EPM705900SCS0 [JDSU]

Forward and Return Path Analog CATV Detector Modules; 前向和返回路径模拟CATV探测器模块
EPM705900SCS0
型号: EPM705900SCS0
厂家: JDSU    JDSU
描述:

Forward and Return Path Analog CATV Detector Modules
前向和返回路径模拟CATV探测器模块

有线电视
文件: 总6页 (文件大小:261K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
COMMUNICATIONS COMPONENTS  
Forward and Return Path Analog CATV Detector Modules  
EPM 7xx Series  
Key Features  
• Electro-optical  
-
-
-
Low intermodulation distortion  
High responsivity  
Low back reflection  
• Packaging  
-
-
Single mode 900 µm fiber with or without a connector  
Single mode 250 µm fiber without a connector  
Applications  
The EPM 7xx series are high quality analog photodetectors designed for forward  
path (EPM 745) and return path (EPM 705) AM CATV applications. These  
coaxial modules are optically aligned to optimize performance and balance the  
parameters of responsivity, distortion and back reflection.  
• AM fiber optic CATV receivers to  
550 MHz (EPM 705) and 860 MHz  
(EPM 745)  
• Multi-channel fiber optic transmission  
The photodetector die is fabricated with a proprietary InGaAs process in our  
wafer fab and assembled into a hermetically-sealed package with an antireflective-  
coated lens. A stainless steel bushing is used to actively couple the fiber to the package.  
The fiber is reinforced with a rubber boot which relieves fiber bending stresses.  
The EPM 7xx series can be produced without a connector or with a variety of  
industry standard connectors. They are also available with a mounting bracket  
which allows both vertical panel mounting and horizontal flush-to-board mounting.  
NORTH AMERICA: 800 498-JDSU (5378)  
WORLDWIDE: +800 5378-JDSU  
WEBSITE: www.jdsu.com  
FORWARD AND RETURN PATH  
ANALOG CATV DETECTOR MODULES  
2
Dimensions Diagram  
(Specifications in mm unless otherwise noted.)  
EPM 705 with Dual Mount Bracket  
EPM 705 without Dual Mount Bracket  
EPM 745 with Dual Mount Bracket  
EPM 745 without Dual Mount Bracket  
FORWARD AND RETURN PATH  
ANALOG CATV DETECTOR MODULES  
3
Figure 1: EPM 705  
Figure 2: EPM 745  
Dark Current vs. Reverse Bias  
Dark Current vs. Reverse Bias  
1E-05  
85 ˚C  
1E-08  
1E-09  
1E-10  
1E-11  
1E-12  
65 ˚C  
1E-06  
45 ˚C  
25 ˚C  
1E-07  
1E-08  
1E-09  
1E-10  
1E-11  
80 ˚C  
60 ˚C  
40 ˚C  
20 ˚C  
0 ˚C  
0
5
10  
15  
20  
25  
30  
0
5
10  
15  
20  
25  
Reverse Voltage (V)  
Reverse Voltage (V)  
Figure 3: EPM 705  
Figure 4: EPM 745  
Capacitance vs. Reverse Bias  
23˚C  
Capacitance vs. Reverse Bias  
23˚C  
1.4  
1.2  
1.0  
0.8  
0.6  
0.4  
0.2  
0.0  
0.5  
0.4  
0.3  
0.2  
0.1  
0.0  
0
2
4
6
8
10  
12  
2
4
6
8
12  
10  
0
Reverse Voltage (V)  
Reverse Voltage (V)  
FORWARD AND RETURN PATH  
ANALOG CATV DETECTOR MODULES  
4
Figure 5: EPM 745  
Figure 6: EPM 745  
IM2 vs. Input Optical Power  
Bias = -12V; Mod. Index = 0.7  
Typical Values  
IM2 vs. Bias Voltage  
Input Power = 0 dBm; Mod. Index = 0.7  
Typical Values  
-65  
-70  
-75  
-80  
-85  
-90  
-65  
-70  
-75  
-80  
-85  
-90  
-95  
-4  
-2  
0
2
4
6
8
0
2
4
6
8
10  
12  
14  
Input Power (dBm)  
Reverse Voltage (dBm)  
Figure 7: EPM 705/745  
EPM 745 Equivalent Circuit  
Typical Spectral Response  
23 ˚C  
1.0  
0.8  
0.6  
0.4  
0.2  
0.0  
800  
1000  
1200  
1400  
1600  
1800  
Wavelength (nm)  
FORWARD AND RETURN PATH  
ANALOG CATV DETECTOR MODULES  
5
Specifications  
(Temperature = 25°C, VR = 5 V unless noted. All specifications without connector.)  
Parameter  
Conditions  
EPM 705  
EPM 745  
Responsivity  
λ = 1310 nm  
λ = 1550 nm  
Minimum  
Minimum  
Maximum  
Maximum  
Maximum  
Maximum  
Typical  
0.80 A/W  
0.85 A/W  
-70 dBc 1  
-40 dB  
0.85 A/W  
0.90 A/W  
-75 dBc 2  
-45 dB  
Distortion product IM2  
Back reflection  
Dark current  
5.0 nA  
1.0 nA  
Capacitance3  
0.75 pF  
2.0 GHz  
1.0 m  
0.35 pF  
3.0 GHz  
1.0 m  
Bandwidth4  
Single mode fiber 900 µm  
8.7/125 µm core/cladding  
Minimum  
Maximum  
1.5 m  
1.5 m  
1. IM  
2. IM  
2
2
measured at V  
R
R
= 12 V, Pavg = 0 dBm, MI = 0.7, Rload = 50 , f  
1
1
+ f  
+ f  
2
2
= 324.25 MHz, f  
= 850.25 MHz, f  
1
1
- f  
- f  
2
2
= 54.25 MHz.  
= 50.25 MHz.  
measured at V  
= 12 V, Pavg = 0 dBm, MI = 0.7, Rload = 50 , f  
3. Measured with case grounded.  
4. -3 dB point into a 50 load.  
Maximum Ratings  
Parameter  
Specification  
Forward current1  
Minimum  
Minimum  
Minimum  
Minimum  
Minimum  
Maximum  
Minimum  
Minimum  
Maximum  
10 mA  
10 mA  
25 V  
100 mW  
-40°C  
85°C  
260°C  
-40°C  
85°C  
Reverse current2  
Reverse voltage  
Power dissipation  
Operating case temperature  
Soldering temperature  
Storage temperature  
1. Under forward bias, current at which device may be damaged.  
2. Under reverse bias, current at which device may be damaged.  
FORWARD AND RETURN PATH  
ANALOG CATV DETECTOR MODULES  
Ordering Information  
For more information on this or other products and their availability, please contact your local JDSU account manager or  
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at  
customer.service@jdsu.com.  
Sample: EPM 705 900 FCA DMB  
+
+
+
+
EPM 7  
Code  
05  
45  
Model  
Code  
250  
900  
Buffer  
250 µm buffer  
900 µm buffer  
Code  
0
DMB  
Bracket  
No bracket  
with dual mount bracket  
Return path CATV module  
Forward path CATV module  
Code  
NC  
Connector  
No connector  
FCS  
FCA  
SCS  
SCA  
FC/SPC connector  
FC/APC connector  
SC/SPC connector  
SC/APC connector  
Precautions for Use  
ESD protection is imperative. Use of grounding straps, anti-static mats, and other standard ESD protective equipment is  
recommended when handling or testing an InGaAs PIN or any other junction photodiode.  
Soldering temperature of the leads should not exceed 260 °C for more than 10 seconds.  
Fiber pigtails should be handled with less than 10 N pull and with a bending radius greater than 1 inch.  
All statements, technical information and recommendations related to the products herein are based upon information believed to be  
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any  
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves  
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including  
withdrawal at any time of  
a product offered for sale herein. JDSU makes no representations that the products  
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are  
trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. ©2006 JDS Uniphase  
Corporation. All rights reserved. 30137543 Rev. 001 05/06 EPM7XX.DS.CC.AE  
NORTH AMERICA: 800 498-JDSU (5378)  
WORLDWIDE: +800 5378-JDSU  
WEBSITE: www.jdsu.com  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY