and testing resources, has established ITT Cannon as one of the premier
providers of interconnect solutions worldwide.
With a proven track record for engineering and manufacturing excellence, ITT Cannon continues to
deliver a broad range of innovative products and solutions that enable our customers to meet their most
demanding design requirements, where impeccable reliability and safety are essential.
Example Application Areas
• Defense
– Military aircraft
– Military communication systems
– Hand held and vehicle platforms
– Military ground support systems
– Military computer systems
– Harsh environment platforms
– Blind mate applications
– High density, low signal platforms
– Hand held and vehicle platforms
– Unmanned systems
• Aerospace
– Aircraft engines
– General electric testing equipment
– Commercial business aviation
– Aerospace launch vehicles
www.ittcannon.com
38999-Style Connectors: Precision Engineered, Lightweight & Rugged
ITT Cannon’s 38999-Style Series I, II, III Connectors are designed to tackle the most extreme conditions
with exceptional versatility in the harshest environments. Small, lightweight and highly reliable, our D38999-
Style connectors deliver consistency and performance when it matters most.
D38999-Style Series I (KJL)
ITT Cannon KJL 38999-Style Series I connectors offer high-density contact
arrangements in a light-weight miniature circular connector. ITT Cannon KJL
series connectors are an industry standard for military and aerospace
applications. The environmentally sealed KJL series features quick-mating,
three-point bayonet coupling and operates across a wide temperature range.
D38999-Style Series II (KJ)
ITT Cannon KJ 38999-Style Series II are a weight-reduced and low profile circular
connector ideally suited for avionic applications where space and weight are prime
considerations. It offers high-density contact arrangements in a light-weight miniature
circular connector. ITT Cannon KJ series connectors feature a quick-mating, three-
point bayonet coupling, are environmentally-sealed and operate across a wide
temperature range. ITT Cannon KJ series mil spec connectors were originally designed
for military vehicles and are now industry standard aerospace and military connectors.
38999-Style Series III (KJB)
The de-facto standard circular connector for use in harsh military and aerospace
environments, ITT Cannon's KJB 38999-Style Series III Connectors offer high-
density contact arrangements in a light-weight miniature circular connector. ITT
Cannon's KJB series connectors have quick-mating, triple-lead threaded, self-locking
coupling, are environmentally-sealed and operate across a wide temperature range.
These connectors were originally designed for military vehicles and are now use for
multiple applications throughout the Aerospace & Defense Industry.
38999-Style Series III Composite (KJB)
A lightweight standard circular connector for use in military and aerospace environments
with significant weight savings over aluminium-bodied D38999-Style. High density
layouts with up to 128 data connections and power contacts rated up to 23A.
Features a triple-start coupling with anti-decoupling ratchet for high vibration
applications, Cadmium and Electroless Nickel platings, 100 percent scoop-proof
contacts and rated to 1500 mating cycles.
www.ittcannon.com
Table of Contents
Specifications and Test Data ..............................................................................................................................................3-5
38999-Style Series I............................................................................................................................................................6-9
38999-StyleSeries II........................................................................................................................................................10-15
38999-Style Series III......................................................................................................................................................16-18
38999-Style Series III Composite....................................................................................................................................19-20
Polarizing Positions..............................................................................................................................................................21
Contact Arrangements ....................................................................................................................................................22-23
Contacts ..........................................................................................................................................................................24-27
Torque Values / Wire Dimensions........................................................................................................................................28
Backshells .......................................................................................................................................................................29-31
Tools.....................................................................................................................................................................................32
Assembly Instructions ..........................................................................................................................................................33
Specifications.......................................................................................................................................................................34
Product Safety and Warranty...............................................................................................................................................35
About ITT Cannon................................................................................................................................................................36
In addition to our 38999-style series, we also offer these connectivity solutions:
Combo D-Sub Product offering includes ability to integrate signal
and coax, high power, and high voltage.
CA-Bayonet – Signal and power connectors with exceptional
sealing against the ingress of fluids and will withstand the effects
of high vibrations.
Microminiature – High performance and reliability with exceptional
versatility. Available in rectangular, circular and strip configurations,
many of our connectors are designed to be comparable to the
MIL-DTL-83513 specification.
www.ittcannon.com
2
38999-Style Series I, II, III Connectors*
SERIES I
SERIES II
SERIES III
SHELL HARDWARE
is aluminum alloy
GROUNDING FINGERS
(Standard on Series I connector)
MONOBLOC
INSERT
WIRE SEALING
GROMMET
HIGH STRENGTH
MULTIPLE-TINE
METAL RETAINING CLIP
assures positive retention with
inwardly deflected tines that lock
securely behind contact shoulder
HIGH STRENGTH
MULTIPLE-TINE
CLOSED ENTRY
SOCKET CONTACT
DESIGN
METAL RETAINING CLIP
assures positive retention with
inwardly deflected tines that lock
securely behind contact shoulder
INSULATOR
TO SHELL SEAL
SIMPLE, STRONGER
CONTACTS
are designed to resist
bending and are
crimp terminated
INSULATOR
TO SHELL SEAL
WIRE SEALING
GROMMETS
SIMPLE, STRONGER
CONTACTS
are designed to resist
bending and are
crimp terminated
WIRE SEALING
GROMMETS
PERIPHERAL
SEALING
GASKET
PERIPHERAL
SEALING
GASKET
CLOSED ENTERY
SOCKET CONTACT
DESIGN
INTERFACIAL
SEAL
PERIPHERAL SEAL
around the connector interface is
designed to minimize compression
set when connectors are mated
GROUNDING FINGERS
SIMPLER, STRONGER
CONTACTS
are designed to resist bending
and are crimp terminated
RESILIENT PIN
INTERFACIAL
SEAL
INTERFACIAL SEALS
feature individual raised seal
barriers around each pin contact
• Corrosion and zinc resistant shells of aluminum
alloy with cadmium and zinc over nickel plating
withstand a 500 hour salt spray exposure
• Rear release crimp snap-in contacts
• High contact density
• Standard MIL-C-39029 contacts, MIL-I-81969
application tools and MIL-STD 1560 insert
arrangements
• Special/custom capabilities
• Interfacial seal helps prevent electrolytic erosion of
contacts - Series III
• Superior EMI shielding provides outstanding pro-
tection up to 65dB at 10 GHZ. - Series III
• 100% scoop-proof - Series I and III
• Light weight /Low Profile - Series II
• Operates under severe high temperature vibration
testing through 200 C - engineered for high densi-
ty circuitry - Series III
Specification Comparison
Design Criteria
Low Profile/Light Weight
Scoop Proof
Series I
Series II
yes
Series III (Aluminum)
Series III (Composite)
no
no
yes
yes
yes
no
yes
Coupling System
Electrolytic Erosion
Durability (Cycles)
High Impact Shock
External Bending Moment
Shell Size 25
Bayonet
no
Bayonet
no
Triple Start Thread
Triple Start Thread
yes
500
yes
yes
500
yes
250
1500
yes
no
650 in/lbs
49.5G, Ambient
60G
150 in/lbs
1000 in/lbs
49.5G, Ambient
60G
1000 in/lbs
49.5G, Ambient
60G
Random Vibration "J"
Sine Vibration
43.7G, Ambient
Sand, Dust, Ice
yes
yes
yes
Shell Size
9-25
8-24
9-25
9-25
Contact Rating
Crimp Well Data
Contact
Size
Test Current
DC Test Amperage
Maximum
Millivolt Drop*
Well
Diameter
Well
Depth
22D
22M**
22**
20
5
40
30
40
35
25
25
.0345 .0010
.0280 .0010
.0365 .0010
.0470 .0010
.0670 .0010
.1000 .0020
.157/.141
.157/.141
.157/.141
.229/.209
.229/.209
.229/.209
3
5
7.5
13
23
16
12
* Maximum millivolt drop data is determined by measuring resistance of mated contacts from end to en
** For reference only
Dimensions shown in inches (mm)
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
3
38999-Style Series I, II, III Connectors*
Performance and Material Specifications
MATERIALS AND FINISHES
Aluminum
Grounded Plug
Composite
Grounded Plug
*DISCLAIMER: Our facility is
not currently certified by the
DLA and this product is not
covered by the QPL/QML.
Mil-Spec part numbers are
only for cross reference to
the Commercial Equivalent.
Receptacle
Receptacle
Shell
Aluminum alloy
Aluminum alloy*
Thermoplastic
High grade plastic
Thermoplastic
Insulator
Contacts
High grade plastic
High grade plastic
High grade plastic
Copper alloy, gold plate Copper alloy, gold plate Copper alloy, gold plate Copper alloy, gold plate
Grommet and Seal Silicone base elastomer Silicone base elastomer Silicone base elastomer Silicone base elastomer
Jam Nut
Aluminum alloy
-
-
-
-
-
Grounding Spring
Beryllium copper
Beryllium copper
*Finish as noted in How To Order sections.
ELECTRICAL DATA
Contact Size: 22D, 22M*, 22*, 20, 16 and 12
Contact Rating and Wire Size Accomodation
Contact Size and Test Amps
Wire
22D
22M*
22*
20
16
12
Size
28
26
24
22
20
18
16
14
12
1.5
2.0
3.0
5.0
-
1.5
-
2.0
3.0
5.0
-
-
-
-
-
2.0
-
-
3.0
3.0
5.0
7.5
-
-
-
-
-
-
-
-
-
-
-
7.5
10.0
13.0
-
-
-
-
-
-
-
-
-
-
-
-
17.0
23.0
-
-
-
-
*For reference only
Service Rating
Service Rating N
Service Rating I
Service Rating II
Service Rating M
Mated
Unmated
Mated
Unmated
Mated
Unmated
Altitude
Mated
Unmated
1000
600
600
600
1000
400
260
200
1800
1000
1000
1000
1800
600
400
200
2300
1000
1000
1000
2300
800
500
200
Sea Level
50,000 ft.
70,000 ft.
100,000 ft.
1300
800
800
800
1300
550
350
200
Test voltage, AC (rms), work voltage to be determined by application
Test Data
Test Description
Durability
Parameters
500 cycles of mating and unmating, 250 cycles for Series II with spring fingers
Class F, N; - 65ºC (-85ºF) to + 200ºC (+392ºF) Class A; - 65ºC (-85ºF) to + 150ºC (+302ºF)
Class B,W: - 65ºC (-85ºF) to + 175ºC (+347ºF)
Temperature Range
Mated connectors are vibrated with weights to simulate rear accessory loads to
the following levels:
Vibration
Sine Vibration:
Up to 60 G's - Series I & III (at rated temperature - Series III)
Not applicable for Series II.
43.7 Grms at rated temperature - Series III
49.5 Grms at Ambient Temperature - Series I & III
43.7 Grms at Ambient Temperature - Series II
Random Vibration:
Class F: EMI leakage attenuation, greater than 90dB at 100Mhz, greater than 65dB
at 10 GHz. Shell to shell conductivity, 1.0 millivolt max. resistance.
Class W: EMI leakage attenuation, greater than 90dB at 100 MHz, greater than 50dB
at 10 GHz. Shell to shell conductivity, 2.5 millivolt max.
EMI Shielding
Effectiveness
Class B, W, and Z will withstand 500 hours salt spray.
Class A, F, N, will withstand 48 hours salt spray.
Corrosion Resistant
Connectors are fluid resistant to many fuels, solvents, coolants and oils.
Fluid Immersion
High Impact Shock
Mated conectors terminated with MIL-C-915 cable and environmentally sealed
backshells will withstand high impact shock per MIL-S-901. Applicable to Series
I & III only.
Designed to operate between sea level and 100,000 ft. above sea level.
Altitude
Mated connectors shall withstand sand and dust per method 110 of MIL-STD-202 and
be ice resistant. Applicable to Series I & III only.
Other Environments
NOTE: For hermetic standard or test data please consult ITT.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
4
38999-Style Series I, II, III Connectors*
Insert Availability and Identification
Contact Size
16
Total
Series
I & III
9-35
9-98
11-4
Service
Rating
M
I
I
I
M
I
I
II
I
I
M
I
II
I
I
I
M
I
I
II
I
M
I
II
I
I
I
M
I
II
M
I
I
M
II
I
M
I
I
I
I
I
I
M
I
I
Series
II
8-35
8-98
DISCLAIMER:Our facility is not
currently certified by the DLA and
this product is not covered by the
QPL/QML. Mil-Spec part numbers
are only for cross reference to
the Commercial Equivalent.
Contacts
22D
6
20
12
8
6
3
4
5
13
6
7
3
4
8
22
10
5
15
18
19
37
12
6
3
4
5
10-5
11-5
13
22
10-35
10-98
10-99
12-3
12-4
12-8
12-35
12-98
14-5
14-15
14-18
11-35
11-98
11-99
6
7
3
4
13-4
13-8
8
13-35
13-98
15-5
15-15
15-18
15-19
15-35
15-97
17-6
10
5
1
14
18
19
37
55
14-35
14-97
16-6
8
4
8
6
8
16-8
17-8
26
55
23
11
28
30
32
66
11
16
79
39
41
4
21
32
100
53
55
56
19
24
29
128
37
43
46
8
26
21
16-26
16-35
16-99
18-11
18-28
18-30
18-32
18-35
17-26
17-35
17-99
19-11
19-28
19-30
19-32
19-35
21-11
21-16
21-35
21-39
21-41
21-75
23-21
23-32
23-35
23-53
23-55
25-4
25-19
25-24
25-29
25-35
25-37
25-43
25-46
25-8
25-20
25-42
25-61
25-64
25-66
2
11
2
26
29
32
1
66
79
11
16
2
20-16
20-35
20-39
20-41
37
41
4***
21
22-21
22-32
22-35
22-53
22-55
24-4
32
100
128
53
55
48
8
19
12
12
29
24-24
24-29
24-35
37
20
4
23
40
2***
8***
3***
4*
I, Twinax
Twinax
N, Coax, Twinax
30
42
61
64
66
10
38
61
8
13
4**
6
I, Coax
I
I
I
24-61
40
53
10
11
2
* Coax for RG-180 cables
** Coax for RG-174, -179, or -316 cables
*** Twinax for M17/176-00002 cables
(check factory for other cable applications)
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
5
38999-Style Series I Connectors*
How To Order
MS27467-Style T 17
B 35 S
Military Nomenclature
MS NUMBER SHELL STYLE
CLASS
DISCLAIMER:Our facility is not currently
certified by the DLA and this product is not
covered by the QPL/QML. Mil-Spec part
numbers are only for cross reference to the
Commercial Equivalent.
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MS NUMBER SHELL STYLE
MS27466 - Wall Mounting Receptacle
MS27468 - Jam Nut Receptacle
MS27467 - Grounded Plug
MS27656 - Wall Mounting Receptacle
(back panel mounting)
MS27505 - Box Mounting Receptacle
(back panel) (Class E)
SHELL SIZE
9, 11, 13, 15, 17, 19, 21, 23, and 25
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate,
-85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
F - Electroless nickel, -85ºF to +392ºF
(-65ºC to +200ºC)
CLASS
*Used only when other than power contacts are to
be installed (i.e. shielded, thermocouple, etc.)
E - Inactive for new design.
Superseded by Class T.
G -Environmental resistant Space Grade
P - Environment - resistant with straight potting
cup accessories
T - Environment - resistant with accessory threads
and teeth, except MS27505 (without rear
accessory) (Class T not applicable to MS27505)
POLARIZING POSITION
A,B,C, and D. (No letters required for normal).
See page 21.
CONTACT ARRANGEMENT
See pages 22 and 23.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”
Cannon Nomenclature
KJL 6
T 17 B 35 S N
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
SERIES PREFIX
KJL - Series I-Scoop proof
SHELL STYLE
0 - Wall mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
SHELL SIZE
CONTACT ARRANGEMENT
See pages 22 and 23.
9,11,13,15,17,19,21,23 and 25
4 - Thru bulkhead receptacle*
5 - Box mounting receptacle (back panel mount-
ing)
6 - Straight plug, grounded
7 - Jam nut receptacle
HARDWARE FINISH STANDARD
CONTACT STYLE
P - Pin
S - Socket
A - Bright cadmium over electroless nickel plate,
-85ºF to +302ºF (-65ºC to +150ºC)
B - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to + 175ºC)
N - Electroless nickel, -85ºF to +392ºF (-65ºC to
+200ºC)
PS - Pin-Socket (Shell style 4 only)
CLASS
POLARIZING POSITION
N (normal), A, B, C, D. See page 21.
E - Inactive for new design.
Superseded by Class T.
Z - Zinc Nickel, Black
- - (Dash) When using a finish modification code
G - Environmental resistant - Space Grade
F - Environment - resistant with strain relief
accessory
P - Environment - resistant with straight potting
cup accessory
T - Environment - resistant (without rear
accessory) (Class T not applicable to KJL5)
MODIFICATION CODE
L -
16 -
Less contacts, not stamped on connector
Outgassed
NASA space graded connector
Clinch Nuts installed
4-40 Size 9-21, 6-32 Size 23-25)
Outgassed, standard connector
17 -
27 -
A296 - Black Zinc Cobalt, RoHS Compliant
*Consult factory for availability
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
6
38999-Style Series I Connectors*
Wall Mounting Receptacle
KJL0
MS27466-Style
(MS service class E, P, T)
1.240
(31.50)
MAX.
POLARIZING
KEYWAY
L
J DIA.
MAX.
H
T THREAD
N
M
A
P
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
Shell
Size
A
H
J
L
M
N
P
T
F
P
Dia. Max.
Max.
Dia. Max.
Max.
Max.
T.P.
Dia. Max.
Thread
Cable Clamp
Potting Max.
9
.573 (14.55) .100 (2.54) .662 (16.81) .632 (16.05) .958 (24.33) .719 (18.26) .138 (3.51) 7/16-28UNEF-2A
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.846 (46.89)
1.966 (49.94)
1.966 (50.70)
1.966 (50.70)
1.966 (50.70)
1.966 (50.70)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
1.451 (36.86)
11
13
15
17
19
21
23
25
.701 (17.81) .100 (2.54) .810 (20.57) .632 (16.05) 1.051 (26.70) .812 (20.62) 138 (3.51)
9/16-24UNEF-2A
.851 (21.62) .100 (2.54) .960 (24.38) .632 (16.05) 1.145 (29.08) .906 (23.01) .138 (3.51) 11/16-24UNEF-2A
.976 (24.79) .100 (2.54) 1.085 (27.56) .632 (16.05) 1.239 (31.47) .969 (24.61) .138 (3.51) 13/16-20UNEF-2A
1.101 (27.97) .100 (2.54) 1.210 (30.73) .632 (16.05) 1.332 (33.83) 1.062 (26.97) .138 (3.51) 15/16-20UNEF-2A
1.208 (30.68) .100 (2.54) 1.317 (33.45) .632 (16.05) 1.458 (37.03) 1.156 (29.36) .138 (3.51) 1-1/16-18UNEF-2A
1.333 (33.86) .130 (3.30) 1.442 (36.63) .602 (15.29) 1.582 (40.18) 1.250 (31.75) .138 (3.51) 1-3/16-18UNEF-2A
1.458 (37.03) .130 (3.30) 1.567 (39.80) .602 (15.29) 1.708 (43.38) 1.375 (34.93) .157 (3.99) 1-5/16-18UNEF-2A
1.583 (40.21) .130 (3.30) 1.692 (42.98) .602 (15.29) 1.832 (46.53) 1.500 (38.10) .157 (3.99) 1-7/16-18UNEF-2A
Wall Mounting Receptacle (Back Panel)
MS27656-Style
(MS service class E, P, T)
KJL3
1.247
(31.67)
MAX.
J DIA.
MAX.
POLARIZING
KEYWAY
L
H
T
THREAD
M
N
A
P
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
E MAX.
PANEL
THICKNESS
(including mounting hardware)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
Shell
A
E
H
J
L
M
N
P
T
F
P
Size Dia. Max.
Max.
Max.
Dia. Max.
Max.
Max.
T.P.
Dia. Max.
Thread
Cable Clamp Potting Max.
1.805 (45.85) 1.410 (35.81)
1.805 (45.85) 1.410 (35.81)
1.805 (45.85) 1.410 (35.81)
1.805 (45.85) 1.410 (35.81)
1.935 (48.90) 1.410 (35.81)
1.955 (49.66) 1.410 (35.81)
1.955 (49.66) 1.410 (35.81)
1.955 (49.66) 1.410 (35.81)
1.955 (49.66) 1.410 (35.81)
9
.573 (14.55) .234 (5.94) .100 (2.54) .662 (16.81) .820 (20.83) .958 (24.33) .719 (18.26) .138 (3.51) 7/16-28UNEF-2A
11 .701 (17.81) .234 (5.94) .100 (2.54) .810 (20.57) .820 (20.83) 1.051 (26.70) .812 (20.62) 138 (3.51)
9/16-24UNEF-2A
13 .851 (21.62) .234 (5.94) .100 (2.54) .960 (24.38) .820 (20.83) 1.145 (29.08) .906 (23.01) .138 (3.51) 11/16-24UNEF-2A
15 .976 (24.79) .234 (5.94) .100 (2.54) 1.085 (27.56) .820 (20.83) 1.239 (31.47) .969 (24.61) .138 (3.51) 13/16-20UNEF-2A
17 1.101 (27.97) .234 (5.94) .100 (2.54) 1.210 (30.73) .820 (20.83) 1.332 (33.83) 1.062 (26.97) .138 (3.51) 15/16-20UNEF-2A
19 1.208 (30.68) .234 (5.94) .100 (2.54) 1.317 (33.45) .820 (20.83) 1.458 (37.03) 1.156 (29.36) .138 (3.51) 1-1/16-18UNEF-2A
21 1.333 (33.86) .204 (5.18) .130 (3.30) 1.442 (36.63) .790 (20.07) 1.582 (40.18) 1.250 (31.75) .138 (3.51) 1-3/16-18UNEF-2A
23 1.458 (37.03) .204 (5.18) .130 (3.30) 1.567 (39.80) .790 (20.07) 1.708 (43.38) 1.375 (34.93) .157 (3.99) 1-5/16-18UNEF-2A
25 1.583 (40.21) .193 (4.90) .130 (3.30) 1.692 (42.98) .790 (20.07) 1.832 (46.53) 1.500 (38.10) .157 (3.99) 1-7/16-18UNEF-2A
Performance Specifications-Pages 3 and 4. Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32. Contact Arrangements - Pages 22 and 23.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
7
38999-Style Series I Connectors*
Box Mounting Receptacle (Back Panel)
MS27505E-Style
(MS service class E)
KJL5E
L
K
MAX.
H
.060
(1.52)
MAX.
POLARIZING
KEYWAY
J DIA.
MAX.
GROMMET
A
M
N
E MAX.
PANEL THICKNESS
(INCLUDING MOUNTING
HARDWARE)
P
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: This connector does not accommodate backshells.
Shell
Size
A
E
Max.
H
Max.
J
K
Max.
L
Max.
M
Max.
N
T.P.
P
Dia. Max.
Dia. Max.
Dia. Max.
9
.573 (14.55)
.701 (17.81)
.851 (21.62)
.976 (24.79)
1.101 (27.97)
1.208 (30.68)
1.333 (33.86)
1.458 (37.03)
1.583 (40.21)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.234 (5.94)
.204 (5.18)
.204 (5.18)
.193 (4.90)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.100 (2.54)
.130 (3.30)
.130 (3.30)
.130 (3.30)
.662 (16.81)
.810 (20.57)
.960 (24.38)
1.085 (27.56)
1.210 (30.73)
1.317 (33.45)
1.442 (36.63)
1.567 (39.80)
1.692 (42.98)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.219 (5.56)
.250 (6.35)
.250 (6.35)
.250 (6.35)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.790 (20.07)
.790 (20.07)
.790 (20.07)
.958 (24.33)
1.051 (26.70)
1.145 (29.08)
1.239 (31.47)
1.332 (33.83)
1.458 (37.03)
1.582 (40.18)
1.708 (43.38)
1.832 (46.53)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
.138 (3.51)
138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.138 (3.51)
.157 (3.99)
.157 (3.99)
11
13
15
17
19
21
23
25
Straight Plug Grounded
MS2746-Style
KJL6
(MS service class E, P, T)
L
POLARIZING
KEYWAY
J DIA.
T THREAD
A DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
G
DIA.
MAX.
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
(Class T)
L
Shell
Size
A
G
J
T
F
P
Max.
Dia. Max.
.859 (21.82)
.984 (24.99)
1.156 (29.36)
1.281 (32.54)
1.406 (35.71)
1.516 (38.51)
1.641 (41.68)
1.766 (44.86)
1.891 (48.03)
Dia. Max.
Max.
Thread
Cable Clamp
Potting Max.
9
.585 (14.86)
.717 (18.21)
.866 (22.00)
.990 (25.15)
1.115 (28.32)
1.222 (31.04)
1.347 (34.21)
1.472 (37.39)
1.597 (40.56)
.483 (12.27)
.611 (15.52)
.760 (19.30)
.885 (22.48)
1.010 (25.65)
1.115 (28.32)
1.240 (31.50)
1.365 (34.67)
1.490 (37.85)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.793 (45.54)
1.793 (45.54)
1.793 (45.54)
1.793 (45.54)
1.913 (48.59)
1.943 (49.35)
1.943 (49.35)
1.943 (49.35)
1.943 (49.35)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.671 (42.44)
1.766 (44.86)
1.766 (44.86)
1.766 (44.86)
11
13
15
17
19
21
23
25
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31 and 32.
Contact Arrangements - Pages 22 and 23.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
8
38999-Style Series I Connectors*
Jam Nut Receptacle
MS27468-Style
(MS service class E,P,T)
KJL7
.125 (3.18) MAX.
.062 (1.57) MIN.
.920 (23.37) MAX.
PANEL THICKNESS
U MAX.
HEX
H
POLARIZING
KEYWAY
T THREAD
J DIA.
D
A
DIA. DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
S
V THREAD
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
Shell
Size
A
D
H
J
S
T
U
V
F
P
Dia. Max.
Max.
Max.
Dia. Max.
Dia. Max.
Thread
Max. Hex. Thread Class 2A
.892 (22.66) 11/16-24UNEF
1.017 (25.83) 13/16-24UNEF
Cable Clamp Potting Max.
1.846 (46.89) 1.451 (36.86)
1.846 (46.89) 1.451 (36.86)
1.846 (46.89) 1.451 (36.86)
1.846 (46.89) 1.451 (36.86)
1.966 (49.94) 1.451 (36.86)
1.996 (50.70) 1.451 (36.86)
1.996 (50.70) 1.451 (36.86)
1.996 (50.70) 1.451 (36.86)
1.996 (50.70) 1.451 (36.86)
9
.573 (14.55) .655 (16.64) .120 (3.05) .662 (16.81) 1.204 (30.58)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
11 .701 (17.81) .755 (19.18) .120 (3.05) .810 (20.57) 1.391 (35.33)
13 .851 (21.62) .942 (23.93) .120 (3.05) .960 (24.38) 1.516 (35.51)
15 .976 (24.79) 1.066 (27.08) .120 (3.05) 1.085 (27.56) 1.641 (41.68)
17 1.101 (27.97) 1.191 (30.25) .120 (3.05) 1.210 (30.73) 1.766 (44.86)
19 1.208 (30.68) 1.316 (33.43) .151 (3.84) 1.317 (33.45) 1.954 (49.63)
21 1.333 (33.86) 1.441 (36.60) .151 (3.84) 1.442 (36.63) 2.078 (52.78)
23 1.458 (37.03) 1.566 (39.78) .151 (3.84) 1.567 (39.80) 2.204 (55.98)
25 1.583 (40.21) 1.691 (42.95) .151 (3.84) 1.692 (42.98) 2.328 (59.13)
1.205 (30.61)
1-20UNEF
1.329 (33.76) 1-1/8-18UNEF
1.455 (36.96) 1-1/4-18UNEF
1.579 (40.11) 1-3/8-18UNEF
1.705 (43.31) 1-1/2-18UNEF
1.829 (46.46) 1-5/8-18UNEF
20.17 (51.23) 1-3/4-18UNS
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22, 23.
Panel Cutouts
Jam Nut Receptacles
Flange Mounted Receptacles
P
ꢀ..0 ꢁ.ꢀꢂ13
4 HOLES
A
R
ꢁTꢀP3
B
A
+ꢀ.ꢂ. ꢁ.ꢀ203
-ꢀ... ꢁ.ꢀ..3
A
B
(.00)
(.25)
(Class T)
Shell
Size
A
Dia.
P
Dia.
Mtg.
Screw
Shell
Size
+.010 (.25)
-.000 (.00)
+.000
-.010
R
9
.670 (17.02)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
.700 (17.78)
9
.665 (16.89)
.812 (20.62)
.965 (24.51)
1.085 (27.55)
1.250 (31.75)
1.322 (33.57)
1.447 (36.75)
1.569 (39.85)
1.703 (43.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.150 (3.81)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
1.500 (38.10)
#4
11
13
15
17
19
21
23
25
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
11
13
15
17
19
21
23
25
#4
#4
#4
#4
#4
#4
#6
#6
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
9
38999-Style Series II Connectors*
How To Order
MS27473-Style
T
18
F
35
S
Military Nomenclature
MS NUMBER SHELL STYLE
DISCLAIMER: Our facility is not currently certified
by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only
for cross reference to the Commercial Equivalent.
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
MS NUMBER SHELL STYLE
MS27472 - Wall Mounting Receptacle
MS27473 - Straight Plug
POLARIZING POSITION
MS27474 - Jam Nut Receptacle
MS27484 - Grounded Plug
MS27497 - Wall Mounting Receptacle (back panel
mounting)
MS27513 - Box Mounting Receptacle
MS27499 - Box Mounting Receptacle (Class E)
MS27508 - Box Mounting (back panel mounting)
(Class E)
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, 24.
CONTACT ARRANGEMENT
See pages 22 and 23.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, -
85ºF to + 302ºF (- 65ºC to
+ 150ºC)
B - Olive drab cadmium over electoless nickel
plate, - 85ºF to + 347ºF (- 65ºC to
+ 175ºC)
CONTACT STYLE
P - Pin
S - Socket
*A - Less Pin Contact
*B - Less Socket Contact
CLASS
E - Environment - resistant with rear accessory
(without strain relief)
G - Environmental - resistant wall mount and jam
nut receptacle and plug types. Space Grade.
P - Enironment - resistant with straight potting
cup accessories
T - Environment - resistant (without rear acces-
sory). (Class T not applicable to MS27499,
MS27513, and MS27508.)
*Used only when other than power contacts are to
be installed (i.e. shielded, thermocouple, etc.)
F - Electroless nickel, - 85ºF to + 392ºF
(-65ºC to + 200ºC)
POLARIZING POSITION
A, B, C, and D (no letter required for normal).
See page 21.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less
Contacts”.
ITT Nomenclature
KJ
6
T
18
N
35
S N
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMNT
CONTACT STYLE
SERIES PREFIX
KJ - Series II - Low Profile
SHELL STYLE
0 - Wall mounting receptacle
2 - Box mounting receptacle
3 - Wall mounting receptacle (back panel
mounting)
5 - Box mounting receptacle (back panel
mounting)
6 - Straight plug
G6 - Straight plug, grounded
7 - Jam nut receptacle
POLARIZING POSITION
MODIFICATION CODE
Note KJ supplied with exact complement of contacts.
SHELL SIZE
8, 10, 12, 14, 16, 18, 20, 22, and 24.
CONTACT ARRANGMENT
See pages 22 and 23.
HARDWARE FINISH STANDARD
A - Bright cadmium over electroless nickel plate, -
85ºF to + 302ºF (- 65ºC to
CONTACT STYLE
P - Pin
S - Socket
CLASS
E - Environment - resistant with rear accessory
(without strain relief)
F - Environment - resistant with strain relief
acccessory
G - Environmental - resistant wall mount and jam
nut receptacle and plug type. Space Grade.
P - Environment - resistant with straight potting
cup accessory
+ 150ºC)
B - Olive drab cadmium over electroless nickel
plate, - 85ºF to + 347ºF (- 65ºC to + 175˚C)
N - Electroless nickel, - 85ºF to + 392ºF
(-65ºC to + 200ºC)
Z - Zinc Nickel, Black
- - (Dash) When using a finish modification code
POLARIZING POSITION
N (normal), A, B, C, D, see page 21.
MODIFICATION CODE
L -
16 -
Less contacts, not stamped on connector
Outgassed
NASA space graded connector
Clinch Nuts installed
(4-40 Size 9-21)
R - Environment - resistant with full grommet seal
without rear accessory; shell styles 2 and 5
only
T - Environment - resistant (without rear
accessory). (Class T not applicable to KJ2E,
KJ2R, KJ5E and KJ5R.)
17 -
27 -
Outgassed, standard connector
A296 - Black ZInc Cobalt, RoHS Compliant
Dimensions shown in inches (mm)
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
10
38999-Style Series II Connectors*
Wall Mounting Receptacle
KJ0
MS27472-Style
(MS service class E, P, T)
POLARIZING
KEYWAY
.322 (8.17) MAX.
T THREAD
J MAX.
A
DIA.
M
N
P DIA.
.069 (1.74) MAX.
BLUE BAND
(INDICTATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall length With Backshells
P
Shell
Size
8
A
J
M
N
+.005 (0.13)
T
E
F
P
Dia. Max.
Dia. Max.
Max.
T.P
-.010 (0.25)
Thread
Straight
Cable Clamp
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.900 (48.26)
Potting Max.
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
.594 (15.09) .125 (3.18)
.719 (18.26) .125 (3.18)
.812 (20.62) .125 (3.18)
.906 (23.01) .125 (3.18)
.969 (24.61) .125 (3.18)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
.850 (21.59)
10
12
14
16
18
20
22
24
1.001 (25.43) 1.108 (28.14) 1.234 (31.34)
1.126 (28.60) 1.233 (31.32) 1.328 (33.73) 1.062 (26.97) .125 (3.18)
1.251 (31.78) 1.358 (34.49) 1.453 (36.91) 1.156 (27.36) .125 (3.18)
1.376 (34.95) 1.483 (37.67) 1.578 (39.08) 1.250 (31.76) .125 (3.18)
1.501 (38.13) 1.610 (40.89) 1.703 (43.26) 1.375 (34.92) .152 (3.86)
Box Mounting Receptacle
KJ2E
MS27499E-Style
(MS service class E)
L
POLARIZING
KEYWAY
.322 (8.17)
MAX.
J MAX.
G
DIA.
A DIA.
M
N
BLUE BAND
P DIA.
.069 (1.74) MAX.
(INDICTATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: This connector does not accommodate backshells
P
Shell
Size
A
G
J
L
M
N
+.005 (0.13)
Dia. Max.
Dia. Max.
Dia. Max.
Max.
Max.
T.P.
-.010 (0.25)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (27.36)
1.250 (31.75)
1.375 (34.93)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
8
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (26.26)
1.158 (29.41)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.81)
1.578 (40.08)
1.703 (43.26)
10
12
14
16
18
20
22
24
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
11
38999-Style Series II Connectors*
Box Mounting Receptacle
(MS service class E)
.463
(11.76)
MAX.
MS27513E-Style
(MS service class E)
KJ2R
L
POLARIZING
KEYWAY
.322 (8.17)
MAX.
J MAX.
M
N
G
DIA.
A DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
P DIA.
.069
(1.74) MAX.
NOTE: This connector does not accommodate backshells
P
Shell
Size
A
G
J
L
Max.
M
Max.
N
T.P.
+.005 (0.13)
-.010 (0.25)
Dia. Max.
Dia. Max.
Dia. Max.
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.85)
8
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.43)
1.126 (28.60)
1.251 (31.78)
1.376 (33.95)
1.501 (38.13)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (26.26)
1.158 (29.41)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (27.67)
1.610 (40.89)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.312 (7.92)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.34)
1.328 (33.73)
1.453 (36.81)
1.578 (40.08)
1.703 (43.26)
10
12
14
16
18
20
22
24
1.062 (26.97)
1.156 (27.36)
1.250 (31.75)
1.375 (34.93)
Wall Mounting Receptacle
KJ3
MS27497-Style
(MS service class E, P, T)
.142 (3.01)
MAX. PANEL
THICKNESS (including mounting hardware)
.477 (11.35) MAX.
.322 (8.17) MAX.
P DIA.
T THREAD
POLARIZING
KEYWAY
J DIA.
A
DIA.
C
DIA.
N
M
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.069 (1.74) MAX.
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
P
Shell
A
C
M
Max.
N
T.P
+.005 (0.13)
-.010 (0.25)
T
E
F
P
J
Size
Dia. Max.
Thread
Straight
Cable Clamp Potting Max.
Dia. Max.
Dia. Max.
8
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
.563 (14.30) .828 (21.03) .594 (15.09)
.680 (17.27) .954 (24.23) .719 (18.26)
.859 (21.82) 1.047 (26.59) .812 (20.62)
.984 (24.99) 1.141 (28.98) .906 (23.01)
.125 (3.18)
.125 (3.18)
7/16-28UNEF-2A .855 (21.72) 1.570 (39.88) 1.020 (25.91)
9/16-24UNEF-2A .855 (21.72) 1.570 (39.88) 1.020 (25.91)
10
12
14
.125 (3.18) 11/16-24UNEF-2A .855 (21.72) 1.570 (39.88) 1.020 (25.91)
.125 (3.18) 13/16-20UNEF-2A .855 (21.72) 1.780 (45.21) 1.020 (25.91)
.125 (3.18) 15/16-20UNEF-2A .855 (21.72) 1.780 (45.21) 1.020 (25.91)
.125 (3.18) 1-1/16-18UNEF-2A .855 (21.72) 1.780 (45.21) 1.020 (25.91)
.125 (3.18) 1-3/16-18UNEF-2A .855 (21.72) 1.780 (45.21) 1.020 (25.91)
.125 (3.18) 1-5/16-18UNEF-2A .855 (21.72) 1.960 (49.78) 1.020 (25.91)
.152 (3.86) 1-7/16-18UNEF-2A .855 (21.72) 1.960 (49.78) 1.080 (27.43)
16 1.001 (25.43) 1.058 (26.87) 1.108 (28.14) 1.234 (31.34) .969 (24.61)
18 1.126 (28.60) 1.183 (30.05) 1.233 (31.32) 1.328 (33.73) 1.062 (26.97)
20 1.251 (31.78) 1.308 (33.22) 1.358 (34.49) 1.453 (36.91) 1.156 (29.36)
22 1.376 (34.95) 1.433 (36.40) 1.483 (37.67) 1.578 (40.08) 1.250 (31.75)
24 1.501 (38.13) 1.568 (39.83) 1.610 (40.89) 1.703 (43.26) 1.375 (34.93)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
12
38999-Style Series II Connectors*
Box Mounting Receptacle (Back Panel)
(MS service class E)
MS27508E-Style
(MS service class E)
L
KJ5E
.447 (11.35) MAX.
.322 (8.17) MAX.
P DIA.
POLARIZING
KEYWAY
J DIA.
M
N
G
DIA.
C
A
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.069 (1.74) MAX.
K MAX. PANEL THICKNESS (including mounting hardware)
NOTE: This connector does not accommodate backshells
P
Shell
Size
A
M
Max.
N
T.P
+.005 (0.13)
-.010 (0.25)
C
G
J
K
Max.
L
Max.
Dia. Max.
Dia. Max.
Dia. Max.
Dia. Max.
8
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
10
12
14
16
18
20
22
24
Box Mounting Receptacle (Back Panel)
L
No MS part number
KJ5R
POLARIZING
KEYWAY
.447 (11.35) MAX.
P DIA.
.322 (8.17) MAX.
.338
(8.58)
MAX.
.
J DIA.
M
N
G
C
A
DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
.069 (1.74) MAX.
K MAX. PANEL THICKNESS (including mounting hardware)
NOTE: This connector does not accommodate backshells
P
Shell
A
M
N
+.005 (0.13)
C
G
J
K
L
Size
8
Dia. Max.
.474 (12.04)
.591 (15.01)
.751 (19.08)
.876 (22.25)
1.001 (25.42)
1.126 (28.60)
1.251 (31.77)
1.376 (34.95)
1.501 (38.13)
Max.
T.P
-.010 (0.25)
Dia. Max.
Dia. Max.
Dia. Max.
Max.
Max.
.522 (13.26)
.639 (16.23)
.808 (20.52)
.935 (23.75)
1.058 (26.87)
1.183 (30.05)
1.308 (33.22)
1.433 (36.40)
1.568 (39.83)
.421 (10.69)
.542 (13.77)
.667 (16.94)
.791 (20.09)
.916 (23.27)
1.034 (31.34)
1.158 (34.52)
1.283 (32.59)
1.408 (35.76)
.563 (14.30)
.680 (17.27)
.859 (21.82)
.984 (24.99)
1.108 (28.14)
1.233 (31.32)
1.358 (34.49)
1.483 (37.67)
1.610 (40.89)
.147 (3.73)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.152 (3.86)
.179 (4.55)
.179 (4.55)
.169 (4.29)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.185 (4.70)
.828 (21.03)
.954 (24.23)
1.047 (26.59)
1.141 (28.98)
1.234 (31.24)
1.328 (33.73)
1.453 (36.91)
1.578 (40.08)
1.703 (43.66)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
10
12
14
16
18
20
22
24
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
13
38999-Style Series II Connectors*
Straight Plug
KJ6
MS27473-Style
(MS service class E, P, T)
POLARIZING
KEYWAY
T THREAD
A
DIA.
P
DIA.
BLUE BAND
(INDICATES REAR
G DIA.
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
F
Shell
Size
A
G
P
T
E
P
Dia. Max.
Dia. Max.
Dia. Max.
Thread
Straight
Cable Clamp
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.930 (49.02)
Potting Max.
8
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.104 (28.04)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
10
12
14
16
18
20
22
24
Straight Plug Grounded
MS27484-Style
(MS service class E, P, T)
KJG6
POLARIZING
KEYWAY
T THREAD
A
DIA.
P
DIA.
G DIA.
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall Length With Backshells
Shell
A
G
P
T
E
F
P
Size
8
Dia. Max.
.485 (12.32)
.606 (15.39)
.765 (19.43)
.890 (22.61)
1.014 (25.76)
1.140 (28.96)
1.264 (32.11)
1.389 (35.28)
1.514 (38.46)
Dia. Max.
Dia. Max.
Thread
Straight
Cable Clamp
Potting Max.
.749 (19.02)
.858 (21.79)
1.030 (26.16)
1.155 (29.34)
1.280 (32.51)
1.405 (35.69)
1.530 (38.86)
1.640 (40.66)
1.765 (44.83)
.630 (16.00)
.752 (19.10)
.925 (23.50)
1.050 (26.67)
1.172 (29.77)
1.304 (33.12)
1.435 (36.45)
1.560 (39.62)
1.688 (42.88)
7/16-28UNEF-2A
9/16-24UNEF-2A
11/16-24UNEF-2A
13/16-20UNEF-2A
15/16-20UNEF-2A
1-1/16-18UNEF-2A
1-3/16-18UNEF-2A
1-5/16-18UNEF-2A
1-7/16-18UNEF-2A
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.026 (26.06)
1.104 (28.04)
1.555 (39.50)
1.555 (39.50)
1.555 (39.50)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.790 (45.47)
1.930 (49.02)
1.930 (49.02)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.020 (25.91)
1.080 (27.43)
10
12
14
16
18
20
22
24
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Dimensions shown in inches (mm)
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
Specifications and dimensions subject to change
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
14
38999-Style Series II Connectors*
Jam Nut Receptacle
KJ7
MS27474-Style
(MS service class E, P, T)
R
P
.109 (2.77) MAX.
PANEL THICKNESS
POLARIZING
KEYWAY
G
T THREAD
J DIA.
C
D MOUNTING
FLAT
BLUE BAND
(INDICATES REAR
RELEASE COTACT
RETENTION SYSTEM)
V THREAD
S DIA.
.105 (2.66) MAX.
NOTE: For backshell dimensions and configurations, see pages 29 and 31.
Overall length With Backshells
Shell
C
D
G
J
P
R
S
T
V
E
F
P
Size Dia. Max.
Max.
Max.
Max.
Max.
Max. Hex. Dia. Max.
Thread
Thread
Straight Cable Clamp Potting Max.
8
.474 (12.04) .818 (20.78) .145 (3.68) .563 (14.30) .443 (11.25) 1.079 (27.41) 1.381 (35.08)
.591 (15.01) .942 (23.93) .145 (3.68) .680 (17.27) .443 (11.25) 1.205 (30.61) 1.506 (38.25)
.751 (19.08) 1.066 (27.08) .145 (3.68) .859 (21.82) .443 (11.25) 1.329 (33.76) 1.631 (41.43)
.876 (22.25) 1.191 (30.25) .145 (3.68) .984 (24.99) .443 (11.25) 1.455 (36.96) 1.756 (44.60)
7/16-28UNEF-2A
7/8-20UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91)
10
12
14
9/16-24UNEF-2A
1-20UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91)
11/16-24UNEF-2A 1-1/8-18UNEF-2A .840 (21.34) 1.555 (39.50) 1.020 (25.91)
13/16-20UNEF-2A 1-1/4-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91)
16 1.001 (25.43) 1.321 (33.55) .145 (3.68) 1.108 (28.14) .443 (11.25) 1.579 (40.11) 1.944 (49.38) 1-15/16-20UNEF-2A 1-3/8-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91)
18 1.126 (28.60) 1.441 (36.60) .145 (3.68) 1.233 (31.32) .443 (11.25) 1.705 (43.31) 2.022 (51.36) 1-1/16-18UNEF-2A 1-1/2-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91)
20 1.251 (31.78) 1.566 (39.78) .171 (4.34) 1.358 (34.49) .469 (11.91) 1.829 (46.46) 2.147 (54.53) 1-3/16-18UNEF-2A 1-5/8-18UNEF-2A .840 (21.34) 1.790 (45.47) 1.020 (25.91)
22 1.376 (33.95) 1.691 (42.95) .171 (4.34) 1.483 (37.67) .469 (11.91) 2.017 (51.23) 2.271 (57.68) 1-5/16-18UNEF-2A 1-3/4-18UNS-2A .840 (21.34) 1.930 (49.02) 1.020 (25.91)
24 1.501 (38.13) 1.816 (46.13) .171 (4.34) 1.610 (40.89) .469 (11.91) 2.142 (54.41) 2.396 (60.86) 1-7/16-18UNEF-2A 1-7/8-18UNS-2A .860 (21.84)
1.900(48.26) 1.080 (27.43)
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Panel Cutouts
Flange Mounted Receptacle
Jam Nut Receptacle
P +_ .005 (0.13)
4 HOLES
+.000 (0.00)
B
R
(T.P.)
-.010 (0.25)
A
+.010 (0.25)
-.000 (0.00)
A
+.010 (0.25)
-.000 (0.00)
Shell
Size
A
Dia.
P
Dia.
Mfg.
Screw
Shell
Size
A
Dia.
B
Dia.
R
8
.610 (15.49)
.734 (18.64)
.860 (21.84)
.985 (25.02)
1.110 (28.19)
1.234 (31.34)
1.360 (35.54)
1.484 (37.69)
1.611 (40.92)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.125 (3.18)
.152 (3.86)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.93)
#4
#4
#4
#4
#4
#4
#4
#4
#6
8
.885 (22.48)
1.010 (25.65)
1.135 (28.82)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
1.885 (47.88)
.830 (21.08)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
1.835 (46.61)
10
12
14
16
18
20
22
24
10
12
14
16
18
20
22
24
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
15
38999-Style Series III Connectors*
How To Order
Military Nomenclature
F
C
35
A
N
D38999-Style
20
CONNECTOR TYPE
DISCLAIMER: Our facility is not
currently certified by the DLA and this
product is not covered by the QPL/
QML. Mil-Spec part numbers are only
for cross reference to the Commercial
Equivalent.
SHELL STYLE
SERVICE CLASS
(HARDWARE FINISH)
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
CONNECTOR TYPE
CONTACT ARRANGEMENT
D38999-Style Series III
See pages 22, 23.
SHELL STYLE
CONTACT STYLE
D38999/20-Style - Wall mount receptacle
D38999/24-Style - Jam nut receptacle
D38999/26-Style - Straight Plug, Grounded
P - Pin contacts
S - Socket contact
A - Less Pin contacts*
B - Less Socket contact*
SERVICE CLASS
(Hardware Finish)
F - Electroless nickel - 85ºF to +392ºF
(-65ºC to +200ºC)
* Used only when other than power contacts are to
be installed (i,e., shielded, thermocouple, etc.)
G - Electroless nickel plated. Space Grade.
W - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
POLARIZING POSITION
N (normal), A, B, C, D, E. See page 19.
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”.
SHELL SIZE
Military
Designation
A
9
B
C
D
E
F
G
H
J
11 13 15 17 19 21 23 25
Cannon
Designation
KJB
0
T
13
F
35
P
N
L
Cannon Nomenclature
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
SHELL SIZE
CONTACT STYLE
P -Pin contacts
S -Socket contacts
SERIES PREFIX
Cannon
KJA/KJB* - Series III - Scoop proof,
threaded coupling
9
11 13 15 17 19 21 23 25
Designation
Military
Designation
A
B
C
D
E
F
G
H
J
SHELL STYLE
POLARIZING POSITION
N (normal) A, B, C, D, E. See page 19.
0 - Wall mount receptacle
5 - Box mount receptacle*
6 - Straight plug
HARDWARE FINISH
F - Electroless nickel, - 85ºF to +392ºF
(-65ºC to +200ºC)
G - Electroless nickel plated. Space Grade.
W - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
Z - Zinc Nickel, Black
MODIFICATION CODE
L - Less contacts, not stamped on connector
16 - Outgassed
NASA space graded connector
17 - Clinch Nuts installed
(4-40 Size 9-21, 6-32 Size 23-25)
27 - Outgassed, standard connector
A296 Black Zinc Cobalt, RoHS Compliant
7 - Jam nut receptacle
CLASS
T
- Environment-resistant (without
rear accessory)
- - (Dash) When using a finish modification code
* Consult factory for availability
CONTACT ARRANGEMENTS
See pages 22 and 23.
See page 26 for ordering PC Standoff Contacts using
modification codes.
Dimensions shown in inches (mm)
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
16
38999-Style Series III Connectors*
Wall Mount Receptacle
D38999/20-Style
KJA0/KJB0
S
Z
R1
W
MAX.
R2
M
B
V THREAD
THREAD
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
T
4 PLACES
.230 MAX PANEL
THICKNESS (including mounting hardware)
RED BAND
(FULLY MATED
INDICTAOR BAND)
.520 (13.20) MAX
TT 4 PLACES
MS
Shell size
Code
B Thread
Class 2A
(Plated)
M
T
TT
Metric V
Z
S
+.000 (.000)
-.005 (.130)
+.004 (.100)+.004 (.100)
-.002 (.050) -.002 (.050)
Thread
+.005 (.130)
-.010 (.250)
Shell
Size
W
Max.
+_.012 (.300)
R
R
(Plated)
1
2
9
A
B
C
D
E
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.820 (20.83)
.820 (20.83)
.820 (20.83)
.820 (20.83)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.438 (36.53)
1.562 (39.67)
1.688 (42.88)
1.812 (46.02)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.154 (3.91)
.216 (5.49)
.194 (4.93)
.194 (4.93)
.173 (4.39)
.194 (4.93)
.194 (4.93)
.194 (4.93)
.242 (6.15)
.242 (6.15)
M12X1-6g0.100R .098 (2.50) 1.235 (31.36)
M15X1-6g0.100R .098 (2.50) 1.235 (31.36)
M18X1-6g0.100R .098 (2.50) 1.235 (31.36)
M22X1-6g0.100R .098 (2.50) 1.235 (31.36)
M25X1-6g0.100R .098 (2.50) 1.235 (31.36)
M28X1-6g0.100R .098 (2.50) 1.235 (31.36)
M31X1-6g0.100R .126 (3.20) 1.235 (31.36)
M34X1-6g0.100R .126 (3.20) 1.235 (31.36)
M37X1-6g0.100R .126 (3.20) 1.235 (31.36)
11
13
15
17
19
21
23
25
.820 (20.83) 1.062 (26.97)
.820 (20.83) 1.156 (29.36)
.790 (20.07) 1.250 (31.75)
.790 (20.07) 1.375 (34.92)
.790 (20.07) 1.500 (38.10)
F
G
H
J
Straight Plug Grounded
D38999/26-Style
KJA6/KJB6
L
W
Q
D THREAD
B
K
V THREAD
BLUE BAND
.244 (6.20)+.012 (0.30)
-.000 (0.00)
(INDICATES REAR
.185 (4.70) +_ .016 (0.40)
RELEASE CONTACT
RETENTION SYSTEMS
MS
Shell size
Code
B
D Thread
Class 2B
(Plated)
W
Metric V
Thread
(Plated)
+.008 (.200)
-.000 (.000)
+.008 (.200)
-.004 (.100)
Shell
Size
K
Max.
L
Q
Max.
Dia Max.
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
9
A
B
C
D
E
.724 (18.40)
.831 (21.10)
1.000 (25.40)
1.130 (28.70)
1.268 (32.20)
1.374 (34.90)
1.500 (38.10)
1.618 (41.40)
1.744 (44.30)
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.748 (19.00)
.862 (21.90)
1.027 (26.10)
1.153 (29.30)
1.291 (32.80)
1.398 (35.50)
1.524 (38.70)
1.642 (41.70)
1.768 (44.90)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
1.234 (31.34)
.859 (21.82)
.969 (24.61)
1.141 (28.98)
1.266 (32.16)
1.391 (35.53)
1.500 (38.10)
1.625 (41.28)
1.750 (44.45)
1.875 (47.62)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
.760 (19.30)
11
13
15
17
19
21
23
25
F
G
H
J
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
17
38999-Style Series III Connectors*
Jam Nut Receptacle
D38999/24-Style
KJA7/KJB7
Z
M
A
S
P
BLUE BAND
B
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
THREAD
C
S
FLAT
V THREAD
R THREAD
.520 (13.2) MAX.
.062 (1.57) MIN./.125 (3.18) MAX.
PANEL THICKNESS
RED BAND
(FULLY MATED
INDICATOR BAND)
MS
A
B Thread
C
Z
M
P
Metric R
Thread
Metric V
Shell size +.010 (.250)
Class 2A
(Plated)
+.004 (.100) +.005 (.130) +.005 (.130) +.016 (.410)
-.010 (.250) -.040 (.100) -.004 (.100) -.004 (.100)
Thread
Shell
Size
Code
-.005 (.130)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.104 (2.64)
.135 (3.43)
.135 (3.43)
.135 (3.43)
.135 (3.43)
(Plated)
(Plated)
S
9
A
B
C
D
E
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
.651 (16.53)
.751 (19.07)
.938 (23.82)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
1.243 (31.57)
M17X1-6g0.100R
M20X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M32X1-6g0.100R
M35X1-6g0.100R
M38X1-6g0.100R
M41X1-6g0.100R
M44X1-6g0.100R
M12X1-6g0.100R
M15X1-6g0.100R
M18X1-6g0.100R
M22X1-6g0.100R
M25X1-6g0.100R
M28X1-6g0.100R
M31X1-6g0.100R
M34X1-6g0.100R
M37X1-6g0.100R
.871 (22.12)
.871 (22.12)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.878 (22.30)
.555 (14.10)
.555 (14.10)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
.563 (14.30)
1.062 (26.97)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
1.625 (41.28)
1.812 (46.02)
1.938 (49.23)
2.062 (52.37)
2.188 (55.38)
11
13
15
17
19
21
23
25
1.0000-0.1P-0.3L-TS 1.062 (26.97)
1.1875-0.1P-0.3L-TS 1.187 (30.15)
1.2500-0.1P-0.3L-TS 1.312 (33.32)
1.3750-0.1P-0.3L-TS 1.437 (36.50)
1.5000-0.1P-0.3L-TS 1.562 (39.67)
1.6250-0.1P-0.3L-TS 1.687 (42.85)
F
G
H
J
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Panel Cutouts
Wall Mounted Receptacle
Jam Nut Receptacle
A
B
A
B
Shell
Size
R
ØT
+±.ꢀ. (±20)
+±... (±..)*
-±.ꢀ. (±20)
ØHꢀ
ØH2
(TP)
± ±.0. (±ꢀ1)
-±... (±..)
(Min±)
(Min±)
.656 (16.66)
.796 (20.22)
.922 (23.42)
1.047 (26.59)
1.219 (30.96)
1.297 (32.94)
1.422 (36.12)
1.547 (39.29)
1.672 (42.47)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (391)
.150 (3.81)
.657 (16.70)
.771 (19.58)
.955 (24.26)
1.085 (27.56)
1.210 (30.73)
1.335 (33.91)
1.460 (37.08)
1.585 (40.26)
1.710 (43.43)
.516 (13.11)
.625 (15.88)
.750 (19.05)
.906 (23.01)
1.016 (25.81)
1.141 (28.98)
1.266 (36.16)
1.375 (34.92)
1.484 (37.69)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
1.500 (38.10)
.693 (17.6)
.825 (20.96)
1.010 (25.65)
1.135 (28.83)
1.260 (32.00)
1.385 (35.18)
1.510 (38.35)
1.635 (41.53)
1.760 (44.70)
9
11
13
15
17
19
21
23
25
* For Dimension B, Shell Size 9 only, tolerance is .004 (.10)
Dimensions shown in inches (mm)
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
18
38999-Style Series III Composite Connectors*
How To Order
Military Nomenclature
D38999-Style
20
M
C
35
A
N
CONNECTOR TYPE
SHELL STYLE
DISCLAIMER:Our facility is not currently
certified by the DLA and this product is not
covered by the QPL/QML. Mil-Spec part
numbers are only for cross reference to
the Commercial Equivalent.
SERVICE CLASS
(HARDWARE FINISH)
SHELL SIZE
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
CONNECTOR TYPE
CONTACT ARRANGEMENT
D38999/ - 38999-Style Series III
See pages 22, 23.
SHELL STYLE
CONTACT STYLE
D38999/20 - Wall mount receptacle
D38999/26 - Straight Plug, Grounded
H - Pin conatcts (1500 cycle)
J - Socket contacts (1500 cycle)
P - Pin conatcts
SERVICE CLASS
S - Socket contact
A - Less Pin contacts*
B - Less Socket contact*
(Hardware Finish)
J - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
M - Electroless nickel - 85ºF to +392ºF
(-65ºC to +200ºC), RoHS Compliant
* Used only when other than power contacts are to
be installed (i,e., shielded, thermocouple, etc.)
POLARIZING POSITION
N (normal), A, B, C, D, E. See page 21.
SHELL SIZE
Military
Note: To order MS connectors less standard power
contacts, purchase order must state “Less Contacts”.
Designation
A
9
B
C
D
E
F
G
H
J
11 13 15 17 19 21 23 25
Cannon
Designation
KJB
0
T
13
M
35
P
N
L
Cannon Nomenclature
SERIES PREFIX
SHELL STYLE
CLASS
SHELL SIZE
HARDWARE FINISH
CONTACT ARRANGEMENT
CONTACT STYLE
POLARIZING POSITION
MODIFICATION CODE
SHELL SIZE
CONTACT STYLE
H - Pin conatcts (1500 cycle)
J - Socket contacts (1500 cycle)
P - Pin contacts
SERIES PREFIX
Cannon
KJB* - Series III - Scoop proof,
threaded coupling
9
11 13 15 17 19 21 23 25
Designation
Military
Designation
A
B
C
D
E
F
G
H
J
S - Socket contacts
SHELL STYLE
0 - Wall mount receptacle
6 - Straight plug
HARDWARE FINISH
POLARIZING POSITION
N (normal) A, B, C, D, E. See page 21.
J - Olive drab cadmium over electroless nickel
plate, -85ºF to +347ºF (-65ºC to +175ºC)
M - Electroless nickel, - 85ºF to +392ºF
(-65ºC to +200ºC), RoHS Compliant
CLASS
T
- Environment-resistant (without
MODIFICATION CODE
L - Less contacts, not stamped on connector
rear accessory)
* Consult factory for availability
CONTACT ARRANGEMENTS
See pages 22 and 23.
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
19
38999-Style Series III Composite Connectors*
Wall Mount Receptacle
D38999/20-Style
KJB0T
S
Z
R1
W
MAX.
R2
M
B
V THREAD
THREAD
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEM)
T
4 PLACES
.230 MAX PANEL
THICKNESS (including mounting hardware)
RED BAND
(FULLY MATED
INDICTAOR BAND)
.520 (13.20) MAX
TT 4 PLACES
MS
Shell size
Code
B Thread
Class 2A
(Plated)
M
T
TT
Metric V
Thread
(Plated)
Z
S
+.000 (.000)
-.005 (.130)
+.004 (.100)+.004 (.100)
-.002 (.050) -.002 (.050)
+.005 (.130)
-.010 (.250)
Shell
Size
W
Max.
+_.012 (.300)
R
R
2
1
9
A
B
C
D
E
.6250-0.1P-0.3L-TS
.7500-0.1P-0.3L-TS
.8750-0.1P-0.3L-TS
1.0000-0.1P-0.3L-TS
1.1875-0.1P-0.3L-TS
1.2500-0.1P-0.3L-TS
1.3750-0.1P-0.3L-TS
1.5000-0.1P-0.3L-TS
1.6250-0.1P-0.3L-TS
.768 (19.50)
.768 (19.50)
.768 (19.50)
.768 (19.50)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
.594 (15.09)
.719 (18.26)
.812 (20.62)
.906 (23.01)
.969 (24.61)
1.062 (26.97)
1.156 (29.36)
1.250 (31.75)
1.375 (34.92)
.938 (23.83)
1.031 (26.19)
1.125 (28.58)
1.219 (30.96)
1.312 (33.32)
1.438 (36.53)
1.562 (39.67)
1.688 (42.88)
1.812 (46.02)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.128 (3.25)
.154 (3.91)
.154 (3.91)
.216 (5.49)
.194 (4.93)
.194 (4.93)
.173 (4.39)
.194 (4.93)
.194 (4.93)
.194 (4.93)
.242 (6.15)
.242 (6.15)
M12X1-6g0.100R .143 (3.63) 1.255 (32.00)
M15X1-6g0.100R .143 (3.63) 1.255 (32.00)
M18X1-6g0.100R .143 (3.63) 1.255 (32.00)
M22X1-6g0.100R .143 (3.63) 1.255 (32.00)
M25X1-6g0.100R .143 (3.63) 1.255 (32.00)
M28X1-6g0.100R .143 (3.63) 1.255 (32.00)
M31X1-6g0.100R .171 (4.35) 1.255 (32.00)
M34X1-6g0.100R .171 (4.35) 1.255 (32.00)
M37X1-6g0.100R .171 (4.35) 1.255 (32.00)
11
13
15
17
19
21
23
25
.768 (19.50) 1.062 (26.97)
.768 (19.50) 1.156 (29.36)
.736 (18.70) 1.250 (31.75)
.736 (18.70) 1.375 (34.92)
.736 (18.70) 1.500 (38.10)
F
G
H
J
Straight Plug Grounded
D38999/26-Style
KJB6T
L
Q
D THREAD
B
V THREAD
BLUE BAND
(INDICATES REAR
RELEASE CONTACT
RETENTION SYSTEMS
MS
B
Shell size
+.008 (.200)
-.000 (.000)
Shell
Size
L
Q
Code
Max.
Dia Max.
9
A
B
C
D
E
.811 (20.6)
.929 (23.6)
1.11 (28.2)
1.23 (31.3)
1.35 (34.5)
1.46 (37.3)
1.59 (40.5)
1.72 (43.7)
1.84 (46.8)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
.858 (21.8)
.984 (25.0)
1.157 (29.4)
1.27 (32.5)
1.40 (35.7)
1.51 (38.5)
1.64 (41.7)
1.76 (44.9)
1.88 (48.0)
11
13
15
17
19
21
23
25
F
G
H
J
Performance Specifications-Pages 3 and 4.
Contacts, Sealing Plugs, Assembly Tools - Pages 24, 31, and 32.
Contact Arrangements - Pages 22 and 23.
Dimensions shown in inches (mm)
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
20
38999-Style Series I, II, III Connectors*
Polarizing Positions
Series I
Angle of Rotation (Degrees)
C
Shell
Size
Normal
A
B
C
D
D
9
95º
95º
95º
95º
95º
95º
95º
95º
95º
77º
81º
75º
74º
77º
77º
77º
80º
80º
113º
109º
115º
116º
113º
113º
113º
110º
110º
123º
127º
129º
125º
125º
125º
121º
121º
11
13
15
17
19
21
23
25
67º
63º
61º
65º
65º
65º
69º
69º
N
B
A
5º
REF
Front face of receptacle (plug opposite). Insert
arrangement does not rotate with main key-keyway.
The master key is rotated to provide shell polar-
ization; the minor keys remain fixed.
Angle of Rotation (Degrees)
Series II
Shell Size
Normal
A
B
C
C
D
D
8
100º
100º
100º
100º
100º
100º
100º
100º
100º
82º
86º
80º
79º
82º
82º
82º
85º
85º
118º
114º
120º
121º
118º
118º
118º
115º
115º
10
12
14
16
18
20
22
24
72º
68º
66º
70º
70º
70º
74º
74º
128º
132º
134º
130º
130º
130º
126º
126º
N
B
A
10º
REF
Front face of receptacle (plug opposite). Insert
arrangement does not rotate with main key-keyway.
The master key is rotated to provide shell polar-
ization; the minor keys remain fixed.
Key &
Keyway
Arrangement
identifi-
cation
Series III
Key Locations
RECEPTACLE
(Front face shown)
ARº
or
APº
BSC
BRº
or
BPº
BSC
CRº
or
CPº
BSC
DRº
or
DPº
BSC
Shell
Size
Letter
N
A
B
C
D
E
105
102
80
140
132
118
140
155
131
141
156
145
156
146
141
142
170
169
140
145
153
142
170
169
140
145
153
215
248
230
205
234
197
208
182
195
220
176
184
196
200
200
200
180
197
196
200
200
200
180
197
265
320
312
275
304
240
236
292
252
255
298
242
293
310
244
257
280
272
293
310
244
257
280
272
MAIN
KEYWAY
AR˚
BSC
9
35
BR˚
BSC
64
DR˚
BSC
91
CR˚
BSC
N
A
B
C
D
E
95
11
13
113
90
PLUG
(Front face shown)
and
15
53
119
51
MAIN
KEY
AP˚
BSC
N
A
B
C
D
E
80
17
and
19
135
49
BP˚
BSC
DP˚
BSC
66
62
CP˚
BSC
79
NOTES
N
A
B
C
D
E
80
1. All Angles are BSC
2. The insert arrangement does not rotate with
main key/keyway
3. All minor keys are rotated to provide shell
polarization, the master key remains fixed at
twelve o’clock position.
21
23
135
49
and
25
66
62
79
4. Polarization is different from
Series I and II.
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
21
38999-Style Series I, II, III Connectors*
Contact Arrangements (Engaging View Pin Insert)
*
Socket insert only
Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E
** Pin insert only (Not available in socket insert Series I and III)
† Consult factory MS27505E/KJL5E insert availability
Series III
9-98
8-98†
9-98
3 #20
I
9-35
8-35†
9-35
-
11-5
10-5†
11-5
5 #20
I
11-98
-
11-35
10-35†
11-35
13 #22D
M
-
12-3
-
-
13-8
12-8†
13-8
8 #20
I
Series II
-
11-4
4 #20
I
10-98†
11-98
6 #20
I
10-99†
11-99
7 #20
I
12-4†
13-4**
4 #16
I
Series I
No. of Contacts
Service Ratings
6 #22D
M
3 #16
II
13-98
12-98†
13-98
10 #20
I
13-35
12-35†
13-35
15-5
14-5†
15-5
5 #16
II
15-15
14-15†
15-15
14 #20,1 #16
I
15-18
14-18†
15-18
18 #20
I
15-19
15-35
Series III
-
14-35†
15-35
37 #22D
M
Series II
15-19
19 #20
I
Series I
No. of Contacts
Service Ratings
22 #22D
M
21
42
31
_
Series III
15-97
14-97†
15-97
17-6
16-6
17-6
6 #12
17-8
17-26
16-26†
17-26
26 #20
I
17-35
16-35†
17-35
55 #22D
M
-
16-99†
17-99**
21 #20,2 #16
I
16-42†
_
Series II
16-8†
17-8
8 #16
II
42 #22
M
Series I
No. of Contacts
Service Ratings
8 #20,4 #16
I
I
Series III
-
18-28
-
18-30
19-11
18-11
19-11
11 #16
II
19-32
18-32†
19-32
32 #20
I
19-35
18-35†
19-35
66 #22D
M
Series II
Series I
No. of Contacts
Service Ratings
19-28**
26 #20,2 #16
I
19-30**
29 #20, 1 #16
I
21-11
21-16
20-16†
21-16
16 #16
II
21-35
20-35†
21-35
79 #22D
M
21-39
20-39†
21-39
21-41
20-41†
21-41
41- #20
I
Series III
-
Series II
21-11
11 #12
I
Series I
37 #20,2 #16
No. of Contacts
Service Ratings
I
23-35
22-35†
23-35
100 #22D
Series III
21-75
23-21
22-21
23-21
21 #16
II
-
Series II
-
21-75*•
4 #8 Twinax
M
22-32
23-32**
32 #20
I
Series I
No. of Contacts
Service Ratings
M
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
Dimensions shown in inches (mm)
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
22
38999-Style Series I, II, III Connectors*
Contact Arrangements (Engaging View Pin Insert)
*
Socket insert only
ꢀ† Indicates layouts are available in all shell styles including MS27499, MS27508, KJ2E and KJ5E
** Pin insert only (Not available in socket insert Series I and III
• Consult factory for MS27505E/KJL5E insert availability
II
Dimensions shown in inches (mm)
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Specifications and dimensions subject to change
www.ittcannon.com
23
38999-Style Series I, II, III Connectors*
Contacts-Pin (Series I/II/III)
MIL-C-39029/58
Color
Bands
2
AS39029
Military
Contact
Size
22D
20
Cannon
1st BAND (WIDE)
1
3
Part Number
Part Number
2nd BAND (NARROW)
3rd BAND (NARROW)
Orange
Orange
Orange
Orange
980-0008-878
980-0008-879
980-0008-880
980-0008-881
AS39029/58-360
AS39029/58-363
AS39029/58-364
AS39029/58-365
Blue
Blue
Blue
Blue
Black
Orange
Yellow
Green
16
12
MIL-C-39029/107
H Contacts (1500 Cycle)
Color
Bands
2
AS39029
Military
Part Number
Contact
Size
Cannon
Part Number
1
3
22D
20
Blue
Blue
Blue
Blue
980-0010-032
980-0010-033
980-0010-034
980-0010-035
AS39029/107-620
AS39029/107-621
AS39029/107-622
AS39029/107-623
Red
Red
Red
Red
Black
Brown
Red
16
12
Orange
Contact
Size
Cable
Accomodations
Cannon
Part Number
8 Coax
249-2196-000
249-2196-001
249-2196-002
980-1000-012
980-1000-016
95 Ohms
75 Ohms
RG-180
RG-174, 179, 316
RG-142
8 Twinax
12 Coax
M17/176-00002
RG-174, 179, 316
Contacts-Socket (Series II)
MIL-C-39029/57
KJ
Color
AS39029
Military
Contact
Bands
Cannon
Manufacture identification
Code Area - Typical all contacts
1
Size
22D
20
2
Part Number
Part Number
3
Orange
Orange
Orange
Orange
Green
Green
Green
Green
980-0008-874
980-0008-875
980-0008-876
980-0008-877
AS39029/57-354
AS39029/57-357
AS39029/57-358
AS39029/57-359
Yellow
Violet
Gray
16
12
White
Contacts-Socket (Series I & III)
MIL-C-39029/56
Color
Bands
2
AS39029
Military
Part Number
Contact
Cannon
Part Number
1st BAND (WIDE)
2nd BAND (NARROW)
3rd BAND (NARROW)
1
Size
22D
20
3
Orange
Orange
Orange
Orange
Yellow
Green
Green
Green
980-0008-870
980-0008-871
980-0008-872
980-0008-873
AS39029/56-348
AS39029/56-351
AS39029/56-352
AS39029/56-353
Gray
Brown
Red
16
12
Orange
MIL-C-39029/106
J Contacts (1500 Cycle)
Color
Bands
2
AS39029
Military
Part Number
Contact
Size
Cannon
Part Number
1
3
22D
20
Blue
Blue
Blue
Blue
Brown
Brown
Brown
Brown
980-0008-993
980-0008-994
980-0008-995
980-0008-996
AS39029/106-614
AS39029/106-615
AS39029/106-616
AS39029/106-617
Yellow
Green
Blue
16
12
Violet
Contact
Size
Cable
Accomodations
Cannon
Part Number
8 Coax
95 Ohms
75 Ohms
249-2195-000
249-2195-001
249-2195-002
980-1000-013
980-1000-015
RG-180
RG-174, 179, 316
RG-142
8 Twinax
12 Coax
M17/176-00002
RG-174, 179, 316
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
24
38999-Style Series I, II, III Connectors*
Contacts-Printed Circuit Board
PIN PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
D38999/24-Style
MS27466
MS27467
KJLꢀ
MS27656
MS27468
KJL3 / KJL7
MS275ꢀ5E
KJL5E
MS27513E
MS27497 / NO MS
KJ2R / KJ3 / KJ5R
D38999/24-Style
MS27472
MS27474
KJ0 / KJ7
MS27499E
MS27508E
KJ2E / KJ5E
D38999/20-Style
KJB0
KJA0
PC CONTACT
PART NUMBER
CONTACT
SIZE
TAIL DIA.
.ꢀꢀ0
KJA7 (19-25)
KJA7 (9-17)
0.408
0.376
0.216
0.184
0.363
0.331
0.440
0.408
0.313
0.281
0.428*
0.396*
0.511
0.479
0.425
0.393
0.261
0.189
0.069
N/A
0.216
0.144
0.293
0.221
0.166
0.094
0.281
0.209
0.364
0.292
0.278
0.206
0.262
0.200
0.280
0.216
0.088
0.024
0.235
0.171
0.312
0.248
0.185
0.121
0.300
0.236
0.383
0.319
0.297
0.233
0.258
0.198
0.264
0.226
0.408
0.376
0.264
0.226
0.244
0.176
030-2097-002
030-2097-006
0.020
0.020
22D
0.052
0.070
0.008
0.217
0.155
0.294
0.232
0.167
0.105
0.282
0.220
0.365
0.303
0.279
0.217
0.066
0.006
0.213
0.153
0.290
0.230
0.163
0.103
0.278
0.218
0.361
0.301
0.275
0.215
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.216
0.184
0.363
0.331
0.440
0.408
0.313
0.281
0.428*
0.396*
0.511
0.479
0.425
0.393
0.072
0.034
0.219
0.181
0.296
0.258
0.169
0.131
0.284
0.246
0.367
0.329
0.281
0.243
22D
22D
22D
20
N/A
0.199
0.131
030-2097-008
030-2097-015
0.020
0.020
0.276
0.208
0.149
0.081
0.264
0.196
0.347
0.279
0.261
0.193
030-1997-006
030-1997-022
0.025
0.025
20
20
16
030-1997-030
030-1995-023
0.019
0.062
0.062
0.281
0.243
0.121
0.083
0.118
0.046
0.101
0.033
0.265
0.233
0.121
0.083
0.119
0.057
0.137
0.073
0.115
0.055
0.265
0.233
16
030-1995-024
PC CONTACT
EXTENSION
G (SEE NOTE 5)
PC CONTACT
EXTENSION
(KJL5E & KJ0/2E/2R/3/5E/5R/7)
(KJL0/3/7 & KJA0/7)
SOCKET (SERIES II) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
MS27472
MS27474
KJꢀ / KJ7
MS27499E
MS275ꢀ8E
KJ2E / KJ5E
MS27503E
MS27497 / NO MS
KJ2R / KJ3 / KJ5R
TAIL DIA.
.ꢀꢀ0
PC CONTACT
PART NUMBER
CONTACT
SIZE
0.179
0.141
0.109
0.071
0.217
0.179
0.323
0.291
0.253
0.221
0.361
0.329
0.179
0.141
0.109
0.071
0.217
0.179
031-1186-006
22D
22D
22D
0.020
0.020
0.020
031-1186-011
031-1186-013
0.262
0.224
0.406
0.374
0.262
0.224
031-1186-021
031-1124-021
22D
20
0.020
0.025
0.247
0.209
0.391*
0.359*
0.247
0.209
0.101
0.063
0.245
0.213
0.101
0.063
031-1123-007
16
0.062
SOCKET (SERIE I & III) PRINTED CIRCUIT CONTACT EXTENSION FROM REAR OF CONNECTOR (MAX / MIN)
D38999/24-Style
D38999/20-Style
MS27656
MS27468
KJL3 / KJL7
MS27505E
KJL5E
D38999/24-Style
MS27466
MS27467
KJLꢀ
PC CONTACT
PART NUMBER
CONTACT
SIZE
KJB0
KJA0
TAIL DIA.
.ꢀꢀ0
KJA7 (9-17)
KJA7 (19-25)
0.244
0.172
0.168
0.096
0.438
0.366
0.227
0.159
0.151
0.083
0.421
0.353
0.391*
0.359*
0.315*
0.283*
0.585*
0.553*
0.245
0.183
0.169
0.107
0.439
0.377
0.263
0.199
0.187
0.123
0.457
0.393
0.241
0.181
0.165
0.105
0.435
0.375
031-1147-014
031-1147-039
031-1147-040
031-1124-040
22D
22D
22D
20
0.020
0.020
0.020
0.025
0.633
0.601
0.487
0.425
0.483
0.423
0.486
0.414
0.469
0.401
0.505
0.441
0.272
0.200
0.255
0.187
0.419
0.387
0.273
0.211
0.291
0.227
0.269
0.209
031-1123-020
16
0.029
NOTES: UNLESS OTHERWISE SPECIFIED.
1. PC CONTACTS HAVE GOLD PLATING OVER SUITABLE UNDERPLATE PER MIL-C-39029 SPECIFICATION.
2. PC CONTACT EXTENSIONS APPLY TO ITT CANNON CONNECTORS ONLY FOR ALL SHELL SIZES.
3. N/A INDICATES NO EXTENSION.
4. * INDICATES PC TAIL WITH STEP EXTENDING FROM REAR OF CONNECTOR.
5. G DIM. IS .031 +/- .016 FOR KJL5E AND .120 +/- .030 (SHELL SIZES 8 THRU 22)
AND .090 +/- .050 (SHELL SIZE 24) FOR KJ0/2E/2R/3/5E/5R/7.
6. FOR OTHER SPECIFIC PC CONTACT DATA, CONSULT ITT EC, SANTA ANA, CA, USA.
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
25
38999-Style Series III Connectors*
38999-Style Series III Modification Codes: PC Standoff Contacts installed
HOW TO ORDER
Modification
Code
Definition
Untinned PC contacts with extensions E & E1
Lead tinned PC contacts with extensions E & E1
Lead-free tinned PC contacts with extensions E & E1
Untinned PC contacts with extensions E & E2
Lead tinned PC contacts with extensions E & E2
Lead-free tinned PC contacts with extensions E & E2
100
101
102
103
104
105
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is
not covered by the QPL/QML. Mil-Spec part numbers are only for cross reference
to the Commercial Equivalent.
KJB Wall Mount with
PC Standoff Contacts installed
E1/E2
UNTINNED, LEAD TINNED
E1/E2
OR LEAD-FREE TINNED
UNTINNED, LEAD TINNED
OR LEAD-FREE TINNED
MAXIMUM AREA
MAXIMUM AREA
E
E
B
B
A
A
PANEL REF.
PANEL REF.
KJB0 WALL MOUNT
KJB7 JAM NUT
Contact
Style
KJB7T (Jam Nut)
9 to 25
KJB0T (Wall Mount)
9 to 19
KJB0T (Wall Mount)
21 to 25
Contact
Size
Dimension
ØA Max.
ØB Min.
E
.028 (.71)
.392 / .436 (9.96 / 11.07)
.611 / .671 (15.52 / 17.04)
.749 / .809 (19.02 / 20.54)
.392 / .436 (9.96 / 11.07)
.611 / .671 (15.52 / 17.04)
.749 / .809 (19.02 / 20.54)
.459 / .503 (11.66 / 12.78)
.687 / .738 (17.22 / 18.75)
.816 / .876 (20.72 / 22.25)
.459 / .503 (11.66 / 12.78)
.687 / .738 (17.22 / 18.75)
.816 / .876 (20.72 / 22.25)
.489 / .533 (12.42 / 13.54)
.708 / .768 (17.98 / 19.51)
.846 / .906 (21.48 / 23.01)
.489 / .533 (12.42 / 13.54)
.708 / .768 (17.98 / 19.51)
.846 / .906 (21.48 / 23.01
22D
.044 (1.12)
E1
E2
E
.036 (.91)
P
20
.052 (1.32)
.084 (2.13)
.068 (1.73)
16
E1
E2
S
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
26
38999-Style Series I, II, III Connectors*
Contact Sealing Bushings
Size 8 Twinax Sealing Bushing
321-1035-000
Used with the Twinax contact in Twinax layouts for sealing cable size M17/176-00002
Size 8 Coax Sealing Bushing
321-1034-001
Used with the Coax contact in Twinax layouts for sealing cable size RG-180
Twinax Grommet
Coax Grommet
Contact Sealing Bushing Sequence into Twinax Grommet
(Bushing only used with Twinax grommet)
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
27
38999-Style Series I, II, III Connectors
Wire Sizes and Diameters
Finished wire outside dimensions
Wire
size (AWG)
Contact
Size
Minimum
Maximum
28, 26, 24, 22
0.054
22D
22M*
22*
0.030
0.030
0.034
0.040
0.065
0.097
0.136
0.124
0.094
28, 26, 24
26, 24, 22
0.050
0.060
0.083
0.109
0.142
0.146
0.134
0.102
24, 22, 20
20
20, 18, 16
16
14, 12
12
RG-180
8 Coax
8 Twinax
12 Coax
M17/176-00002
RG174, 179, 316
*For reference only
Recommended Jam Nut Torque Values
Series II
Series I & III
Shell
Size
8
Inch-
Shell
Size
Inch-
Pounds
Pounds
30/36
40/46
46/50
55/60
9
10
12
14
16
18
20
22
24
11
13
15
17
19
21
23
25
55/60
70/75
70/75
80/85
80/85
90/95
90/95
100/110
110/120
120/130
140/150
100/110
110/120
120/130
Coupling Nut Torque Values (Series I, II and III)
Maximum engagement and
disengagement
Minimum
disengagement
Shell
Inch
Inch
Pound
Size
Pound
8
8
2
2
2
2
2
2
4
3
4
3
5
3
6
5
7
5
7
5
9
8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
12
12
16
16
20
20
24
24
28
28
32
32
36
36
36
40
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
28
38999-Style Series I, II Connectors*
Backshell - Type E (Straight), Series II only
Shell Size
Series II
8
A Dia. Max.
.580 (14.73)
.705 (17.91)
.830 (21.08)
.955 (24.26)
1.080 (27.32)
1.205 (30.61)
.330 (33.78)
1.455 (36.96)
1.555 (39.50)
B Dia. Max.
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.328 (8.33)
.270 (6.86)
B
10
12
A
DIA.
14
16
18
20
22
24
How To Order
Shell Size
Finishes
A
B
C
N
Series
II
Cadmium/Nickel-Clear
Part Number
Cadmium/Nickel-O.D
Part Number
Anodic Non-Cond.
Part Number
Electroless Nickel
Part Number
8
057-0776-000
057-0777-000
057-0778-000
057-0779-000
057-0780-000
057-0781-000
057-0782-000
057-0783-000
057-0784-000
057-0862-000
057-0863-000
057-0864-000
057-0846-000
057-0847-000
057-0848-000
057-0849-000
057-0850-000
057-0851-000
057-0819-000
057-0820-000
057-0821-000
057-0822-000
057-0823-000
057-0824-000
057-0825-000
057-0826-000
057-0827-000
057-0776-002
057-0777-002
057-0778-002
057-0779-002
057-0780-002
057-0781-002
057-0782-002
057-0783-002
057-0784-002
10
12
14
16
18
20
22
24
Backshell - Type F (Cable Clamp)
Z.
Shell Size
Series Series
A
DIA.
1
N
I
II
A Max.
.508 (14.73)
.705 (17.91)
.830 (21.08)
.955 (24.26)
1.080 (27.43)
1.205 (30.61)
1.330 (33.78)
1.455 (36.96)
1.555 (39.50)
N Dia. Max.
.135 (3.43)
.198 (5.03)
.322 (7.18)
.385 (9.78)
.510 (12.95)
.635 (16.13)
.635 (16.13)
.760 (19.30)
.810 (20.57)
X Dia. Min.
.234 (5.94)
X Dia. Min.
Y Max.
Z Max.
9
8
.187 (4.75)
.187 (4.75)
.281 (7.14)
.325 (8.26)
.356 (9.04)
.456 (11.58)
.519 (13.18)
.519 (13.18)
.657 (16.69)
.829 (21.06)
.891 (22.63)
1.016 (25.81)
1.141 (28.98)
1.203 (30.56)
1.469 (37.31)
1.469 (37.31)
1.656 (42.06)
1.750 (44.45)
.813 (20.65)
.813 (20.65)
.813 (20.65)
.813 (20.65)
.933 (23.70)
.933 (23.70)
.933 (23.70)
.933 (23.70)
.893 (22.68)
11
13
15
17
19
21
23
25
10
12
14
16
18
20
22
24
.297 (7.54)
.422 (10.72)
.547 (12.89)
.609 (15.47)
.734 (18.64)
.734 (18.64)
.922 (23.42)
.984 (24.99)
X
Y
1
X
How To Order (MS Version)
MS27506
Finishes
Shell Size
-
A - 8 - 2
A
B
N
F
Series Series
MS
Cannon
Military Designation
MS27506 Type F Straight
with Cable Clamp
I
II
Part Number Part Number
Cannon
MS
A
Cannon
MS
Cannon
-015
MS
F
9
11
13
15
17
19
21
23
25
8
10
12
14
16
18
20
22
24
27506-*8-2
057-3005-***
057-3006-***
057-3007-***
057-3008-***
057-3009-***
057-3010-***
057-3011-***
057-3012-***
057-3013-***
-012
-013
-012
-013
-011
-013
-014
-013
-016
-014
B
27506-*10-2
27506-*12-2
27506-*14-2
27506-*16-2
27506-*18-2
27506-*20-2
27506-*22-2
27506-*24-2
*** Cannon Finish
-011
-012
-010
-012
-013
-011
-015
-013
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
-014
-015
-013
-015
-016
-015
-018
-017
F
F
F
F
F
F
F
F
Finish
A - Cad/Nickel (Clear)
B - Cad/Nickel (O.D)
F - Nickel (Electroless)
Shell Size
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20, 22, 24
Adapter
Geometry - 2
* MS Finish
*DISCLAIMER:Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
29
38999-Style Series III Connectors*
Backshell Series III
M85049/
Military Designator
Type
38
S
9
W
Straight Cable Clamp
90° with Cable Clamp
38
39
Configuration
Self Locking
S
Nonself Locking*
*For Nonself locking, leave designator blank
Shell Size Series III
9, 11, 13, 15, 17, 19, 21, 23, 25
Finish
Electroless Nickel
OD Cadmium
N
over electroless nickel
W
Straight Cable Clamp - Nonself Locking
Straight Cable Clamp - Self Locking
Military
Shell Size Part Number
Military
Part Number
OD Cadmium
Military
Shell Size Part Number
Military
Part Number
OD Cadmium
Series III
Nickel
Series III
Nickel
M85049/38-9W
M85049/38S-9W
9
M85049/38-9N
M85049/38-11N
M85049/38-13N
M85049/38-15N
M85049/38-17N
M85049/38-19N
M85049/38-21N
M85049/38-23N
M85049/38-25N
9
M85049/38S-9N
M85049/38S-11N
M85049/38S-13N
M85049/38S-15N
M85049/38S-17N
M85049/38S-19N
M85049/38S-21N
M85049/38S-23N
M85049/38S-25N
M85049/38-11W
M85049/38-13W
M85049/38-15W
M85049/38-17W
M85049/38-19W
M85049/38-21W
M85049/38-23W
M85049/38-25W
M85049/38S-11W
M85049/38S-13W
M85049/38S-15W
M85049/38S-17W
M85049/38S-19W
M85049/38S-21W
M85049/38S-23W
M85049/38S-25W
11
13
15
17
19
21
23
25
11
13
15
17
19
21
23
25
M85049/38
90° with Cable Clamp - Nonself Locking
90° with Cable Clamp - Self Locking
Military
Shell Size Part Number
Military
Part Number
OD Cadmium
Military
Shell Size Part Number
Military
Part Number
OD Cadmium
Series III
Nickel
Series III
Nickel
M85049/39-9W
M85049/39S-9W
9
M85049/39-9N
M85049/39-11N
M85049/39-13N
M85049/39-15N
M85049/39-17N
M85049/39-19N
M85049/39-21N
M85049/39-23N
M85049/39-25N
9
M85049/39S-9N
M85049/39S-11N
M85049/39S-13N
M85049/39S-15N
M85049/39S-17N
M85049/39S-19N
M85049/39S-21N
M85049/39S-23N
M85049/39S-25N
M85049/39-11W
M85049/39-13W
M85049/39-15W
M85049/39-17W
M85049/39-19W
M85049/39-21W
M85049/39-23W
M85049/39-25W
M85049/39S-11W
M85049/39S-13W
M85049/39S-15W
M85049/39S-17W
M85049/39S-19W
M85049/39S-21W
M85049/39S-23W
M85049/39S-25W
11
13
15
17
19
21
23
25
11
13
15
17
19
21
23
25
M85049/39
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
30
38999-Style Series I, II, III Connectors*
Backshell - Type P (Potting Boot)
Shell Size
Series ISeries II
A Dia. Max.
.598 (15.19)
.723 (18.36)
.847 (21.51)
.969 (24.61)
1.087 (27.61)
1.211 (30.76)
1.336 (33.93)
1.461 (37.11)
1.586 (40.28)
B Dia. Max.
.434 (11.02)
.548 (13.92)
.673 (17.09)
.798 (20.27)
.899 (22.83)
1.024 (26.01)
1.141 (29.98)
1.274 (32.36)
1.399 (35.53)
9
8
11
13
15
17
19
21
23
25
10
12
14
16
18
20
22
24
A
DIA.
B
How To Order (MS Version)
Shell Size
MS27486
Cannon
Part Number
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
27486-**-1
Part Number
040-0185-000
040-0169-000
040-0170-000
040-0171-000
040-0172-000
040-0173-000
040-0174-000
040-0175-000
040-0176-000
Series I
9
Series II
8
MS27486 - 10 - 1
MS Designation
Shell Size
11
10
13
12
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24
15
14
1 - Straight Cup
17
16
19
18
NOTE: When ordering the MS version you must
specify both MS numbers for the Potting Boot
and the Adapter Ring.
21
20
23
22
25
24
** Only even numbered shell size is applicable.
Potting Boot Adapter Ring
How To Order (MS Version)
Finishes
B
A
N
F
Shell Size
MS27485 - A - 8
Cadmium/Nickel Clear Cadmium/Nickel-O.D Electroless Nickel
Series Series
MS27485
Cannon
I
II
Part Number
Part Number
Miltary Designation
Finish
Cannon
MS
Cannon
MS
Cannon
MS
9
8
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
27485-*-**
237-0887-***
237-0874-***
237-0875-***
237-0876-***
237-0877-***
237-0878-***
237-0879-***
237-0880-***
237-0881-***
-000
A
-001
B
-002
F
A - Cad/Nickel (Clear)
B - Cad/Nickel (O.D)
F - Nickel (Electroless)
11
13
15
17
19
21
23
25
10
12
14
16
18
20
22
24
-000
-000
-000
-000
-000
-000
-000
-000
A
A
A
A
A
A
A
A
-001
-001
-001
-001
-001
-001
-001
-001
B
B
B
B
B
B
B
B
-002
-002
-002
-002
-002
-002
-003
-003
F
F
F
F
F
F
F
F
Shell Size
Series I - 9, 11, 13, 15, 17, 19, 21, 23, 25
Series II - 8, 10, 12, 14, 16, 18, 20 , 22 , 24
NOTE: When ordering the MS version you must
specify both MS numbers for the Potting Boot
and the Adapter Ring.
* MS Finish
** Only even numbered shell size is applicable
*** Cannon Finish
Wire Sealing Plugs
Series III
Size
Series I & II
Size
Part Number
MS27488
Cannon
Color Code
Black
22D
20
22D
20
225-1013-000
225-0070-000
225-0104-000
225-0105-000
MS27488-22-2
MS27488-20-2
MS27488-16-2
MS27488-12-2
Red
16
16
Green
12
12
Orange
Wire sealing plugs meet MS27488 standards. The plugs are color coded according to size for easy
identification. Wire sealing plugs may be ordered separately.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
31
38999-Style Series I, II, III Connectors*
Tools - Crimp
M22520/1-01
CBT-530
M22520/2-01
CBT-565
Pin Contact
Series I/II/III
Socket Contact
Series II
Socket Contact
Series I & III
Contact
Size
Crimp Tool
Locator or Turret
Part Number
Crimp Tool
Locator or Turret
Crimp Tool
Locator or Turret
Part Number
Part Number
Part Number
Part Number
M22520/2-06
M22520/2-06
M22520/1-04
M22520/1-04
M22520/1-04
Part Number
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
M22520/1-01
22D or 22M*
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
M22520/1-01
M22520/2-09
M22520/2-09
M22520/2-01
M22520/2-01
M22520/1-01
M22520/1-01
M22520/1-01
M22520/2-07
M22520/2-07
M22520/1-04
M22520/1-04
M22520/1-04
22*
20
M22520/1-04 OR TH 187
M22520/1-04 OR TH 187
M22520/1-04
16
12
8 Coax
Inner Conductor
RG180
Crimp Tool
Crimp Tool Locator
995-0002-268
995-0002-268
995-0002-268
Outer Conductor
Crimp Tool
Crimp Tool Locator
M22520/5-39B
M22520/5-37B
M22520/5-19B
M22520/2-01
M22520/2-01
M22520/2-01
RG180
M22520/5-01
M22520/5-01
M22520/5-01
RG 174, 179, 316
RG 142
RG 174, 179, 316
RG 142
12 Coax
Inner Conductor
RG174, 179, 316
8 Twinax
Crimp Tool
Crimp Tool Locator
M22520/2-34
Outer Conductor
RG174, 179, 316
Crimp Tool
Crimp Tool Locator
M22520/31-02
M22520/2-01
Crimp Tool
M22520/31-01
Crimp Tool Locator
K709
Center Contact
M22520/2-01
Intermediate Contact M22520/5-01
Y631 Die Closure B
Y631 Die Closure A
Outer Contact
M22520/5-01
* For reference only
Tools - Plastic
Superseded
Military
Part Number
Contact
Size
Cannon
Cannon
Part Number
M81969
Part Number
Insertion
Color Tip
Green
Extraction
Color Tip
Description
CIET-22D-01
CIET-22D-01
CIET-20-10
CIET-16-03
CIET-12-04
CET8-T
22D
274-7048-000
274-7048-000
274-7001-000
274-7002-000
274-7003-000
323-7004-001
274-7003-000
M81969/14-01 MS27534-22D
M81969/14-01 MS27534-22D
White
White
Orange
White
White
—
22M*
Green
Red
20
16
M81969/14-10
M81969/14-03
M81969/14-04
—
MS27534-20
MS27534-16
MS27534-12
—
Blue
12
Yellow
—
8 Coax/Twinax
12 Coax
CIET-12-04
M81969/14-04
M527534-12
Yellow
White
Insertion/Extraction
Insertion tool not required for size 8
Tools - Metal (MS)
Insertion
Extraction
Insertion
Extraction
ITT CANNON
Contact
Size
MS27495
Part Number
ITT CANNON
Part Number
Color
Band
MS27495
Part Number
Color Band
Part Number
995-0001-719
995-0001-721
995-0001-717
995-0001-731
No.1
No.2
White
White
White
White
22D OR 22M*
MS27495 A22M
MS27495 A22
MS27495 A20
MS27495 A16
995-0001-718
995-0001-720
995-0001-716
995-0001-732
Black
Brown
Red
MS27495 R22M
MS27495 R22
MS27495 R20
MS27495 R16
Black
Brown
Red
22*
20
16
Blue
Blue
Band No. 1 indicates tool size.
Band No. 2 indicates removal tool.
For reference only
*
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
32
38999-Style Series I, II, III Connectors*
Assembly Instructions
Wire Stripping
Wire Size
A
Strip insulation from end of wire to be crimped.
(See table for proper stripping dimensions.) Do not
cut or damage wire strands.
A
22D or 22M*
.125 (3.18)
.188 (4.77)
.188 (4.77)
.188 (4.77)
20
16
12
* For reference only
Contact Crimping
VISUAL INSPECTION HOLE
2. Using correct crimp tool and locator, cycle the tool once to be sure the indentors are open. Insert
contact and wire into locator. Squeeze tool handles firmly and completely to insure a proper crimp. The
tool will not release unless the crimp indentors in the tool head have been fully actuated.
1. Insert stripped wire into contact crimp pot.
Wire must be visible thru inspection hole.
. Release crimped contact and wire from tool. Be
certain the wire is visible thru inspection hole in
contact.
Contact Insertion
2. Using proper plastic or metal insertion tool for
corresponding contact, position wire in tip of the tool
so that the tool tip butts up against the contact
shoulder.
3. Press tool against contact shoulder and, with
firm and even pressure, insert wired contact and
tool tip into center contact cavity. A slight click may
be heard as metal retaining tines snap into place
behind contact shoulder.
1. Remove hardware from plug or receptacle and
slip over wire bundle in proper order for
reassembly.
5. After all contacts are inserted, fill any empty
cavities with wire sealing plugs, Ressemble plug
or receptacle hardware.
4. Remove tool and pull back lightly on wire to make
sure contact is properly seated. Repeat operation with
remainder of contacts to be inserted, beginning with
the center cavity and working outward in alternating
rows.
Contact Extraction
1. Remove hardware from plug or receptacle
and slide hardware back along wire bundle.
2. Using plastic or metal extraction tool with proper
color code corresponding to contact size, place wire in
tool.
3. Insert tool into contact cavity until tool tip
bottoms against the contact shoulder, expanding
clip retaining tines.
4. Hold wire firmly in tool and extract wired
contact and tool. Repeat operation for all
contacts to be extracted.
5. Fill any empty wire cavities with wire sealing plugs, and
6. Reassemble plug or receptacle.
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
33
38999-Style Series I, II, III Connectors*
38999-Style Specifications
The following excerpts are some of the parameter requirements of the MIL-DTL-3899 Specification.
Paragraph
Reference
Test
Description
Requirements
After preloading to 3 pounds maximum, the force shall be applied at a rate of approximately 1 pound per second and maintained at full load for 5-10
seconds. No damage to contacts or insert shall result nor shall the contacts be dislocated from their normal position in the connector more than 0.012 inch
under the given load. Failure to meet these requirements shall be cause for rejection.
Contact Retention
4 5 19
Contact Size
22M*
10
22D
10
22*
10
20
15
18
25
Loads in Pounds ± 10%
Coupling Torque
4 5 6
For qualification testing, mating halves shall be coupled and uncoupled, measuring the torques necessary.The torques required to couple and uncouple
mating connector halves shall fall within the limits specifications as follows:
Torque
Torque
Torque
Torque
Shell Size
Max.
Min. Shell Size
Max.
Min. Shell Size
Max.
Min.
Shell Size
Max.
Min.
14
15
16
17
20
20
24
24
4
3
4
3
18
19
20
21
28
28
32
32
5
3
6
5
22
23
24
25
36
36
36
40
7
5
7
5
8/9
10/11
12
8
2
2
2
2
12
16
16
13
Connector halves shall be mated and unmated 250 times for Series II with ground fingers and 500 times for Series I and III at a rate not exceeding 300 cycles
per hour. The test may be performed by hand or by mechanical means, but the coupling ring shall be operated as in normal service. Failure to complete this
test because of mechanical malfunction shall be cause for rejection.
Durability
4 5 7
An insulation resistance test shall be performed on unmated connectors in accordance with MIL-STD-202, Method 302, Test condition B. Measurement shall
be made between three pairs of adjacent contacts and the shell. Failure to meet the minimum requirement of 50,000 megohms for Classes E, P, F, R, and
T shall be cause for rejection.
Insulation Resistance
Vibration
4 5 9
Wired, mated connectors shall be subjected to the vibration test of MIL-STD-202, Method 214, Test Condition II, except that the duration shall be one hour
in each plane. Receptacles shall be mounted on the vibration fixture by normal means. All contacts shall be wired in a series circuit and 100-500 millamperes
of current shall be allowed to flow through the series circuit during vibration. Suitable means shall be employed to monitor the current flow and to indicate
any discontinuity of more than 1 microsecond. The wire bundle shall be damped to the nonvibrating points at least 8 inches from the rear of the connector.
Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening of parts shall
be cause for rejection.
4 5 22
Wired mated connectors shall be subjected to one shock in each direction in each of three mutually perpendicular axes. The pulse shall be approximate half
sine wave of 300g ± 15% magnitude with a duration of 3 ± 1 milliseconds. Receptacles shall be mounted on a shock fixture by normal means. All contacts
shall be wired in a series circuit and 100-150 ma. of current shall flow through the series circuit during shock. Suitable means shall be employed to monitor
the current flow and to indicate any discontinuity of more than 1 microsecond. The wire bundle shall be clamped to fixed points at feast 8 inches from the
rear of the connector, Current discontinuity of 1 microsecond or more, disengagement of the mated connectors, evidence of cracking, breaking, or loosening
of parts shall be cause for rejection.
Shock
4 5 23
Unmated receptacles shall be subjected to 10 cycles of thermal shock in the following manner:
Thermal Shock
4 5 4
The receptacle shall be suspended for 10 + 1 - 0 minutes in the center of a cold water both with a volume of approximately one cubic foot. No
dimension of the bath shall be less than 10 inches. The water temperature shall not exceed 4ºC (39.20ºF)
Step a
The receptacle shall be suspended for 10 1 - 0 minutes in the center of a hot water bath with a volume of approximately one cubic foot. No
dimension of the bath shall be less than 10 inches. The water temperature shall be not less than 94ºC (201ºF).
Step b
The time of transfer from one bath to the other shall not exceed 5 seconds. At the end of the tenth cycle, the receptacle shall have the excess moisture shaken
off and shall then be dried in a forced air oven at 66±5˚C for 15 ±1 minutes. Any evidence of damage resulting from this test shall be cause for rejection.
Mated connectors shall be placed in a container of water at approximately 20ºC and placed in an altitude chamber. All wire ends shall be located within the
chamber and exposed to the chamber atmosphere, but not submerged. The exposed wire ends shall not be sealed. A quantity of salt, 5 percent by weight,
shall be added to make the water conductive. The chamber pressure shall then be reduced to approximately one inch of mercury and maintained for thirty
minutes. The chamber pressure shall then be slowly returned to atmospheric. This shall be considered one cycle. Two additional cycles shall be performed. At
the end of the last cycle, while the mated connectors are still submerged, the Insulation Resistance Test (room temperature), and the High Potential Test (sea
level voltages) shall be performed upon the same circuits. Failure to meet an insulation resistance minimum of 2,000 megohms or any evidence of dielectric
breakdown or -flashover shall be cause for rejection.
Altitude Immersion
Solvent Immersion
4 5 8
Unmated connectors shall be immersed fully in the applicable fluid specified below for 20 hours. After removal from the fluid, each connector shall
remain for one hour in free air at room temperature.
4 5 29
a.) Jet fuel JP-4 to MIL-J-5624 b.) Aircraft lubricating oil to MIL-L-9236
Corrosion
4 5 12
Unmated connectors and individual contact samples shall be subjected to the soft spray of MIL-STD-202, Method 101, Test Condition 8 (tin plated, Class Y
receptacles-24 hours). Immediately after exposure, the surfaces of the specimens shall be thoroughly washed in tap water and dried in a circulatory oven at
a temperature of 38 ±3ºC (100ºF) for a period of approximately 12 hours. Any exposure of basis metal as a result of this test, shall be cause for rejection.
(Series I and 11, finish B; Series III, class W). The wired assembled plugs and receptacles shall be mated and unmated 50 cycles at a rate of 300 cycles per hour
maximum. The mating and unmating shall be accomplished so that the plug and receptacle are completely separated during each cycle. The connectors shall
then be subjected to the salt spray test in accordance with method 1001 of MIL-STD- 1344. The connectors shall be tested for 452 hours mated followed by
48 hours unmated. After the salt spray exposure the remaining number of durability cycles specified in 4.7.7 shall be completed.
Dynamic Salt Spray
4 5 12 2
Temperature Durability 4 5 33
Wired rated connectors shall be subjected to the indicated anbient temperature for a period of 1,000 hours
+3º
+3º
Series I and II (finish A)
150
(302º F)
Series I and II (finish B)
175
(347º F)
-0ºC
-0ºC
+3º
-0ºC
+3º
200
-0ºC
Series III (class W)
175
(347º F)
All other finishes
(392º F)
* For reference only
*DISCLAIMER: Our facility is not currently certified by the DLA and this product is not covered by
the QPL/QML. Mil-Spec part numbers are only for cross reference to the Commercial Equivalent.
www.ittcannon.com
34
Product Safety and Warranty
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials.
Electrical connectors may be damaged
in transit to the customers, and damage
may result in creation of hazards. Products
should therefore be examined prior to instal-
lation/use and rejected if found to be dam-
aged. Proper lifting techniques shall be used
for handling shipping cartons.
(iv) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
Electrical connectors and individual com-
ponents do not release or otherwise result
in exposure to hazardous chemicals under
normal conditions of use and fall under
the definition of “Article,” under the
Hazard Communication Standard, 29 CFR
1910.1200, and are not considered hazard-
ous materials.
Commodities in this catalog may be con-
trolled for export or re-export under the
Export Administration Regulations (EAR),
Nuclear Regulatory Commission (NRC)
Regulations, or by the International Traffic
in Arms Regulations (ITAR) when specifically
designed, modified or configured for mili-
tary use.
4. DISPOSAL
Please recycle, reclaim or dispose of connec-
tors and individual components in accor-
dance with local, state and federal laws.
Incineration of certain materials may release
noxious or even toxic fumes..
Solder and fluxes can be hazardous if inhaled
or absorbed through the skin and should
only be used as recommended by the manu-
facturer. Please consult your solder and flux
manufacturer for more specific application
recommendations.
5. APPLICATION
ITT Cannon manufactures high quality
products. However, these products are
intended to be used in accordance with the
specifications in this publication. Any use or
application that deviates from the stated
operating specifications is not recommend-
ed and may be unsafe. No information and
data contained in this publication shall be
construed to create any liability on the part
of ITT.
Connectors with exposed contacts should
not be selected for use on the current sup-
ply side of an electrical circuit, because an
electric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be
taken to ensure that such voltages cannot
be transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before mak-
ing live, to have no damage to metal parts
or insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit resis-
tance and continuity check should be made
to make certain that there are no high resis-
tance joints or spurious conducting paths.
Always use the specified application tools,
cleaning materials and assembly instructions
documented in the Data Sheet/Catalog. Do
not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of
the connector or careless use of metal tools
or conductive fluids, or transit damage to
any of the component parts may cause elec-
tric shock or burns. Live circuits must not be
broken by separating mated connectors as
this may cause arcing, ionization and burn-
ing. Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect appli-
cation tools or from poor quality soldering
or slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can cause
breakdown of insulation and hence electric
shock. If heating is allowed to continue it
intensifies by further increasing the local
resistance through loss of temper of spring
contacts, formation of oxide film on contacts
and wires and leakage currents through car-
bonization of insulation and tracking paths.
Fire can then result in the presence of com-
bustible materials and this may release nox-
ious fumes. Overheating may not be visually
apparent. Burns may result from touching
overheated components.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating
voltage. The admissible operating voltages
depend on the individual applications and
the valid national and other applicable safe-
ty regulations.
For this reason the air and creepage path
data are only reference values. Observe
reduction of air and creepage paths due to
PC board and/or harnessing.
3. HANDLING
Care must be taken to avoid damage
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
to any component parts of electrical connec-
tors during installation and use. Although
there are normally no sharp edges, care
must be taken when handling certain com-
ponents to avoid injury to fingers. Always
wear safety glasses to avoid potential injury
to eyes during cleaning, soldering, fiber
preparation, etc.
(iii) Pressure
All pressure information given are differen-
tial pressure limits. The specific differential
pressure limits, across the connector inter-
face, are documented in the Data Safety/
catalog
www.ittcannon.com
35
ITT Cannon
ITT is a focused multi-industrial company that designs and man-
ufactures highly engineered critical components and customized
technology solutions. Our customers in the energy, transpor-
tation and industrial markets depend on us to solve their most
critical problems, and we focus on partnering with them to
find solutions to their unique challenges. Founded in 1920, ITT
is headquartered in White Plains, N.Y., with employees in more
than 35 countries.
Kanban pull systems, and automated electrical, mechanical,
and optical test and inspection equipment. The combination of
our manufacturing strength and our advanced manufacturing
facilities allows ITT to offer products at market driven prices.
Our capabilities, especially in robotics, computerized precision
tooling, Kaizen Project Management, Six Sigma tools, and test-
ing, give ITT the most optimized global manufacturing
footprint in the interconnect industry.
Our connector portfolio remains the most extensive in the
industry, offering a reliable and cost effective range of inter-
connect solutions with the brands of Cannon, VEAM and BIW
Connector Systems. Continuous investment in technology and
research & development have enabled ITT to provide new, inno-
vative products and solutions to markets including:
The Custom Difference
As the industry leader in harsh environment interconnect appli-
cations, ITT’s world class engineering teams will work directly
with our customers to design and develop cost effective solu-
tions for their applications. In many cases we may modify one
of our standard designs to ensure a highly reliable solution
where timing is critical. Yet, in those cases where a complete
custom interconnect solution is required, ITT will work with
our customer’s Engineers to design an interconnect solution
which will be cost effective yet highly reliable. As professional
consultants, our Engineering teams will provide a thorough
systems and mechanical analysis of any proposed solution.
These analyses provide our customers with sophisticated elec-
trical signal and mechanical characterizations to determine
the best solution for their application.
• Automotive
• Computer & Consumer Electronics
• Industrial/Instrumentation
• Military & Aerospace
• Oil & Gas
• Telecommunications/Wireless Handheld Devices
• Transportation
When you specify a Cannon, VEAM or BIW Connector Systems
connector, you can rely on products that are designed, devel-
oped, and manufactured to the highest quality and reliability
standards. This tradition of excellence is based on ITT’s corpo-
rate culture of operating its businesses under the principles
of Six Sigma. At ITT, Six Sigma is not just a quality philosophy
but a complete corporate culture that drives the entire busi-
ness. Our Value Based Management and Value Based Product
Development systems are two cornerstones that allow for the
development of both leadership and product engineering prin-
ciples, ensuring our industry leading products are developed to
the accepted market driven lead times. These principles have
allowed ITT to become the market leader in all of our business
portfolios.
RoHS Compliance Information
ITT has implemented a strict parts control plan for all ITT
electronics plants worldwide that allows the Cannon, VEAM,
and BIW Connector Systems product portfolios to meet the
requirements of the European Union Directive 2002/95/EC bet-
ter known as the Reduction of Hazardous Substances (RoHS)
initiative. As appropriate, specific Cannon, VEAM, and BIW
Connector Systems products may be ordered with an R prefix
number which insures our customers will receive RoHS com-
pliant parts for their commercial electronics applications and
equipment. Since most RoHS hazardous substances center
around specific metal plating and lead solder coatings, ITT’s
products for RoHS compliance are available in the following
plating finishes: electroless nickel, stainless steel, anodize over
aluminum and gold plating. It should be noted that gold plat-
ing would be recommended as the replacement for tin-lead
solder when ordering board mount connectors.
Six Sigma Manufacturing
ITT Cannon operates manufacturing facilities in the United
States, Germany, Italy, Mexico, China and Japan, all of which
have particular product area strengths allowing ITT to offer a
truly global footprint to our customers. Our facilities are world
class and accommodate full vertical integration utilizing the
latest manufacturing technologies including: automated and
robotic machining centers, Super Market manufacturing cells,
www.ittcannon.com
36
Circular/Filter/Hermetic Connectors
As a world leader in circular, filter, and hermetic connectors, ITT
can leverage its design and manufacturing expertise to fit
virtually any application. Our expertise includes fast positive
mating for a wide range of military applications, as well as
numerous sizes and contact configurations for various harsh
environments.
D-Subminiature Connectors
Cannon invented D-sub connectors in 1952. Our family
of D-Subs now includes combinations of signal, power and RF, as
well as severe service sealed connectors. Cannon D-Subs are
available with an extensive line of backshells and accessories
and are one of the most economical shielded connector
solutions available.
Fiber Optic Connectors and Cable Assemblies
Cannon fiber optic solutions provide an excellent performance/
cost value. Performance may be tailored to the end system, with
our use of superior materials and bonding agents providing
highly effective solutions. Our wide variety of products include
fiber optic hybrid contacts, multi-channel, rack and panel and hi-
rel assemblies.
Microminiature Connectors
Developed first by Cannon in the 1960s, Microminiature Connectors
offer high performance and reliability with exceptional versatility.
Available in rectangular, circular and strip-style configurations for
countless applications, many of our highly engineered
Microminiature connector products meet critical customer demands
in multiple applications across the Aerospace & Defense industry.
Rack and Panel Connectors
Pioneered by Cannon during the 1930s, our Rack & Panel
Connectors offer an unmatched variety of shell configurations and
insert arrangements, as well as materials, plating and contact
options. Today, we are recognized as an industry leader, offering
an unparalleled range of off-the-shelf and custom Rack & Panel
products to align with customer needs.
RF Connectors
ITT Cannon has been providing interconnect products to the
Microwave and RF industry since 1963 (formerly The Sealectro
Corporation). The RF 50 & 75 Ohm product lines cover UHF band
through Ku band requirements. These connectors and cable
assemblies are available with a thread type, snap type, bayonet
type or slide on coupling method. The frequencies range from DC
to 18+ GHz.
ITT Cannon is a leading global manufacturer of connector products serving international
customers in the aerospace and defense, medical, energy, transportation and industrial end
markets. Whether delivering critical specs to aircraft pilots, streaming data through
communications satellites or enabling ultrasound technology that gives an expectant mother the
first glimpse of her unborn child, Cannon connects the world’s most important information with the
people who need it. To learn more, visit www.ittcannon.com
Connect with your ITT Cannon
representative today or visit us at
www.ittcannon.com
Connect with the experts.
Whether communicating with our soldiers, or with our first responders saving
lives, ITT Cannon connects the world’s most important information with those
who need it.
CHINA—Shenzhen City
GERMANY—Weinstadt
HONG KONG
ITALY—Lainate
+39.02938721
+86.755.2726.7888
+49.7151.699.0
+852.2732.2720
UK—Basingstoke
+44.1256.311200
JAPAN—Kanagawa
KOREA—Seoul
TAIWAN—Taipei
+81.462.57.2010
+82.2.7027111
+886.2.25452020
USA—Irvine, CA
USA—Watertown, CT
+1.800.854.3028
+1.860.274.9681
The “ITT Engineered Blocks“ symbol, “Engineered for life," “ITT” and “Cannon“ are registered trademarks of ITT Inc.
Specification and other data are based on information available at the time of printing, and are subject to change without
notice.
© 2017 ITT Inc
ITT Cannon 38999-Style Connectors Catalog | 20170730
Our facility is not currently certified by the DLA and this product is not covered by the QPL/QML.
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明